-- -- she-mta-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Wednesday, September 17, 2008 at 09:42:17 -- -- Start of ClearCase branch-information of current release: -- she-mta-mib.mib /main/she_r2.8_grf/2 -- End of ClearCase branch-information. SHE-MTA-MIB DEFINITIONS ::= BEGIN IMPORTS she FROM AN-SHE-MIB InterfaceIndex FROM IF-MIB SheControlStatusType FROM SHE-TC-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF mib-2, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; sheMta MODULE-IDENTITY LAST-UPDATED "200809171000Z" -- September 17, 2008 at 10:00 GMT ORGANIZATION "Nokia Siemens Network" CONTACT-INFO "COO IP Transport 14 Jiuxianqiao Road Beijing wei3.zhao@nsn.com ######################### gerd.barchmann@nsn.com" DESCRIPTION " Definition of mta feature control command" REVISION "200504280901Z" -- April 28, 2005 at 09:01 GMT DESCRIPTION "Definition of mta feature control command." REVISION "200803190901Z" -- March 19, 2008 at 09:01 GMT DESCRIPTION "Bring them to common SHE MIB package with R2.8." REVISION "200804081157Z" -- April 08, 2008 at 11:57 GMT DESCRIPTION "Correct definition of ControlRequestType and ControlRequestResultType." REVISION "200809170851Z" -- September 17, 2008 at 08:51 GMT DESCRIPTION "Smal corrections for defined values." ::= { she 10 } -- -- Textual conventions -- SheMtaControlRequestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type for mta control commands." SYNTAX INTEGER { mtaActivateInward(1), mtaActivateOutward(2), mtaActivateMonitoring(3), mtaActivateForceInward(4), mtaActivateForceOutward(5), mtaDeactivate(6), mtaSetAutoFreeTimer(7) } -- GENERAL VALUES FOR USER COMMAND HANDLING -- RETURN VALUES SheMtaControlRequestResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for mta control commands." SYNTAX INTEGER { mtaNotSupported(8), mtaIUtoSPBnotFound(9), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37) } -- -- Node definitions -- -- MIB contains the following groups sheMtaControl OBJECT IDENTIFIER ::= { sheMta 1 } -- return values to be defined -- GENERAL VALUES FOR USER COMMAND HANDLING -- RETURN VALUES -- -------------------------------------------------------------- -- Metallic Test Access control group for ADSL -- -------------------------------------------------------------- sheMtaCtrlControlReq OBJECT-TYPE SYNTAX SheMtaControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the metallic test access (MTA) feature (activate or deactivate) at ADSL line interfaces. MTA is provided only for ADSL lines and for one line at a given time. The plugin unit IU must be unlocked. If MTA has been activated for a line the command command mtaActivate implicitly deactivates MTA for that line and activates it on the new line. MTA is service affecting. The command mtaDeactivate terminates MTA. MTA is terminated by the DSLAM autonomously if the IU will be locked or performs a restart." ::= { sheMtaControl 1 } sheMtaCtrlControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheMtaControl 2 } sheMtaCtrlIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION " The interface index of the ADSL central PPTP for which metallic test access shall be activated. " ::= { sheMtaControl 3 } sheMtaCtrlIfIndexUnderTest OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION " If not 0 the interface index of the ADSL central PPTP for which metallic test access is already activated. " ::= { sheMtaControl 4 } sheMtaAutoFreeTimer OBJECT-TYPE SYNTAX Unsigned32 (50..600) MAX-ACCESS read-write STATUS current DESCRIPTION " The time duration of relay switch on. " DEFVAL { 300 } ::= { sheMtaControl 5 } sheMtaCtrlControlReqResult OBJECT-TYPE SYNTAX SheMtaControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last user command. " ::= { sheMtaControl 6 } sheMtaCtrlControlTimeStamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheMtaControl 7 } sheMtaNotifications OBJECT IDENTIFIER ::= { sheMta 2 } -- -------------------------------------------------------------- -- Metallic Test Access Notifications for ADSL -- -------------------------------------------------------------- sheMtaAutoFreeEvent NOTIFICATION-TYPE OBJECTS { sheMtaCtrlControlStatus, sheMtaCtrlIfIndex, sheMtaAutoFreeTimer, sheMtaCtrlControlReqResult, sheMtaCtrlControlTimeStamp } STATUS current DESCRIPTION " End of mta grasping command and free testing subscriber line. " ::= { sheMtaNotifications 1 } sheMtaMibConformance OBJECT IDENTIFIER ::= { sheMta 100 } sheMtaMibCompliances OBJECT IDENTIFIER ::= { sheMtaMibConformance 1 } sheMtaMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheMtaMibControlGroup, sheMtaMibNotificationGroup } ::= { sheMtaMibCompliances 1 } sheMtaMibGroups OBJECT IDENTIFIER ::= { sheMtaMibConformance 2 } sheMtaMibControlGroup OBJECT-GROUP OBJECTS { sheMtaCtrlControlReq, sheMtaCtrlControlStatus, sheMtaCtrlIfIndex, sheMtaCtrlIfIndexUnderTest, sheMtaAutoFreeTimer, sheMtaCtrlControlReqResult, sheMtaCtrlControlTimeStamp } STATUS current DESCRIPTION "Description." ::= { sheMtaMibGroups 1 } sheMtaMibNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheMtaAutoFreeEvent } STATUS current DESCRIPTION "Description." ::= { sheMtaMibGroups 2 } END -- -- she-mta-mib.mib --