-- -- she-melt-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88 -- Thursday, July 16, 2009 at 16:30:04 -- -- Start of ClearCase branch-information of current release: -- she-melt-mib.mib /main/she_r3.5_grf/5 -- End of ClearCase branch-information. SHE-MELT-MIB DEFINITIONS ::= BEGIN IMPORTS she FROM AN-SHE-MIB ifIndex, InterfaceIndex FROM IF-MIB SheControlStatusType FROM SHE-TC-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; sheMelt MODULE-IDENTITY LAST-UPDATED "200907161600Z" -- July 16, 2009 at 16:00 GMT ORGANIZATION "Nokia Siemens Networks" CONTACT-INFO "Gerd Barchmann COO BCS DSLAM RD SDE HW1 gerd.barchmann@nsn.com" DESCRIPTION " Definition of MELT (metallic line testing) feature control commands and results. New supported with R3.7M." REVISION "200812091400Z" -- December 09, 2008 at 14:00 GMT DESCRIPTION "First issue for SHE R3.7M." REVISION "200901211000Z" -- January 21, 2009 at 10:00 GMT DESCRIPTION "Update after review. Define more detailed measurment result types. " REVISION "200903131136Z" -- March 13, 2009 at 11:36 GMT DESCRIPTION "Remove wetting current settings." REVISION "200904281416Z" -- April 28, 2009 at 14:16 GMT DESCRIPTION "Correct definition of SheMeltTestResultValidType." REVISION "200907161626Z" -- July 16, 2009 at 16:26 GMT DESCRIPTION "Modify unit of foreignCurrent result parameters from mA to A. " ::= { she 24 } -- -- Textual conventions -- SheMeltTestRequestIfStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The MELT state of a port (IfIndex). idle -> no test running and test was never started since IU reset beingTested -> test is running applyingTestTone -> test tone activated on line testSucceeded(5) -> line idle and MELT was successful finished testAborted -> line idle and MELT aborted by operator or internal failure/timeout " SYNTAX INTEGER { idle(1), beingTested(2), applyingTestTone(3), idleTestSucceeded(5), idleTestAborted(6) } SheMeltTestRequestIuStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The MELT state type of concerned IU. idle -> no port of this iu under test - new test could be started beingTested -> one port of this iu is currently under test - no new test could be started applyingTestTone -> one port of this iu has currently a test tone activated - no new test could be started " SYNTAX INTEGER { idle(1), beingTested(2), applyingTestTone(3) } SheMeltControlReqType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type for MELT test commands." SYNTAX INTEGER { noRequest(0), setMeltTestParameters(1), startMeltTest(2), stopMeltTest(3), activateTestTone(4), deactivateTestTone(5), setMeltTestRequestTestToneIndex(8), createMeltTestToneEntry(10), modifyMeltTestToneEntry(11), deleteMeltTestToneEntry(12) } SheMeltControlReqResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for MELT command." SYNTAX INTEGER { meltRequestControlReqNotSupported(2), commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37) } SheMeltTestResultStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Status of the information contained in MeltTestResultTable. Values: notTested -> port was not tested since reset, all results not valid testFailed -> port was tested but test failed, all results not valid testSucceeded -> port was tested successfuly, check single result valid information" SYNTAX INTEGER { notTested(0), testFailed(1), testSucceeded(2) } SheMeltTestResultValidType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid information for each single MELT result value. Values: invalid -> the shown result is not valid (maybe the test could not run because of external conditions) valid -> trusted result aboveLimitOfMeasurementRange -> result is above HW measurement range belowLimitOfMeasurementRange -> result is below HW measurement range " SYNTAX INTEGER { invalid(0), valid(1), aboveLimitOfMeasurementRange(2), belowLimitOfMeasurementRange(3) } SheMeltTestResultCheckPpaType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used for result of CheckPpa test." SYNTAX INTEGER { notTested(0), notDetected(1), detectedRightPolarity(2), detectedWrongPolarity(3) } SheMeltTestResultCheckType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used for result of CheckSplitter and CheckIad test." SYNTAX INTEGER { notTested(0), notDetected(1), detected(2) } SheMeltTestFrequencyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "used for configuration of test frequency" SYNTAX Unsigned32 (10..32000) SheMeltTestToneFrequencyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "used to configure used test tones" SYNTAX Unsigned32 (100..4000) SheMeltTestToneIndexType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to identify a test tone set (assignment interface - test tone index)." SYNTAX Unsigned32 (1..32) SheMeltTestSignalLevelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "used to configure test frequency and test tone level's" SYNTAX Integer32 (-20..3) SheMeltTestResultCapacityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid value range for Capacity measurement." SYNTAX Integer32 (0..100000) SheMeltTestResultResistanceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid value range for resistance measurement." SYNTAX Integer32 (0..20000000) SheMeltTestResultACVoltageType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid value range for AC voltage measurement." SYNTAX Integer32 (0..4000) SheMeltTestResultACVoltageFrequencyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid value range for AC voltage frequency measurement." SYNTAX Integer32 (0..70) SheMeltTestResultDCVoltageType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid value range for DC voltage measurement." SYNTAX Integer32 (-4000..4000) SheMeltTestResultForeignCurrentType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid value range for current measurement." SYNTAX Integer32 (0..40) SheMeltTestResultConductanceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Valid value range for conductance and Susceptance measurement." SYNTAX Integer32 (0..10000000) -- -- Node definitions -- -- ----------------------------------------------------------------- -- sheMeltTestRequestObjects -- ----------------------------------------------------------------- -- sheMeltTestRequestObjects OBJECT IDENTIFIER ::= { sheMelt 1 } -- Parameters for MELT test values which depend on test conditions. sheMeltTestParameter OBJECT IDENTIFIER ::= { sheMeltTestRequestObjects 1 } sheMeltTestParameterFreq1 OBJECT-TYPE SYNTAX SheMeltTestFrequencyType UNITS "Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter contains the used frequency 1 for MELT impedance/admittance test." DEFVAL { 1000 } ::= { sheMeltTestParameter 1 } sheMeltTestRequestStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMeltTestRequestStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table contains the testing status of each IfIndex. Only indeces of MELT feature supporting interfaces are listed in this table!" ::= { sheMeltTestRequestObjects 2 } sheMeltTestRequestStateEntry OBJECT-TYPE SYNTAX SheMeltTestRequestStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in sheMeltTestRequestIfTable." INDEX { ifIndex } ::= { sheMeltTestRequestStateTable 1 } SheMeltTestRequestStateEntry ::= SEQUENCE { sheMeltTestRequestIfState SheMeltTestRequestIfStateType, sheMeltTestRequestIuState SheMeltTestRequestIuStateType, sheMeltTestRequestTestToneIndex SheMeltTestToneIndexType } sheMeltTestRequestIfState OBJECT-TYPE SYNTAX SheMeltTestRequestIfStateType MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT status of this interface. Only one port of one IU could be under test at time. Ports on different IU's could be under test at the same time. Check the corresponding sheMeltTestRequestIuState for this precondition. NOTE: Wetting current injection will be autonomously interrupted, if MELT or testTone insertion is started (WC configuration himself via sheXdslMib or sheShdslMib) for this interface as long as the test is running. Forgetting to stop test tone insertion will inhibit wetting current!" DEFVAL { idle } ::= { sheMeltTestRequestStateEntry 1 } sheMeltTestRequestIuState OBJECT-TYPE SYNTAX SheMeltTestRequestIuStateType MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT status of IU where this interface is located on. Every port must know whether this IU is under melt test already or not, in order to decide if the melt test request on this port can be accepted. Only one port of one IU could be under test at time. Ports on different IU's could be under test at the same time." DEFVAL { idle } ::= { sheMeltTestRequestStateEntry 2 } sheMeltTestRequestTestToneIndex OBJECT-TYPE SYNTAX SheMeltTestToneIndexType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter points on a valid entry of sheMeltTestToneTable. These configuration is needed for test tone insertion on this line. One default profile with index 1 will always exist and is assigned per default to each line!" DEFVAL { 1 } ::= { sheMeltTestRequestStateEntry 3 } -- ----------------------------------------------------------------- -- MELT Test request control group -- ----------------------------------------------------------------- -- sheMeltTestRequestStateControl OBJECT IDENTIFIER ::= { sheMeltTestRequestObjects 3 } sheMeltTestRequestControlReq OBJECT-TYPE SYNTAX SheMeltControlReqType MAX-ACCESS read-write STATUS current DESCRIPTION "setMeltTestParameters (1): sheMeltTestRequestControlParameterFreq1 startMeltTest (2): sheMeltTestRequestControlIndex stopMeltTest (3): sheMeltTestRequestControlIndex activateTestTone (4): sheMeltTestRequestControlIndex deactivateTestTone (5): sheMeltTestRequestControlIndex setMeltTestRequestTestToneIndex (8): sheMeltTestRequestControlIndex sheMeltTestRequestControlTestToneIndex" ::= { sheMeltTestRequestStateControl 1 } sheMeltTestRequestControlIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The interface index of the DSL central PPTP which should be configured." ::= { sheMeltTestRequestStateControl 2 } sheMeltTestRequestControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a control request." ::= { sheMeltTestRequestStateControl 3 } sheMeltTestRequestControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheMeltTestRequestStateControl 4 } sheMeltTestRequestControlReqResult OBJECT-TYPE SYNTAX SheMeltControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheMeltTestRequestStateControl 5 } sheMeltTestRequestControlReqTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheMeltTestRequestStateControl 6 } sheMeltTestRequestControlTestToneIndex OBJECT-TYPE SYNTAX SheMeltTestToneIndexType MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheMeltTestRequestStateControl 7 } sheMeltTestRequestControlParameterFreq1 OBJECT-TYPE SYNTAX SheMeltTestFrequencyType UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Look at basic parameter group." ::= { sheMeltTestRequestStateControl 8 } -- ----------------------------------------------------------------- -- sheMeltTestToneObjects -- ----------------------------------------------------------------- -- sheMeltTestToneObjects OBJECT IDENTIFIER ::= { sheMelt 2 } sheMeltTestToneTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMeltTestToneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table contains a set of parameters for test tone generation. These entries could be assigned to each interface. One default entry exist which could NOT be modified or deleted!" ::= { sheMeltTestToneObjects 1 } sheMeltTestToneEntry OBJECT-TYPE SYNTAX SheMeltTestToneEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in sheMeltTestToneTable." INDEX { sheMeltTestToneIndex } ::= { sheMeltTestToneTable 1 } SheMeltTestToneEntry ::= SEQUENCE { sheMeltTestToneIndex SheMeltTestToneIndexType, sheMeltTestToneFreq1 SheMeltTestToneFrequencyType, sheMeltTestToneFreq2 SheMeltTestToneFrequencyType, sheMeltTestToneLevel SheMeltTestSignalLevelType } sheMeltTestToneIndex OBJECT-TYPE SYNTAX SheMeltTestToneIndexType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is index of sheMeltTestToneTable. This configuration is needed for test tone insertion on the line. One default profile with index 1 will always exist and is assigned per default to each line!" ::= { sheMeltTestToneEntry 1 } sheMeltTestToneFreq1 OBJECT-TYPE SYNTAX SheMeltTestToneFrequencyType UNITS "Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "The test tone frequency 1 of test tone set." DEFVAL { 800 } ::= { sheMeltTestToneEntry 2 } sheMeltTestToneFreq2 OBJECT-TYPE SYNTAX SheMeltTestToneFrequencyType UNITS "Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "The test tone frequency 2 of test tone set." DEFVAL { 800 } ::= { sheMeltTestToneEntry 3 } sheMeltTestToneLevel OBJECT-TYPE SYNTAX SheMeltTestSignalLevelType UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The test tone level of test tone set." DEFVAL { 0 } ::= { sheMeltTestToneEntry 4 } -- ----------------------------------------------------------------- -- MELT Test tone control group -- ----------------------------------------------------------------- -- sheMeltTestToneControl OBJECT IDENTIFIER ::= { sheMeltTestToneObjects 2 } sheMeltTestToneControlReq OBJECT-TYPE SYNTAX SheMeltControlReqType MAX-ACCESS read-write STATUS current DESCRIPTION "createMeltTestToneEntry (10): (index will autonomously generated by NE) sheMeltTestToneControlFreq1 sheMeltTestToneControlFreq2 sheMeltTestToneControlLevel modifyMeltTestToneEntry (11): sheMeltTestToneControlIndex sheMeltTestToneControlFreq1 sheMeltTestToneControlFreq2 sheMeltTestToneControlLevel deleteMeltTestToneEntry (12): sheMeltTestToneControlIndex " ::= { sheMeltTestToneControl 1 } sheMeltTestToneControlIndex OBJECT-TYPE SYNTAX SheMeltTestToneIndexType MAX-ACCESS read-write STATUS current DESCRIPTION "The table index of the TestToneTable which should be configured. Default tone-set 1 could not be modified or deleted!" ::= { sheMeltTestToneControl 2 } sheMeltTestToneControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a control request." ::= { sheMeltTestToneControl 3 } sheMeltTestToneControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheMeltTestToneControl 4 } sheMeltTestToneControlReqResult OBJECT-TYPE SYNTAX SheMeltControlReqResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheMeltTestToneControl 5 } sheMeltTestToneControlReqTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheMeltTestToneControl 6 } sheMeltTestToneControlFreq1 OBJECT-TYPE SYNTAX SheMeltTestToneFrequencyType UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheMeltTestToneControl 7 } sheMeltTestToneControlFreq2 OBJECT-TYPE SYNTAX SheMeltTestToneFrequencyType UNITS "Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheMeltTestToneControl 8 } sheMeltTestToneControlLevel OBJECT-TYPE SYNTAX SheMeltTestSignalLevelType UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "look at table" ::= { sheMeltTestToneControl 9 } -- ----------------------------------------------------------------- -- sheMeltTestRequestObjects -- ----------------------------------------------------------------- -- sheMeltTestResultObjects OBJECT IDENTIFIER ::= { sheMelt 3 } sheMeltTestResultTable OBJECT-TYPE SYNTAX SEQUENCE OF SheMeltTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table contains the testing results of each IfIndex. Only indeces of MELT feature supporting interfaces are listed in this table!" ::= { sheMeltTestResultObjects 1 } sheMeltTestResultEntry OBJECT-TYPE SYNTAX SheMeltTestResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in sheMeltTestResultTable." INDEX { ifIndex } ::= { sheMeltTestResultTable 1 } SheMeltTestResultEntry ::= SEQUENCE { sheMeltTestResultState SheMeltTestResultStateType, sheMeltTestResultTimeStamp Unsigned32, sheMeltTestResultCapacityAB SheMeltTestResultCapacityType, sheMeltTestResultCapacityABValid SheMeltTestResultValidType, sheMeltTestResultCapacityAE SheMeltTestResultCapacityType, sheMeltTestResultCapacityAEValid SheMeltTestResultValidType, sheMeltTestResultCapacityBE SheMeltTestResultCapacityType, sheMeltTestResultCapacityBEValid SheMeltTestResultValidType, sheMeltTestResultResistanceAB SheMeltTestResultResistanceType, sheMeltTestResultResistanceABValid SheMeltTestResultValidType, sheMeltTestResultResistanceBA SheMeltTestResultResistanceType, sheMeltTestResultResistanceBAValid SheMeltTestResultValidType, sheMeltTestResultResistanceAE SheMeltTestResultResistanceType, sheMeltTestResultResistanceAEValid SheMeltTestResultValidType, sheMeltTestResultResistanceBE SheMeltTestResultResistanceType, sheMeltTestResultResistanceBEValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageDcAB SheMeltTestResultDCVoltageType, sheMeltTestResultForeignVoltageDcABValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageDcAE SheMeltTestResultDCVoltageType, sheMeltTestResultForeignVoltageDcAEValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageDcBE SheMeltTestResultDCVoltageType, sheMeltTestResultForeignVoltageDcBEValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageAcAB SheMeltTestResultACVoltageType, sheMeltTestResultForeignVoltageAcABValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageAcAE SheMeltTestResultACVoltageType, sheMeltTestResultForeignVoltageAcAEValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageAcBE SheMeltTestResultACVoltageType, sheMeltTestResultForeignVoltageAcBEValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageAcFrequencyAB SheMeltTestResultACVoltageFrequencyType, sheMeltTestResultForeignVoltageAcFrequencyABValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageAcFrequencyAE SheMeltTestResultACVoltageFrequencyType, sheMeltTestResultForeignVoltageAcFrequencyAEValid SheMeltTestResultValidType, sheMeltTestResultForeignVoltageAcFrequencyBE SheMeltTestResultACVoltageFrequencyType, sheMeltTestResultForeignVoltageAcFrequencyBEValid SheMeltTestResultValidType, sheMeltTestResultForeignCurrentAB SheMeltTestResultForeignCurrentType, sheMeltTestResultForeignCurrentABValid SheMeltTestResultValidType, sheMeltTestResultForeignCurrentAE SheMeltTestResultForeignCurrentType, sheMeltTestResultForeignCurrentAEValid SheMeltTestResultValidType, sheMeltTestResultForeignCurrentBE SheMeltTestResultForeignCurrentType, sheMeltTestResultForeignCurrentBEValid SheMeltTestResultValidType, sheMeltTestResultConductanceAB SheMeltTestResultConductanceType, sheMeltTestResultConductanceABValid SheMeltTestResultValidType, sheMeltTestResultConductanceAE SheMeltTestResultConductanceType, sheMeltTestResultConductanceAEValid SheMeltTestResultValidType, sheMeltTestResultConductanceBE SheMeltTestResultConductanceType, sheMeltTestResultConductanceBEValid SheMeltTestResultValidType, sheMeltTestResultSusceptanceAB SheMeltTestResultConductanceType, sheMeltTestResultSusceptanceABValid SheMeltTestResultValidType, sheMeltTestResultSusceptanceAE SheMeltTestResultConductanceType, sheMeltTestResultSusceptanceAEValid SheMeltTestResultValidType, sheMeltTestResultSusceptanceBE SheMeltTestResultConductanceType, sheMeltTestResultSusceptanceBEValid SheMeltTestResultValidType, sheMeltTestResultCheckPPA SheMeltTestResultCheckPpaType, sheMeltTestResultCheckSplitter SheMeltTestResultCheckType, sheMeltTestResultCheckIAD SheMeltTestResultCheckType } sheMeltTestResultState OBJECT-TYPE SYNTAX SheMeltTestResultStateType MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result status of this interface. " DEFVAL { notTested } ::= { sheMeltTestResultEntry 1 } sheMeltTestResultTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last executed MELT." ::= { sheMeltTestResultEntry 2 } sheMeltTestResultCapacityAB OBJECT-TYPE SYNTAX SheMeltTestResultCapacityType UNITS "nF" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for capacity a-wire - b-wire (ring - tip)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 3 } sheMeltTestResultCapacityABValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for capacitytest a-wire - b-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 4 } sheMeltTestResultCapacityAE OBJECT-TYPE SYNTAX SheMeltTestResultCapacityType UNITS "nF" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for capacity a-wire - E (ring - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 5 } sheMeltTestResultCapacityAEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for capacitytest a-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 6 } sheMeltTestResultCapacityBE OBJECT-TYPE SYNTAX SheMeltTestResultCapacityType UNITS "nF" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for capacity b-wire - E (tip - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 7 } sheMeltTestResultCapacityBEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for capacitytest b-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 8 } sheMeltTestResultResistanceAB OBJECT-TYPE SYNTAX SheMeltTestResultResistanceType UNITS "Ohms" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for resistance a-wire - b-wire (ring - tip). Note: The NMS should be able to show the values also in kOhms or MOhms for better readability." DEFVAL { 0 } ::= { sheMeltTestResultEntry 9 } sheMeltTestResultResistanceABValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for resistancetest a-wire - b-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 10 } sheMeltTestResultResistanceBA OBJECT-TYPE SYNTAX SheMeltTestResultResistanceType UNITS "Ohms" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for resistance b-wire - a-wire (tip - ring). Note: The NMS should be able to show the values also in kOhms or MOhms for better readability." DEFVAL { 0 } ::= { sheMeltTestResultEntry 11 } sheMeltTestResultResistanceBAValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for resistancetest b-wire - a-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 12 } sheMeltTestResultResistanceAE OBJECT-TYPE SYNTAX SheMeltTestResultResistanceType UNITS "Ohms" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for resistance a-wire - E (ring - earth). Note: The NMS should be able to show the values also in kOhms or MOhms for better readability." DEFVAL { 0 } ::= { sheMeltTestResultEntry 13 } sheMeltTestResultResistanceAEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for resistancetest a-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 14 } sheMeltTestResultResistanceBE OBJECT-TYPE SYNTAX SheMeltTestResultResistanceType UNITS "Ohms" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for resistance b-wire - E (tip - earth). Note: The NMS should be able to show the values also in kOhms or MOhms for better readability." DEFVAL { 0 } ::= { sheMeltTestResultEntry 15 } sheMeltTestResultResistanceBEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for resistancetest b-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 16 } sheMeltTestResultForeignVoltageDcAB OBJECT-TYPE SYNTAX SheMeltTestResultDCVoltageType UNITS "100 mV" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage DC a-wire - b-wire (ring - tip)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 17 } sheMeltTestResultForeignVoltageDcABValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignDcVoltagetest a-wire - b-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 18 } sheMeltTestResultForeignVoltageDcAE OBJECT-TYPE SYNTAX SheMeltTestResultDCVoltageType UNITS "100 mV" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage DC a-wire - E (ring - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 19 } sheMeltTestResultForeignVoltageDcAEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignDcVoltagetest a-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 20 } sheMeltTestResultForeignVoltageDcBE OBJECT-TYPE SYNTAX SheMeltTestResultDCVoltageType UNITS "100 mV" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage DC b-wire - E (tip - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 21 } sheMeltTestResultForeignVoltageDcBEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignDcVoltagetest b-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 22 } sheMeltTestResultForeignVoltageAcAB OBJECT-TYPE SYNTAX SheMeltTestResultACVoltageType UNITS "100 mV" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage AC a-wire - b-wire (ring - tip)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 23 } sheMeltTestResultForeignVoltageAcABValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignAcVoltage test a-wire - b-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 24 } sheMeltTestResultForeignVoltageAcAE OBJECT-TYPE SYNTAX SheMeltTestResultACVoltageType UNITS "100 mV" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage AC a-wire - E (ring - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 25 } sheMeltTestResultForeignVoltageAcAEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignAcVoltagetest a-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 26 } sheMeltTestResultForeignVoltageAcBE OBJECT-TYPE SYNTAX SheMeltTestResultACVoltageType UNITS "100 mV" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage AC b-wire - E (tip - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 27 } sheMeltTestResultForeignVoltageAcBEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignAcVoltagetest b-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 28 } sheMeltTestResultForeignVoltageAcFrequencyAB OBJECT-TYPE SYNTAX SheMeltTestResultACVoltageFrequencyType UNITS "Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage AC frequency a-wire - b-wire (ring - tip)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 29 } sheMeltTestResultForeignVoltageAcFrequencyABValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignAcVoltageFrequency test a-wire - b-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 30 } sheMeltTestResultForeignVoltageAcFrequencyAE OBJECT-TYPE SYNTAX SheMeltTestResultACVoltageFrequencyType UNITS "Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage AC frequency a-wire - earth (ring - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 31 } sheMeltTestResultForeignVoltageAcFrequencyAEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignAcVoltageFrequency test a-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 32 } sheMeltTestResultForeignVoltageAcFrequencyBE OBJECT-TYPE SYNTAX SheMeltTestResultACVoltageFrequencyType UNITS "Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign voltage AC frequency b-wire - earth (tip - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 33 } sheMeltTestResultForeignVoltageAcFrequencyBEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignAcVoltageFrequency test b-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 34 } sheMeltTestResultForeignCurrentAB OBJECT-TYPE SYNTAX SheMeltTestResultForeignCurrentType UNITS "A" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign current test a-wire - b-wire (ring - tip)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 35 } sheMeltTestResultForeignCurrentABValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignCurrenttest a-wire - b-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 36 } sheMeltTestResultForeignCurrentAE OBJECT-TYPE SYNTAX SheMeltTestResultForeignCurrentType UNITS "A" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign current test a-wire - E (ring - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 37 } sheMeltTestResultForeignCurrentAEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignCurrenttest a-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 38 } sheMeltTestResultForeignCurrentBE OBJECT-TYPE SYNTAX SheMeltTestResultForeignCurrentType UNITS "A" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for foreign current test b-wire - E (tip - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 39 } sheMeltTestResultForeignCurrentBEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for foreignCurrenttest b-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 40 } sheMeltTestResultConductanceAB OBJECT-TYPE SYNTAX SheMeltTestResultConductanceType UNITS "100 nS" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for conductance test a-wire - b-wire (ring - tip)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 41 } sheMeltTestResultConductanceABValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for conductancetest a-wire - b-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 42 } sheMeltTestResultConductanceAE OBJECT-TYPE SYNTAX SheMeltTestResultConductanceType UNITS "100 nS" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for conductance test a-wire - earth (ring - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 43 } sheMeltTestResultConductanceAEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for conductancetest a-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 44 } sheMeltTestResultConductanceBE OBJECT-TYPE SYNTAX SheMeltTestResultConductanceType UNITS "100 nS" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for conductance test b-wire - earth (tip - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 45 } sheMeltTestResultConductanceBEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for conductancetest b-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 46 } sheMeltTestResultSusceptanceAB OBJECT-TYPE SYNTAX SheMeltTestResultConductanceType UNITS "100 nS" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for susceptance test a-wire - b-wire (ring - tip)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 47 } sheMeltTestResultSusceptanceABValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for susceptancetest a-wire - b-wire, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 48 } sheMeltTestResultSusceptanceAE OBJECT-TYPE SYNTAX SheMeltTestResultConductanceType UNITS "100 nS" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for susceptance test a-wire - earth (ring - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 49 } sheMeltTestResultSusceptanceAEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for susceptancetest a-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 50 } sheMeltTestResultSusceptanceBE OBJECT-TYPE SYNTAX SheMeltTestResultConductanceType UNITS "100 nS" MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for susceptance test b-wire - earth (tip - earth)." DEFVAL { 0 } ::= { sheMeltTestResultEntry 51 } sheMeltTestResultSusceptanceBEValid OBJECT-TYPE SYNTAX SheMeltTestResultValidType MAX-ACCESS read-only STATUS current DESCRIPTION "The valid information for susceptancetest b-wire - earth, if sheMeltTestResultState = testSucceeded. " DEFVAL { invalid } ::= { sheMeltTestResultEntry 52 } sheMeltTestResultCheckPPA OBJECT-TYPE SYNTAX SheMeltTestResultCheckPpaType MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for PPA test. " DEFVAL { notTested } ::= { sheMeltTestResultEntry 53 } sheMeltTestResultCheckSplitter OBJECT-TYPE SYNTAX SheMeltTestResultCheckType MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for Splitter test. " DEFVAL { notTested } ::= { sheMeltTestResultEntry 54 } sheMeltTestResultCheckIAD OBJECT-TYPE SYNTAX SheMeltTestResultCheckType MAX-ACCESS read-only STATUS current DESCRIPTION "The MELT result for IAD test. " DEFVAL { notTested } ::= { sheMeltTestResultEntry 55 } -- End: Add some parameters. -- ----------------------------------------------------------------- -- Single End Loop Test Notifications for ADSL -- ----------------------------------------------------------------- -- sheMeltNotifications OBJECT IDENTIFIER ::= { sheMelt 10 } sheMeltTestRequestParametersModified NOTIFICATION-TYPE OBJECTS { sheMeltTestRequestControlReqTimeStamp, sheMeltTestParameterFreq1 } STATUS current DESCRIPTION "The MELT testparameters are modified." ::= { sheMeltNotifications 1 } sheMeltTestRequestStateModified NOTIFICATION-TYPE OBJECTS { sheMeltTestRequestControlReqTimeStamp, sheMeltTestRequestIfState, sheMeltTestRequestIuState } STATUS current DESCRIPTION "The MELT state of an interface was modified by command or by NE." ::= { sheMeltNotifications 2 } sheMeltTestRequestIfTestToneIndexModified NOTIFICATION-TYPE OBJECTS { sheMeltTestRequestControlReqTimeStamp, sheMeltTestRequestTestToneIndex } STATUS current DESCRIPTION "The used test tone set of an interface (assignment interface - test tone index) was modified." ::= { sheMeltNotifications 3 } sheMeltTestToneEntryCreated NOTIFICATION-TYPE OBJECTS { sheMeltTestToneControlIndex, sheMeltTestToneControlReqTimeStamp, sheMeltTestToneControlFreq1, sheMeltTestToneControlFreq2, sheMeltTestToneControlLevel } STATUS current DESCRIPTION "Configuration trap for new created MELT testTone set." ::= { sheMeltNotifications 4 } sheMeltTestToneEntryModified NOTIFICATION-TYPE OBJECTS { sheMeltTestToneControlIndex, sheMeltTestToneControlReqTimeStamp, sheMeltTestToneControlFreq1, sheMeltTestToneControlFreq2, sheMeltTestToneControlLevel } STATUS current DESCRIPTION "Configuration trap for modified MELT testTone set." ::= { sheMeltNotifications 5 } sheMeltTestToneEntryDeleted NOTIFICATION-TYPE OBJECTS { sheMeltTestToneControlIndex, sheMeltTestToneControlReqTimeStamp } STATUS current DESCRIPTION "Configuration trap for delete a MELT testTone set." ::= { sheMeltNotifications 6 } sheMeltConformance OBJECT IDENTIFIER ::= { sheMelt 100 } sheMeltCompliances OBJECT IDENTIFIER ::= { sheMeltConformance 1 } sheMeltMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheMeltGroup, sheMeltControlGroup, sheMeltNotificationGroup } ::= { sheMeltCompliances 1 } sheMeltGroups OBJECT IDENTIFIER ::= { sheMeltConformance 2 } sheMeltGroup OBJECT-GROUP OBJECTS { sheMeltTestParameterFreq1, sheMeltTestRequestIfState, sheMeltTestRequestIuState, sheMeltTestRequestTestToneIndex, sheMeltTestToneIndex, sheMeltTestToneFreq1, sheMeltTestToneFreq2, sheMeltTestToneLevel, sheMeltTestResultState, sheMeltTestResultTimeStamp, sheMeltTestResultCapacityAB, sheMeltTestResultCapacityABValid, sheMeltTestResultCapacityAE, sheMeltTestResultCapacityAEValid, sheMeltTestResultCapacityBE, sheMeltTestResultCapacityBEValid, sheMeltTestResultResistanceAB, sheMeltTestResultResistanceABValid, sheMeltTestResultResistanceBA, sheMeltTestResultResistanceBAValid, sheMeltTestResultResistanceAE, sheMeltTestResultResistanceAEValid, sheMeltTestResultResistanceBE, sheMeltTestResultResistanceBEValid, sheMeltTestResultForeignVoltageDcAB, sheMeltTestResultForeignVoltageDcABValid, sheMeltTestResultForeignVoltageDcAE, sheMeltTestResultForeignVoltageDcAEValid, sheMeltTestResultForeignVoltageDcBE, sheMeltTestResultForeignVoltageDcBEValid, sheMeltTestResultForeignVoltageAcAB, sheMeltTestResultForeignVoltageAcABValid, sheMeltTestResultForeignVoltageAcAE, sheMeltTestResultForeignVoltageAcAEValid, sheMeltTestResultForeignVoltageAcBE, sheMeltTestResultForeignVoltageAcBEValid, sheMeltTestResultForeignCurrentAB, sheMeltTestResultForeignCurrentABValid, sheMeltTestResultForeignCurrentAE, sheMeltTestResultForeignCurrentAEValid, sheMeltTestResultForeignCurrentBE, sheMeltTestResultForeignCurrentBEValid, sheMeltTestResultConductanceAB, sheMeltTestResultConductanceABValid, sheMeltTestResultConductanceAE, sheMeltTestResultConductanceAEValid, sheMeltTestResultConductanceBE, sheMeltTestResultConductanceBEValid, sheMeltTestResultSusceptanceAB, sheMeltTestResultSusceptanceABValid, sheMeltTestResultSusceptanceAE, sheMeltTestResultSusceptanceAEValid, sheMeltTestResultSusceptanceBE, sheMeltTestResultSusceptanceBEValid, sheMeltTestResultCheckPPA, sheMeltTestResultCheckSplitter, sheMeltTestResultCheckIAD, sheMeltTestResultForeignVoltageAcFrequencyAB, sheMeltTestResultForeignVoltageAcFrequencyABValid, sheMeltTestResultForeignVoltageAcFrequencyAE, sheMeltTestResultForeignVoltageAcFrequencyAEValid, sheMeltTestResultForeignVoltageAcFrequencyBE, sheMeltTestResultForeignVoltageAcFrequencyBEValid } STATUS current DESCRIPTION " " ::= { sheMeltGroups 1 } sheMeltControlGroup OBJECT-GROUP OBJECTS { sheMeltTestRequestControlReq, sheMeltTestRequestControlIndex, sheMeltTestRequestControlStatus, sheMeltTestRequestControlTimer, sheMeltTestRequestControlReqResult, sheMeltTestRequestControlReqTimeStamp, sheMeltTestRequestControlTestToneIndex, sheMeltTestRequestControlParameterFreq1, sheMeltTestToneControlReq, sheMeltTestToneControlIndex, sheMeltTestToneControlStatus, sheMeltTestToneControlTimer, sheMeltTestToneControlReqResult, sheMeltTestToneControlReqTimeStamp, sheMeltTestToneControlFreq1, sheMeltTestToneControlFreq2, sheMeltTestToneControlLevel } STATUS current DESCRIPTION "Description." ::= { sheMeltGroups 2 } sheMeltNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheMeltTestRequestParametersModified, sheMeltTestRequestStateModified, sheMeltTestRequestIfTestToneIndexModified, sheMeltTestToneEntryCreated, sheMeltTestToneEntryModified, sheMeltTestToneEntryDeleted } STATUS current DESCRIPTION " " ::= { sheMeltGroups 3 } END -- -- she-melt-mib.mib --