-- -- she-l2cp-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 5.0 Build 250 -- Wednesday, June 06, 2007 at 08:58:42 -- SHE-L2CP-MIB DEFINITIONS ::= BEGIN IMPORTS she FROM AN-SHE-MIB ifIndex FROM IF-MIB sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity, SheAlarmSevProfileIndex FROM SHE-ALARMING-MIB SheControlStatusType FROM SHE-TC-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI; sheL2cpMib MODULE-IDENTITY LAST-UPDATED "200706060955Z" -- June 06, 2007 at 09:55 GMT ORGANIZATION "Nokia Siemens Networks" CONTACT-INFO "Gerd Barchmann COO BBA DSLAM RD SDE gerd.barchmann@nsn.com +49 3834 555654" DESCRIPTION "She L2CP interface description." REVISION "200510111331Z" -- October 11, 2005 at 13:31 GMT DESCRIPTION "First release." REVISION "200511031526Z" -- November 03, 2005 at 15:26 GMT DESCRIPTION "Correct notification's object list's." REVISION "200512011555Z" -- December 01, 2005 at 15:55 GMT DESCRIPTION "Correct Range for Timer1 and set default value for Timers and PartitionId." REVISION "200512091105Z" -- December 09, 2005 at 11:05 GMT DESCRIPTION "Change access for table index to readonly." REVISION "200602271037Z" -- February 27, 2006 at 10:37 GMT DESCRIPTION "Add configuration of AlarmSeverity to L2cpIf-Table." REVISION "200604051012Z" -- April 05, 2006 at 10:12 GMT DESCRIPTION "Add new table and control group for configuration of the local l2cp host interface." REVISION "200605101606Z" -- May 10, 2006 at 16:06 GMT DESCRIPTION "Correct access for sheL2coHostIfVlanId. Delete Gateway entry from HostIf-Table." REVISION "200608101600Z" -- August 10, 2006 at 16:00 GMT DESCRIPTION "Merge from VSHE!!" REVISION "200704251033Z" -- April 25, 2007 at 10:33 GMT DESCRIPTION "HostIf configuration is now handled in sheSystemMib for the complete NE. The HostIfTable and Control-group is not longer supported with SHE R2.5.2." REVISION "200706061022Z" -- June 06, 2007 at 10:22 GMT DESCRIPTION "Set status for not longer supported elements obsolete (R2.6)." ::= { she 16 } -- -- Type definitions -- SheL2cpOperStateType ::= INTEGER { up(1), down(2) } -- The states of the adjacency protocol. SheL2cpAdjacencyStateType ::= INTEGER { l2cpStateRESET(1), l2cpStateSYNSENT(2), l2cpStateSYNRCVD(3), l2cpStateESTAB(4) } -- The ID of the partition managed by an L2CP protocol instance (see RFC 3292). -- Or the partition to which a port is assigned. -- 0...255: These are really partition IDs. -- 256: no partition (e.g. in case when DSLAM does not support partitions) -- 257: invalid partition (e.g. a port does not belong to any partition) SheL2cpPartitionIdType ::= INTEGER (0..255 | 256 | 257) SheL2cpControlRequestType ::= INTEGER { createL2cpIf(1), deleteL2cpIf(2), modifyL2cpIf(3), createL2cpHostIf(6), modifyL2cpHostIf(7), deleteL2cpHostIf(8), assignPortToPartition(10) } SheL2cpControlRequestResultType ::= INTEGER { commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37), wrongL2cpIfIndex(40), tooManyL2cpInterfaces(41), wrongL2cpPortPartitionIndex(50), wrongL2cpHostIfIndex(60), tooManyL2cpHostInterfaces(61) } -- -- Node definitions -- sheL2cpObjects OBJECT IDENTIFIER ::= { sheL2cpMib 1 } sheL2cpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SheL2cpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2CP interface table." ::= { sheL2cpObjects 2 } sheL2cpIfEntry OBJECT-TYPE SYNTAX SheL2cpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the L2CP interface table (sheL2cpIfTable)" INDEX { sheL2cpIfIndex } ::= { sheL2cpIfTable 1 } SheL2cpIfEntry ::= SEQUENCE { sheL2cpIfIndex INTEGER, sheL2cpOperState SheL2cpOperStateType, sheL2cpAdjacencyState SheL2cpAdjacencyStateType, sheL2cpTimer1 INTEGER, sheL2cpTimer2 INTEGER, sheL2cpTimer3 INTEGER, sheL2cpControllerIpAddress OCTET STRING, sheL2cpAccessNodeIdentifier OCTET STRING, sheL2cpPartitionId SheL2cpPartitionIdType, sheL2cpAlarmSeverityIndex SheAlarmSevProfileIndex } sheL2cpIfIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of an L2CP protocol instance in the sheL2cpIfTable." ::= { sheL2cpIfEntry 1 } sheL2cpOperState OBJECT-TYPE SYNTAX SheL2cpOperStateType MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of the L2CP interface." DEFVAL { 2 } ::= { sheL2cpIfEntry 2 } sheL2cpAdjacencyState OBJECT-TYPE SYNTAX SheL2cpAdjacencyStateType MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the adjacency protocol." DEFVAL { 1 } ::= { sheL2cpIfEntry 3 } sheL2cpTimer1 OBJECT-TYPE SYNTAX INTEGER (1..255) UNITS "100ms" MAX-ACCESS read-only STATUS current DESCRIPTION "This timer defines the TIMER field is used to inform the receiver of the timer value used in the adjacency protocol of the sender. The timer specifies the nominal time between periodic adjacency protocol messages. It is a constant for the duration of a session." DEFVAL { 100 } ::= { sheL2cpIfEntry 4 } sheL2cpTimer2 OBJECT-TYPE SYNTAX INTEGER (0..10) UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "This value defines the minimum time between two port state messages of the same port. It is used to limit the port messages in case of toggeling ports. The timer base is 1s. 0 means: all port state changes are reported." DEFVAL { 0 } ::= { sheL2cpIfEntry 5 } sheL2cpTimer3 OBJECT-TYPE SYNTAX INTEGER (0..60) UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "This timeout is used to handle L2CP message flooding after Controller recovery. The timer is started when the link to the controller was established, The first port state message is sent when this timer expires." DEFVAL { 0 } ::= { sheL2cpIfEntry 6 } -- -- sheL2cpControllerIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the remote L2cp controller which should be contacted by this interface." ::= { sheL2cpIfEntry 7 } sheL2cpAccessNodeIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the access node. The DSLAM identifies itself with the controller by means of this name." ::= { sheL2cpIfEntry 8 } sheL2cpPartitionId OBJECT-TYPE SYNTAX SheL2cpPartitionIdType MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the partition managed via this L2CP protocol instance. (see RFC 3292). The value 257 is not used here." DEFVAL { 256 } ::= { sheL2cpIfEntry 10 } sheL2cpAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The currently used alarm severity profile index for this l2cp interface." DEFVAL { 1 } ::= { sheL2cpIfEntry 11 } sheL2cpPortPartitionTable OBJECT-TYPE SYNTAX SEQUENCE OF SheL2cpPortPartitionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2CP port table. The index in this table is the ifIndex. But only such interfaces are listed in this table which are of type xDSL." ::= { sheL2cpObjects 3 } sheL2cpPortPartitionEntry OBJECT-TYPE SYNTAX SheL2cpPortPartitionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the L2CP port partition table (sheL2cpPortPartitionTable)." INDEX { ifIndex } ::= { sheL2cpPortPartitionTable 1 } SheL2cpPortPartitionEntry ::= SEQUENCE { sheL2cpPortPartitionId SheL2cpPartitionIdType } sheL2cpPortPartitionId OBJECT-TYPE SYNTAX SheL2cpPartitionIdType MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of the partition managed the port is assigned to. 0...255: These are really partition IDs. The port is managed by such L2CP interface instances which have the same partition ID. 256: no partition. The port belongs to no partition. It is managed by such L2CP interface instances wich are assigned to 'no partition'. 257: invalid partition The port is not managed by any L2CP instance." DEFVAL { 256 } ::= { sheL2cpPortPartitionEntry 2 } sheL2cpControl OBJECT IDENTIFIER ::= { sheL2cpObjects 4 } sheL2cpControlRequest OBJECT-TYPE SYNTAX SheL2cpControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "The L2CP commands: createL2cpIf: Create a new L2CP interface instance: Parameter: sheL2cpControlTimer1, sheL2cpControlTimer2, sheL2cpControlTimer3, sheL2cpControlControllerIpAddress, sheL2cpControlPartitionId, sheL2cpControlAccessNodeIdentifier sheL2cpControlAlarmSeverityIndex deleteL2cpIf: Delete a L2CP interface instance. Parameter: sheL2cpControlIndex modifyL2cpIf: Change the parameter of an L2CP interface instance. Parameter: sheL2cpControlL2cpIndex, sheL2cpControlTimer1, sheL2cpControlTimer2, sheL2cpControlTimer3, sheL2cpControlControllerIpAddress, sheL2cpControlPartitionId, sheL2cpControlAccessNodeIdentifier sheL2cpControlAlarmSeverityIndex assignPortToPartition: A port is assigned to a partition. Parameter: sheL2cpControlIndex, sheL2cpControlPartitionId " ::= { sheL2cpControl 1 } sheL2cpControlIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The index of a port in the port partition table (vshL2cpPortPartitionTable) if the PartionId should be set or the index of a valid L2cpIf in the sheL2cpIfTable for modify or delete of these interface. " ::= { sheL2cpControl 2 } sheL2cpControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of a user command." ::= { sheL2cpControl 3 } sheL2cpControlReqResult OBJECT-TYPE SYNTAX SheL2cpControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last ControlRequest" ::= { sheL2cpControl 4 } sheL2cpControlTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheL2cpControl 5 } sheL2cpControlTimeStamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheL2cpControl 6 } sheL2cpControlTimer1 OBJECT-TYPE SYNTAX INTEGER (1..255) UNITS "100ms" MAX-ACCESS read-write STATUS current DESCRIPTION "This timer defines the timer value used by the adjacency protocol. It defines the time between perdiodic adjacency protocol messages. The time base are 100ms. (see RFC 3292)" ::= { sheL2cpControl 7 } sheL2cpControlTimer2 OBJECT-TYPE SYNTAX INTEGER (0..10) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "This value defines the minimum time between two port state messages of the same port. It is used to limit the port messages in case of toggeling ports. The timer base is 1s. 0 means: all port state changes are reported." ::= { sheL2cpControl 8 } sheL2cpControlTimer3 OBJECT-TYPE SYNTAX INTEGER (0..60) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "This value defines the time before all port states are reported to controller after an L2CP connection was established. This timer can be used to avoid a message flooding of the controller. The timer base is 1s." ::= { sheL2cpControl 9 } sheL2cpControlControllerIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the controller." ::= { sheL2cpControl 10 } sheL2cpControlAccessNodeIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the access node. The DSLAM identifies itself with the controller by means of this name." ::= { sheL2cpControl 11 } sheL2cpControlPartitionId OBJECT-TYPE SYNTAX SheL2cpPartitionIdType MAX-ACCESS read-write STATUS current DESCRIPTION "The ID of the partition managed by an L2CP protocol instance (see RFC 3292). The partition to which a port is assigned. " ::= { sheL2cpControl 12 } sheL2cpControlAlarmSeverityIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-write STATUS current DESCRIPTION "look at table." ::= { sheL2cpControl 13 } sheL2cpNotification OBJECT IDENTIFIER ::= { sheL2cpObjects 5 } sheL2cpAlarmEvents OBJECT IDENTIFIER ::= { sheL2cpNotification 1 } sheL2cpLinkDown NOTIFICATION-TYPE OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Description." ::= { sheL2cpAlarmEvents 1 } sheL2cpConfigEvents OBJECT IDENTIFIER ::= { sheL2cpNotification 2 } sheL2cpIfCreated NOTIFICATION-TYPE OBJECTS { sheL2cpControlTimeStamp, sheL2cpOperState, sheL2cpTimer1, sheL2cpTimer2, sheL2cpTimer3, sheL2cpControllerIpAddress, sheL2cpAccessNodeIdentifier, sheL2cpAdjacencyState, sheL2cpPartitionId, sheL2cpAlarmSeverityIndex } STATUS current DESCRIPTION "Configuration trap." ::= { sheL2cpConfigEvents 1 } sheL2cpIfDeleted NOTIFICATION-TYPE OBJECTS { sheL2cpControlTimeStamp, sheL2cpControlIndex } STATUS current DESCRIPTION "Configuration trap." ::= { sheL2cpConfigEvents 2 } sheL2cpIfModified NOTIFICATION-TYPE OBJECTS { sheL2cpControlTimeStamp, sheL2cpOperState, sheL2cpTimer1, sheL2cpTimer2, sheL2cpTimer3, sheL2cpControllerIpAddress, sheL2cpAccessNodeIdentifier, sheL2cpAdjacencyState, sheL2cpPartitionId, sheL2cpAlarmSeverityIndex } STATUS current DESCRIPTION "Configuration trap." ::= { sheL2cpConfigEvents 3 } sheL2cpPartitionPortDataChanged NOTIFICATION-TYPE OBJECTS { sheL2cpControlTimeStamp, sheL2cpPortPartitionId } STATUS current DESCRIPTION "Configuration trap." ::= { sheL2cpConfigEvents 4 } sheL2cpHostIfCreated NOTIFICATION-TYPE OBJECTS { sheL2cpHostIfControlIndex, sheL2cpHostIfControlStatus, sheL2cpHostIfControlReqResult, sheL2cpHostIfControlTimeStamp, sheL2cpHostIfControlVlanId, sheL2cpHostIfControlIpAddress, sheL2cpHostIfControlNetmask } STATUS obsolete DESCRIPTION "Note: This parameter is not longer valid starting with release SHE R2.6 The IP interface configuration was moved to sheSystemIpHostTable." ::= { sheL2cpConfigEvents 5 } sheL2cpHostIfModified NOTIFICATION-TYPE OBJECTS { sheL2cpHostIfControlIndex, sheL2cpHostIfControlStatus, sheL2cpHostIfControlReqResult, sheL2cpHostIfControlTimeStamp, sheL2cpHostIfControlVlanId, sheL2cpHostIfControlIpAddress, sheL2cpHostIfControlNetmask } STATUS obsolete DESCRIPTION "Note: This parameter is not longer valid starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable." ::= { sheL2cpConfigEvents 6 } sheL2cpHostIfDeleted NOTIFICATION-TYPE OBJECTS { sheL2cpHostIfControlIndex, sheL2cpHostIfControlStatus, sheL2cpHostIfControlReqResult, sheL2cpHostIfControlTimeStamp } STATUS obsolete DESCRIPTION "Note: This parameter is not longer valid starting with release SHE R2.6 The IP interface configuration was moved to sheSystemIpHostTable." ::= { sheL2cpConfigEvents 7 } sheL2cpHostIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SheL2cpHostIfEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Note: This parameter is not longer valid starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable." ::= { sheL2cpObjects 6 } sheL2cpHostIfEntry OBJECT-TYPE SYNTAX SheL2cpHostIfEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The index of an L2CP host interface instance in this table. Note: This parameter is not longer valid starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable." INDEX { sheL2cpHostIfIndex } ::= { sheL2cpHostIfTable 1 } SheL2cpHostIfEntry ::= SEQUENCE { sheL2cpHostIfIndex INTEGER, sheL2cpHostIfVlanId Unsigned32, sheL2cpHostIfIpAddress OCTET STRING, sheL2cpHostIfNetmask OCTET STRING } sheL2cpHostIfIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Unique key for that table." ::= { sheL2cpHostIfEntry 1 } sheL2cpHostIfVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The host vlan for the local L2cp interface which should be used as tag to contact the remote L2cp controller." ::= { sheL2cpHostIfEntry 2 } sheL2cpHostIfIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The IP address of the local L2cp interface which should be used by the NE." ::= { sheL2cpHostIfEntry 3 } sheL2cpHostIfNetmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The l2cp host interface Netmask." ::= { sheL2cpHostIfEntry 5 } -- Note: This parameter is not longer valid starting with release SHE R2.6. -- The IP interface configuration was moved to sheSystemIpHostTable. sheL2cpHostIfControl OBJECT IDENTIFIER ::= { sheL2cpObjects 7 } sheL2cpHostIfControlRequest OBJECT-TYPE SYNTAX SheL2cpControlRequestType MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The L2CP commands: Note: This parameter is not longer valid starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable. createL2cpHostIf: Create a new L2CP host interface instance: Parameter: sheL2cpHostIfControlVlanId sheL2cpHostIfControlIpAddress sheL2cpHostIfControlNetmask deleteL2cpHostIf: Delete a L2CP host interface instance. Parameter: sheL2cpHostIfControlIndex modifyL2cpHostIf: Change the parameter of an L2CP host interface instance. Parameter: sheL2cpHostIfControlIndex sheL2cpHostIfControlIpAddress sheL2cpHostIfControlNetmask " ::= { sheL2cpHostIfControl 1 } sheL2cpHostIfControlIndex OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The index of a valid L2cpHostIf from sheL2cpHostIfTable for modifies or delete. " ::= { sheL2cpHostIfControl 2 } sheL2cpHostIfControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The status of a user command." ::= { sheL2cpHostIfControl 3 } sheL2cpHostIfControlReqResult OBJECT-TYPE SYNTAX SheL2cpControlRequestResultType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The result of the last ControlRequest" ::= { sheL2cpHostIfControl 4 } sheL2cpHostIfControlTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The maximum wait time for the manager for a long running user command." ::= { sheL2cpHostIfControl 5 } sheL2cpHostIfControlTimeStamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The time stamp of the last command (end of command)." ::= { sheL2cpHostIfControl 6 } sheL2cpHostIfControlVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4093) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The host vlan for the local L2cp interface which should be used as tag to contact the remote L2cp controller. This value could only be used for create command. A modification is not allowed!" ::= { sheL2cpHostIfControl 7 } sheL2cpHostIfControlIpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The IP address of the local L2cp host interface." ::= { sheL2cpHostIfControl 8 } sheL2cpHostIfControlNetmask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The l2cp host interface Netmask." ::= { sheL2cpHostIfControl 10 } -- conformance information -- sheL2cpConformance OBJECT IDENTIFIER ::= { sheL2cpObjects 8 } sheL2cpGroups OBJECT IDENTIFIER ::= { sheL2cpConformance 1 } -- units of conformance -- sheL2cpGroup OBJECT-GROUP OBJECTS { sheL2cpIfIndex, sheL2cpOperState, sheL2cpTimer1, sheL2cpTimer2, sheL2cpTimer3, sheL2cpControllerIpAddress, sheL2cpAccessNodeIdentifier, sheL2cpAlarmSeverityIndex, sheL2cpPortPartitionId, sheL2cpAdjacencyState, sheL2cpPartitionId } STATUS current DESCRIPTION "A collection of objects providing information about a VDSL Line." ::= { sheL2cpGroups 1 } sheL2cpControlGroup OBJECT-GROUP OBJECTS { sheL2cpControlRequest, sheL2cpControlStatus, sheL2cpControlIndex, sheL2cpControlReqResult, sheL2cpControlTimer, sheL2cpControlTimeStamp, sheL2cpControlControllerIpAddress, sheL2cpControlTimer1, sheL2cpControlTimer2, sheL2cpControlTimer3, sheL2cpControlAlarmSeverityIndex, sheL2cpControlPartitionId, sheL2cpControlAccessNodeIdentifier } STATUS current DESCRIPTION "Description." ::= { sheL2cpGroups 2 } sheL2cpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheL2cpLinkDown, sheL2cpIfModified, sheL2cpPartitionPortDataChanged, sheL2cpIfCreated, sheL2cpIfDeleted } STATUS current DESCRIPTION "This group supports notifications of significant conditions associated with VDSL Lines." ::= { sheL2cpGroups 3 } sheL2cpObsoleteGroup OBJECT-GROUP OBJECTS { sheL2cpHostIfIndex, sheL2cpHostIfVlanId, sheL2cpHostIfIpAddress, sheL2cpHostIfNetmask, sheL2cpHostIfControlRequest, sheL2cpHostIfControlIndex, sheL2cpHostIfControlStatus, sheL2cpHostIfControlReqResult, sheL2cpHostIfControlTimer, sheL2cpHostIfControlTimeStamp, sheL2cpHostIfControlVlanId, sheL2cpHostIfControlIpAddress, sheL2cpHostIfControlNetmask } STATUS obsolete DESCRIPTION "Description." ::= { sheL2cpGroups 4 } sheL2cpObsoleteNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheL2cpHostIfCreated, sheL2cpHostIfModified, sheL2cpHostIfDeleted } STATUS obsolete DESCRIPTION "Description." ::= { sheL2cpGroups 5 } sheL2cpCompliances OBJECT IDENTIFIER ::= { sheL2cpConformance 2 } -- this module -- this module -- this module sheL2cpMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which manage VDSL interfaces in SHE." MODULE -- this module MANDATORY-GROUPS { sheL2cpGroup, sheL2cpControlGroup, sheL2cpNotificationGroup } ::= { sheL2cpCompliances 1 } END -- -- she-l2cp-mib.mib --