-- -- she-alarming-mib.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 5.0 Build 250 -- Monday, June 11, 2007 at 15:21:58 -- SHE-ALARMING-MIB DEFINITIONS ::= BEGIN IMPORTS she FROM AN-SHE-MIB SheControlStatusType FROM SHE-TC-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF TimeTicks, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; sheAlarming MODULE-IDENTITY LAST-UPDATED "200706111000Z" -- June 11, 2007 at 10:00 GMT ORGANIZATION "Nokia Siemens Networks" CONTACT-INFO "Gerd Barchmann COO BBA DSLAM RD SDE gerd.barchmann@nsn.com +49 3834 555654" DESCRIPTION "The MIB module representing multiple logical entities for the SHE alarm management. " REVISION "200410061109Z" -- October 06, 2004 at 11:09 GMT DESCRIPTION "First Release" REVISION "200411231109Z" -- November 23, 2004 at 11:09 GMT DESCRIPTION "Correct controlgroup sheAlarmControl. ProfileIndex, AlarmID and Serverity are read/write." REVISION "200501071110Z" -- January 07, 2005 at 11:10 GMT DESCRIPTION "Strip ControlRequestType and ControlRequestResultType. Each of this types should only contain Request's or Result's." REVISION "200504211110Z" -- April 21, 2005 at 11:10 GMT DESCRIPTION "Change syntax for ...ControlTimeStamp." REVISION "200608101111Z" -- August 10, 2006 at 11:11 GMT DESCRIPTION "Add new enum value to ReportingSourceType for l2cp." REVISION "200703281111Z" -- March 28, 2007 at 11:11 GMT DESCRIPTION "Add configuration of alarm history table. Add alarm history table." REVISION "200704161030Z" -- April 16, 2007 at 10:30 GMT DESCRIPTION "Add new value to sheReportingSourceType for SyncSource(11)." REVISION "200706111337Z" -- June 11, 2007 at 13:37 GMT DESCRIPTION "Add timestamp for last overwritten Alarm to sheAlarmHistoryBase (with R2.6 RP2)." ::= { she 3 } -- -- Textual conventions -- SheReportingSourceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " The type to identify the type of failed component reporting the alarm. " SYNTAX INTEGER { physicalEntity(1), interface(2), vccTp(3), vlan(4), bridgePort(5), erpDomain(6), voip(7), vccTpShdsl(8), vccTpVdsl(9), l2cp(10), syncSource(11), unknown(20) } SheAlarmSeverityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " The type for alarm severities. " SYNTAX INTEGER { critical(1), major(2), minor(3), warning(4), cleared(5) } SheAlarmSevProfileIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " The type for the alarm severity profile index. Currently 10 profiles are supported. " SYNTAX INTEGER (1..10) SheAlarmControlRequestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type for alarm control commands." SYNTAX INTEGER { modifyAlarmSeverity(1), updateAlarmList(2), setAlarmHistoryEnabled(5), setAlarmHistoryBase(6), clearAlarmHistory(7) } SheAlarmControlRequestResultType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The result type for alarm control commands." SYNTAX INTEGER { commExecStarted(30), paramFaulty(31), requestBusy(32), setDataFailed(34), aswTimeout(35), commandFailed(36), commandSucceeded(37) } -- -- Node definitions -- sheAlarmNotificationObjects OBJECT IDENTIFIER ::= { sheAlarming 1 } sheAlarmTimeAndDate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the time stamp when the alarm notification was sent. " ::= { sheAlarmNotificationObjects 1 } sheAlarmReportingSource OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the failed component which reports the alarm. It is the entPhysicalIndex in case of a card is reporting. " ::= { sheAlarmNotificationObjects 2 } sheAlarmReportingSourceType OBJECT-TYPE SYNTAX SheReportingSourceType MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the type of failed component. It allows to interprete the sheAlarmReportingSource, e.g. in case of type is - physicalEntity then the sheAlarmReportingSource is entPhysicalIndex, - interface the sheAlarmReportingSource is a ifIndex, - vccTp the sheAlarmReportingSource is a VccTp index. " ::= { sheAlarmNotificationObjects 3 } sheAlarmSeverity OBJECT-TYPE SYNTAX SheAlarmSeverityType MAX-ACCESS read-only STATUS current DESCRIPTION " The alarm severity. cleared indicates the clearing of alarm. Other values indicate that the alarm is present. " ::= { sheAlarmNotificationObjects 4 } sheAlarmConfigurationObjects OBJECT IDENTIFIER ::= { sheAlarming 2 } sheAlarmSeverityProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAlarmSeverityProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table of alarm severity profiles. SHE supports 10 profiles. Profiles cannot be created or deleted dynamically. Profile 1 is the default profile. Each entry associates a profile index and AlarmID pairs with severities to be used within alarm traps. Alarm severities can be modified by command. " ::= { sheAlarmConfigurationObjects 1 } sheAlarmSeverityProfileEntry OBJECT-TYPE SYNTAX SheAlarmSeverityProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of the alarm severity profile table. " INDEX { sheAlarmSevProfileIndex, sheAlarmSevProfileAlarmID } ::= { sheAlarmSeverityProfileTable 1 } SheAlarmSeverityProfileEntry ::= SEQUENCE { sheAlarmSevProfileIndex SheAlarmSevProfileIndex, sheAlarmSevProfileAlarmID OBJECT IDENTIFIER, sheAlarmSevProfileSeverity SheAlarmSeverityType } sheAlarmSevProfileIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-only STATUS current DESCRIPTION " A number identifying this alarm severity profile. " ::= { sheAlarmSeverityProfileEntry 1 } sheAlarmSevProfileAlarmID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION " The OID of alarm. " ::= { sheAlarmSeverityProfileEntry 2 } sheAlarmSevProfileSeverity OBJECT-TYPE SYNTAX SheAlarmSeverityType MAX-ACCESS read-only STATUS current DESCRIPTION " The severity of alarm. " ::= { sheAlarmSeverityProfileEntry 3 } sheAlarmControl OBJECT IDENTIFIER ::= { sheAlarmConfigurationObjects 4 } sheAlarmControlRequest OBJECT-TYPE SYNTAX SheAlarmControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION " This attribute identifies the control commands. modifyAlarmSeverity: modifies the severity of an alarm in specific profile. Profile 1 is the default profile and its severities cannot be modified. updateAlarmList: the NE updates entries of alarms in the sheAlarmTable after having changed alarm severities of alarms (due to change profile pointers in managed entities or after modification of alarm severities in profiles). This command should be applied once after having finished modifications of severties. Notifications : none " ::= { sheAlarmControl 1 } sheAlarmControlStatus OBJECT-TYPE SYNTAX SheControlStatusType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheAlarmControl 2 } sheAlarmControlSevProfileIndex OBJECT-TYPE SYNTAX SheAlarmSevProfileIndex MAX-ACCESS read-write STATUS current DESCRIPTION " A number identifying this alarm severity profile. " ::= { sheAlarmControl 3 } sheAlarmControlAlarmID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION " The OID of alarm. " ::= { sheAlarmControl 4 } sheAlarmControlSeverity OBJECT-TYPE SYNTAX SheAlarmSeverityType MAX-ACCESS read-write STATUS current DESCRIPTION " The severity of alarm. " ::= { sheAlarmControl 5 } sheAlarmControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. " ::= { sheAlarmControl 6 } sheAlarmControlReqResult OBJECT-TYPE SYNTAX SheAlarmControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The result of the last user command. " ::= { sheAlarmControl 7 } sheAlarmControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION " The time stamp of the last command (end of command). " ::= { sheAlarmControl 8 } sheAlarmListTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAlarmListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The alarm list table is used to store all reported alarms. " ::= { sheAlarmConfigurationObjects 5 } sheAlarmListEntry OBJECT-TYPE SYNTAX SheAlarmListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entry of the alarm lis table. " INDEX { sheAlarmListIndex } ::= { sheAlarmListTable 1 } SheAlarmListEntry ::= SEQUENCE { sheAlarmListIndex Unsigned32, sheAlarmListTimeAndDate TimeTicks, sheAlarmListAlarmID OBJECT IDENTIFIER, sheAlarmListReportingSource Unsigned32, sheAlarmListReportingSourceType SheReportingSourceType, sheAlarmListSeverity SheAlarmSeverityType } sheAlarmListIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " The index of table. " ::= { sheAlarmListEntry 1 } sheAlarmListTimeAndDate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " The time and date when the alarm notification was sent. " ::= { sheAlarmListEntry 2 } sheAlarmListAlarmID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION " The OID of alarm. " ::= { sheAlarmListEntry 3 } sheAlarmListReportingSource OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The failed component which reports the alarm, e.g. the entPhysicalIndex in case of a card is reporting the alarm. " ::= { sheAlarmListEntry 4 } sheAlarmListReportingSourceType OBJECT-TYPE SYNTAX SheReportingSourceType MAX-ACCESS read-only STATUS current DESCRIPTION " The type of failed component. " ::= { sheAlarmListEntry 5 } sheAlarmListSeverity OBJECT-TYPE SYNTAX SheAlarmSeverityType MAX-ACCESS read-only STATUS current DESCRIPTION " The alarm severity of alarm. " ::= { sheAlarmListEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6 -- New supported with SHE R2.6 RP2. sheAlarmHistory OBJECT IDENTIFIER ::= { sheAlarmConfigurationObjects 6 } -- -------------------------------------------------------------- -- Alarm history base group -- -------------------------------------------------------------- -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.1 sheAlarmHistoryBase OBJECT IDENTIFIER ::= { sheAlarmHistory 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.1.1 sheAlarmHistoryEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/ disable alarm history in NE. Default: false" ::= { sheAlarmHistoryBase 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.1.2 sheAlarmHistoryEntryNumber OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of the alarm history entries to keep. Default: 100" ::= { sheAlarmHistoryBase 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.1.3 sheAlarmHistorySeverityLevel OBJECT-TYPE SYNTAX SheAlarmSeverityType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute defines the minimum level of alarms which should be stored in alarm history. All alarms of higher priority will also be stored in that case. If set to critical(1) only critical alarms will be stored. If set to warning(4) all alarms will be stored. The level cleared(5) is not a valid configuration! Default: critical(1)" ::= { sheAlarmHistoryBase 3 } sheAlarmHistoryLatestOverwriteTimeAndDate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If the sheAlarmHistoryTable wrap around, because the configured maximum level was reached, the latest timestamp of the overwritten entrys are stored here for management system recovery. 1.If the overwritten alarm was cleared, the clearing time will be compared with the currently stored value. 2.If the overwritten alarm was not cleared, the arising time will be compared with the currently stored value. 3.The latest timestamp will be stored or maybe the currently stored value will be keeped. " ::= { sheAlarmHistoryBase 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2 sheAlarmHistoryControl OBJECT IDENTIFIER ::= { sheAlarmHistory 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2.1 sheAlarmHistoryControlRequest OBJECT-TYPE SYNTAX SheAlarmControlRequestType MAX-ACCESS read-write STATUS current DESCRIPTION "Alarm history global user commands. setAlarmHistoryEnabled(5): sheAlarmHistoryControlEnabled setAlarmHistoryBase(6): sheAlarmHistoryControlEntryNumber sheAlarmHistoryControlSeverityLevel clearAlarmHistory(7): " ::= { sheAlarmHistoryControl 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2.2 sheAlarmHistoryControlStatus OBJECT-TYPE SYNTAX SheAlarmControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION " The status of a control request. " ::= { sheAlarmHistoryControl 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2.3 sheAlarmHistoryControlTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. " ::= { sheAlarmHistoryControl 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2.4 sheAlarmHistoryControlTimeStamp OBJECT-TYPE SYNTAX Unsigned32 UNITS "sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp of the last command (end of command). " ::= { sheAlarmHistoryControl 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2.5 sheAlarmHistoryControlReqResult OBJECT-TYPE SYNTAX SheAlarmControlRequestResultType MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the last user command." ::= { sheAlarmHistoryControl 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2.6 sheAlarmHistoryControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/ disable alarm history in NE. " ::= { sheAlarmHistoryControl 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2.7 sheAlarmHistoryControlEntryNumber OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of the alarm history entries to keep." ::= { sheAlarmHistoryControl 7 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.2.8 sheAlarmHistoryControlSeverityLevel OBJECT-TYPE SYNTAX SheAlarmSeverityType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the minimum level of alarms which should be stored in alarm history. All alarms of higher priority will also be stored in that case. If set to critical(1) only critical alarms will be stored. If set to warning(4) all alarms will be stored. The level cleared(5) is not a valid configuration!" ::= { sheAlarmHistoryControl 8 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.3 sheAlarmHistoryNotifications OBJECT IDENTIFIER ::= { sheAlarmHistory 3 } sheAlarmHistoryEnabledChanged NOTIFICATION-TYPE OBJECTS { sheAlarmHistoryEnabled, sheAlarmHistoryControlTimeStamp } STATUS current DESCRIPTION "Alarm history enabled changed." ::= { sheAlarmHistoryNotifications 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.3.1 sheAlarmHistoryBaseChanged NOTIFICATION-TYPE OBJECTS { sheAlarmHistoryEntryNumber, sheAlarmHistorySeverityLevel, sheAlarmHistoryControlTimeStamp } STATUS current DESCRIPTION "Alarm history base parameter changed." ::= { sheAlarmHistoryNotifications 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.3.2 sheAlarmHistoryCleared NOTIFICATION-TYPE OBJECTS { sheAlarmHistoryControlTimeStamp } STATUS current DESCRIPTION "Alarm hsitory table cleared." ::= { sheAlarmHistoryNotifications 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4 sheAlarmHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF SheAlarmHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The alarm history table is used to store all reported alarms. " ::= { sheAlarmHistory 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4.1 sheAlarmHistoryEntry OBJECT-TYPE SYNTAX SheAlarmHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of the alarm history table." INDEX { sheAlarmHistoryIndex } ::= { sheAlarmHistoryTable 1 } SheAlarmHistoryEntry ::= SEQUENCE { sheAlarmHistoryIndex Unsigned32, sheAlarmHistoryArisalTimeAndDate TimeTicks, sheAlarmHistoryClearingTimeAndDate TimeTicks, sheAlarmHistoryAlarmID OBJECT IDENTIFIER, sheAlarmHistoryReportingSource Unsigned32, sheAlarmHistoryReportingSourceType SheReportingSourceType, sheAlarmHistorySeverity SheAlarmSeverityType } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4.1.1 sheAlarmHistoryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-only STATUS current DESCRIPTION " The index of table. The range depends on setting of sheAlarmHistoryEntryNumber." ::= { sheAlarmHistoryEntry 1 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4.1.2 sheAlarmHistoryArisalTimeAndDate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time and date when the alarm notification was sent. " ::= { sheAlarmHistoryEntry 2 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4.1.3 sheAlarmHistoryClearingTimeAndDate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time and date when the alarm clearing notification was sent. " ::= { sheAlarmHistoryEntry 3 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4.1.4 sheAlarmHistoryAlarmID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION " The OID of alarm. " ::= { sheAlarmHistoryEntry 4 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4.1.5 sheAlarmHistoryReportingSource OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The failed component which reports the alarm, e.g. the entPhysicalIndex in case of a card is reporting the alarm. " ::= { sheAlarmHistoryEntry 5 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4.1.6 sheAlarmHistoryReportingSourceType OBJECT-TYPE SYNTAX SheReportingSourceType MAX-ACCESS read-only STATUS current DESCRIPTION " The type of failed component. " ::= { sheAlarmHistoryEntry 6 } -- 1.3.6.1.4.1.231.7.1.2.2.1.3.2.6.4.1.7 sheAlarmHistorySeverity OBJECT-TYPE SYNTAX SheAlarmSeverityType MAX-ACCESS read-only STATUS current DESCRIPTION " The alarm severity of alarm. " ::= { sheAlarmHistoryEntry 7 } sheAlarmingConformance OBJECT IDENTIFIER ::= { sheAlarming 100 } sheAlarmingCompliances OBJECT IDENTIFIER ::= { sheAlarmingConformance 1 } sheAlarmingCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Description." MODULE -- this module MANDATORY-GROUPS { sheAlarmingNotificationGroup, sheAlarmingConfigurationGroup, sheAlarmHistoryGroup, sheAlarmHistoryNotificationGroup } ::= { sheAlarmingCompliances 1 } sheAlarmingGroups OBJECT IDENTIFIER ::= { sheAlarmingConformance 2 } sheAlarmingNotificationGroup OBJECT-GROUP OBJECTS { sheAlarmTimeAndDate, sheAlarmReportingSource, sheAlarmReportingSourceType, sheAlarmSeverity } STATUS current DESCRIPTION "Description." ::= { sheAlarmingGroups 1 } sheAlarmingConfigurationGroup OBJECT-GROUP OBJECTS { sheAlarmSevProfileIndex, sheAlarmSevProfileAlarmID, sheAlarmSevProfileSeverity, sheAlarmControlRequest, sheAlarmControlStatus, sheAlarmControlSevProfileIndex, sheAlarmControlAlarmID, sheAlarmControlSeverity, sheAlarmControlTimer, sheAlarmControlReqResult, sheAlarmControlTimeStamp, sheAlarmListIndex, sheAlarmListTimeAndDate, sheAlarmListAlarmID, sheAlarmListReportingSource, sheAlarmListReportingSourceType, sheAlarmListSeverity } STATUS current DESCRIPTION "Description." ::= { sheAlarmingGroups 2 } sheAlarmHistoryGroup OBJECT-GROUP OBJECTS { sheAlarmHistoryEnabled, sheAlarmHistoryEntryNumber, sheAlarmHistorySeverityLevel, sheAlarmHistoryControlRequest, sheAlarmHistoryControlStatus, sheAlarmHistoryControlTimer, sheAlarmHistoryControlTimeStamp, sheAlarmHistoryControlReqResult, sheAlarmHistoryControlEnabled, sheAlarmHistoryControlEntryNumber, sheAlarmHistoryControlSeverityLevel, sheAlarmHistoryIndex, sheAlarmHistoryArisalTimeAndDate, sheAlarmHistoryClearingTimeAndDate, sheAlarmHistoryAlarmID, sheAlarmHistoryReportingSource, sheAlarmHistoryReportingSourceType, sheAlarmHistorySeverity, sheAlarmHistoryLatestOverwriteTimeAndDate } STATUS current DESCRIPTION "Description." ::= { sheAlarmingGroups 3 } sheAlarmHistoryNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { sheAlarmHistoryEnabledChanged, sheAlarmHistoryBaseChanged, sheAlarmHistoryCleared } STATUS current DESCRIPTION "Description." ::= { sheAlarmingGroups 4 } END -- -- she-alarming-mib.mib --