------------------------------------------------------------------------------- -- file: SdslStats.mib -- -- description: -- This file contains the SNMP definitions for the SDSL Port Stats area. -- -- history: -- %%history-start%% -- 1999.05.17 jlafaye 31A1274: Rennes merge -- 1999.07.09 gbuzulie P.287086,P.282195,P.286946: check problem of -- compile,add nncSdslNearEndRawCRCError counter in -- nncSdslNearEndRawTable, nncSdslLineStatus INTEGER change to 1..34 -- comments are modified -- %%history-end%% -- -- Copyright 1998 Newbridge Networks Corporation. All Rights Reserved. ------------------------------------------------------------------------------- SDSL-STATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Gauge32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC ifIndex FROM IF-MIB nncExtensions FROM NNCGNI0001-SMI; nncSdslStatistics MODULE-IDENTITY LAST-UPDATED "9809301200Z" ORGANIZATION "Newbridge Networks Corporation" CONTACT-INFO "Newbridge Networks Corporation Postal: 600 March Road Kanata, Ontario Canada K2K 2E6 Phone: +1 613 591 3600 Fax: +1 613 591 3680" DESCRIPTION "This module contains definitions for SDSL Ports Stats." ::= { nncExtensions 64 } ------------------------------------------------------------------------ nncSdslStatisticsObjects OBJECT IDENTIFIER ::= { nncSdslStatistics 1 } ------------------------------------------------------------------------ -- -- PHYSICAL LINE STATUS TABLE -- nncSdslLineStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF NncSdslLineStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table that contains the Status of all SDSL Lines." ::= { nncSdslStatisticsObjects 1 } nncSdslLineStatusEntry OBJECT-TYPE SYNTAX NncSdslLineStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Status of an SDSL Line." INDEX { ifIndex } ::= { nncSdslLineStatusTable 1 } NncSdslLineStatusEntry ::= SEQUENCE { nncSdslLineStatus INTEGER } nncSdslLineStatus OBJECT-TYPE SYNTAX INTEGER(1..34) MAX-ACCESS read-only STATUS current DESCRIPTION "Status indicates current state of the line. Unknown 0 Operational 1 Near End Loss Of Cell Delineation 2 Near End Loss Of Signal 3 Near End Loss Of Power 34" ::= { nncSdslLineStatusEntry 1 } -- -- NEAR END RAW COUNTERS TABLE -- nncSdslNearEndRawTable OBJECT-TYPE SYNTAX SEQUENCE OF NncSdslNearEndRawEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table that contains the Near End RAW Stats of all SDSL Ports." ::= { nncSdslStatisticsObjects 2 } nncSdslNearEndRawEntry OBJECT-TYPE SYNTAX NncSdslNearEndRawEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Near End Raw Stats of an SDSL Port." INDEX { ifIndex } ::= { nncSdslNearEndRawTable 1 } NncSdslNearEndRawEntry ::= SEQUENCE { nncSdslNearEndRawLOS Counter32, nncSdslNearEndRawLowNM Counter32, nncSdslNearEndRawLPR Counter32, nncSdslNearEndRawLOCD Counter32, nncSdslNearEndRawCRCError Counter32 } nncSdslNearEndRawLOS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Signal failures since system reset." ::= { nncSdslNearEndRawEntry 1 } nncSdslNearEndRawLowNM OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Low Noise Margin failures since system reset." ::= { nncSdslNearEndRawEntry 2 } nncSdslNearEndRawLPR OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Power failures since system reset." ::= { nncSdslNearEndRawEntry 3 } nncSdslNearEndRawLOCD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Cell Delineation failures since system reset." ::= { nncSdslNearEndRawEntry 4 } nncSdslNearEndRawCRCError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of CRC Errors since system reset." ::= { nncSdslNearEndRawEntry 5 } -- -- NEAR END 15 MINUTES CURRENT COUNTERS TABLE -- nncSdslNearEndCurr15MinTable OBJECT-TYPE SYNTAX SEQUENCE OF NncSdslNearEndCurr15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table that contains the Near End 15 minutes current Stats of all SDSL Ports." ::= { nncSdslStatisticsObjects 3 } nncSdslNearEndCurr15MinEntry OBJECT-TYPE SYNTAX NncSdslNearEndCurr15MinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Near End 15 minutes current Stats of an SDSL Port." INDEX { ifIndex } ::= { nncSdslNearEndCurr15MinTable 1 } NncSdslNearEndCurr15MinEntry ::= SEQUENCE { nncSdslNearEndCurr15MinTimeElapsed Gauge32, nncSdslNearEndCurr15MinLOSS Gauge32, nncSdslNearEndCurr15MinLOSWS Gauge32, nncSdslNearEndCurr15MinLowNMS Gauge32, nncSdslNearEndCurr15MinLPRS Gauge32, nncSdslNearEndCurr15MinErrS Gauge32 } nncSdslNearEndCurr15MinTimeElapsed OBJECT-TYPE SYNTAX Gauge32(0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. A full interval is 900 seconds." ::= { nncSdslNearEndCurr15MinEntry 1 } nncSdslNearEndCurr15MinLOSS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Signal status not due to a Loss of Power in the current 15 minutes interval." ::= { nncSdslNearEndCurr15MinEntry 2 } nncSdslNearEndCurr15MinLOSWS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal in the current 15 minutes interval." ::= { nncSdslNearEndCurr15MinEntry 3 } nncSdslNearEndCurr15MinLowNMS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Low Noise Margin status in the current 15 minutes interval." ::= { nncSdslNearEndCurr15MinEntry 4 } nncSdslNearEndCurr15MinLPRS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Power status in the current 15 minutes interval." ::= { nncSdslNearEndCurr15MinEntry 5 } nncSdslNearEndCurr15MinErrS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined." ::= { nncSdslNearEndCurr15MinEntry 6 } -- -- NEAR END 1 DAY CURRENT COUNTERS TABLE -- nncSdslNearEndCurr1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF NncSdslNearEndCurr1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table that contains the Near End 1 Day current Stats of all SDSL Ports." ::= { nncSdslStatisticsObjects 4 } nncSdslNearEndCurr1DayEntry OBJECT-TYPE SYNTAX NncSdslNearEndCurr1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Near End 1 Day current Stats of an SDSL Port." INDEX { ifIndex } ::= { nncSdslNearEndCurr1DayTable 1 } NncSdslNearEndCurr1DayEntry ::= SEQUENCE { nncSdslNearEndCurr1DayTimeElapsed Gauge32, nncSdslNearEndCurr1DayLOSS Gauge32, nncSdslNearEndCurr1DayLOSWS Gauge32, nncSdslNearEndCurr1DayLowNMS Gauge32, nncSdslNearEndCurr1DayLPRS Gauge32, nncSdslNearEndCurr1DayErrS Gauge32 } nncSdslNearEndCurr1DayTimeElapsed OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapses since the beginning of the current 1 Day interval." ::= { nncSdslNearEndCurr1DayEntry 1 } nncSdslNearEndCurr1DayLOSS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Signal status not due to a Loss of Power during the current day." ::= { nncSdslNearEndCurr1DayEntry 2 } nncSdslNearEndCurr1DayLOSWS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal during the current day." ::= { nncSdslNearEndCurr1DayEntry 3 } nncSdslNearEndCurr1DayLowNMS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Low Noise Margin status during the current day." ::= { nncSdslNearEndCurr1DayEntry 4 } nncSdslNearEndCurr1DayLPRS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Power status during the current day." ::= { nncSdslNearEndCurr1DayEntry 5 } nncSdslNearEndCurr1DayErrS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds during the current day. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined." ::= { nncSdslNearEndCurr1DayEntry 6 } -- -- NEAR END 1 DAY PREVIOUS COUNTERS TABLE -- nncSdslNearEndPrev1DayTable OBJECT-TYPE SYNTAX SEQUENCE OF NncSdslNearEndPrev1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table that contains the Near End 1 DAY PREVIOUS Stats of all SDSL Ports." ::= { nncSdslStatisticsObjects 5 } nncSdslNearEndPrev1DayEntry OBJECT-TYPE SYNTAX NncSdslNearEndPrev1DayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Near End 1 Day PREVIOUS Stats of an SDSL Port." INDEX { ifIndex } ::= { nncSdslNearEndPrev1DayTable 1 } NncSdslNearEndPrev1DayEntry ::= SEQUENCE { nncSdslNearEndPrev1DayMoniSecs Gauge32, nncSdslNearEndPrev1DayLOSS Gauge32, nncSdslNearEndPrev1DayLOSWS Gauge32, nncSdslNearEndPrev1DayLowNMS Gauge32, nncSdslNearEndPrev1DayLPRS Gauge32, nncSdslNearEndPrev1DayErrS Gauge32, nncSdslNearEndPrev1DayValidData TruthValue } nncSdslNearEndPrev1DayMoniSecs OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time in the PREVIOUS 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring information can not be collected for any reason. Typically Elapsed 1-day Time will be copied into Monitored Seconds when the 1-day roll-over occurs." ::= { nncSdslNearEndPrev1DayEntry 1 } nncSdslNearEndPrev1DayLOSS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Signal status not due to a Loss of Power within the most recent PREVIOUS 1 day period." ::= { nncSdslNearEndPrev1DayEntry 2 } nncSdslNearEndPrev1DayLOSWS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal within the most recent PREVIOUS 1 day period." ::= { nncSdslNearEndPrev1DayEntry 3 } nncSdslNearEndPrev1DayLowNMS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Low Noise Margin status within the most recent PREVIOUS 1 day period." ::= { nncSdslNearEndPrev1DayEntry 4 } nncSdslNearEndPrev1DayLPRS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of seconds in Loss of Power status within the most recent PREVIOUS 1 day period." ::= { nncSdslNearEndPrev1DayEntry 5 } nncSdslNearEndPrev1DayErrS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds within the most recent PREVIOUS 1 day period. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined." ::= { nncSdslNearEndPrev1DayEntry 6 } nncSdslNearEndPrev1DayValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if there is valid data for this interval." ::= { nncSdslNearEndPrev1DayEntry 7 } -- -- ALL FAR END COUNTERS TABLE -- nncSdslFarEndAllTable OBJECT-TYPE SYNTAX SEQUENCE OF NncSdslFarEndAllEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table that contains ALL the Far End Stats of all SDSL Ports." ::= { nncSdslStatisticsObjects 6 } nncSdslFarEndAllEntry OBJECT-TYPE SYNTAX NncSdslFarEndAllEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ALL the Far End Stats of an SDSL Port." INDEX { ifIndex } ::= { nncSdslFarEndAllTable 1 } NncSdslFarEndAllEntry ::= SEQUENCE { nncSdslFarEndRawLOCD Counter32, nncSdslFarEndCurr15MinTimeElapsed Gauge32, nncSdslFarEndCurr15MinErrS Gauge32, nncSdslFarEndCurr1DayTimeElapsed Gauge32, nncSdslFarEndCurr1DayErrS Gauge32, nncSdslFarEndPrev1DayMoniSecs Gauge32, nncSdslFarEndPrev1DayErrS Gauge32, nncSdslFarEndPrev1DayValidData TruthValue } -- RAW COUNTERS -- nncSdslFarEndRawLOCD OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of Loss of Cell Delineation failures since system reset." ::= { nncSdslFarEndAllEntry 1 } -- 15 MIN CURRENT COUNTERS -- nncSdslFarEndCurr15MinTimeElapsed OBJECT-TYPE SYNTAX Gauge32(0..900) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Total elapsed seconds in this interval. A full interval is 900 seconds." ::= { nncSdslFarEndAllEntry 2 } nncSdslFarEndCurr15MinErrS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined." ::= { nncSdslFarEndAllEntry 3 } -- 1 DAY CURRENT COUNTERS -- nncSdslFarEndCurr1DayTimeElapsed OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds that have elapses since the beginning of the current 1 Day interval." ::= { nncSdslFarEndAllEntry 4 } nncSdslFarEndCurr1DayErrS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined." ::= { nncSdslFarEndAllEntry 5 } -- 1 DAY PREVIOUS COUNTERS -- nncSdslFarEndPrev1DayMoniSecs OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time in the PREVIOUS 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring information can not be collected for any reason. Typically Elapsed 1-day Time will be copied into Monitored Seconds when the 1-day roll-over occurs." ::= { nncSdslFarEndAllEntry 6 } nncSdslFarEndPrev1DayErrS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds within the most recent PREVIOUS 1 day period. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined." ::= { nncSdslFarEndAllEntry 7 } nncSdslFarEndPrev1DayValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if there is valid data for this interval." ::= { nncSdslFarEndAllEntry 8 } -- -- NEAR END INTERVALS COUNTERS TABLE -- nncSdslNearEndIntTable OBJECT-TYPE SYNTAX SEQUENCE OF NncSdslNearEndIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table that contains the Near End 15 Minutes Intervals Stats of all SDSL Ports." ::= { nncSdslStatisticsObjects 7 } nncSdslNearEndIntEntry OBJECT-TYPE SYNTAX NncSdslNearEndIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One interval of Near End Stats of an SDSL Port." INDEX { ifIndex, nncSdslNearEndIntNumber } ::= { nncSdslNearEndIntTable 1 } NncSdslNearEndIntEntry ::= SEQUENCE { nncSdslNearEndIntNumber INTEGER, nncSdslNearEndIntLOSS Gauge32, nncSdslNearEndIntLOSWS Gauge32, nncSdslNearEndIntLowNMS Gauge32, nncSdslNearEndIntLPRS Gauge32, nncSdslNearEndIntErrS Gauge32, nncSdslNearEndIntValidData TruthValue } nncSdslNearEndIntNumber OBJECT-TYPE SYNTAX INTEGER(1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Data Interval number. 1 is the the most recent interval; interval 96 is 24 hours ago. Interval 2..96 are optional." ::= { nncSdslNearEndIntEntry 1 } nncSdslNearEndIntLOSS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Signal not due to a Loss of Power." ::= { nncSdslNearEndIntEntry 2 } nncSdslNearEndIntLOSWS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Signal not folloew by Loss of Signal." ::= { nncSdslNearEndIntEntry 3 } nncSdslNearEndIntLowNMS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Low Noise Margin." ::= { nncSdslNearEndIntEntry 4 } nncSdslNearEndIntLPRS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Power." ::= { nncSdslNearEndIntEntry 5 } nncSdslNearEndIntErrS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined." ::= { nncSdslNearEndIntEntry 6 } nncSdslNearEndIntValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if there is valid data for this interval." ::= { nncSdslNearEndIntEntry 7 } -- -- FAR END INTERVALS COUNTERS TABLE -- nncSdslFarEndIntTable OBJECT-TYPE SYNTAX SEQUENCE OF NncSdslFarEndIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table that contains the Far End 15 Minutes Intervals Stats of all SDSL Ports." ::= { nncSdslStatisticsObjects 8 } nncSdslFarEndIntEntry OBJECT-TYPE SYNTAX NncSdslFarEndIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One interval of Far End Stats of an SDSL Port." INDEX { ifIndex, nncSdslFarEndIntNumber } ::= { nncSdslFarEndIntTable 1 } NncSdslFarEndIntEntry ::= SEQUENCE { nncSdslFarEndIntNumber INTEGER, nncSdslFarEndIntErrS Gauge32, nncSdslFarEndIntValidData TruthValue } nncSdslFarEndIntNumber OBJECT-TYPE SYNTAX INTEGER(1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Data Interval number. 1 is the the most recent interval; interval 96 is 24 hours ago. Interval 2..96 are optional." ::= { nncSdslFarEndIntEntry 1 } nncSdslFarEndIntErrS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined." ::= { nncSdslFarEndIntEntry 2 } nncSdslFarEndIntValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if there is valid data for this interval." ::= { nncSdslFarEndIntEntry 3 } ------------------------------------------------------------------------------- -- Review Minutes ------------------------------------------------------------------------------- -- MINUTES-BEGIN -- REVIEW-DATE "1998.09.29" -- BODY " -- -- -- TO: Randy JONES, Karl TOOMPU, Chuong NGO and Francis OUATON, -- Fabrice GIL -- FROM: Fred MAYMIL -- -- A message was sent out on 1998.09.17 to electronically review -- SdslStats.mib. -- -- Outcome: -- -- It was the consensus of the review team that this file is -- acceptable with the few indicated modifications -- (note that the low number of comment is greatly due to the fact -- that this SDSL Mib comes partially from the SDSL Mib defined by -- the ADSL Forum) -- -- Actions: -- A1 - Fred MAYMIL to update the file as indicated in Comments below. -- Response: Status: completed -- -- Comments: -- 1) - Misuse of the word "Card" instead of Port in some comments. -- 2) - Use "Far End" and "Near End" instead of "Atuc" and "Atur" -- inherited from ASDL Mib in almost all object names. -- 3) - Split second Table "nncSdslNearEndTable" too big for SNMP v1 -- in 4 smaller Tables "Raw", "Curr15Min", "Curr1Day", "Prev1Day". -- 4) - Add "nnc" prefix to each object name to emphasize the fact that -- this Mib is a Newbridge Private Mib. -- -- " -- -- END-MINUTES -- -- -- MINUTES-BEGIN -- REVIEW-DATE "1999.07.07" -- BODY " -- -- -- TO: Jeffrey B.KENNEY and Fred MAYMIL, -- Fabrice GIL -- FROM: Gil BUZULIER -- -- A message was sent out on 1999.07.07 to electronically review -- SdslStats.mib. -- -- Outcome: -- -- It was the consensus of the review team that this file is -- acceptable with the few indicated modifications -- -- Actions: -- A1 - Gil Buzulier to update the file as indicated in Comments below. -- Response: Status: completed -- -- Comments: -- 1) - modify comments to take into account the last state of -- nncSdslLineStatus counter. -- 2) - Add nncSdslFarEndIntNumber and nncSdslNearEndIntNumber -- counters to resolve an error of compilation. -- 3) - Add nncSdslNearEndRawCRCError counter in the nncSdslNearEndRawTable. -- -- " -- -- END-MINUTES ------------------------------------------------------------------------------- END