SCM-CONTAINER-MIB2 DEFINITIONS ::= BEGIN

IMPORTS
    enterprises, MODULE-IDENTITY, Integer32
        FROM SNMPv2-SMI;

scmcontainer MODULE-IDENTITY
    LAST-UPDATED "0609201255Z"
    ORGANIZATION "Sun Microsystems Inc."
    CONTACT-INFO
        "        Sun Microsystems Inc.
       Customer Support
            Postal: 901 San Antonio Road 
       Palo Alto, CA-94303-4900
    USA
                         Tel: 650-960-1300
                E-mail: service@sun.com"
    DESCRIPTION
        "The Solaris Container Manager module monitors containers on the local host"
    ::= { modules 85 }
modules	OBJECT IDENTIFIER ::= { agent 2 }

agent	OBJECT IDENTIFIER ::= { sunsymon 2 }

sunsymon	OBJECT IDENTIFIER ::= { prod 12 }

prod	OBJECT IDENTIFIER ::= { sun 2 }

sun	OBJECT IDENTIFIER ::= { enterprises 42 }


admin	OBJECT IDENTIFIER ::= { scmcontainer 1 }

RowStatus ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
               "RowStatus"
    SYNTAX       INTEGER {
                     -- the following two values are states:
                     -- these values may be read or written
                     active(1),
                     notInService(2),

                     -- the following value is a state:
                     -- this value may be read, but not written
                     notReady(3),

                     -- the following three values are
                     -- actions: these values may be written,
                     --   but are never read
                     createAndGo(4),
                     createAndWait(5),
                     destroy(6)
                 }

DisplayString ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "255a"
    STATUS       current
    DESCRIPTION
            "Represents textual information taken from the NVT ASCII
            character set, as defined in pages 4, 10-11 of RFC 854.

            To summarize RFC 854, the NVT ASCII repertoire specifies:

              - the use of character codes 0-127 (decimal)

              - the graphics characters (32-126) are interpreted as
                US ASCII

              - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
                meanings specified in RFC 854

              - the other 25 codes have no standard interpretation

              - the sequence 'CR LF' means newline

              - the sequence 'CR NUL' means carriage-return

              - an 'LF' not preceded by a 'CR' means moving to the
                same column on the next line.

              - the sequence 'CR x' for any x other than LF or NUL is
                illegal.  (Note that this also means that a string may
                end with either 'CR LF' or 'CR NUL', but not with CR.)

            Any object defined using this syntax may not exceed 255
            characters in length."
    SYNTAX       OCTET STRING (SIZE (0..255))

trapAck OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Integer value"
    ::= { admin 1 }

projectTimestamp OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { admin 2 }

poolconfTimestamp OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { admin 3 }

version OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { admin 4 }

system	OBJECT IDENTIFIER ::= { scmcontainer 2 }

configuration	OBJECT IDENTIFIER ::= { system 1 }

configurationHostName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 1 }

operatingSystem OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 2 }

platform OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 3 }

memory OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "MB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 4 }

configurationCpus OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 5 }

cpuClockFrequency OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "MHz"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 6 }

networkInterfaces OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 7 }

locales OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 8 }

termTypes OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 9 }

timezones OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { configuration 10 }

containers	OBJECT IDENTIFIER ::= { scmcontainer 3 }

contTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ContEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    ::= { containers 1 }

contEntry OBJECT-TYPE
    SYNTAX      ContEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    INDEX  { contEntryZoneName,
              projectID }
    ::= { contTable 1 }

ContEntry ::=
    SEQUENCE {
        contEntryrowstatus
            RowStatus,
        contEntryZoneName
            DisplayString,
        contID
            DisplayString,
        contName
            DisplayString,
        projectID
            DisplayString,
        projectName
            DisplayString,
        primaryUsers
            DisplayString,
        contEntryPoolName
            DisplayString,
        poolSize
            Integer32,
        contEntryCpuRes
            DisplayString,
        cpuUsage
            DisplayString,
        cpuPctUsed
            DisplayString,
        cpuROI
            DisplayString,
        cpuExacct
            DisplayString,
        memCap
            DisplayString,
        memVirtual
            DisplayString,
        memRSS
            DisplayString,
        memPctUsed
            DisplayString,
        memROI
            DisplayString,
        memExacct
            DisplayString,
        users
            DisplayString,
        groups
            DisplayString,
        comment
            DisplayString,
        matchexpr
            DisplayString,
        procsRunning
            Integer32,
        defaultContainer
            Integer32,
        maxSHMMemory
            DisplayString
    }

contEntryrowstatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Table row status"
    ::= { contEntry 1 }

contEntryZoneName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 2 }

contID OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 3 }

contName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 4 }

projectID OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 5 }

projectName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 6 }

primaryUsers OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 7 }

contEntryPoolName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 8 }

poolSize OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Integer value"
    ::= { contEntry 9 }

contEntryCpuRes OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 10 }

cpuUsage OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "CPUs"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 11 }

cpuPctUsed OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 12 }

cpuROI OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 13 }

cpuExacct OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 14 }

memCap OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "MB"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 15 }

memVirtual OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "MB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 16 }

memRSS OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "MB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 17 }

memPctUsed OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 18 }

memROI OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "%"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 19 }

memExacct OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "MB"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Floating point value"
    ::= { contEntry 20 }

users OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 21 }

groups OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 22 }

comment OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 23 }

matchexpr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 24 }

procsRunning OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Integer value"
    ::= { contEntry 25 }

defaultContainer OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Integer value"
    ::= { contEntry 26 }

maxSHMMemory OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "MB"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { contEntry 27 }

processorSets	OBJECT IDENTIFIER ::= { scmcontainer 4 }

psrSetTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PsrSetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    ::= { processorSets 1 }

psrSetEntry OBJECT-TYPE
    SYNTAX      PsrSetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    INDEX  { psrsetName }
    ::= { psrSetTable 1 }

PsrSetEntry ::=
    SEQUENCE {
        psrSetEntryrowstatus
            RowStatus,
        psrsetName
            DisplayString,
        psrsetID
            DisplayString,
        minCpuSize
            DisplayString,
        cpuSize
            DisplayString,
        maxCpuSize
            DisplayString,
        psrSetEntryObjectives
            DisplayString
    }

psrSetEntryrowstatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Table row status"
    ::= { psrSetEntry 1 }

psrsetName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { psrSetEntry 2 }

psrsetID OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { psrSetEntry 3 }

minCpuSize OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { psrSetEntry 4 }

cpuSize OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { psrSetEntry 5 }

maxCpuSize OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { psrSetEntry 6 }

poolEntryObjectives OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { psrSetEntry 7 }

pools	OBJECT IDENTIFIER ::= { scmcontainer 5 }

poolTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PoolEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    ::= { pools 1 }

poolEntry OBJECT-TYPE
    SYNTAX      PoolEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    INDEX  { poolEntryPoolName }
    ::= { poolTable 1 }

PoolEntry ::=
    SEQUENCE {
        poolEntryrowstatus
            RowStatus,
        poolEntryPoolName
            DisplayString,
        poolEntryCpus
            DisplayString,
        psetName
            DisplayString,
        schedClass
            DisplayString,
        default
            DisplayString,
        mincpus
            DisplayString,
        maxcpus
            DisplayString,
        poolEntryObjectives
            DisplayString,
        maxCPUShares
            DisplayString
    }

poolEntryrowstatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Table row status"
    ::= { poolEntry 1 }

poolEntryPoolName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 2 }

poolEntryCpus OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 3 }

psetName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 4 }

schedClass OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 5 }

default OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 6 }

mincpus OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 7 }

maxcpus OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 8 }

psrSetEntryObjectives OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 9 }

maxCPUShares OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { poolEntry 10 }

zones	OBJECT IDENTIFIER ::= { scmcontainer 6 }

zoneTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ZoneEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    ::= { zones 1 }

zoneEntry OBJECT-TYPE
    SYNTAX      ZoneEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    INDEX  { zoneEntryName }
    ::= { zoneTable 1 }

ZoneEntry ::=
    SEQUENCE {
        zoneEntryrowstatus
            RowStatus,
        zoneEntryName
            DisplayString,
        zoneID
            DisplayString,
        zonePath
            DisplayString,
        zoneEntryPoolName
            DisplayString,
        zoneEntryCpuRes
            DisplayString,
        zoneIPAddr
            DisplayString,
        zonePhysicalAddr
            DisplayString,
        zoneHostName
            DisplayString,
        zoneState
            DisplayString,
        ipqosEnabled
            DisplayString,
        ipBandWidth
            DisplayString,
        opBandWidth
            DisplayString,
        ipbwUsed
            DisplayString,
        ipbwUsage
            DisplayString,
        opbwUsed
            DisplayString,
        opbwUsage
            DisplayString,
        maxZoneCPUShares
            DisplayString,
        zoneAutoBoot
            DisplayString,
        extraZoneAttr
            DisplayString
    }

zoneEntryrowstatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Table row status"
    ::= { zoneEntry 1 }

zoneEntryName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 2 }

zoneID OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 3 }

zonePath OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 4 }

zoneEntryPoolName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 5 }

zoneEntryCpuRes OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 6 }

zoneIPAddr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 7 }

zonePhysicalAddr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 8 }

zoneHostName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 9 }

zoneState OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 10 }

ipqosEnabled OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 11 }

ipBandWidth OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 12 }

opBandWidth OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 13 }

ipbwUsed OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "bytes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 14 }

ipbwUsage OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "bytes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 15 }

opbwUsed OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "bytes"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 16 }

opbwUsage OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       "bytes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 17 }

maxZoneCPUShares OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 18 }

zoneAutoBoot OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 19 }

extraZoneAttr OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { zoneEntry 20 }

sysID	OBJECT IDENTIFIER ::= { scmcontainer 7 }

sysidTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF SysidEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    ::= { sysID 1 }

sysidEntry OBJECT-TYPE
    SYNTAX      SysidEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    INDEX  { sysidEntryZoneName }
    ::= { sysidTable 1 }

SysidEntry ::=
    SEQUENCE {
        sysidEntryrowstatus
            RowStatus,
        sysidEntryZoneName
            DisplayString,
        sysidEntryHostName
            DisplayString,
        locale
            DisplayString,
        rootPasswd
            DisplayString,
        termType
            DisplayString,
        nameService
            DisplayString,
        timeZone
            DisplayString,
        domainName
            DisplayString,
        nameServer
            DisplayString
    }

sysidEntryrowstatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Table row status"
    ::= { sysidEntry 1 }

sysidEntryZoneName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 2 }

sysidEntryHostName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 3 }

locale OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 4 }

rootPasswd OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 5 }

termType OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 6 }

nameService OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 7 }

timeZone OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 8 }

domainName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 9 }

nameServer OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { sysidEntry 10 }

action	OBJECT IDENTIFIER ::= { scmcontainer 8 }

moveProcToContainer OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { action 1 }
END