-- -- Copyright (c) 2010 by Ruckus Wireless, Inc. -- All Rights Reserved -- RUCKUS-ZD-AP-MIB DEFINITIONS ::= BEGIN IMPORTS ruckusZDWLANModule FROM RUCKUS-ROOT-MIB DisplayString, MacAddress, RowStatus, TruthValue FROM SNMPv2-TC OBJECT-GROUP FROM SNMPv2-CONF ifIndex, InterfaceIndex FROM IF-MIB MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI; ruckusZDAPMIB MODULE-IDENTITY LAST-UPDATED "201010150800Z" ORGANIZATION "Ruckus Wireless, Inc." CONTACT-INFO "Ruckus Wireless, Inc. Postal: 880 W Maude Ave Sunnyvale, CA 94085 USA EMail: support@ruckuswireless.com Phone: +1-650-265-4200" DESCRIPTION "Ruckus ZD WLAN Configuration mib" ::= { ruckusZDWLANModule 4 } ruckusZDAPObjects OBJECT IDENTIFIER ::= { ruckusZDAPMIB 1 } ruckusZDAPConfig OBJECT IDENTIFIER ::= { ruckusZDAPObjects 1 } ruckusZDAPConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusZDAPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ZD AP table." ::= { ruckusZDAPConfig 1 } ruckusZDAPConfigEntry OBJECT-TYPE SYNTAX RuckusZDAPConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies a ZoneDirector AP configuration per entry." INDEX { ruckusZDAPConfigID } ::= { ruckusZDAPConfigTable 1 } RuckusZDAPConfigEntry ::= SEQUENCE { ruckusZDAPConfigID INTEGER, ruckusZDAPConfigMacAddress MacAddress, ruckusZDAPConfigAPModel OCTET STRING, ruckusZDAPConfigDeviceName OCTET STRING, ruckusZDAPConfigDescription OCTET STRING, ruckusZDAPConfigLocation OCTET STRING, ruckusZDAPConfigGpsLatitude OCTET STRING, ruckusZDAPConfigGpsLongitude OCTET STRING, ruckusZDAPConfigIPVersion INTEGER, ruckusZDAPConfigIpAddressSettingMode INTEGER, ruckusZDAPConfigIpAddress IpAddress, ruckusZDAPConfigIpAddressMask IpAddress, ruckusZDAPConfigGatewayIpAddress IpAddress, ruckusZDAPConfigPrimaryDnsIpAddress IpAddress, ruckusZDAPConfigSecondaryDnsIpAddress IpAddress, ruckusZDAPConfigIpV6AddressSettingMode INTEGER, ruckusZDAPConfigIpV6Address OCTET STRING, ruckusZDAPConfigIpV6PrefixLen INTEGER, ruckusZDAPConfigGatewayIpV6Address OCTET STRING, ruckusZDAPConfigPrimaryDnsIpV6Address OCTET STRING, ruckusZDAPConfigSecondaryDnsV6IpAddress OCTET STRING, ruckusZDAPConfigRadioType INTEGER, ruckusZDAPConfigRadioChannel24 Integer32, ruckusZDAPConfigRadioTxPowerLevel24 INTEGER, ruckusZDAPConfigRadioWlanGroup24 OCTET STRING, ruckusZDAPConfigRadioEnableWlanService24 INTEGER, ruckusZDAPConfigRadioChannel5 Integer32, ruckusZDAPConfigRadioTxPowerLevel5 INTEGER, ruckusZDAPConfigRadioWlanGroup5 OCTET STRING, ruckusZDAPConfigRadioEnableWlanService5 INTEGER, ruckusZDAPConfigMeshConfigurationMode INTEGER, ruckusZDAPConfigUplinkSelectionMode INTEGER, ruckusZDAPConfigApproveMode INTEGER, ruckusZDAPConfigManagementAdmin INTEGER, ruckusZDAPConfigRebootNow INTEGER } ruckusZDAPConfigID OBJECT-TYPE SYNTAX INTEGER (1..5000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "AP ID.Max value:for zd1000,50;for zd1100,100;for zd3000,500;zd5000,1000" ::= { ruckusZDAPConfigEntry 1 } ruckusZDAPConfigMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "AP MAC Address." ::= { ruckusZDAPConfigEntry 2 } ruckusZDAPConfigAPModel OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "AP Model." ::= { ruckusZDAPConfigEntry 4 } ruckusZDAPConfigDeviceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "AP Name." ::= { ruckusZDAPConfigEntry 5 } ruckusZDAPConfigDescription OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "AP Description." ::= { ruckusZDAPConfigEntry 6 } ruckusZDAPConfigLocation OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "AP Location." ::= { ruckusZDAPConfigEntry 7 } ruckusZDAPConfigGpsLatitude OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP GPS location measured. the range is '-90,90'." ::= { ruckusZDAPConfigEntry 10 } ruckusZDAPConfigGpsLongitude OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP GPS location measured. the range is '-180,180'." ::= { ruckusZDAPConfigEntry 11 } ruckusZDAPConfigIPVersion OBJECT-TYPE SYNTAX INTEGER { ipv4(1), ipv6(2),dualstack(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP IP version " ::= { ruckusZDAPConfigEntry 14 } ruckusZDAPConfigIpAddressSettingMode OBJECT-TYPE SYNTAX INTEGER { admin-by-zd(1), admin-by-dhcp(2), admin-by-ap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP IP address configuration setting control. admin-by-zd: ap ipv4 address is set in static model by zd; admin-by-dhcp: ap ipv4 address is set in dhcp model by zd; admin-by-ap: ap ipv4 address is gotten by itself in ap." ::= { ruckusZDAPConfigEntry 15 } ruckusZDAPConfigIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The AP IP address." ::= { ruckusZDAPConfigEntry 16 } ruckusZDAPConfigIpAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The AP IP address mask." ::= { ruckusZDAPConfigEntry 17 } ruckusZDAPConfigGatewayIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Gateway IP Address." ::= { ruckusZDAPConfigEntry 20 } ruckusZDAPConfigIpV6AddressSettingMode OBJECT-TYPE SYNTAX INTEGER { admin-by-zd(1), admin-by-autoconfig(2), admin-by-ap(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP IPV6 address configuration setting control. admin-by-zd: ap ipv6 address is set in manual model by zd; admin-by-autoconfig: ap ipv6 address is set in autoconfig(from route server or dhcpv6 server) model by zd; admin-by-ap: ap ipv6 address is gotten by itself in ap." ::= { ruckusZDAPConfigEntry 21 } ruckusZDAPConfigIpV6Address OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP IPV6 address." ::= { ruckusZDAPConfigEntry 22 } ruckusZDAPConfigIpV6PrefixLen OBJECT-TYPE SYNTAX INTEGER (3..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP IPV6 prefix length." ::= { ruckusZDAPConfigEntry 23 } ruckusZDAPConfigGatewayIpV6Address OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Gateway IPV6 Address." ::= { ruckusZDAPConfigEntry 24 } ruckusZDAPConfigPrimaryDnsIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Primary DNS IP Address." ::= { ruckusZDAPConfigEntry 25 } ruckusZDAPConfigSecondaryDnsIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Secondary DNS IP Address." ::= { ruckusZDAPConfigEntry 26 } ruckusZDAPConfigPrimaryDnsIpV6Address OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Primary DNS IPV6 Address." ::= { ruckusZDAPConfigEntry 27 } ruckusZDAPConfigSecondaryDnsV6IpAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Secondary DNS IPV6 Address." ::= { ruckusZDAPConfigEntry 28 } ruckusZDAPConfigRadioType OBJECT-TYPE SYNTAX INTEGER { ieee80211bg(1), ieee80211na(2), ieee80211a(3), ieee80211n(4), ieee80211ng(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AP Wireless type." ::= { ruckusZDAPConfigEntry 30 } ruckusZDAPConfigRadioChannel24 OBJECT-TYPE SYNTAX Integer32 (0..11) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Channel selection on the 2.4 GHz radio. The AP radio channel, selectable 0, 1-11, 0 : auto channel selection, 1-11 : specific channel selection." ::= { ruckusZDAPConfigEntry 31 } ruckusZDAPConfigRadioTxPowerLevel24 OBJECT-TYPE SYNTAX INTEGER (0..25) UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Tx Power level selection on the 2.4 GHz radio, auto(25) | 0 to 24 corresponding to 0 to -24dB from max power. Now to be compatible with web, if txpower is more than 10, txpower will be set to 24(Min)." ::= { ruckusZDAPConfigEntry 32 } ruckusZDAPConfigRadioWlanGroup24 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP WLAN group (name) selection on the 2.4 GHz radio." ::= { ruckusZDAPConfigEntry 33 } ruckusZDAPConfigRadioEnableWlanService24 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP enable wlan service flag on the 2.4 GHz radio." ::= { ruckusZDAPConfigEntry 34 } ruckusZDAPConfigRadioChannel5 OBJECT-TYPE SYNTAX Integer32 (0 | 36..165) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Channel selection on the 5 GHz radio. The AP radio channel, selectable 0, 36-165, 0 : auto channel selection, 36-165 : specific channel selection. It is ruled by country code.Please consult the MAP of channel for each country." ::= { ruckusZDAPConfigEntry 40 } ruckusZDAPConfigRadioTxPowerLevel5 OBJECT-TYPE SYNTAX INTEGER (0..25) UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Tx Power level selection on the 5 GHz radio, auto(25) | 0 to 24 corresponding to 0 to -24dB from max power. Now to be compatible with web, if txpower is more than 10, txpower will be set to 24(Min)." ::= { ruckusZDAPConfigEntry 41 } ruckusZDAPConfigRadioWlanGroup5 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AP WLAN group (name) selection on the 5 GHz radio." ::= { ruckusZDAPConfigEntry 42 } ruckusZDAPConfigRadioEnableWlanService5 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP enable wlan service flag on the 5 GHz radio." ::= { ruckusZDAPConfigEntry 43 } ruckusZDAPConfigMeshConfigurationMode OBJECT-TYPE SYNTAX INTEGER { auto(1), root-ap(2), mesh-ap(3), disabled(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP Mesh network configuration mode." ::= { ruckusZDAPConfigEntry 50 } ruckusZDAPConfigUplinkSelectionMode OBJECT-TYPE SYNTAX INTEGER { smart(1), manual(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AP network uplink selection mode. For manual,now 'set' is not supported" ::= { ruckusZDAPConfigEntry 51 } ruckusZDAPConfigApproveMode OBJECT-TYPE SYNTAX INTEGER { approved(1), not-approved(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "AP approval state. For not-approved,'set' is not supported." ::= { ruckusZDAPConfigEntry 52 } ruckusZDAPConfigManagementAdmin OBJECT-TYPE SYNTAX INTEGER { delete(1), associated(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Admin action to remove this AP from the ZD management." ::= { ruckusZDAPConfigEntry 60 } ruckusZDAPConfigRebootNow OBJECT-TYPE SYNTAX INTEGER { reboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "AP reboot right now." ::= { ruckusZDAPConfigEntry 64 } END