-- RS Firmware Agent Capabilities macro RSTONE-RS-AGENTCAP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI AGENT-CAPABILITIES FROM SNMPv2-CONF riverstoneAgentCapabilities FROM RSTONE-SMI-MIB; rstoneRsAgentCapabilityMIB MODULE-IDENTITY LAST-UPDATED "200106210000Z" -- Jun 21, 2001 ORGANIZATION "Riverstone Networks, Inc" CONTACT-INFO "Riverstone Networks, Inc 5200 Great America Parkway Santa Clara CA USA 95054 PHONE:+1 408.878.6500 EMAIL: nms-eng@riverstonenet.com WEB: http://www.riverstonenet.com" DESCRIPTION "This module defines agent capabilities for Riverstone RS RapidOS Software Product." REVISION "200106210000Z" -- Jun 21, 2001 DESCRIPTION " Updated Agent Capabilities for firmware release 8.0" REVISION "200103110000Z" -- Mar 11, 2001 DESCRIPTION " Updated Agent Capabilities for firmware release 7.0" REVISION "200103070000Z" -- Mar 07, 2001 DESCRIPTION " Fixed some errors in Agent Capabilities for firmware release 6.3" REVISION "200012130000Z" DESCRIPTION " Updated Agent Capabilities for firmware release 6.2, 6.3" REVISION "200009180000Z" DESCRIPTION " Updated Agent Capabilities for ATM-MIB for firmware release 6.1.x" REVISION "200009120000Z" DESCRIPTION "Created agent capabilities mib for version 6.1.x of Riverstone RS RapidOS software product. For agent capabilities of older versions of RapidOS, refer ssr-agent-capabilities mib" ::= { riverstoneAgentCapabilities 1 } -- this branch is for device specific agent information descriptions via AGENT-CAPABILITIES macro rsCapability OBJECT IDENTIFIER ::= { rstoneRsAgentCapabilityMIB 1 } rs61x AGENT-CAPABILITIES PRODUCT-RELEASE "6.1.x" STATUS current DESCRIPTION "Firmware Release 6.1.x for Riverstone RS RapidOS product line. The firmware supports Cable Modem Head End card in release 6.1 and ATM OC12 card in release 6.1.1" REFERENCE "http://www.riverstonenet.com/products" -- RFC 1907 SUPPORTS SNMPv2-MIB INCLUDES { systemGroup, snmpGroup, snmpBasicNotificationsGroup, -- snmpSetGroup is not implemented, but is needed for SNMPv2-MIB compliance -- non mandatory groups snmpCommunityGroup, -- deprecated/obsolete support snmpObsoleteGroup } -- ********************* ************ ************ *************** *** -- RFC 2358 SUPPORTS EtherLike-MIB INCLUDES { etherStats100MbsGroup } -- ********************* ************ ************ *************** *** -- RFC 2233 SUPPORTS IF-MIB INCLUDES { ifGeneralInformationGroup, ifStackGroup2, ifCounterDiscontinuityGroup, -- non mandatory groups ifFixedLengthGroup, ifHCFixedLengthGroup, ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup, ifRcvAddressGroup, -- deprecated/obsolete support ifOldObjectsGroup } VARIATION ifAlias ACCESS read-only DESCRIPTION "ifAlias is guarenteed to be unique across reboots. It takes the form Type : instance info for example: ifAlias.49 = IP interface: to-sc-BGPfeed or ifAlias.42 = VLAN: test1 or ifAlias.35 = Physical port: et.14.5" VARIATION ifAdminStatus ACCESS read-only DESCRIPTION "For ifTypes corresponding to VLANs this object is read only." VARIATION ifLinkUpDownTrapEnable ACCESS read-only DESCRIPTION "For all ifTypes where ifConnectorPresent is not TRUE." VARIATION ifStackStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change relationships." -- ********************* ************ ************ *************** *** -- RFC 2011 SUPPORTS IP-MIB INCLUDES { ipGroup, icmpGroup } VARIATION ipDefaultTTL ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change default ttl." -- ********************* ************ ************ *************** *** -- RFC 2096 SUPPORTS IP-FORWARD-MIB INCLUDES { ipForwardCidrRouteGroup } VARIATION ipCidrRouteIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteInfo ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteNextHopAS ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." -- ********************* ************ ************ *************** *** -- RFC 2013 SUPPORTS UDP-MIB INCLUDES { udpGroup } -- ********************* ************ ************ *************** *** -- RFC 2012 SUPPORTS TCP-MIB INCLUDES { tcpGroup } VARIATION tcpConnState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to kill tcp sessions." -- ********************* ************ ************ *************** *** -- RFC 1657 -- SUPPORTS BGP4-MIB -- INCLUDES { -- This is an smiv1 mib, all objects read only. Specify in device config file to enable this mib. -- } -- ********************* ************ ************ *************** *** -- RFC 1850 -- Specify in device config file to enable this mib. SUPPORTS OSPF-MIB INCLUDES { ospfBasicGroup, ospfAreaGroup, ospfStubAreaGroup, ospfIfGroup, ospfIfMetricGroup, ospfVirtIfGroup, ospfNbrGroup, ospfVirtNbrGroup, ospfAreaAggregateGroup } VARIATION ospfRouterId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set router id." VARIATION ospfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf state." VARIATION ospfTOSSupport ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf TOS support." VARIATION ospfExtLsdbLimit ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Lsdb Limit." VARIATION ospfMulticastExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf multicast extensions." VARIATION ospfExitOverflowInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf exit overflow interval." VARIATION ospfDemandExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf demand extensions." VARIATION ospfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf authorisation types." VARIATION ospfImportAsExtern ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Import AS external routes." VARIATION ospfAreaSummary ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area summary importation." VARIATION ospfAreaStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ospf areas." VARIATION ospfStubMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area stub metric." VARIATION ospfStubStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete stub areas." VARIATION ospfStubMetricType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf stub metric type." VARIATION ospfAreaRangeMask ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area range mask." VARIATION ospfAreaRangeStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ranges." VARIATION ospfAreaRangeEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set area range effect." VARIATION ospfHostMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set host metric." VARIATION ospfHostStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete hosts." VARIATION ospfIfAreaId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface area id." VARIATION ospfIfType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface type." VARIATION ospfIfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface admin status." VARIATION ospfIfRtrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface router priority." VARIATION ospfIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface transit delay." VARIATION ospfIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface retransmission interval." VARIATION ospfIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set hello interval." VARIATION ospfIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set dead interval." VARIATION ospfIfPollInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set poll interval." VARIATION ospfIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface auth key." VARIATION ospfIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete interfaces." VARIATION ospfIfMulticastForwarding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set multicast fwd." VARIATION ospfIfDemand ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this attribute." VARIATION ospfIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfIfMetricValue ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbmaNbrStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." SUPPORTS OSPF-TRAP-MIB INCLUDES { ospfTrapControlGroup } -- ********************* ************ ************ *************** *** -- RFC 1724 -- Specify in device config file to enable this mib. SUPPORTS RIPv2-MIB INCLUDES { rip2GlobalGroup, rip2IfStatGroup, rip2IfConfGroup, rip2PeerGroup } VARIATION rip2IfStatStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDomain ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSend ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfReceive ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDefaultMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSrcAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1493 -- SUPPORTS BRIDGE-MIB -- INCLUDES { -- smiv1 mib -- } -- ********************* ************ ************ *************** *** -- RFC 2674 SUPPORTS Q-BRIDGE-MIB INCLUDES { qBridgeBaseGroup, qBridgeVlanGroup, qBridgeVlanStaticGroup, qBridgePortGroup, qBridgeFdbUnicastGroup, qBridgeServiceRequirementsGroup } -- note: qBridgeFdbMulticastGroup, mandatory, but not implemented in 6.1.x VARIATION dot1qGvrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "Firmware Version 6.1.x does not support GVRP/GARP." VARIATION dot1qForwardAllStaticPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardAllForbiddenPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardUnregisteredStaticPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardUnregisteredForbiddenPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticUnicastAllowedToGoTo ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticUnicastStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastStaticEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastForbiddenEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticName ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanForbiddenEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticUntaggedPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qPvid ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qPortAcceptableFrameTypes ACCESS read-only DEFVAL { admitAll } DESCRIPTION "RapidOS firmware 6.1.x does not support admitOnlyVlanTagged option." VARIATION dot1qPortIngressFiltering ACCESS read-only DEFVAL { true } DESCRIPTION "RapidOS firmware 6.1.x does not support false option per port." VARIATION dot1qPortGvrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "GVRP/GARP not supported in firmware 6.1.x." -- ********************* ************ ************ *************** *** -- RFC 2674 SUPPORTS P-BRIDGE-MIB INCLUDES { pBridgeExtCapGroup, pBridgeDevicePriorityGroup, pBridgeDefaultPriorityGroup, pBridgePriorityGroup, pBridgeHCPortGroup } VARIATION dot1dTrafficClassesEnabled ACCESS read-only DEFVAL { true } DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.1.x release." VARIATION dot1dGmrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "Not supported in release 6.1.x." VARIATION dot1dPortDefaultUserPriority ACCESS read-only DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.1.x release." VARIATION dot1dRegenUserPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1dTrafficClass ACCESS read-only DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.1.x release." -- ********************* ************ ************ *************** *** -- RFC 2115 SUPPORTS FRAME-RELAY-DTE-MIB INCLUDES { frPortGroup, frCircuitGroup, frErrGroup, frTrapGroup } VARIATION frDlcmiState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddressLen ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiPollingInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiFullEnquiryInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiErrorThreshold ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMonitoredEvents ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMaxSupportedVCs ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete dlcmi's." VARIATION frCircuitState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitCommittedBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitExcessBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitThroughput ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitLogicalIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1471 -- SUPPORTS PPP-LCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1472 -- SUPPORTS PPP-SEC-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1473 -- SUPPORTS PPP-IP-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1474 -- SUPPORTS PPP-BRIDGE-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 2495 SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup } VARIATION dsx1LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SignalMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Fdl ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Channelization ACCESS read-only DEFVAL { disabled } DESCRIPTION "RapidOS Firmware 6.1.x does not implement channelized T1/E1." -- ********************* ************ ************ *************** *** -- RFC 2496 SUPPORTS DS3-MIB INCLUDES { ds3NearEndConfigGroup, ds3NearEndStatisticsGroup } VARIATION dsx3LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3Channelization ACCESS read-only DEFVAL { disabled } DESCRIPTION "RapidOS 6.1.x Firmware does not support channelized T3/E3." VARIATION dsx3Ds1ForRemoteLoop ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1595 SUPPORTS SONET-MIB INCLUDES { sonetMediumStuff, sonetSectionStuff, sonetLineStuff, sonetFarEndLineStuff, sonetPathStuff, sonetFarEndPathStuff } -- ATM OC3 line cards with modular physical port (MODPHY) have above instrumentation -- POS OC3/12 line cards do not yet support the SONET-MIB -- ********************* ************ ************ *************** *** -- RFC 1695 SUPPORTS ATM-MIB INCLUDES { atmInterfaceConfGroup, atmTrafficDescrGroup, atmInterfaceDs3PlcpGroup, atmInterfaceTCGroup, atmVccTerminationGroup, aal5VccGroup } VARIATION atmInterfaceMaxVpcs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxVccs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVpiBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVciBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceIlmiVpi ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceIlmiVci ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceMyNeighborIpAddress ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceMyNeighborIfName ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmTrafficDescrParam1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficQoSClass ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrRowStatus ACCESS not-implemented DESCRIPTION "Table is read-only" VARIATION atmInterfaceDs3PlcpSEFSs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpUASs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceOCDEvents ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceTCAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVccAalType ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "This object is not settable" -- ********************* ************ ************ *************** *** -- RFC 2618 SUPPORTS RADIUS-AUTH-CLIENT-MIB INCLUDES { radiusAuthClientMIBGroup } -- ********************* ************ ************ *************** *** -- RFC 1757/2819 SUPPORTS RMON-MIB INCLUDES { rmonEtherStatsGroup, rmonHistoryControlGroup, rmonEthernetHistoryGroup, rmonAlarmGroup, rmonHostGroup, -- requires flow bridging hardware mode enabled rmonHostTopNGroup, rmonMatrixGroup, -- requires flow bridging hardware mode enabled rmonFilterGroup, rmonPacketCaptureGroup, rmonEventGroup, rmonNotificationGroup } -- ********************* ************ ************ *************** *** -- RFC 2021 SUPPORTS RMON2-MIB INCLUDES { protocolDirectoryGroup, protocolDistributionGroup, addressMapGroup, nlHostGroup, nlMatrixGroup, alHostGroup, alMatrixGroup, usrHistoryGroup, probeInformationGroup, probeConfigurationGroup, rmon1EthernetEnhancementGroup -- rmon1EnhancementGroup supported except for filterProtocolDirDataLocalIndex, -- filterProtocolDirLocalIndex } VARIATION filterProtocolDirDataLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in firmware version 6.1.x." VARIATION filterProtocolDirLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in firmware version 6.1.x." -- NOTE: Sets to this mib are not persistent. RMON configuration -- may be done via CLI for persistence -- ********************* ************ ************ *************** *** -- From ietf vrrp mib Draft #9 SUPPORTS VRRP-MIB INCLUDES { vrrpOperGroup, vrrpStatsGroup, vrrpTrapGroup, vrrpNotificationGroup } VARIATION vrrpOperAdminState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPrimaryIpAddr ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAdvertisementInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPreemptMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperProtocol ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpAssoIpAddrRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpTrapAuthFailure ACCESS not-implemented DESCRIPTION "TrapAuthFailure not implemented in 6.1.x." -- ********************* ************ ************ *************** *** SUPPORTS CTRON-LFAP-MIB INCLUDES { lfapConfGroupV40 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-POLICY-MIB INCLUDES { polGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CONFIG-MIB INCLUDES { configGroup20 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-HARDWARE-MIB INCLUDES { hwConfGroupV30 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-SERVICE-STATUS-MIB INCLUDES { ssConfGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CAPACITY-MIB INCLUDES { capConfGroupV10 } -- ********************* ************ ************ *************** *** SUPPORTS DOCS-IF-MIB INCLUDES { docsIfBasicGroup, docsIfCmtsGroup } VARIATION docsIfQosProfMaxTxBurst ACCESS read-write DESCRIPTION "This variable returns the value in bits/second rather than mini-slots because this is the expected type by Cablelabs." -- ********************* ************ ************ *************** *** SUPPORTS DOCS-BPI-MIB INCLUDES { docsBpiCmtsGroup } VARIATION docsBpiCmtsDefaultAuthLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsDefaultTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsAuthCmLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsAuthCmGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." VARIATION docsBpiCmtsTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsTEKGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." -- ********************* ************ ************ *************** *** SUPPORTS RIVERSTONE-STP-MIB INCLUDES { rsStpBaseGroup } VARIATION rsStpStatus ACCESS not-implemented DESCRIPTION "STP cannot be disabled globally on RS devices" ::= { rsCapability 1 } rs62x AGENT-CAPABILITIES PRODUCT-RELEASE "6.2.x" STATUS current DESCRIPTION "Firmware Release 6.2.x for Riverstone RS RapidOS product line. The firmware supports channelized T1/E1 card in release 6.2" REFERENCE "http://www.riverstonenet.com/products" -- RFC 1907 SUPPORTS SNMPv2-MIB INCLUDES { systemGroup, snmpGroup, snmpBasicNotificationsGroup, -- snmpSetGroup is not implemented, but is needed for SNMPv2-MIB compliance -- non mandatory groups snmpCommunityGroup, -- deprecated/obsolete support snmpObsoleteGroup } -- ********************* ************ ************ *************** *** -- RFC 2358 SUPPORTS EtherLike-MIB INCLUDES { etherStats100MbsGroup } -- ********************* ************ ************ *************** *** -- RFC 2233 SUPPORTS IF-MIB INCLUDES { ifGeneralInformationGroup, ifStackGroup2, ifCounterDiscontinuityGroup, -- non mandatory groups ifFixedLengthGroup, ifHCFixedLengthGroup, ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup, ifRcvAddressGroup, -- deprecated/obsolete support ifOldObjectsGroup } VARIATION ifAlias ACCESS read-only DESCRIPTION "ifAlias is guarenteed to be unique across reboots. It takes the form Type : instance info for example: ifAlias.49 = IP interface: to-sc-BGPfeed or ifAlias.42 = VLAN: test1 or ifAlias.35 = Physical port: et.14.5" VARIATION ifAdminStatus ACCESS read-only DESCRIPTION "For ifTypes corresponding to VLANs this object is read only." VARIATION ifLinkUpDownTrapEnable ACCESS read-only DESCRIPTION "For all ifTypes where ifConnectorPresent is not TRUE." VARIATION ifStackStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change relationships." -- ********************* ************ ************ *************** *** -- RFC 2011 SUPPORTS IP-MIB INCLUDES { ipGroup, icmpGroup } VARIATION ipDefaultTTL ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change default ttl." -- ********************* ************ ************ *************** *** -- RFC 2096 SUPPORTS IP-FORWARD-MIB INCLUDES { ipForwardCidrRouteGroup } VARIATION ipCidrRouteIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteInfo ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteNextHopAS ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." -- ********************* ************ ************ *************** *** -- RFC 2013 SUPPORTS UDP-MIB INCLUDES { udpGroup } -- ********************* ************ ************ *************** *** -- RFC 2012 SUPPORTS TCP-MIB INCLUDES { tcpGroup } VARIATION tcpConnState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to kill tcp sessions." -- ********************* ************ ************ *************** *** -- RFC 1657 -- SUPPORTS BGP4-MIB -- INCLUDES { -- This is an smiv1 mib, all objects read only. Specify in device config file to enable this mib. -- } -- ********************* ************ ************ *************** *** -- RFC 1850 -- Specify in device config file to enable this mib. SUPPORTS OSPF-MIB INCLUDES { ospfBasicGroup, ospfAreaGroup, ospfStubAreaGroup, ospfIfGroup, ospfIfMetricGroup, ospfVirtIfGroup, ospfNbrGroup, ospfVirtNbrGroup, ospfAreaAggregateGroup } VARIATION ospfRouterId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set router id." VARIATION ospfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf state." VARIATION ospfTOSSupport ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf TOS support." VARIATION ospfExtLsdbLimit ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Lsdb Limit." VARIATION ospfMulticastExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf multicast extensions." VARIATION ospfExitOverflowInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf exit overflow interval." VARIATION ospfDemandExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf demand extensions." VARIATION ospfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf authorisation types." VARIATION ospfImportAsExtern ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Import AS external routes." VARIATION ospfAreaSummary ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area summary importation." VARIATION ospfAreaStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ospf areas." VARIATION ospfStubMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area stub metric." VARIATION ospfStubStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete stub areas." VARIATION ospfStubMetricType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf stub metric type." VARIATION ospfAreaRangeMask ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area range mask." VARIATION ospfAreaRangeStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ranges." VARIATION ospfAreaRangeEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set area range effect." VARIATION ospfHostMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set host metric." VARIATION ospfHostStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete hosts." VARIATION ospfIfAreaId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface area id." VARIATION ospfIfType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface type." VARIATION ospfIfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface admin status." VARIATION ospfIfRtrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface router priority." VARIATION ospfIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface transit delay." VARIATION ospfIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface retransmission interval." VARIATION ospfIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set hello interval." VARIATION ospfIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set dead interval." VARIATION ospfIfPollInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set poll interval." VARIATION ospfIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface auth key." VARIATION ospfIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete interfaces." VARIATION ospfIfMulticastForwarding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set multicast fwd." VARIATION ospfIfDemand ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this attribute." VARIATION ospfIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfIfMetricValue ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbmaNbrStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." SUPPORTS OSPF-TRAP-MIB INCLUDES { ospfTrapControlGroup } -- ********************* ************ ************ *************** *** -- RFC 1724 -- Specify in device config file to enable this mib. SUPPORTS RIPv2-MIB INCLUDES { rip2GlobalGroup, rip2IfStatGroup, rip2IfConfGroup, rip2PeerGroup } VARIATION rip2IfStatStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDomain ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSend ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfReceive ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDefaultMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSrcAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1493 -- SUPPORTS BRIDGE-MIB -- INCLUDES { -- smiv1 mib -- } -- ********************* ************ ************ *************** *** -- RFC 2674 SUPPORTS Q-BRIDGE-MIB INCLUDES { qBridgeBaseGroup, qBridgeVlanGroup, qBridgeVlanStaticGroup, qBridgePortGroup, qBridgeFdbUnicastGroup, qBridgeServiceRequirementsGroup } -- note: qBridgeFdbMulticastGroup, mandatory, but not implemented in 6.2.x VARIATION dot1qGvrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "Firmware Version 6.2.x does not support GVRP/GARP." VARIATION dot1qForwardAllStaticPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardAllForbiddenPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardUnregisteredStaticPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardUnregisteredForbiddenPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticUnicastAllowedToGoTo ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticUnicastStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastStaticEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastForbiddenEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticName ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanForbiddenEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticUntaggedPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qPvid ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qPortAcceptableFrameTypes ACCESS read-only DEFVAL { admitAll } DESCRIPTION "RapidOS firmware 6.2.x does not support admitOnlyVlanTagged option." VARIATION dot1qPortIngressFiltering ACCESS read-only DEFVAL { true } DESCRIPTION "RapidOS firmware 6.2.x does not support false option per port." VARIATION dot1qPortGvrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "GVRP/GARP not supported in firmware 6.2.x." -- ********************* ************ ************ *************** *** -- RFC 2674 SUPPORTS P-BRIDGE-MIB INCLUDES { pBridgeExtCapGroup, pBridgeDevicePriorityGroup, pBridgeDefaultPriorityGroup, pBridgePriorityGroup, pBridgeHCPortGroup } VARIATION dot1dTrafficClassesEnabled ACCESS read-only DEFVAL { true } DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.2.x release." VARIATION dot1dGmrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "Not supported in release 6.2.x." VARIATION dot1dPortDefaultUserPriority ACCESS read-only DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.2.x release." VARIATION dot1dRegenUserPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1dTrafficClass ACCESS read-only DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.2.x release." -- ********************* ************ ************ *************** *** -- RFC 2115 SUPPORTS FRAME-RELAY-DTE-MIB INCLUDES { frPortGroup, frCircuitGroup, frErrGroup, frTrapGroup } VARIATION frDlcmiState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddressLen ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiPollingInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiFullEnquiryInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiErrorThreshold ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMonitoredEvents ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMaxSupportedVCs ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete dlcmi's." VARIATION frCircuitState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitCommittedBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitExcessBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitThroughput ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitLogicalIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1471 -- SUPPORTS PPP-LCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1472 -- SUPPORTS PPP-SEC-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1473 -- SUPPORTS PPP-IP-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1474 -- SUPPORTS PPP-BRIDGE-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 2495 SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup } VARIATION dsx1LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SignalMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Fdl ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Channelization ACCESS read-only DEFVAL { disabled } DESCRIPTION "RapidOS Firmware 6.2.x does not implement channelized T1/E1." -- ********************* ************ ************ *************** *** -- RFC 2496 SUPPORTS DS3-MIB INCLUDES { ds3NearEndConfigGroup, ds3NearEndStatisticsGroup } VARIATION dsx3LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3Channelization ACCESS read-only DEFVAL { disabled } DESCRIPTION "RapidOS 6.2.x Firmware does not support channelized T3/E3." VARIATION dsx3Ds1ForRemoteLoop ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1595 SUPPORTS SONET-MIB INCLUDES { sonetMediumStuff, sonetSectionStuff, sonetLineStuff, sonetFarEndLineStuff, sonetPathStuff, sonetFarEndPathStuff } -- ATM OC3 line cards with modular physical port (MODPHY) have above instrumentation -- POS OC3/12 line cards do not yet support the SONET-MIB -- ********************* ************ ************ *************** *** -- RFC 1695 SUPPORTS ATM-MIB INCLUDES { atmInterfaceConfGroup, atmTrafficDescrGroup, atmInterfaceDs3PlcpGroup, atmInterfaceTCGroup, atmVccTerminationGroup, aal5VccGroup } VARIATION atmInterfaceMaxVpcs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxVccs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVpiBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVciBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceIlmiVpi ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceIlmiVci ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceMyNeighborIpAddress ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceMyNeighborIfName ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmTrafficDescrParam1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficQoSClass ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrRowStatus ACCESS not-implemented DESCRIPTION "Table is read-only" VARIATION atmInterfaceDs3PlcpSEFSs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpUASs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceOCDEvents ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceTCAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVccAalType ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "This object is not settable" -- ********************* ************ ************ *************** *** -- RFC 2618 SUPPORTS RADIUS-AUTH-CLIENT-MIB INCLUDES { radiusAuthClientMIBGroup } -- ********************* ************ ************ *************** *** -- RFC 1757/2819 SUPPORTS RMON-MIB INCLUDES { rmonEtherStatsGroup, rmonHistoryControlGroup, rmonEthernetHistoryGroup, rmonAlarmGroup, rmonHostGroup, -- requires flow bridging hardware mode enabled rmonHostTopNGroup, rmonMatrixGroup, -- requires flow bridging hardware mode enabled rmonFilterGroup, rmonPacketCaptureGroup, rmonEventGroup, rmonNotificationGroup } -- ********************* ************ ************ *************** *** -- RFC 2021 SUPPORTS RMON2-MIB INCLUDES { protocolDirectoryGroup, protocolDistributionGroup, addressMapGroup, nlHostGroup, nlMatrixGroup, alHostGroup, alMatrixGroup, usrHistoryGroup, probeInformationGroup, probeConfigurationGroup, rmon1EthernetEnhancementGroup -- rmon1EnhancementGroup supported except for filterProtocolDirDataLocalIndex, -- filterProtocolDirLocalIndex } VARIATION filterProtocolDirDataLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in firmware version 6.2.x." VARIATION filterProtocolDirLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in firmware version 6.2.x." -- NOTE: Sets to this mib are not persistent. RMON configuration -- may be done via CLI for persistence -- ********************* ************ ************ *************** *** -- From ietf vrrp mib Draft #9 SUPPORTS VRRP-MIB INCLUDES { vrrpOperGroup, vrrpStatsGroup, vrrpTrapGroup, vrrpNotificationGroup } VARIATION vrrpOperAdminState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPrimaryIpAddr ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAdvertisementInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPreemptMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperProtocol ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpAssoIpAddrRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpTrapAuthFailure ACCESS not-implemented DESCRIPTION "TrapAuthFailure not implemented in 6.2.x." -- ********************* ************ ************ *************** *** SUPPORTS CTRON-LFAP-MIB INCLUDES { lfapConfGroupV40 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-POLICY-MIB INCLUDES { polGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CONFIG-MIB INCLUDES { configGroup20 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-HARDWARE-MIB INCLUDES { hwConfGroupV30 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-SERVICE-STATUS-MIB INCLUDES { ssConfGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CAPACITY-MIB INCLUDES { capConfGroupV10 } -- ********************* ************ ************ *************** *** SUPPORTS DOCS-IF-MIB INCLUDES { docsIfBasicGroup, docsIfCmtsGroup } VARIATION docsIfQosProfMaxTxBurst ACCESS read-write DESCRIPTION "This variable returns the value in bits/second rather than mini-slots because this is the expected type by Cablelabs." -- ********************* ************ ************ *************** *** SUPPORTS DOCS-BPI-MIB INCLUDES { docsBpiCmtsGroup } VARIATION docsBpiCmtsDefaultAuthLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsDefaultTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsAuthCmLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsAuthCmGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." VARIATION docsBpiCmtsTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsTEKGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." -- ********************* ************ ************ *************** *** SUPPORTS RIVERSTONE-STP-MIB INCLUDES { rsStpBaseGroup } VARIATION rsStpStatus ACCESS not-implemented DESCRIPTION "STP cannot be disabled globally on RS devices" ::= { rsCapability 2 } rs63x AGENT-CAPABILITIES PRODUCT-RELEASE "6.3.x" STATUS current DESCRIPTION "Firmware Release 6.3.x for Riverstone RS RapidOS product line. The firmware supports channelized T3/E3 card in release 6.3" REFERENCE "http://www.riverstonenet.com/products" -- RFC 1907 SUPPORTS SNMPv2-MIB INCLUDES { systemGroup, snmpGroup, snmpBasicNotificationsGroup, -- snmpSetGroup is not implemented, but is needed for SNMPv2-MIB compliance -- non mandatory groups snmpCommunityGroup, -- deprecated/obsolete support snmpObsoleteGroup } -- ********************* ************ ************ *************** *** -- RFC 2358 SUPPORTS EtherLike-MIB INCLUDES { etherStats100MbsGroup } -- ********************* ************ ************ *************** *** -- RFC 2233 SUPPORTS IF-MIB INCLUDES { ifGeneralInformationGroup, ifStackGroup2, ifCounterDiscontinuityGroup, -- non mandatory groups ifFixedLengthGroup, ifHCFixedLengthGroup, ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup, ifRcvAddressGroup, -- deprecated/obsolete support ifOldObjectsGroup } VARIATION ifAlias ACCESS read-only DESCRIPTION "ifAlias is guarenteed to be unique across reboots. It takes the form Type : instance info for example: ifAlias.49 = IP interface: to-sc-BGPfeed or ifAlias.42 = VLAN: test1 or ifAlias.35 = Physical port: et.14.5" VARIATION ifAdminStatus ACCESS read-only DESCRIPTION "For ifTypes corresponding to VLANs this object is read only." VARIATION ifLinkUpDownTrapEnable ACCESS read-only DESCRIPTION "For all ifTypes where ifConnectorPresent is not TRUE." VARIATION ifStackStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change relationships." -- ********************* ************ ************ *************** *** -- RFC 2011 SUPPORTS IP-MIB INCLUDES { ipGroup, icmpGroup } VARIATION ipDefaultTTL ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change default ttl." -- ********************* ************ ************ *************** *** -- RFC 2096 SUPPORTS IP-FORWARD-MIB INCLUDES { ipForwardCidrRouteGroup } VARIATION ipCidrRouteIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteInfo ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteNextHopAS ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." -- ********************* ************ ************ *************** *** -- RFC 2013 SUPPORTS UDP-MIB INCLUDES { udpGroup } -- ********************* ************ ************ *************** *** -- RFC 2012 SUPPORTS TCP-MIB INCLUDES { tcpGroup } VARIATION tcpConnState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to kill tcp sessions." -- ********************* ************ ************ *************** *** -- RFC 1657 -- SUPPORTS BGP4-MIB -- INCLUDES { -- This is an smiv1 mib, all objects read only. Specify in device config file to enable this mib. -- } -- ********************* ************ ************ *************** *** -- RFC 1850 -- Specify in device config file to enable this mib. SUPPORTS OSPF-MIB INCLUDES { ospfBasicGroup, ospfAreaGroup, ospfStubAreaGroup, ospfIfGroup, ospfIfMetricGroup, ospfVirtIfGroup, ospfNbrGroup, ospfVirtNbrGroup, ospfAreaAggregateGroup } VARIATION ospfRouterId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set router id." VARIATION ospfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf state." VARIATION ospfTOSSupport ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf TOS support." VARIATION ospfExtLsdbLimit ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Lsdb Limit." VARIATION ospfMulticastExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf multicast extensions." VARIATION ospfExitOverflowInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf exit overflow interval." VARIATION ospfDemandExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf demand extensions." VARIATION ospfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf authorisation types." VARIATION ospfImportAsExtern ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Import AS external routes." VARIATION ospfAreaSummary ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area summary importation." VARIATION ospfAreaStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ospf areas." VARIATION ospfStubMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area stub metric." VARIATION ospfStubStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete stub areas." VARIATION ospfStubMetricType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf stub metric type." VARIATION ospfAreaRangeMask ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area range mask." VARIATION ospfAreaRangeStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ranges." VARIATION ospfAreaRangeEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set area range effect." VARIATION ospfHostMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set host metric." VARIATION ospfHostStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete hosts." VARIATION ospfIfAreaId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface area id." VARIATION ospfIfType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface type." VARIATION ospfIfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface admin status." VARIATION ospfIfRtrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface router priority." VARIATION ospfIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface transit delay." VARIATION ospfIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface retransmission interval." VARIATION ospfIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set hello interval." VARIATION ospfIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set dead interval." VARIATION ospfIfPollInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set poll interval." VARIATION ospfIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface auth key." VARIATION ospfIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete interfaces." VARIATION ospfIfMulticastForwarding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set multicast fwd." VARIATION ospfIfDemand ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this attribute." VARIATION ospfIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfIfMetricValue ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbmaNbrStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." SUPPORTS OSPF-TRAP-MIB INCLUDES { ospfTrapControlGroup } -- ********************* ************ ************ *************** *** -- RFC 1724 -- Specify in device config file to enable this mib. SUPPORTS RIPv2-MIB INCLUDES { rip2GlobalGroup, rip2IfStatGroup, rip2IfConfGroup, rip2PeerGroup } VARIATION rip2IfStatStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDomain ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSend ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfReceive ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDefaultMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSrcAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1493 -- SUPPORTS BRIDGE-MIB -- INCLUDES { -- smiv1 mib -- } -- ********************* ************ ************ *************** *** -- RFC 2674 SUPPORTS Q-BRIDGE-MIB INCLUDES { qBridgeBaseGroup, qBridgeVlanGroup, qBridgeVlanStaticGroup, qBridgePortGroup, qBridgeFdbUnicastGroup, qBridgeServiceRequirementsGroup } -- note: qBridgeFdbMulticastGroup, mandatory, but not implemented in 6.3.x VARIATION dot1qGvrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "Firmware Version 6.3.x does not support GVRP/GARP." VARIATION dot1qForwardAllStaticPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardAllForbiddenPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardUnregisteredStaticPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qForwardUnregisteredForbiddenPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticUnicastAllowedToGoTo ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticUnicastStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastStaticEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastForbiddenEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qStaticMulticastStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticName ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanForbiddenEgressPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticUntaggedPorts ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qVlanStaticRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qPvid ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1qPortAcceptableFrameTypes ACCESS read-only DEFVAL { admitAll } DESCRIPTION "RapidOS firmware 6.3.x does not support admitOnlyVlanTagged option." VARIATION dot1qPortIngressFiltering ACCESS read-only DEFVAL { true } DESCRIPTION "RapidOS firmware 6.3.x does not support false option per port." VARIATION dot1qPortGvrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "GVRP/GARP not supported in firmware 6.3.x." -- ********************* ************ ************ *************** *** -- RFC 2674 SUPPORTS P-BRIDGE-MIB INCLUDES { pBridgeExtCapGroup, pBridgeDevicePriorityGroup, pBridgeDefaultPriorityGroup, pBridgePriorityGroup, pBridgeHCPortGroup } VARIATION dot1dTrafficClassesEnabled ACCESS read-only DEFVAL { true } DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.3.x release." VARIATION dot1dGmrpStatus ACCESS read-only DEFVAL { disabled } DESCRIPTION "Not supported in release 6.3.x." VARIATION dot1dPortDefaultUserPriority ACCESS read-only DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.3.x release." VARIATION dot1dRegenUserPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dot1dTrafficClass ACCESS read-only DESCRIPTION "RapidOS Firmware uses fixed traffic categorization per port in 6.3.x release." -- ********************* ************ ************ *************** *** -- RFC 2115 SUPPORTS FRAME-RELAY-DTE-MIB INCLUDES { frPortGroup, frCircuitGroup, frErrGroup, frTrapGroup } VARIATION frDlcmiState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddressLen ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiPollingInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiFullEnquiryInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiErrorThreshold ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMonitoredEvents ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMaxSupportedVCs ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete dlcmi's." VARIATION frCircuitState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitCommittedBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitExcessBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitThroughput ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitLogicalIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1471 -- SUPPORTS PPP-LCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1472 -- SUPPORTS PPP-SEC-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1473 -- SUPPORTS PPP-IP-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1474 -- SUPPORTS PPP-BRIDGE-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 2494 SUPPORTS DS0-MIB INCLUDES { ds0ConfigGroup } -- ********************* ************ ************ *************** *** -- RFC 2494 SUPPORTS DS0BUNDLE-MIB INCLUDES { ds0BundleConfigGroup } -- ********************* ************ ************ *************** *** -- RFC 2495 SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup, ds1NearEndOptionalConfigGroup, ds1ChanMappingGroup } VARIATION dsx1LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SignalMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Fdl ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Channelization ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 2496 SUPPORTS DS3-MIB INCLUDES { ds3NearEndConfigGroup, ds3NearEndStatisticsGroup, ds3NearEndOptionalConfigGroup } VARIATION dsx3LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3Channelization ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3Ds1ForRemoteLoop ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1595 SUPPORTS SONET-MIB INCLUDES { sonetMediumStuff, sonetSectionStuff, sonetLineStuff, sonetFarEndLineStuff, sonetPathStuff, sonetFarEndPathStuff } -- ATM OC3 line cards with modular physical port (MODPHY) have above instrumentation -- POS OC3/12 line cards do not yet support the SONET-MIB -- ********************* ************ ************ *************** *** -- RFC 1695 SUPPORTS ATM-MIB INCLUDES { atmInterfaceConfGroup, atmTrafficDescrGroup, atmInterfaceDs3PlcpGroup, atmInterfaceTCGroup, atmVccTerminationGroup, aal5VccGroup } VARIATION atmInterfaceMaxVpcs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxVccs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVpiBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVciBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceIlmiVpi ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceIlmiVci ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceMyNeighborIpAddress ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceMyNeighborIfName ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmTrafficDescrParam1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficQoSClass ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrRowStatus ACCESS not-implemented DESCRIPTION "Table is read-only" VARIATION atmInterfaceDs3PlcpSEFSs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpUASs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceOCDEvents ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceTCAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVccAalType ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "This object is not settable" -- ********************* ************ ************ *************** *** -- RFC 2618 SUPPORTS RADIUS-AUTH-CLIENT-MIB INCLUDES { radiusAuthClientMIBGroup } -- ********************* ************ ************ *************** *** -- RFC 1757/2819 SUPPORTS RMON-MIB INCLUDES { rmonEtherStatsGroup, rmonHistoryControlGroup, rmonEthernetHistoryGroup, rmonAlarmGroup, rmonHostGroup, -- requires flow bridging hardware mode enabled rmonHostTopNGroup, rmonMatrixGroup, -- requires flow bridging hardware mode enabled rmonFilterGroup, rmonPacketCaptureGroup, rmonEventGroup, rmonNotificationGroup } -- ********************* ************ ************ *************** *** -- RFC 2021 SUPPORTS RMON2-MIB INCLUDES { protocolDirectoryGroup, protocolDistributionGroup, addressMapGroup, nlHostGroup, nlMatrixGroup, alHostGroup, alMatrixGroup, usrHistoryGroup, probeInformationGroup, probeConfigurationGroup, rmon1EthernetEnhancementGroup -- rmon1EnhancementGroup supported except for filterProtocolDirDataLocalIndex, -- filterProtocolDirLocalIndex } VARIATION filterProtocolDirDataLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in this firmware version " VARIATION filterProtocolDirLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in this firmware version " -- NOTE: Sets to this mib are not persistent. RMON configuration -- may be done via CLI for persistence -- ********************* ************ ************ *************** *** -- From ietf vrrp mib Draft #9 SUPPORTS VRRP-MIB INCLUDES { vrrpOperGroup, vrrpStatsGroup, vrrpTrapGroup, vrrpNotificationGroup } VARIATION vrrpOperAdminState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPrimaryIpAddr ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAdvertisementInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPreemptMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperProtocol ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpAssoIpAddrRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpTrapAuthFailure ACCESS not-implemented DESCRIPTION "TrapAuthFailure not implemented in this firmware version" -- ********************* ************ ************ *************** *** SUPPORTS CTRON-LFAP-MIB INCLUDES { lfapConfGroupV40 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-POLICY-MIB INCLUDES { polGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CONFIG-MIB INCLUDES { configGroup20 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-HARDWARE-MIB INCLUDES { hwConfGroupV30 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-SERVICE-STATUS-MIB INCLUDES { ssConfGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CAPACITY-MIB INCLUDES { capConfGroupV10 } -- ********************* ************ ************ *************** *** SUPPORTS DOCS-IF-MIB INCLUDES { docsIfBasicGroup, docsIfCmtsGroup } VARIATION docsIfQosProfMaxTxBurst ACCESS read-write DESCRIPTION "This variable returns the value in bits/second rather than mini-slots because this is the expected type by Cablelabs." -- ********************* ************ ************ *************** *** SUPPORTS DOCS-BPI-MIB INCLUDES { docsBpiCmtsGroup } VARIATION docsBpiCmtsDefaultAuthLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsDefaultTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsAuthCmLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsAuthCmGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." VARIATION docsBpiCmtsTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsTEKGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." -- ********************* ************ ************ *************** *** SUPPORTS RIVERSTONE-STP-MIB INCLUDES { rsStpBaseGroup } VARIATION rsStpStatus ACCESS not-implemented DESCRIPTION "STP cannot be disabled globally on RS devices" ::= { rsCapability 3 } rs70x AGENT-CAPABILITIES PRODUCT-RELEASE "7.0.x" STATUS current DESCRIPTION "Firmware Release 7.0.x for Riverstone RS RapidOS product line. The firmware supports RS 38000 in this release. New software features include rate limiting enhancements and stackable VLANs. New MIBs include RFC 2674 P/Q Bridge MIB SETs and IEEE LAG MIB" REFERENCE "http://www.riverstonenet.com/products" -- RFC 1907 SUPPORTS SNMPv2-MIB INCLUDES { systemGroup, snmpGroup, snmpBasicNotificationsGroup, -- snmpSetGroup is not implemented, but is needed for SNMPv2-MIB compliance -- non mandatory groups snmpCommunityGroup, -- deprecated/obsolete support snmpObsoleteGroup } -- ********************* ************ ************ *************** *** -- RFC 2358 SUPPORTS EtherLike-MIB INCLUDES { etherStats100MbsGroup } -- ********************* ************ ************ *************** *** -- RFC 2233 SUPPORTS IF-MIB INCLUDES { ifGeneralInformationGroup, ifStackGroup2, ifCounterDiscontinuityGroup, -- non mandatory groups ifFixedLengthGroup, ifHCFixedLengthGroup, ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup, ifRcvAddressGroup, -- deprecated/obsolete support ifOldObjectsGroup } VARIATION ifAlias ACCESS read-only DESCRIPTION "ifAlias is guarenteed to be unique across reboots. It takes the form Type : instance info for example: ifAlias.49 = IP interface: to-sc-BGPfeed or ifAlias.42 = VLAN: test1 or ifAlias.35 = Physical port: et.14.5" VARIATION ifAdminStatus ACCESS read-only DESCRIPTION "For ifTypes corresponding to VLANs this object is read only." VARIATION ifLinkUpDownTrapEnable ACCESS read-only DESCRIPTION "For all ifTypes where ifConnectorPresent is not TRUE." VARIATION ifStackStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change relationships." -- ********************* ************ ************ *************** *** -- RFC 2011 SUPPORTS IP-MIB INCLUDES { ipGroup, icmpGroup } VARIATION ipDefaultTTL ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change default ttl." -- ********************* ************ ************ *************** *** -- RFC 2096 SUPPORTS IP-FORWARD-MIB INCLUDES { ipForwardCidrRouteGroup } VARIATION ipCidrRouteIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteInfo ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteNextHopAS ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." -- ********************* ************ ************ *************** *** -- RFC 2013 SUPPORTS UDP-MIB INCLUDES { udpGroup } -- ********************* ************ ************ *************** *** -- RFC 2012 SUPPORTS TCP-MIB INCLUDES { tcpGroup } VARIATION tcpConnState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to kill tcp sessions." -- ********************* ************ ************ *************** *** -- RFC 1657 -- SUPPORTS BGP4-MIB -- INCLUDES { -- This is an smiv1 mib, all objects read only. Specify in device config file to enable this mib. -- } -- ********************* ************ ************ *************** *** -- RFC 1850 -- Specify in device config file to enable this mib. SUPPORTS OSPF-MIB INCLUDES { ospfBasicGroup, ospfAreaGroup, ospfStubAreaGroup, ospfIfGroup, ospfIfMetricGroup, ospfVirtIfGroup, ospfNbrGroup, ospfVirtNbrGroup, ospfAreaAggregateGroup } VARIATION ospfRouterId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set router id." VARIATION ospfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf state." VARIATION ospfTOSSupport ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf TOS support." VARIATION ospfExtLsdbLimit ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Lsdb Limit." VARIATION ospfMulticastExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf multicast extensions." VARIATION ospfExitOverflowInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf exit overflow interval." VARIATION ospfDemandExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf demand extensions." VARIATION ospfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf authorisation types." VARIATION ospfImportAsExtern ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Import AS external routes." VARIATION ospfAreaSummary ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area summary importation." VARIATION ospfAreaStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ospf areas." VARIATION ospfStubMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area stub metric." VARIATION ospfStubStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete stub areas." VARIATION ospfStubMetricType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf stub metric type." VARIATION ospfAreaRangeMask ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area range mask." VARIATION ospfAreaRangeStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ranges." VARIATION ospfAreaRangeEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set area range effect." VARIATION ospfHostMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set host metric." VARIATION ospfHostStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete hosts." VARIATION ospfIfAreaId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface area id." VARIATION ospfIfType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface type." VARIATION ospfIfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface admin status." VARIATION ospfIfRtrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface router priority." VARIATION ospfIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface transit delay." VARIATION ospfIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface retransmission interval." VARIATION ospfIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set hello interval." VARIATION ospfIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set dead interval." VARIATION ospfIfPollInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set poll interval." VARIATION ospfIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface auth key." VARIATION ospfIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete interfaces." VARIATION ospfIfMulticastForwarding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set multicast fwd." VARIATION ospfIfDemand ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this attribute." VARIATION ospfIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfIfMetricValue ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbmaNbrStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." SUPPORTS OSPF-TRAP-MIB INCLUDES { ospfTrapControlGroup } -- ********************* ************ ************ *************** *** -- RFC 1724 -- Specify in device config file to enable this mib. SUPPORTS RIPv2-MIB INCLUDES { rip2GlobalGroup, rip2IfStatGroup, rip2IfConfGroup, rip2PeerGroup } VARIATION rip2IfStatStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDomain ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSend ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfReceive ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDefaultMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSrcAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1493 -- SUPPORTS BRIDGE-MIB -- INCLUDES { -- smiv1 mib -- } -- ********************* ************ ************ *************** *** -- RFC 2674 -- Updated 09/20/00 SUPPORTS Q-BRIDGE-MIB INCLUDES { qBridgeBaseGroup, qBridgeVlanGroup, qBridgeVlanStaticGroup, qBridgePortGroup, qBridgeFdbUnicastGroup, qBridgeFdbMulticastGroup } --qBridgeStaticVlanTable --Implicit Vlans are not accounted by SNMP. --Only 10 Non Active rows can be present in the temp table . If the user --tries to create more than 10 Non Active rows, BAD-VALUE will be returned. --Vlan name has to be specified when creating a vlan, apart from the vlan id. --This is a limitation of the RS family (RFC does not ask for the vlan name.) VARIATION dot1qVlanStaticUntaggedPorts ACCESS read-only DESCRIPTION "No hardware support" VARIATION dot1qVlanStaticEgressPorts ACCESS read-write DESCRIPTION "Apart from permanent entries , non permanent entries ( in the active config and not in the startup config) will also be displayed." VARIATION dot1qPvid ACCESS read-write DESCRIPTION "For Trunk-Port, PVID cannot be set. Trunk ports can be in more than one vlan (apart from being in default vlan). Get reports the default vlan ID." VARIATION dot1qPortGvrpStatus ACCESS read-only DESCRIPTION "CLI is used to set this" -- ********************* ************ ************ *************** *** -- RFC 2674 -- Update 09/26/00 SUPPORTS P-BRIDGE-MIB INCLUDES { pBridgeExtCapGroup, pBridgeDevicePriorityGroup, pBridgeDefaultPriorityGroup, pBridgePriorityGroup, pBridgePortGarpGroup } -- pBridgeExtCapGroup: dot1dDeviceCapabilities :: -- dot1dExtendedFilteringServices ,dot1qConfigurablePvidTagging , -- dot1qSVLCapable,dot1qHybridCapable not supported. VARIATION dot1dTrafficClassesEnabled ACCESS read-only DESCRIPTION "This is not settable through SNMP. However this can be set using CLI by mapping all 1p priority levels to the same traffic class." -- pBridgeDefaultPriorityGroup: dot1dPortDefaultUserPriority If the user -- configures default priority on a port and later -- configures a priority for a MAC / VLAN pair -- using CLI, CLI would report a conflict. -- When this variable is set through snmp, the -- name used for the qos command would be -- "snmp-priority-#portnum". This would be the -- case, even if a priority was configured -- through the cli (using qos set l2 command) -- with a different name (say priority-#portnum), -- and then modified through snmp. VARIATION dot1dPortNumTrafficClasses ACCESS read-only DESCRIPTION "This value is not settable. Setting this value is optional only." VARIATION dot1dPortGarpJoinTime ACCESS read-only DESCRIPTION "This is not settable." VARIATION dot1dPortGarpLeaveTime ACCESS read-only DESCRIPTION "This is not settable." VARIATION dot1dPortGarpLeaveAllTime ACCESS read-only DESCRIPTION "This is not settable." -- ********************* ************ ************ *************** *** -- RFC 2115 SUPPORTS FRAME-RELAY-DTE-MIB INCLUDES { frPortGroup, frCircuitGroup, frErrGroup, frTrapGroup } VARIATION frDlcmiState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddressLen ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiPollingInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiFullEnquiryInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiErrorThreshold ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMonitoredEvents ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMaxSupportedVCs ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete dlcmi's." VARIATION frCircuitState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitCommittedBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitExcessBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitThroughput ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitLogicalIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1471 -- SUPPORTS PPP-LCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1472 -- SUPPORTS PPP-SEC-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1473 -- SUPPORTS PPP-IP-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1474 -- SUPPORTS PPP-BRIDGE-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 2494 SUPPORTS DS0-MIB INCLUDES { ds0ConfigGroup } -- ********************* ************ ************ *************** *** -- RFC 2494 SUPPORTS DS0BUNDLE-MIB INCLUDES { ds0BundleConfigGroup } -- ********************* ************ ************ *************** *** -- RFC 2495 SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup, ds1NearEndOptionalConfigGroup, ds1ChanMappingGroup } VARIATION dsx1LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SignalMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Fdl ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Channelization ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 2496 SUPPORTS DS3-MIB INCLUDES { ds3NearEndConfigGroup, ds3NearEndStatisticsGroup, ds3NearEndOptionalConfigGroup } VARIATION dsx3LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3Channelization ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3Ds1ForRemoteLoop ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1595 SUPPORTS SONET-MIB INCLUDES { sonetMediumStuff, sonetSectionStuff, sonetLineStuff, sonetFarEndLineStuff, sonetPathStuff, sonetFarEndPathStuff } -- ATM OC3 line cards with modular physical port (MODPHY) have above instrumentation -- POS OC3/12 line cards do not yet support the SONET-MIB -- ********************* ************ ************ *************** *** -- RFC 1695 SUPPORTS ATM-MIB INCLUDES { atmInterfaceConfGroup, atmTrafficDescrGroup, atmInterfaceDs3PlcpGroup, atmInterfaceTCGroup, atmVccTerminationGroup, aal5VccGroup } VARIATION atmInterfaceMaxVpcs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxVccs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVpiBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVciBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceIlmiVpi ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceIlmiVci ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceMyNeighborIpAddress ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceMyNeighborIfName ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmTrafficDescrParam1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficQoSClass ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrRowStatus ACCESS not-implemented DESCRIPTION "Table is read-only" VARIATION atmInterfaceDs3PlcpSEFSs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpUASs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceOCDEvents ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceTCAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVccAalType ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "This object is not settable" -- ********************* ************ ************ *************** *** -- RFC 2618 SUPPORTS RADIUS-AUTH-CLIENT-MIB INCLUDES { radiusAuthClientMIBGroup } -- ********************* ************ ************ *************** *** -- RFC 1757/2819 SUPPORTS RMON-MIB INCLUDES { rmonEtherStatsGroup, rmonHistoryControlGroup, rmonEthernetHistoryGroup, rmonAlarmGroup, rmonHostGroup, -- requires flow bridging hardware mode enabled rmonHostTopNGroup, rmonMatrixGroup, -- requires flow bridging hardware mode enabled rmonFilterGroup, rmonPacketCaptureGroup, rmonEventGroup, rmonNotificationGroup } -- ********************* ************ ************ *************** *** -- RFC 2021 SUPPORTS RMON2-MIB INCLUDES { protocolDirectoryGroup, protocolDistributionGroup, addressMapGroup, nlHostGroup, nlMatrixGroup, alHostGroup, alMatrixGroup, usrHistoryGroup, probeInformationGroup, probeConfigurationGroup, rmon1EthernetEnhancementGroup -- rmon1EnhancementGroup supported except for filterProtocolDirDataLocalIndex, -- filterProtocolDirLocalIndex } VARIATION filterProtocolDirDataLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in this firmware version " VARIATION filterProtocolDirLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in this firmware version " -- NOTE: Sets to this mib are not persistent. RMON configuration -- may be done via CLI for persistence -- ********************* ************ ************ *************** *** -- From ietf vrrp mib Draft #9 SUPPORTS VRRP-MIB INCLUDES { vrrpOperGroup, vrrpStatsGroup, vrrpTrapGroup, vrrpNotificationGroup } VARIATION vrrpOperAdminState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPrimaryIpAddr ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAdvertisementInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPreemptMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperProtocol ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpAssoIpAddrRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpTrapAuthFailure ACCESS not-implemented DESCRIPTION "TrapAuthFailure not implemented in this firmware version" -- ********************* ************ ************ *************** *** SUPPORTS CTRON-LFAP-MIB INCLUDES { lfapConfGroupV40 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-POLICY-MIB INCLUDES { polGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CONFIG-MIB INCLUDES { configGroup20 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-HARDWARE-MIB INCLUDES { hwConfGroupV30 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-SERVICE-STATUS-MIB INCLUDES { ssConfGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CAPACITY-MIB INCLUDES { capConfGroupV10 } -- ********************* ************ ************ *************** *** SUPPORTS DOCS-IF-MIB INCLUDES { docsIfBasicGroup, docsIfCmtsGroup } VARIATION docsIfQosProfMaxTxBurst ACCESS read-write DESCRIPTION "This variable returns the value in bits/second rather than mini-slots because this is the expected type by Cablelabs." -- ********************* ************ ************ *************** *** SUPPORTS DOCS-BPI-MIB INCLUDES { docsBpiCmtsGroup } VARIATION docsBpiCmtsDefaultAuthLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsDefaultTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsAuthCmLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsAuthCmGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." VARIATION docsBpiCmtsTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsTEKGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." -- ********************* ************ ************ *************** *** SUPPORTS RIVERSTONE-STP-MIB INCLUDES { rsStpBaseGroup } VARIATION rsStpStatus ACCESS not-implemented DESCRIPTION "STP cannot be disabled globally on RS devices" -- ********************* ************ ************ *************** *** -- IEEE 802.3ad , LAG MIB SUPPORTS LAG-MIB INCLUDES { dot3adAggGroup, dot3adAggPortGroup, dot3adTablesLastChangedGroup, dot3adAggPortListGroup, dot3adAggPortStatsGroup, dot3adAggPortDebugGroup } VARIATION dot3adAggPartnerSystemPriority ACCESS read-only DESCRIPTION "This object is not aggregator specific" VARIATION dot3adAggCollectorMaxDelay ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminSystemPriority ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminSystemID ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminKey ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminPort ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminPortPriority ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adTablesLastChanged ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugRxState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugLastRxTime ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugMuxState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugMuxReason ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugActorChurnState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugPartnerChurnState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugActorChurnCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugPartnerChurnCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugActorSyncTransitionCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugPartnerSyncTransitionCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugActorChangeCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugPartnerChangeCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" -- ********************* ************ ************ *************** *** SUPPORTS CISCO-BGP-POLICY-ACCOUNTING-MIB INCLUDES { cbpAcctTableGroup } -- ********************* ************ ************ *************** *** ::= { rsCapability 4 } rs80x AGENT-CAPABILITIES PRODUCT-RELEASE "8.0.x" STATUS current DESCRIPTION "Firmware Release 8.0.x for Riverstone RS RapidOS product line. The firmware supports RS 16000 in this release. It also supports MPLS hardware and software. Other software features include SLR, Unnumbered Interfaces, per VLAN statistics and Hot CM failover (phase 1). New MIBs include VLAN statistics in RFC 2674 Q Bridge MIB and rstone-atm-mib for learning MAC addresses on a per VC basis." REFERENCE "http://www.riverstonenet.com/products" -- RFC 1907 SUPPORTS SNMPv2-MIB INCLUDES { systemGroup, snmpGroup, snmpBasicNotificationsGroup, -- snmpSetGroup is not implemented, but is needed for SNMPv2-MIB compliance -- non mandatory groups snmpCommunityGroup, -- deprecated/obsolete support snmpObsoleteGroup } -- ********************* ************ ************ *************** *** -- RFC 2358 SUPPORTS EtherLike-MIB INCLUDES { etherStats100MbsGroup } -- ********************* ************ ************ *************** *** -- RFC 2233 SUPPORTS IF-MIB INCLUDES { ifGeneralInformationGroup, ifStackGroup2, ifCounterDiscontinuityGroup, -- non mandatory groups ifFixedLengthGroup, ifHCFixedLengthGroup, ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup, ifRcvAddressGroup, -- deprecated/obsolete support ifOldObjectsGroup } VARIATION ifAlias ACCESS read-only DESCRIPTION "ifAlias is guarenteed to be unique across reboots. It takes the form Type : instance info for example: ifAlias.49 = IP interface: to-sc-BGPfeed or ifAlias.42 = VLAN: test1 or ifAlias.35 = Physical port: et.14.5" VARIATION ifAdminStatus ACCESS read-only DESCRIPTION "For ifTypes corresponding to VLANs this object is read only." VARIATION ifLinkUpDownTrapEnable ACCESS read-only DESCRIPTION "For all ifTypes where ifConnectorPresent is not TRUE." VARIATION ifStackStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change relationships." -- ********************* ************ ************ *************** *** -- RFC 2011 SUPPORTS IP-MIB INCLUDES { ipGroup, icmpGroup } VARIATION ipDefaultTTL ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to change default ttl." -- ********************* ************ ************ *************** *** -- RFC 2096 SUPPORTS IP-FORWARD-MIB INCLUDES { ipForwardCidrRouteGroup } VARIATION ipCidrRouteIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteInfo ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteNextHopAS ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteMetric5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." VARIATION ipCidrRouteStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to update Forwarding Information Base/FIB." -- ********************* ************ ************ *************** *** -- RFC 2013 SUPPORTS UDP-MIB INCLUDES { udpGroup } -- ********************* ************ ************ *************** *** -- RFC 2012 SUPPORTS TCP-MIB INCLUDES { tcpGroup } VARIATION tcpConnState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to kill tcp sessions." -- ********************* ************ ************ *************** *** -- RFC 1657 -- SUPPORTS BGP4-MIB -- INCLUDES { -- This is an smiv1 mib, all objects read only. Specify in device config file to enable this mib. -- } -- ********************* ************ ************ *************** *** -- RFC 1850 -- Specify in device config file to enable this mib. SUPPORTS OSPF-MIB INCLUDES { ospfBasicGroup, ospfAreaGroup, ospfStubAreaGroup, ospfIfGroup, ospfIfMetricGroup, ospfVirtIfGroup, ospfNbrGroup, ospfVirtNbrGroup, ospfAreaAggregateGroup } VARIATION ospfRouterId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set router id." VARIATION ospfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf state." VARIATION ospfTOSSupport ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf TOS support." VARIATION ospfExtLsdbLimit ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Lsdb Limit." VARIATION ospfMulticastExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf multicast extensions." VARIATION ospfExitOverflowInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf exit overflow interval." VARIATION ospfDemandExtensions ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf demand extensions." VARIATION ospfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf authorisation types." VARIATION ospfImportAsExtern ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf Import AS external routes." VARIATION ospfAreaSummary ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area summary importation." VARIATION ospfAreaStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ospf areas." VARIATION ospfStubMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area stub metric." VARIATION ospfStubStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete stub areas." VARIATION ospfStubMetricType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf stub metric type." VARIATION ospfAreaRangeMask ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set ospf area range mask." VARIATION ospfAreaRangeStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete ranges." VARIATION ospfAreaRangeEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set area range effect." VARIATION ospfHostMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set host metric." VARIATION ospfHostStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete hosts." VARIATION ospfIfAreaId ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface area id." VARIATION ospfIfType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface type." VARIATION ospfIfAdminStat ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set Interface admin status." VARIATION ospfIfRtrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface router priority." VARIATION ospfIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface transit delay." VARIATION ospfIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface retransmission interval." VARIATION ospfIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set hello interval." VARIATION ospfIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set dead interval." VARIATION ospfIfPollInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set poll interval." VARIATION ospfIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set interface auth key." VARIATION ospfIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete interfaces." VARIATION ospfIfMulticastForwarding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set multicast fwd." VARIATION ospfIfDemand ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this attribute." VARIATION ospfIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfIfMetricValue ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfTransitDelay ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRetransInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfHelloInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfRtrDeadInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfVirtIfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbrPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfNbmaNbrStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION ospfAreaAggregateEffect ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." SUPPORTS OSPF-TRAP-MIB INCLUDES { ospfTrapControlGroup } -- ********************* ************ ************ *************** *** -- RFC 1724 -- Specify in device config file to enable this mib. SUPPORTS RIPv2-MIB INCLUDES { rip2GlobalGroup, rip2IfStatGroup, rip2IfConfGroup, rip2PeerGroup } VARIATION rip2IfStatStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDomain ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSend ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfReceive ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfDefaultMetric ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION rip2IfConfSrcAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1493 -- SUPPORTS BRIDGE-MIB -- INCLUDES { -- smiv1 mib -- } -- ********************* ************ ************ *************** *** -- RFC 2674 -- Updated 09/20/00 SUPPORTS Q-BRIDGE-MIB INCLUDES { qBridgeBaseGroup, qBridgeVlanGroup, qBridgeVlanStaticGroup, qBridgePortGroup, qBridgeFdbUnicastGroup, qBridgeFdbMulticastGroup } --qBridgeStaticVlanTable --Implicit Vlans are not accounted by SNMP. --Only 10 Non Active rows can be present in the temp table . If the user --tries to create more than 10 Non Active rows, BAD-VALUE will be returned. --Vlan name has to be specified when creating a vlan, apart from the vlan id. --This is a limitation of the RS family (RFC does not ask for the vlan name.) VARIATION dot1qVlanStaticUntaggedPorts ACCESS read-only DESCRIPTION "No hardware support" VARIATION dot1qVlanStaticEgressPorts ACCESS read-write DESCRIPTION "Apart from permanent entries , non permanent entries ( in the active config and not in the startup config) will also be displayed." VARIATION dot1qPvid ACCESS read-write DESCRIPTION "For Trunk-Port, PVID cannot be set. Trunk ports can be in more than one vlan (apart from being in default vlan). Get reports the default vlan ID." VARIATION dot1qPortGvrpStatus ACCESS read-only DESCRIPTION "CLI is used to set this" VARIATION dot1qTpVlanPortInFrames DESCRIPTION "For this object to exist, per-VLAN statistics must first be enabled through the CLI for each port to be monitored. SmartTRUNKs are currently not supported." VARIATION dot1qTpVlanPortOutFrames DESCRIPTION "For this object to exist, per-VLAN statistics must first be enabled through the CLI for each port to be monitored. SmartTRUNKs are currently not supported. When an egress port is oversubscribed, the value of this object may be larger than the actual value, since the RS platform cannot account for packets dropped internally at this level of granularity." VARIATION dot1qTpVlanPortInDiscards DESCRIPTION "The RS platform does not support the collection of this statistic." VARIATION dot1qTpVlanPortInOverflowFrames DESCRIPTION "For this object to exist, per-VLAN statistics must first be enabled through the CLI for each port to be monitored. SmartTRUNKs are currently not supported." VARIATION dot1qTpVlanPortOutOverflowFrames DESCRIPTION "For this object to exist, per-VLAN statistics must first be enabled through the CLI for each port to be monitored. SmartTRUNKs are currently not supported. When an egress port is oversubscribed, the value of this object may be larger than the actual value, since the RS platform cannot account for packets dropped internally at this level of granularity." VARIATION dot1qTpVlanPortInOverflowDiscards DESCRIPTION "The RS platform does not support the collection of this statistic." VARIATION dot1qTpVlanPortHCInFrames DESCRIPTION "For this object to exist, per-VLAN statistics must first be enabled through the CLI for each port to be monitored. SmartTRUNKs are currently not supported." VARIATION dot1qTpVlanPortHCOutFrames DESCRIPTION "For this object to exist, per-VLAN statistics must first be enabled through the CLI for each port to be monitored. SmartTRUNKs are currently not supported. When an egress port is oversubscribed, the value of this object may be larger than the actual value, since the RS platform cannot account for packets dropped internally at this level of granularity." VARIATION dot1qTpVlanPortHCInDiscards DESCRIPTION "The RS platform does not support the collection of this statistic." -- ********************* ************ ************ *************** *** -- RFC 2674 -- Update 09/26/00 SUPPORTS P-BRIDGE-MIB INCLUDES { pBridgeExtCapGroup, pBridgeDevicePriorityGroup, pBridgeDefaultPriorityGroup, pBridgePriorityGroup, pBridgePortGarpGroup } -- pBridgeExtCapGroup: dot1dDeviceCapabilities :: -- dot1dExtendedFilteringServices ,dot1qConfigurablePvidTagging , -- dot1qSVLCapable,dot1qHybridCapable not supported. VARIATION dot1dTrafficClassesEnabled ACCESS read-only DESCRIPTION "This is not settable through SNMP. However this can be set using CLI by mapping all 1p priority levels to the same traffic class." -- pBridgeDefaultPriorityGroup: dot1dPortDefaultUserPriority If the user -- configures default priority on a port and later -- configures a priority for a MAC / VLAN pair -- using CLI, CLI would report a conflict. -- When this variable is set through snmp, the -- name used for the qos command would be -- "snmp-priority-#portnum". This would be the -- case, even if a priority was configured -- through the cli (using qos set l2 command) -- with a different name (say priority-#portnum), -- and then modified through snmp. VARIATION dot1dPortNumTrafficClasses ACCESS read-only DESCRIPTION "This value is not settable. Setting this value is optional only." VARIATION dot1dPortGarpJoinTime ACCESS read-only DESCRIPTION "This is not settable." VARIATION dot1dPortGarpLeaveTime ACCESS read-only DESCRIPTION "This is not settable." VARIATION dot1dPortGarpLeaveAllTime ACCESS read-only DESCRIPTION "This is not settable." -- ********************* ************ ************ *************** *** -- RFC 2115 SUPPORTS FRAME-RELAY-DTE-MIB INCLUDES { frPortGroup, frCircuitGroup, frErrGroup, frTrapGroup } VARIATION frDlcmiState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddress ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiAddressLen ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiPollingInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiFullEnquiryInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiErrorThreshold ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMonitoredEvents ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMaxSupportedVCs ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frDlcmiRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to create & delete dlcmi's." VARIATION frCircuitState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitCommittedBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitExcessBurst ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitThroughput ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitMulticast ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitLogicalIfIndex ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION frCircuitRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1471 -- SUPPORTS PPP-LCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1472 -- SUPPORTS PPP-SEC-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1473 -- SUPPORTS PPP-IP-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 1474 -- SUPPORTS PPP-BRIDGE-NCP-MIB -- INCLUDES { -- smiv1 mib - read only -- } -- ********************* ************ ************ *************** *** -- RFC 2494 SUPPORTS DS0-MIB INCLUDES { ds0ConfigGroup } -- ********************* ************ ************ *************** *** -- RFC 2494 SUPPORTS DS0BUNDLE-MIB INCLUDES { ds0BundleConfigGroup } -- ********************* ************ ************ *************** *** -- RFC 2495 SUPPORTS DS1-MIB INCLUDES { ds1NearEndConfigGroup, ds1NearEndStatisticsGroup, ds1NearEndOptionalConfigGroup, ds1ChanMappingGroup } VARIATION dsx1LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1SignalMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Fdl ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx1Channelization ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 2496 SUPPORTS DS3-MIB INCLUDES { ds3NearEndConfigGroup, ds3NearEndStatisticsGroup, ds3NearEndOptionalConfigGroup } VARIATION dsx3LineType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineCoding ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3SendCode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3CircuitIdentifier ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LoopbackConfig ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3TransmitClockSource ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineLength ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3LineStatusChangeTrapEnable ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3Channelization ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION dsx3Ds1ForRemoteLoop ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." -- ********************* ************ ************ *************** *** -- RFC 1595 SUPPORTS SONET-MIB INCLUDES { sonetMediumStuff, sonetSectionStuff, sonetLineStuff, sonetFarEndLineStuff, sonetPathStuff, sonetFarEndPathStuff } -- ATM OC3 line cards with modular physical port (MODPHY) have above instrumentation -- POS OC3/12 line cards do not yet support the SONET-MIB -- ********************* ************ ************ *************** *** -- RFC 1695 SUPPORTS ATM-MIB INCLUDES { atmInterfaceConfGroup, atmTrafficDescrGroup, atmInterfaceDs3PlcpGroup, atmInterfaceTCGroup, atmVccTerminationGroup, aal5VccGroup } VARIATION atmInterfaceMaxVpcs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxVccs ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVpiBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceMaxActiveVciBits ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmInterfaceIlmiVpi ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceIlmiVci ACCESS not-implemented DESCRIPTION "Device does not support Ilmi" VARIATION atmInterfaceMyNeighborIpAddress ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceMyNeighborIfName ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmTrafficDescrParam1 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam2 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam3 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam4 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrParam5 ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficQoSClass ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmTrafficDescrRowStatus ACCESS not-implemented DESCRIPTION "Table is read-only" VARIATION atmInterfaceDs3PlcpSEFSs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceDs3PlcpUASs ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceOCDEvents ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmInterfaceTCAlarmState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION atmVclAdminStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature" VARIATION atmVclReceiveTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVclTransmitTrafficDescrIndex ACCESS read-only DESCRIPTION "Memory address is used as the index, CLI is used to set this" VARIATION atmVccAalType ACCESS read-only DESCRIPTION "This object is not settable" VARIATION atmVclRowStatus ACCESS read-only DESCRIPTION "This object is not settable" -- ********************* ************ ************ *************** *** -- RFC 2618 SUPPORTS RADIUS-AUTH-CLIENT-MIB INCLUDES { radiusAuthClientMIBGroup } -- ********************* ************ ************ *************** *** -- RFC 1757/2819 SUPPORTS RMON-MIB INCLUDES { rmonEtherStatsGroup, rmonHistoryControlGroup, rmonEthernetHistoryGroup, rmonAlarmGroup, rmonHostGroup, -- requires flow bridging hardware mode enabled rmonHostTopNGroup, rmonMatrixGroup, -- requires flow bridging hardware mode enabled rmonFilterGroup, rmonPacketCaptureGroup, rmonEventGroup, rmonNotificationGroup } -- ********************* ************ ************ *************** *** -- RFC 2021 SUPPORTS RMON2-MIB INCLUDES { protocolDirectoryGroup, protocolDistributionGroup, addressMapGroup, nlHostGroup, nlMatrixGroup, alHostGroup, alMatrixGroup, usrHistoryGroup, probeInformationGroup, probeConfigurationGroup, rmon1EthernetEnhancementGroup -- rmon1EnhancementGroup supported except for filterProtocolDirDataLocalIndex, -- filterProtocolDirLocalIndex } VARIATION filterProtocolDirDataLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in this firmware version " VARIATION filterProtocolDirLocalIndex ACCESS not-implemented DESCRIPTION "Feature not available in this firmware version " -- NOTE: Sets to this mib are not persistent. RMON configuration -- may be done via CLI for persistence -- ********************* ************ ************ *************** *** -- From ietf vrrp mib Draft #9 SUPPORTS VRRP-MIB INCLUDES { vrrpOperGroup, vrrpStatsGroup, vrrpTrapGroup, vrrpNotificationGroup } VARIATION vrrpOperAdminState ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPriority ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPrimaryIpAddr ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthType ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAuthKey ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperAdvertisementInterval ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperPreemptMode ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperProtocol ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpOperRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpAssoIpAddrRowStatus ACCESS read-only DESCRIPTION "Command line interface(CLI) is used to set this feature." VARIATION vrrpTrapAuthFailure ACCESS not-implemented DESCRIPTION "TrapAuthFailure not implemented in this firmware version" -- ********************* ************ ************ *************** *** SUPPORTS CTRON-LFAP-MIB INCLUDES { lfapConfGroupV40 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-POLICY-MIB INCLUDES { polGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CONFIG-MIB INCLUDES { configGroup20 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-HARDWARE-MIB INCLUDES { hwConfGroupV30 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-SERVICE-STATUS-MIB INCLUDES { ssConfGroupV11 } -- ********************* ************ ************ *************** *** SUPPORTS CTRON-SSR-CAPACITY-MIB INCLUDES { capConfGroupV10 } -- ********************* ************ ************ *************** *** SUPPORTS DOCS-IF-MIB INCLUDES { docsIfBasicGroup, docsIfCmtsGroup } VARIATION docsIfQosProfMaxTxBurst ACCESS read-write DESCRIPTION "This variable returns the value in bits/second rather than mini-slots because this is the expected type by Cablelabs." -- ********************* ************ ************ *************** *** SUPPORTS DOCS-BPI-MIB INCLUDES { docsBpiCmtsGroup } VARIATION docsBpiCmtsDefaultAuthLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsDefaultTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsAuthCmLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 6048000." VARIATION docsBpiCmtsAuthCmGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." VARIATION docsBpiCmtsTEKLifetime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 604800." VARIATION docsBpiCmtsTEKGraceTime ACCESS read-write DESCRIPTION "For testing purposes, this variable has an increased numeric range from 1 to 1800." -- ********************* ************ ************ *************** *** SUPPORTS RIVERSTONE-STP-MIB INCLUDES { rsStpBaseGroup } VARIATION rsStpStatus ACCESS not-implemented DESCRIPTION "STP cannot be disabled globally on RS devices" -- ********************* ************ ************ *************** *** -- IEEE 802.3ad , LAG MIB SUPPORTS LAG-MIB INCLUDES { dot3adAggGroup, dot3adAggPortGroup, dot3adTablesLastChangedGroup, dot3adAggPortListGroup, dot3adAggPortStatsGroup, dot3adAggPortDebugGroup } VARIATION dot3adAggPartnerSystemPriority ACCESS read-only DESCRIPTION "This object is not aggregator specific" VARIATION dot3adAggCollectorMaxDelay ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminSystemPriority ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminSystemID ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminKey ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminPort ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adAggPortPartnerAdminPortPriority ACCESS read-only DESCRIPTION "This object is not settable" VARIATION dot3adTablesLastChanged ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugRxState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugLastRxTime ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugMuxState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugMuxReason ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugActorChurnState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugPartnerChurnState ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugActorChurnCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugPartnerChurnCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugActorSyncTransitionCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugPartnerSyncTransitionCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugActorChangeCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" VARIATION dot3adAggPortDebugPartnerChangeCount ACCESS not-implemented DESCRIPTION "Firmware does not support this" -- ********************* ************ ************ *************** *** SUPPORTS CISCO-BGP-POLICY-ACCOUNTING-MIB INCLUDES { cbpAcctTableGroup } -- ********************* ************ ************ *************** *** SUPPORTS RSTONE-ATM-MIB INCLUDES { rsAtmFdbBaseGroup } -- ********************* ************ ************ *************** *** ::= { rsCapability 5 } END