RIVERSTONE-PING-EXTENSIONS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE, OBJECT-IDENTITY,
    Unsigned32                          FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    MacAddress                          FROM SNMPv2-TC
    MODULE-COMPLIANCE,
    OBJECT-GROUP                        FROM SNMPv2-CONF
    AtmVpIdentifier, AtmVcIdentifier    FROM ATM-TC-MIB
    pingCtlOwnerIndex, pingCtlTestName  FROM DISMAN-PING-MIB
    MplsTunnelIndex                     FROM MPLS-TE-MIB
    VlanIndex                           FROM Q-BRIDGE-MIB
    riverstoneMibs			FROM RIVERSTONE-SMI-MIB
    RsContextId,
    RsDomainList,                        
    RsDirection                         FROM RIVERSTONE-TC-MIB; 

rsPingExtensionsMIB MODULE-IDENTITY
   LAST-UPDATED "200505310000Z"  -- May 31, 2005
   ORGANIZATION "Riverstone Networks, Inc"
   CONTACT-INFO "Riverstone Networks
                 Customer Service

                 Postal:
                 Riverstone Networks, Inc
                 5200 Great America Parkway
                 Santa Clara CA 95054 USA

                 PHONE:+1 408.878.6500
                 EMAIL: nms-eng@riverstonenet.com
                 WEB: http://www.riverstonenet.com"

   DESCRIPTION
       "This module extends the pingMIB defined in RFC2925."

   REVISION     "200505310000Z"
   DESCRIPTION
       "Added ping extensions for LSP-LDP OAM, LSP-RSVP OAM, (H)VPLS.
        OAM. 
        Syntax for rsPingEtherOamCtlVlanId object changed from VlanId 
        to VlanIndex."

   REVISION     "200210090000Z"
   DESCRIPTION
       "Add ping extension for ethernet OAM."

   REVISION     "200204160000Z"
   DESCRIPTION
       "Initial version of Riverstone extensions to the pingMIB.
       ATM OAM ping is the first extension."

   ::= { riverstoneMibs 55 }

-- 
-- Textual conventions
-- 

RsAtmFlowLevel ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Indicate different ATM flow levels. The level VPI (F4)
        indicates the flow is switched by VPI by the network nodes,
        The level VCI (F5) indicates the flow is switched by VPI
        and VCI."
    SYNTAX      INTEGER  {
        none(0),
        f4(4),
        f5(5)
    }

RsAtmOamFlowType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Indicates different ATM OAM loopback flow types. An OAM
        loopback can either be segment or endToEnd. A segment
        flow covers part of the circuit. Only network nodes receive
        segment flows. A segment flow cannot end at a Customer
        Premises Equipment (CPE). An endToEnd flow indicates
        the end of a circuit. It is from a network node or a CPE
        to a far point, another CPE."
    SYNTAX      INTEGER  {
        none(0),
        segment(3),
        endToEnd(4)
    }

RsAtmOamLocationID ::=  TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Indicate a location ID, which can be configured on
        each ATM switch to identify it."
    SYNTAX       OCTET STRING (SIZE (0..16))

rsPingObjects        OBJECT IDENTIFIER ::= { rsPingExtensionsMIB 1 }
rsPingConformance    OBJECT IDENTIFIER ::= { rsPingExtensionsMIB 2 }
rsPingTypes          OBJECT IDENTIFIER ::= { rsPingExtensionsMIB 3 }

rsPingAtmOamLoopback OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
        "Indicates that an implementation is using ATM OAM loopback."
    ::= { rsPingTypes 1 }

rsPingEtherOam OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
        "Indicates that an implementation is using Ethernet OAM to
         find round trip time to remote host by L2 MAC address"
    ::= { rsPingTypes 5 }

rsPingLspLdpOam OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
        "Indicates that an implementation is using LSP LDP OAM to
         find round trip time to remote host by LSP-LDP FEC."
    ::= { rsPingTypes 6 }

rsPingLspRsvpOam OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
        "Indicates that an implementation is using LSP RSVP OAM to
         find round trip time to remote host by LSP-RSVP Tunnel ID."
    ::= { rsPingTypes 7 }

rsPingHVplsOam OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION
        "Indicates that an implementation is using (H)VPLS OAM to
         find round trip time to remote host by L2 Mac address."
    ::= { rsPingTypes 8 }

rsPingAtmCtlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RsPingAtmCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Extends the ping Control Table for providing, via SNMP,
         the capability of performing ping operations at
         a remote host."
   ::= { rsPingObjects 1 }




rsPingAtmCtlEntry OBJECT-TYPE
    SYNTAX      RsPingAtmCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the rsPingAtmCtlTable.  The first index
        element pingCtlOwnerIndex isdefined in RFC2925.
        The second index pingCtlTestName is also defined in RFC2925."
    INDEX {
             pingCtlOwnerIndex,
             pingCtlTestName
          }
    ::= { rsPingAtmCtlTable 1 }

RsPingAtmCtlEntry ::=
    SEQUENCE {
        rsPingAtmCtlPort                 Unsigned32,
        rsPingAtmCtlVpi                  AtmVpIdentifier,
        rsPingAtmCtlVci                  AtmVcIdentifier,
        rsPingAtmCtlFlowType             RsAtmOamFlowType,
        rsPingAtmCtlLocationID           RsAtmOamLocationID
    }

rsPingAtmCtlPort OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This indicates the system port of the virtual circuit
        that the OAM loopback cells would go out."
    DEFVAL { 0 }

    ::= { rsPingAtmCtlEntry 1 }

rsPingAtmCtlVpi OBJECT-TYPE
    SYNTAX      AtmVpIdentifier
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This indicates the VPI of the virtual circuit
        that the OAM loopback cells would go out."
    DEFVAL { 1 }

    ::= { rsPingAtmCtlEntry 2 }

rsPingAtmCtlVci OBJECT-TYPE
    SYNTAX      AtmVcIdentifier
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This indicates the VCI of the virtual circuit
        that the OAM loopback cells would go out.
        If this circuit is switched by VPI(F4), this
        object would only take in 3 or 4 for segment or
        endToTnd respectively to indicate its flow type."
    DEFVAL { 3 }

    ::= { rsPingAtmCtlEntry 3 }

rsPingAtmCtlFlowType OBJECT-TYPE
    SYNTAX      RsAtmOamFlowType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This indicates to the switch to send ATM OAM
        segment loopback or endToEnd loopback cells.
        This object only applies when the flow level
        is F5. For F4 circuit, set the VCI to 3 for
        segment and 4 for endToEnd."
    DEFVAL { none }

    ::= { rsPingAtmCtlEntry 4 }

rsPingAtmCtlLocationID  OBJECT-TYPE
    SYNTAX      RsAtmOamLocationID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object only applies if the flow type is
        segment. Use this object to identify which ATM
        network node in the circuit would the segment
        loopback occur. The default value of all 1s
        indicate the end of the circuit. For segment
        flows, this is the last network node. For endToEnd
        flows, this is the CPE."
    DEFVAL      { "ffffffffffffffff" }

    ::= { rsPingAtmCtlEntry 5 }


rsPingEtherOamCtlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RsPingEtherOamCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Extends the ping Control Table for providing, via SNMP,
         the capability of performing ping operations at
         a remote host by L2 MAC address.

         Restrictions:

         Following objects of pingCtlEntry are not used when
         pingCtlType is of rsPingEthernetOAM.

         pingCtlTargetAddress,
         pingCtlTargetAddressType,
         pingCtlSourceAddressType,
         pingCtlSourceAddress,
         pingCtlByPassRouteTable,
         pingCtlDSField
       
         pingCtlIfIndex will only takes values
         When its  ifType value is any one of these
        
         ethernetCsmacd(6),
         propMultiplexor(54)

         "
   ::= { rsPingObjects 5 }

rsPingEtherOamCtlEntry OBJECT-TYPE
    SYNTAX      RsPingEtherOamCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the rsPingEtherOamCtlTable.
         The index elements pingCtlOwnerIndex and pngCtlTestName 
         are defined in RFC2925.
        "
    INDEX {
             pingCtlOwnerIndex,
             pingCtlTestName
          }
    ::= { rsPingEtherOamCtlTable 1 }

RsPingEtherOamCtlEntry ::=
    SEQUENCE {
        rsPingEtherOamCtlTargetAddress        MacAddress,
        rsPingEtherOamCtlVlanId               VlanIndex,
        rsPingEtherOamCtlPriority             Unsigned32,
        rsPingEtherOamCtlContextId            RsContextId
    }

rsPingEtherOamCtlTargetAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the host L2 MAC address to be used at a remote host for
        performing a ping operation. A value for this object MUST be
        set prior to transitioning its corresponding pingCtlEntry to
        active(1) via  pingCtlRowStatus.

        This object essentially replaces pingCtlTargetAddressType and
        pingCtrTArgetAddress in pingCtrlTable.
       "
   

    ::= { rsPingEtherOamCtlEntry 1 }

rsPingEtherOamCtlVlanId OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Vlan in which the frames will be transmitted."
   
    ::= { rsPingEtherOamCtlEntry 2 }


rsPingEtherOamCtlPriority OBJECT-TYPE
    SYNTAX      Unsigned32(0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "802.1p priority value."
    
    ::= { rsPingEtherOamCtlEntry 3 }

rsPingEtherOamCtlContextId OBJECT-TYPE
    SYNTAX      RsContextId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Context Id in which the OAM frames will be transmitted."
   
    ::= { rsPingEtherOamCtlEntry 4 }


-- rsPingLspLdpCtlTable
--        Restrictions:

--        Following objects of pingCtlEntry are not used when
--        pingCtlType is of rsPingLspLdpOAM.

--        pingCtlDataFill
--        pingCtlSourceAddressType,
--        pingCtlSourceAddress,
--        pingCtlIfIndex
--        pingCtlByPassRouteTable,
--        pingCtlDSField

rsPingLspLdpCtlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RsPingLspLdpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Extends the ping Control Table for providing, via SNMP,
         the capability of performing ping operations at
         a remote host by LSP-LDP FEC.

         "
   ::= { rsPingObjects 6 }

rsPingLspLdpCtlEntry OBJECT-TYPE
    SYNTAX      RsPingLspLdpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the rsPingLspLdpCtlTable.  The index
         elements pingCtlOwnerIndex and pngCtlTestName 
         are defined in RFC2925."
    INDEX {
             pingCtlOwnerIndex,
             pingCtlTestName
          }
    ::= { rsPingLspLdpCtlTable 1 }

RsPingLspLdpCtlEntry ::=
    SEQUENCE {
        rsPingLspLdpCtlTgtMaskLen        Unsigned32
    }

rsPingLspLdpCtlTgtMaskLen OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the host mask in number of consecutive bits to be used 
        at a remote host for performing a ping operation.

        A value for this object MUST be set prior to transitioning
        its corresponding pingCtlEntry to active(1) via
        pingCtlRowStatus."

    ::= { rsPingLspLdpCtlEntry 1 }



-- rsPingLspRsvpCtlTable

--         Restrictions:

--         Following objects of pingCtlEntry are not used when
--         pingCtlType is of rsPingLspRsvpOAM.

--         pingCtlDataFill
--         pingCtlSourceAddressType,
--         pingCtlSourceAddress,
--         pingCtlIfIndex
--         pingCtlByPassRouteTable,
--         pingCtlDSField

rsPingLspRsvpCtlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RsPingLspRsvpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Extends the ping Control Table for providing, via SNMP,
         the capability of performing ping operations at
         a remote host by LSP-RSVP Tunnel Id.

         "
   ::= { rsPingObjects 7 }




rsPingLspRsvpCtlEntry OBJECT-TYPE
    SYNTAX      RsPingLspRsvpCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the rsPingLspRsvpCtlTable.  The index
         elements pingCtlOwnerIndex and pingCtlTestName are
         defined in RFC2925."
    INDEX {
             pingCtlOwnerIndex,
             pingCtlTestName
          }
    ::= { rsPingLspRsvpCtlTable 1 }

RsPingLspRsvpCtlEntry ::=
    SEQUENCE {
        rsPingLspRsvpCtlTgtTunnelId      MplsTunnelIndex
    }

rsPingLspRsvpCtlTgtTunnelId OBJECT-TYPE
    SYNTAX      MplsTunnelIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the target tunnel Id to be used at a remote
         host for performing a ping operation.

         This object essentially replaces pingCtlTargetAddressType and
         pingCtrTArgetAddress in pingCtrlTable.
         "
    ::= { rsPingLspRsvpCtlEntry 1 }


-- rsPingHVplsCtlTable

--         Restrictions:

--         Following objects of pingCtlEntry are not used when
--         pingCtlType is of rsPingHVplsOAM.

--         pingCtlTargetAddress,
--         pingCtlTargetAddressType,
--         pingCtlSourceAddressType,
--         pingCtlSourceAddress,
--         pingCtlByPassRouteTable,
--         pingCtlDSField

rsPingHVplsCtlTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RsPingHVplsCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Extends the ping Control Table for providing, via SNMP,
         the capability of performing ping operations at
         a remote host by L2 MAC address on a (h)vpls network.

         "
   ::= { rsPingObjects 8 }

rsPingHVplsCtlEntry OBJECT-TYPE
    SYNTAX      RsPingHVplsCtlEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the rsPingHVplsCtlTable.
         The index elements pingCtlOwnerIndex and 
         pingCtlTestName are defined in RFC2925.
        "
    INDEX {
             pingCtlOwnerIndex,
             pingCtlTestName
          }
    ::= { rsPingHVplsCtlTable 1 }

RsPingHVplsCtlEntry ::=
    SEQUENCE {
        rsPingHVplsCtlTgtAddress           MacAddress,
        rsPingHVplsCtlVlanId               VlanIndex,
        rsPingHVplsCtlContextId            RsContextId,
        rsPingHVplsCtlDirection            RsDirection,
        rsPingHVplsCtlDomains              RsDomainList,
        rsPingHVplsCtlPriority             Unsigned32
    }

rsPingHVplsCtlTgtAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies the host L2 MAC address to be used at a remote host for
        performing a ping operation. A value for this object MUST be
        set prior to transitioning its corresponding pingCtlEntry to
        active(1) via  pingCtlRowStatus.

        This object essentially replaces pingCtlTargetAddressType and
        pingCtrTArgetAddress in pingCtrlTable.
       "

    ::= { rsPingHVplsCtlEntry 1 }

rsPingHVplsCtlVlanId OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Vlan Id in which the OAM frames will be transmitted."
   
    ::= { rsPingHVplsCtlEntry 2 }

rsPingHVplsCtlContextId OBJECT-TYPE
    SYNTAX      RsContextId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Context Id in which the OAM frames will be transmitted."
   
    ::= { rsPingHVplsCtlEntry 3 }

rsPingHVplsCtlDirection OBJECT-TYPE
    SYNTAX      RsDirection
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Direction of ping on a HVPLS network."
   
    ::= { rsPingHVplsCtlEntry 4 }

rsPingHVplsCtlDomains OBJECT-TYPE
    SYNTAX      RsDomainList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "List of domains for a (H)VPLS network. "
   
    ::= { rsPingHVplsCtlEntry 5 }

rsPingHVplsCtlPriority OBJECT-TYPE
    SYNTAX      Unsigned32(0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "802.1p priority value."
    
    ::= { rsPingHVplsCtlEntry 6 }



-- Conformance information
-- Compliance statements

rsPingCompliances OBJECT IDENTIFIER ::= { rsPingConformance 1 }
rsPingGroups      OBJECT IDENTIFIER ::= { rsPingConformance 2 }

 -- Compliance statements

rsPingCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for RIVERSTONE-PING-EXTENSIONS-MIB."
    MODULE  -- this module
        MANDATORY-GROUPS {
            rsPingAtmCtlGroup,
            rsPingEtherOamCtlGroup,
            rsPingLspLdpCtlGroup,
            rsPingLspRsvpCtlGroup,
            rsPingHVplsCtlGroup
        }
    ::= { rsPingCompliances 1 }

 -- MIB groupings

rsPingAtmCtlGroup OBJECT-GROUP
    OBJECTS {
        rsPingAtmCtlPort,
        rsPingAtmCtlVpi,
        rsPingAtmCtlVci,
        rsPingAtmCtlFlowType,
        rsPingAtmCtlLocationID
      }
   STATUS  current
   DESCRIPTION
       "The group of objects that are needed for ATM OAM ping."
    ::= { rsPingGroups 1 }

rsPingEtherOamCtlGroup OBJECT-GROUP
    OBJECTS {
          rsPingEtherOamCtlTargetAddress,
          rsPingEtherOamCtlVlanId,
          rsPingEtherOamCtlPriority,
          rsPingEtherOamCtlContextId
      }
   STATUS  current
   DESCRIPTION
       "The group of objects that are needed for Ethernet OAM ping."
    ::= { rsPingGroups 5 }

rsPingLspLdpCtlGroup OBJECT-GROUP
    OBJECTS {
             rsPingLspLdpCtlTgtMaskLen
      }
   STATUS  current
   DESCRIPTION
       "The group of objects that are needed for LSP LDP OAM ping."
    ::= { rsPingGroups 6 }


rsPingLspRsvpCtlGroup OBJECT-GROUP
    OBJECTS {
          rsPingLspRsvpCtlTgtTunnelId   
      }
   STATUS  current
   DESCRIPTION
       "The group of objects that are needed for LSP RSVP OAM ping."
    ::= { rsPingGroups 7 }

rsPingHVplsCtlGroup OBJECT-GROUP
    OBJECTS {
          rsPingHVplsCtlTgtAddress,
          rsPingHVplsCtlVlanId,
          rsPingHVplsCtlContextId,
          rsPingHVplsCtlDirection,
          rsPingHVplsCtlDomains,
          rsPingHVplsCtlPriority 
      }
   STATUS  current
   DESCRIPTION
       "The group of objects that are needed for HVPLS OAM ping."
    ::= { rsPingGroups 8 }

END