RFC1406Ext-MIB DEFINITIONS ::= BEGIN --#CURRENT_VERSION 1 IMPORTS TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 -- Proprietary Imports cxDSX1Ext FROM CXProduct-SMI; dsx1ExtMibLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to determine current MIB module release supported by the agent. Object is in decimal." DEFVAL { 0 } --#STARTING_VERSION 1 ::= { cxDSX1Ext 1 } dsx1ExtCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Dsx1ExtCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The T1/E1 extensions configuration table." ::= { cxDSX1Ext 10 } dsx1ExtCfgEntry OBJECT-TYPE SYNTAX Dsx1ExtCfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the T1/E1 extensions configuration table." INDEX { dsx1ExtCfgLinkIndex } ::= { dsx1ExtCfgTable 1 } Dsx1ExtCfgEntry ::= SEQUENCE { -- Parameters dsx1ExtCfgLinkIndex INTEGER, dsx1ExtCfgPortStatus INTEGER, dsx1ExtCfgTraps INTEGER, dsx1ExtCfgLineBuildOut INTEGER, -- Status dsx1ExtCfgCardType INTEGER, dsx1ExtCfgLossTxClock TimeTicks, dsx1ExtCfgLossSync TimeTicks, dsx1ExtCfgLossCarrier TimeTicks, dsx1ExtCfgT18ZeroDetect TimeTicks, dsx1ExtCfgT116ZeroDetect TimeTicks, dsx1ExtCfgT1RxB8ZSCode TimeTicks, dsx1ExtCfgT1RxBlueAlarm TimeTicks, dsx1ExtCfgT1RxYellowAlarm TimeTicks, dsx1ExtCfgIoRegTest INTEGER, dsx1ExtCfgSctRegTest INTEGER, dsx1ExtCfgSctLatchRegTest INTEGER, -- Statistics -- Controls dsx1ExtCfgReinit INTEGER } dsx1ExtCfgLinkIndex OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the physical port with the T1/E1 (dsx1Ext) interface. Range of Values: 1 - 2 Default Value: None Configuration Changed: administrative" ::= { dsx1ExtCfgEntry 1 } dsx1ExtCfgPortStatus OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this T1/E1 (dsx1Ext) port is enabled or disabled. Options: disabled (1): The port is physically present but will be disabled (deactivated) after the next reset. enabled (2): The port will become enabled (functional) after the next reset. Default Value: disabled (1) Configuration Changed: administrative" DEFVAL { disabled } --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 10 } dsx1ExtCfgTraps OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines whether the software will produce a T1/E1 (dsx1...) trap. Options: disabled (1): The trap will not be produced. enabled (2): The trap will be generated. Default Value: disabled (1) Configuration Changed: administrative" DEFVAL { disabled } --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 11 } dsx1ExtCfgLineBuildOut OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the attenuation or Line Build Out to be used on the transmitter side of the line. Options: For T1 1: 0 to 133 feet / 0 dB 2: 133 to 266 feet 3: 266 to 399 feet 4: 399 to 533 feet 5: 533 to 655 feet 6: -7.5 dB 7: -15 dB 8: -22.5 dB For E1 1: 75 Ohm (coax. cable) 2: 120 Ohm (RJ45 shilded twisted pair) 3: 75 Ohm ( with protection resistor) 4: 120 Ohm ( with protection resistor) 5: 75 Ohm (with high return loss 1:1.15) 6: 120 Ohm (with high return loss 1:1.36) 7: 75 Ohm (with high return loss 1:1.36) 8: N/A Default Value: 1 Configuration Changed: administrative" DEFVAL { 3 } --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 12 } dsx1ExtCfgCardType OBJECT-TYPE SYNTAX INTEGER { dsx1ExtNoCard (1), dsx1ExtT1Card (2), dsx1ExtE1Card (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the type of card connected to this CPU board. Options: dsx1ExtNoCard (1): Indicates that there is not a T1 or E1 card connected to the line interface or the value indicates that if there is a T1 or E1 card connected then the card is not functional. dsx1ExtT1Card (2): Indicates that a functional T1 card is connected to the line interface. dsx1ExtE1Card (3): Indicates that a functional E1 card is connected to the line interface." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 50 } dsx1ExtCfgLossTxClock OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total time at which the transmit clock was lost on this line interface. If no such event has occurred since system startup, then the value will be zero." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 51 } dsx1ExtCfgLossSync OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total time at which the synchronization was lost on this line interface. If no such event has occurred since system startup, then the value will be zero." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 52 } dsx1ExtCfgLossCarrier OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total time at which the carrier was lost on this line interface. If no such event has occurred since system startup, then the value will be zero." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 53 } dsx1ExtCfgT18ZeroDetect OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total time that 8 consecutive zeros were received on this line interface. If no such event has occurred since system startup, then the value will be zero." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 54 } dsx1ExtCfgT116ZeroDetect OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total time that 16 consecutive zeros were received on this line interface. If no such event has occurred since system startup, then the value will be zero." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 55 } dsx1ExtCfgT1RxB8ZSCode OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total time that a B8ZS code word was detected during reception on this line interface. If no such event has occurred since system startup, then the value will be zero. Note: B8ZS code work detection occurs whether or not the B8ZS mode is selected." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 56 } dsx1ExtCfgT1RxBlueAlarm OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total time that a 'blue alarm' was received on this line interface. A blue alarm is an unframed signal comprised of all ones (1s). If no such event has occurred since system startup, then the value will be zero." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 57 } dsx1ExtCfgT1RxYellowAlarm OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total time that a 'yellow alarm' was received on this line interface. A yellow alarm occurs when bit 2 of 256 consecutive channels is set to zero for at least 254 occurrences in D4 format mode or when 16 consecutive patterns of 00FF hex appear in FDL format mode. If no such event has occurred since system startup, then the value will be zero." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 58 } dsx1ExtCfgIoRegTest OBJECT-TYPE SYNTAX INTEGER { failed (1), passed (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the test results for the T1/E1 I/O card registers." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 59 } dsx1ExtCfgSctRegTest OBJECT-TYPE SYNTAX INTEGER { failed (1), passed (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the test results for the T1 transceiver registers, specifically the 12 Transmit Signaling Registers." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 60 } dsx1ExtCfgSctLatchRegTest OBJECT-TYPE SYNTAX INTEGER { failed (1), passed (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the test results for the T1 transceiver latch register, specifically the second Status Register." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 61 } dsx1ExtCfgReinit OBJECT-TYPE SYNTAX INTEGER ACCESS write-only STATUS mandatory DESCRIPTION "When this object is set to any value, it reinitializes the corresponding port." --#STARTING_VERSION 1 ::= { dsx1ExtCfgEntry 81 } END