-- ***************************************************************** -- REDSTONE-RADIUS-CLIENT-MIB -- -- Redstone Communications Inc. Enterprise MIB -- RADIUS Client MIB -- -- Copyright 1999 Redstone Communications, Incorporated. -- All Rights Reserved. -- ***************************************************************** REDSTONE-RADIUS-CLIENT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32, Integer32, Gauge32, IpAddress, TimeTicks FROM SNMPv2-SMI DisplayString, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF rsMgmt FROM REDSTONE-SMI; rsRadiusClientMIB MODULE-IDENTITY LAST-UPDATED "9906010000Z" ORGANIZATION "Redstone Communications Inc." CONTACT-INFO " Redstone Communications, Inc. 5 Carlisle Road Westford MA 01886 USA Tel: +1-978-692-1999 Email: mib@redstonecom.com " DESCRIPTION "The RADIUS Client MIB for the Redstone Communications Inc. enterprise." REVISION "9906010000Z" DESCRIPTION "Initial version of this MIB module, derived from IETF Internet Drafts of RADIUS Client MIBs for Authentication and Accounting." ::= { rsMgmt 19 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Textual conventions -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No textual conventions are defined in this MIB -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed object groups -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsRadiusClientObjects OBJECT IDENTIFIER ::= {rsRadiusClientMIB 1} rsRadiusGeneralClient OBJECT IDENTIFIER ::= { rsRadiusClientObjects 1 } rsRadiusAuthClient OBJECT IDENTIFIER ::= { rsRadiusClientObjects 2 } rsRadiusAcctClient OBJECT IDENTIFIER ::= { rsRadiusClientObjects 3 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects for RADIUS General -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsRadiusClientIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The NAS-Identifier of the RADIUS client." ::= { rsRadiusGeneralClient 1 } rsRadiusClientAlgorithm OBJECT-TYPE SYNTAX INTEGER { direct(0), roundRobin(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The algorithm used by the client when multiple authentication/accounting servers are configured: direct Use servers in order of precedence, each time beginning with the highest precedence server and proceeding to lower precedence servers if the the RADIUS request fails, until the request succeeds or all servers have been tried. roundRobin Use servers in round-robin order, each time beginning with the next round-robin-ordered server and proceeding cyclically through servers if the RADIUS request fails, until the request succeeds or all servers have been tried." ::= { rsRadiusGeneralClient 2 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects for RADIUS Authentication -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsRadiusAuthClientInvalidServerAddresses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Response packets received from unknown addresses." ::= { rsRadiusAuthClient 1 } -- -- Statistics for RADIUS authentication servers -- rsRadiusAuthClientServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RsRadiusAuthClientServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret." ::= { rsRadiusAuthClient 2 } rsRadiusAuthClientServerEntry OBJECT-TYPE SYNTAX RsRadiusAuthClientServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret." INDEX { rsRadiusAuthClientServerAddress } ::= { rsRadiusAuthClientServerTable 1 } RsRadiusAuthClientServerEntry ::= SEQUENCE { rsRadiusAuthClientServerAddress IpAddress, rsRadiusAuthClientServerPortNumber Integer32, rsRadiusAuthClientRoundTripTime TimeTicks, rsRadiusAuthClientAccessRequests Counter32, rsRadiusAuthClientAccessRetransmissions Counter32, rsRadiusAuthClientAccessAccepts Counter32, rsRadiusAuthClientAccessRejects Counter32, rsRadiusAuthClientAccessChallenges Counter32, rsRadiusAuthClientMalformedAccessResponses Counter32, rsRadiusAuthClientBadAuthenticators Counter32, rsRadiusAuthClientPendingRequests Gauge32, rsRadiusAuthClientTimeouts Counter32, rsRadiusAuthClientUnknownTypes Counter32, rsRadiusAuthClientPacketsDropped Counter32 } rsRadiusAuthClientServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the RADIUS authentication server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use." ::= { rsRadiusAuthClientServerEntry 1 } rsRadiusAuthClientServerPortNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port the client is using to send requests to this server." ::= { rsRadiusAuthClientServerEntry 2 } rsRadiusAuthClientRoundTripTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server." ::= { rsRadiusAuthClientServerEntry 3 } -- Request/Response statistics -- -- TotalIncomingPackets = Accepts + Rejects + Challenges + UnknownTypes -- -- TotalIncomingPackets - MalformedResponses - BadAuthenticators - -- UnknownTypes - PacketsDropped = Successfully received -- -- AccessRequests + PendingRequests + ClientTimeouts = Successfully Received -- -- rsRadiusAuthClientAccessRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions." ::= { rsRadiusAuthClientServerEntry 4 } rsRadiusAuthClientAccessRetransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server." ::= { rsRadiusAuthClientServerEntry 5 } rsRadiusAuthClientAccessAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets (valid or invalid) received from this server." ::= { rsRadiusAuthClientServerEntry 6 } rsRadiusAuthClientAccessRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets (valid or invalid) received from this server." ::= { rsRadiusAuthClientServerEntry 7 } rsRadiusAuthClientAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets (valid or invalid) received from this server." ::= { rsRadiusAuthClientServerEntry 8 } -- "Access-Response" includes an Access-Accept, Access-Challenge -- or Access-Reject rsRadiusAuthClientMalformedAccessResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Signature attributes or unknown types are not included as malformed access responses." ::= { rsRadiusAuthClientServerEntry 9 } rsRadiusAuthClientBadAuthenticators OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server." ::= { rsRadiusAuthClientServerEntry 10 } rsRadiusAuthClientPendingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Acess-Accept, Access-Reject or Access-Challenge, a timeout or retransmission." ::= { rsRadiusAuthClientServerEntry 11 } rsRadiusAuthClientTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout." ::= { rsRadiusAuthClientServerEntry 12 } rsRadiusAuthClientUnknownTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown type which were received from this server on the authentication port." ::= { rsRadiusAuthClientServerEntry 13 } rsRadiusAuthClientPacketsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason." ::= { rsRadiusAuthClientServerEntry 14 } -- -- Configuration of RADIUS authentication servers -- rsRadiusAuthClientCfgServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RsRadiusAuthClientCfgServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret." ::= { rsRadiusAuthClient 3 } rsRadiusAuthClientCfgServerEntry OBJECT-TYPE SYNTAX RsRadiusAuthClientCfgServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret." INDEX { rsRadiusAuthClientServerAddress } ::= { rsRadiusAuthClientCfgServerTable 1 } RsRadiusAuthClientCfgServerEntry ::= SEQUENCE { rsRadiusAuthClientCfgServerAddress IpAddress, rsRadiusAuthClientCfgServerPortNumber Integer32, rsRadiusAuthClientCfgKey DisplayString, rsRadiusAuthClientCfgTimeoutInterval Integer32, rsRadiusAuthClientCfgRetries Integer32, rsRadiusAuthClientCfgMaxPendingRequests Integer32, rsRadiusAuthClientCfgRowStatus RowStatus, rsRadiusAuthClientCfgPrecedence Integer32, rsRadiusAuthClientCfgDeadTime Integer32 } rsRadiusAuthClientCfgServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the RADIUS authentication server referred to in this table entry." ::= { rsRadiusAuthClientCfgServerEntry 1 } rsRadiusAuthClientCfgServerPortNumber OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP port the client is using to send requests to this server. Default is 1812." DEFVAL { 1812 } ::= { rsRadiusAuthClientCfgServerEntry 2 } rsRadiusAuthClientCfgKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The secret (RADIUS authenticator) used by the client during exchanges with this authentication server. The default is a zero-length string, indicating no authenticator is used." DEFVAL { ''H } ::= { rsRadiusAuthClientCfgServerEntry 3 } rsRadiusAuthClientCfgTimeoutInterval OBJECT-TYPE SYNTAX Integer32(3..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The interval between retransmissions of a request to this authentication server. The default is 3." DEFVAL { 3 } ::= { rsRadiusAuthClientCfgServerEntry 4 } rsRadiusAuthClientCfgRetries OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of times to resend a request to this authentication server (in addition to the original request), before resorting to the server specified in the next entry. The default is 3." DEFVAL { 3 } ::= { rsRadiusAuthClientCfgServerEntry 5 } rsRadiusAuthClientCfgMaxPendingRequests OBJECT-TYPE SYNTAX Integer32(10..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of outstanding requests this server can support. The default is 255." DEFVAL { 255 } ::= { rsRadiusAuthClientCfgServerEntry 6 } rsRadiusAuthClientCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Supports 'createAndGo' and 'destroy' only." ::= { rsRadiusAuthClientCfgServerEntry 7 } rsRadiusAuthClientCfgPrecedence OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence." ::= { rsRadiusAuthClientCfgServerEntry 8 } rsRadiusAuthClientCfgDeadTime OBJECT-TYPE SYNTAX Integer32(0..30) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists)." DEFVAL { 5 } ::= { rsRadiusAuthClientCfgServerEntry 9 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects for RADIUS Accounting -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsRadiusAcctClientInvalidServerAddresses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets received from unknown addresses." ::= { rsRadiusAcctClient 1 } -- -- Statistics for RADIUS accounting servers -- rsRadiusAcctClientServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RsRadiusAcctClientServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret." ::= { rsRadiusAcctClient 2 } rsRadiusAcctClientServerEntry OBJECT-TYPE SYNTAX RsRadiusAcctClientServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret." INDEX { rsRadiusAcctClientServerAddress } ::= { rsRadiusAcctClientServerTable 1 } RsRadiusAcctClientServerEntry ::= SEQUENCE { rsRadiusAcctClientServerAddress IpAddress, rsRadiusAcctClientServerPortNumber Integer32, rsRadiusAcctClientRoundTripTime TimeTicks, rsRadiusAcctClientRequests Counter32, rsRadiusAcctClientRetransmissions Counter32, rsRadiusAcctClientResponses Counter32, rsRadiusAcctClientMalformedResponses Counter32, rsRadiusAcctClientBadAuthenticators Counter32, rsRadiusAcctClientPendingRequests Gauge32, rsRadiusAcctClientTimeouts Counter32, rsRadiusAcctClientUnknownTypes Counter32, rsRadiusAcctClientPacketsDropped Counter32 } rsRadiusAcctClientServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the RADIUS accounting server referred to in this table entry. A value of 0.0.0.0 indicates this entry is not in use." ::= { rsRadiusAcctClientServerEntry 1 } rsRadiusAcctClientServerPortNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port the client is using to send requests to this server." ::= { rsRadiusAcctClientServerEntry 2 } rsRadiusAcctClientRoundTripTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server." ::= { rsRadiusAcctClientServerEntry 3 } -- Request/Response statistics -- -- Requests = Responses + PendingRequests + ClientTimeouts -- -- Responses - MalformedResponses - BadAuthenticators - -- UnknownTypes - PacketsDropped = Successfully received rsRadiusAcctClientRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets sent. This does not include retransmissions." ::= { rsRadiusAcctClientServerEntry 4 } rsRadiusAcctClientRetransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same." ::= { rsRadiusAcctClientServerEntry 5 } rsRadiusAcctClientResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets received on the accounting port from this server." ::= { rsRadiusAcctClientServerEntry 6 } rsRadiusAcctClientMalformedResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses." ::= { rsRadiusAcctClientServerEntry 7 } rsRadiusAcctClientBadAuthenticators OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets which contained invalid authenticators received from this server." ::= { rsRadiusAcctClientServerEntry 8 } rsRadiusAcctClientPendingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout or a retransmission." ::= { rsRadiusAcctClientServerEntry 9 } rsRadiusAcctClientTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accounting timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout." ::= { rsRadiusAcctClientServerEntry 10 } rsRadiusAcctClientUnknownTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown type which were received from this server on the accounting port." ::= { rsRadiusAcctClientServerEntry 11 } rsRadiusAcctClientPacketsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets which were received from this server on the accounting port and dropped for some other reason." ::= { rsRadiusAcctClientServerEntry 12 } -- -- Configuration of RADIUS accounting servers -- rsRadiusAcctClientCfgServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RsRadiusAcctClientCfgServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret." ::= { rsRadiusAcctClient 3 } rsRadiusAcctClientCfgServerEntry OBJECT-TYPE SYNTAX RsRadiusAcctClientCfgServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret." INDEX { rsRadiusAcctClientServerAddress } ::= { rsRadiusAcctClientCfgServerTable 1 } RsRadiusAcctClientCfgServerEntry ::= SEQUENCE { rsRadiusAcctClientCfgServerAddress IpAddress, rsRadiusAcctClientCfgServerPortNumber Integer32, rsRadiusAcctClientCfgKey DisplayString, rsRadiusAcctClientCfgTimeoutInterval Integer32, rsRadiusAcctClientCfgRetries Integer32, rsRadiusAcctClientCfgMaxPendingRequests Integer32, rsRadiusAcctClientCfgRowStatus RowStatus, rsRadiusAcctClientCfgPrecedence Integer32, rsRadiusAcctClientCfgDeadTime Integer32 } rsRadiusAcctClientCfgServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the RADIUS accounting server referred to in this table entry." ::= { rsRadiusAcctClientCfgServerEntry 1 } rsRadiusAcctClientCfgServerPortNumber OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP port the client is using to send requests to this server. Default is 1813." DEFVAL { 1813 } ::= { rsRadiusAcctClientCfgServerEntry 2 } rsRadiusAcctClientCfgKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The secret (RADIUS authenticator) used by the client during exchanges with this accounting server. The default is a zero-length string, indicating no authenticator is used." DEFVAL { ''H } ::= { rsRadiusAcctClientCfgServerEntry 3 } rsRadiusAcctClientCfgTimeoutInterval OBJECT-TYPE SYNTAX Integer32(3..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The interval between retransmissions of a request to this accounting server. The default is 3." DEFVAL { 3 } ::= { rsRadiusAcctClientCfgServerEntry 4 } rsRadiusAcctClientCfgRetries OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of times to resend a request to this accounting server (in addition to the original request), before resorting to the server specified in the next entry. The default is 3." DEFVAL { 3 } ::= { rsRadiusAcctClientCfgServerEntry 5 } rsRadiusAcctClientCfgMaxPendingRequests OBJECT-TYPE SYNTAX Integer32(10..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of outstanding requests this server can support. The default is 255." DEFVAL { 255 } ::= { rsRadiusAcctClientCfgServerEntry 6 } rsRadiusAcctClientCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Supports 'createAndGo' and 'destroy' only." ::= { rsRadiusAcctClientCfgServerEntry 7 } rsRadiusAcctClientCfgPrecedence OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Relative precedence of this server with respect to other servers configured in this table. Lower values correspond to higher precedence. Precedence is assigned by the device, in order of entry creation, from higher to lower precedence." ::= { rsRadiusAcctClientCfgServerEntry 8 } rsRadiusAcctClientCfgDeadTime OBJECT-TYPE SYNTAX Integer32(0..30) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The period of time, in minutes, to ignore this server after a request to the server times out (thereby avoiding additional request timeouts for this period, if the server failure persists)." DEFVAL { 5 } ::= { rsRadiusAcctClientCfgServerEntry 9 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notification control objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- rsRadiusClientTrapControl OBJECT IDENTIFIER ::= { rsRadiusClientMIB 2 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- The following two OBJECT IDENTIFIERS are used to define SNMPv2 -- Notifications that are easily translated into SNMPv1 Traps. -- rsRadiusClientTraps OBJECT IDENTIFIER ::= { rsRadiusClientMIB 3 } -- rsRadiusClientTrapPrefix OBJECT IDENTIFIER ::= { rsRadiusClientTraps 0 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsRadiusClientMIBConformance OBJECT IDENTIFIER ::= { rsRadiusClientMIB 2 } rsRadiusClientMIBCompliances OBJECT IDENTIFIER ::= { rsRadiusClientMIBConformance 1 } rsRadiusClientMIBGroups OBJECT IDENTIFIER ::= { rsRadiusClientMIBConformance 2 } -- compliance statements rsRadiusAuthClientCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for authentication clients implementing the Redstone RADIUS Client MIB authentication functionality." MODULE -- this module MANDATORY-GROUPS { rsRadiusGeneralClientGroup, rsRadiusAuthClientGroup } ::= { rsRadiusClientMIBCompliances 1 } rsRadiusAcctClientCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for accounting clients implementing the Redstone RADIUS Client MIB accounting functionality." MODULE -- this module MANDATORY-GROUPS { rsRadiusGeneralClientGroup, rsRadiusAcctClientGroup } ::= { rsRadiusClientMIBCompliances 2 } -- units of conformance rsRadiusGeneralClientGroup OBJECT-GROUP OBJECTS { rsRadiusClientIdentifier, rsRadiusClientAlgorithm } STATUS current DESCRIPTION "The basic collection of objects providing management of RADIUS Clients." ::= { rsRadiusClientMIBGroups 1 } rsRadiusAuthClientGroup OBJECT-GROUP OBJECTS { rsRadiusAuthClientInvalidServerAddresses, rsRadiusAuthClientServerPortNumber, rsRadiusAuthClientRoundTripTime, rsRadiusAuthClientAccessRequests, rsRadiusAuthClientAccessRetransmissions, rsRadiusAuthClientAccessAccepts, rsRadiusAuthClientAccessRejects, rsRadiusAuthClientAccessChallenges, rsRadiusAuthClientMalformedAccessResponses, rsRadiusAuthClientBadAuthenticators, rsRadiusAuthClientPendingRequests, rsRadiusAuthClientTimeouts, rsRadiusAuthClientUnknownTypes, rsRadiusAuthClientPacketsDropped, rsRadiusAuthClientCfgServerPortNumber, rsRadiusAuthClientCfgKey, rsRadiusAuthClientCfgTimeoutInterval, rsRadiusAuthClientCfgRetries, rsRadiusAuthClientCfgMaxPendingRequests, rsRadiusAuthClientCfgRowStatus, rsRadiusAuthClientCfgPrecedence, rsRadiusAuthClientCfgDeadTime } STATUS current DESCRIPTION "The basic collection of objects providing management of RADIUS Authentication Clients." ::= { rsRadiusClientMIBGroups 2 } rsRadiusAcctClientGroup OBJECT-GROUP OBJECTS { rsRadiusAcctClientInvalidServerAddresses, rsRadiusAcctClientServerPortNumber, rsRadiusAcctClientRoundTripTime, rsRadiusAcctClientRequests, rsRadiusAcctClientRetransmissions, rsRadiusAcctClientResponses, rsRadiusAcctClientMalformedResponses, rsRadiusAcctClientBadAuthenticators, rsRadiusAcctClientPendingRequests, rsRadiusAcctClientTimeouts, rsRadiusAcctClientUnknownTypes, rsRadiusAcctClientPacketsDropped, rsRadiusAcctClientCfgServerPortNumber, rsRadiusAcctClientCfgKey, rsRadiusAcctClientCfgTimeoutInterval, rsRadiusAcctClientCfgRetries, rsRadiusAcctClientCfgMaxPendingRequests, rsRadiusAcctClientCfgRowStatus, rsRadiusAcctClientCfgPrecedence, rsRadiusAcctClientCfgDeadTime } STATUS current DESCRIPTION "The basic collection of objects providing management of RADIUS Accounting Clients." ::= { rsRadiusClientMIBGroups 3 } END