-- ***************************************************************** -- REDSTONE-PPPOE-MIB -- -- Redstone Communications Inc. Enterprise MIB -- PPPoE MIB -- -- Copyright 1999 Redstone Communications, Incorporated. -- All Rights Reserved. -- ***************************************************************** REDSTONE-PPPOE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF RowStatus, TimeStamp FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB rsMgmt FROM REDSTONE-SMI RsNextIfIndex FROM REDSTONE-TC; rsPPPoEMIB MODULE-IDENTITY LAST-UPDATED "9801010000Z" ORGANIZATION "Redstone Communications, Inc." CONTACT-INFO " Redstone Communications, Inc. 5 Carlisle Road Westford MA 01886 USA Tel: +1-978-692-1999 Email: mib@redstonecom.com " DESCRIPTION "The PPPoE MIB for the Redstone Communications Inc. enterprise." REVISION "9801010000Z" DESCRIPTION "Initial version of this MIB module." ::= { rsMgmt 18 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Textual conventions -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No textual conventions are defined in this MIB. -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsPPPoEObjects OBJECT IDENTIFIER ::= { rsPPPoEMIB 1 } -- -- This MIB contains managed objects for each of two interface -- layers: PPPoE interfaces, and PPPoE subinterfaces. -- For each of these layers, management objects are provided to -- query for an available interface index, and to create/delete -- interfaces of that type. Creating/deleting these interface -- types using this MIB has the side effect of creating/deleting -- corresponding entries in the Interface MIB ifTable/ifXTable, -- and in the Redstone Enterprise Interface MIB rsIfTable. -- -- -- rsPPPoEIfLayer OBJECT IDENTIFIER ::= { rsPPPoEObjects 1 } rsPPPoESubIfLayer OBJECT IDENTIFIER ::= { rsPPPoEObjects 2 } -- ////////////////////////////////////////////////////////////////////// -- -- PPPoE Interface Layer -- -- This layer is managed with the following elements: -- -- o NextIfIndex (generator for PPPoE IfIndex selection) -- o Interface Table (creation/configuration/deletion of PPPoE interfaces) -- o Statistics Table (PPPoE interface statistics) -- -- ////////////////////////////////////////////////////////////////////// -- -- IfIndex selection for creating new PPPoE interfaces -- rsPPPoENextIfIndex OBJECT-TYPE SYNTAX RsNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in rsPPPoEIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. " ::= { rsPPPoEIfLayer 1 } -- -- The PPPoE Interface Table -- rsPPPoEIfTable OBJECT-TYPE SYNTAX SEQUENCE OF RsPPPoEIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters for the PPPoE service on this interface." REFERENCE "RFC 2156 A method for transmitting PPP over Ethernet" ::= { rsPPPoEIfLayer 2 } rsPPPoEIfEntry OBJECT-TYPE SYNTAX RsPPPoEIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Parameters for a particular PPPoE interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/rsIfTable, and rsPPPoEIfStatsTable." INDEX { rsPPPoEIfIfIndex } ::= { rsPPPoEIfTable 1 } RsPPPoEIfEntry ::= SEQUENCE { rsPPPoEIfIfIndex InterfaceIndex, rsPPPoEIfMaxNumSessions INTEGER, rsPPPoEIfRowStatus RowStatus, rsPPPoEIfLowerIfIndex InterfaceIndexOrZero } rsPPPoEIfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the corresponding ifEntry." ::= { rsPPPoEIfEntry 1 } rsPPPoEIfMaxNumSessions OBJECT-TYPE SYNTAX INTEGER (0..65336) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of sessions allowed on the PPPoE interface, zero indicates unlimited" DEFVAL { 0 } ::= { rsPPPoEIfEntry 2 } rsPPPoEIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: rsPPPoEIfRowStatus rsPPPoEIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for rsPPPoEIfIndex must have been determined previously, by reading rsPPPoENextIfIndex. The interface identified by rsPPPoEIfLowerIfIndex must exist, and must be an interface type that permits layering of PPPoE above it. A corresponding entry in ifTable/ifXTable/rsIfTable is created/destroyed as a result of creating/destroying an entry in this table. " ::= { rsPPPoEIfEntry 3 } rsPPPoEIfLowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { rsPPPoEIfEntry 4 } -- -- The PPPoE Interface Statistics Table -- rsPPPoEIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsPPPoEIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics for the PPP over Ethernet Interface for the PPPoE service on this interface." ::= { rsPPPoEIfLayer 3 } rsPPPoEIfStatsEntry OBJECT-TYPE SYNTAX RsPPPoEIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics for a particular PPPoE Interface." INDEX { rsPPPoEIfIfIndex } ::= { rsPPPoEIfStatsTable 1 } RsPPPoEIfStatsEntry ::= SEQUENCE { rsPPPoEIfStatsRxPADI Counter32, rsPPPoEIfStatsTxPADO Counter32, rsPPPoEIfStatsRxPADR Counter32, rsPPPoEIfStatsTxPADS Counter32, rsPPPoEIfStatsRxPADT Counter32, rsPPPoEIfStatsTxPADT Counter32, rsPPPoEIfStatsRxInvVersion Counter32, rsPPPoEIfStatsRxInvCode Counter32, rsPPPoEIfStatsRxInvTags Counter32, rsPPPoEIfStatsRxInvSession Counter32, rsPPPoEIfStatsRxInvTypes Counter32, rsPPPoEIfStatsRxInvPackets Counter32, rsPPPoEIfStatsRxInsufficientResources Counter32 } rsPPPoEIfStatsRxPADI OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADI packets received." ::= { rsPPPoEIfStatsEntry 1 } rsPPPoEIfStatsTxPADO OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADO packets transmitted." ::= { rsPPPoEIfStatsEntry 2 } rsPPPoEIfStatsRxPADR OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADR packets received." ::= { rsPPPoEIfStatsEntry 3 } rsPPPoEIfStatsTxPADS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADS packets transmitted." ::= { rsPPPoEIfStatsEntry 4 } rsPPPoEIfStatsRxPADT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADT packets received." ::= { rsPPPoEIfStatsEntry 5 } rsPPPoEIfStatsTxPADT OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PADT packets transmitted." ::= { rsPPPoEIfStatsEntry 6 } rsPPPoEIfStatsRxInvVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid version." ::= { rsPPPoEIfStatsEntry 7 } rsPPPoEIfStatsRxInvCode OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid code." ::= { rsPPPoEIfStatsEntry 8 } rsPPPoEIfStatsRxInvTags OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid tags." ::= { rsPPPoEIfStatsEntry 9 } rsPPPoEIfStatsRxInvSession OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid session identifiers." ::= { rsPPPoEIfStatsEntry 10 } rsPPPoEIfStatsRxInvTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received with invalid types." ::= { rsPPPoEIfStatsEntry 11 } rsPPPoEIfStatsRxInvPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of invalid packets received." ::= { rsPPPoEIfStatsEntry 12 } rsPPPoEIfStatsRxInsufficientResources OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of session requests that could not be honored due to invalid resources." ::= { rsPPPoEIfStatsEntry 13 } -- ////////////////////////////////////////////////////////////////////// -- -- PPPoE Subinterface Layer -- -- This layer is managed with the following elements: -- -- o NextIfIndex (generator for PPPoE subinterface IfIndex selection) -- o SubIf Table (creation/configuration/deletion of PPPoE subinterfaces) -- -- ////////////////////////////////////////////////////////////////////// -- -- IfIndex selection for creating new PPPoE Subinterfaces -- rsPPPoESubIfNextIfIndex OBJECT-TYPE SYNTAX RsNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in rsPPPoESubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. " ::= { rsPPPoESubIfLayer 1 } -- -- The PPPoE Subinterface Table -- rsPPPoESubIfTable OBJECT-TYPE SYNTAX SEQUENCE OF RsPPPoESubIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for PPPoE Subinterfaces present in the system." ::= { rsPPPoESubIfLayer 2 } rsPPPoESubIfEntry OBJECT-TYPE SYNTAX RsPPPoESubIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of a PPPoE Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/rsIfTable." INDEX { rsPPPoESubIfIndex } ::= { rsPPPoESubIfTable 1 } RsPPPoESubIfEntry ::= SEQUENCE { rsPPPoESubIfIndex InterfaceIndex, rsPPPoESubIfRowStatus RowStatus, rsPPPoESubIfLowerIfIndex InterfaceIndexOrZero, rsPPPoESubIfId Integer32, rsPPPoESubIfSessionId Integer32 } rsPPPoESubIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the PPPoE Subinterface. When creating entries in this table, suitable values for this object are determined by reading rsPPPoESubNextIfIndex." ::= { rsPPPoESubIfEntry 1 } rsPPPoESubIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: rsPPPoESubIfRowStatus rsPPPoESubIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for rsPPPoESubIfIndex must have been determined previously, by reading rsPPPoESubIfNextIfIndex. The interface identified by rsPPPoESubIfLowerIfIndex must exist, and must be a PPPoE interface. A positive value configured for rsPPPoESubIfId must not already be assigned to another subinterface layered onto the same underlying PPPoE interface. A corresponding entry in ifTable/ifXTable/rsIfTable is created/destroyed as a result of creating/destroying an entry in this table. " ::= { rsPPPoESubIfEntry 2 } rsPPPoESubIfLowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of a PPPoE interface over which this PPPoE Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation." ::= { rsPPPoESubIfEntry 3 } rsPPPoESubIfId OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "An integer identifier for the PPPoE subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces configured on the same underlying PPPoE interface. If this object is not configured, or is configured with a value of -1, a nonzero value will be allocated internally and can be retrieved from this object after table entry creation has succeeded. A value of zero for this object is reserved for future use." DEFVAL { -1 } ::= { rsPPPoESubIfEntry 4 } rsPPPoESubIfSessionId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The current sessionId associated with this sub-interface." ::= { rsPPPoESubIfEntry 5 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notification control objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- rsPPPoETrapControl OBJECT IDENTIFIER ::= { rsPPPoEMIB 2 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- The following two OBJECT IDENTIFIERS are used to define SNMPv2 -- Notifications that are easily translated into SNMPv1 Traps. -- rsPPPoETraps OBJECT IDENTIFIER ::= { rsPPPoEMIB 3 } -- rsPPPoETrapPrefix OBJECT IDENTIFIER ::= { rsPPPoETraps 0 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsPPPoEConformance OBJECT IDENTIFIER ::= { rsPPPoEMIB 4 } rsPPPoECompliances OBJECT IDENTIFIER ::= { rsPPPoEConformance 1 } rsPPPoEGroups OBJECT IDENTIFIER ::= { rsPPPoEConformance 2 } -- compliance statements rsPPPoECompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Redstone PPPoE MIB." MODULE -- this module MANDATORY-GROUPS { rsPPPoEGroup, rsPPPoESubIfGroup } ::= { rsPPPoECompliances 1 } -- units of conformance rsPPPoEGroup OBJECT-GROUP OBJECTS { rsPPPoENextIfIndex, rsPPPoEIfIfIndex, rsPPPoEIfMaxNumSessions, rsPPPoEIfRowStatus, rsPPPoEIfLowerIfIndex, rsPPPoEIfStatsRxPADI, rsPPPoEIfStatsTxPADO, rsPPPoEIfStatsRxPADR, rsPPPoEIfStatsTxPADS, rsPPPoEIfStatsRxPADT, rsPPPoEIfStatsTxPADT, rsPPPoEIfStatsRxInvVersion, rsPPPoEIfStatsRxInvCode, rsPPPoEIfStatsRxInvTags, rsPPPoEIfStatsRxInvSession } STATUS current DESCRIPTION "A collection of objects providing management of PPPoE interfaces in a Redstone product." ::= { rsPPPoEGroups 1 } rsPPPoESubIfGroup OBJECT-GROUP OBJECTS { rsPPPoESubIfNextIfIndex, rsPPPoESubIfRowStatus, rsPPPoESubIfLowerIfIndex, rsPPPoESubIfId, rsPPPoESubIfSessionId } STATUS current DESCRIPTION "A collection of objects providing management of PPPoE subinterfaces in a Redstone product." ::= { rsPPPoEGroups 2 } END