-- ***************************************************************** -- REDSTONE-DS1-MIB -- -- Redstone Communications Inc. Enterprise MIB -- DS1 MIB -- -- Copyright 1998 Redstone Communications, Incorporated. -- All Rights Reserved. -- ***************************************************************** REDSTONE-DS1-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF ifIndex FROM IF-MIB rsMgmt FROM REDSTONE-SMI RsTimeSlotMap FROM REDSTONE-TC; rsDs1MIB MODULE-IDENTITY LAST-UPDATED "9906170000Z" ORGANIZATION "Redstone Communications, Inc." CONTACT-INFO " Redstone Communications, Inc. 5 Carlisle Road Westford MA 01886 USA Tel: +1-978-692-1999 Email: mib@redstonecom.com " DESCRIPTION "The T1 MIB for the Redstone Communications Inc. enterprise." REVISION "9906170000Z" DESCRIPTION "Updated version of this MIB module." ::= { rsMgmt 5 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Textual conventions -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No textual conventions are defined in this MIB -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsDs1Objects OBJECT IDENTIFIER ::= { rsDs1MIB 1 } -- -- This MIB contains managed objects for DS1/E1 interfaces. -- Management objects are provided to supplement those -- found in RFC1406 DS1/E1 MIB. -- -- ////////////////////////////////////////////////////////////////////// -- -- DS1 Interfaces -- -- ////////////////////////////////////////////////////////////////////// -- -- The DS1 Configuration Table -- rsDsx1ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF RsDsx1ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for DS1/E1 interfaces present in the system." ::= { rsDs1Objects 1 } rsDsx1ConfigEntry OBJECT-TYPE SYNTAX RsDsx1ConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an DS1/E1 interface." INDEX { ifIndex } ::= { rsDsx1ConfigTable 1 } RsDsx1ConfigEntry ::= SEQUENCE { rsDsx1TimeSlotMap RsTimeSlotMap, rsDsx1Ds1ChannelNumber Integer32, rsDsx1Capabilities Integer32, rsDsx1Mode INTEGER, rsDsx1LineBuildOutCapabilities Integer32, rsDsx1LineBuildOutType INTEGER, rsDsx1LineAttenuation INTEGER, rsDsx1LineLength Integer32 } rsDsx1TimeSlotMap OBJECT-TYPE SYNTAX RsTimeSlotMap MAX-ACCESS read-only STATUS current DESCRIPTION "A bitmap representing the timeslots on the DS1/E1 interface that have been allocated for service. For channelized DS1/E1, set bits reflect the union of timeslot allocations across all fractional arrangements operating over this DS1/E1 interface. For unchannelized DS1/E1, all relevant timeslot bits will be set." ::= { rsDsx1ConfigEntry 1 } rsDsx1Ds1ChannelNumber OBJECT-TYPE SYNTAX Integer32 (0..28) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable represents the channel number of the DS1/E1 on its parent DS3/E3. A value of 0 indicates this DS1/E1 does not have a parent DS3/E3." ::= { rsDsx1ConfigEntry 2 } rsDsx1Capabilities OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "A value which indicates the set of capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero, Then, for each capability, C, in the range 1 through 3, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only E1 capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both T1 and J1 capable would have a value of 5 (2^(1-1) + 2^(3-1)). The values for DS1/E1 interface capabilities are as follows: capability function 1 T1 2 E1 3 J1" ::= { rsDsx1ConfigEntry 3 } rsDsx1Mode OBJECT-TYPE SYNTAX INTEGER { t1(1), e1(2), j1(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the DS1/E1 interface mode. The value of the rsDsx1Capabilities object for the DS1/E1 interface indicates the valid set of values for this object." ::= { rsDsx1ConfigEntry 4 } rsDsx1LineBuildOutCapabilities OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "A value which indicates the set of line build out capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero, Then, for each line build out capability, C, in the range 1 or 2, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only short haul capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both short haul and long haul capable would have a value of 3 (2^(1-1) + 2^(2-1)). The values for DS1/E1 interface line build out capabilities are as follows: line build out capability function 1 short haul 2 long haul" ::= { rsDsx1ConfigEntry 5 } rsDsx1LineBuildOutType OBJECT-TYPE SYNTAX INTEGER { shortHaul(1), longHaul(2), notSupported(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the configured line build out type of the DS1/E1 interface. The value of the rsDsx1LineBuildOutCapabilities object for the DS1/E1 interface indicates the valid set of values for this object." ::= { rsDsx1ConfigEntry 6 } rsDsx1LineAttenuation OBJECT-TYPE SYNTAX INTEGER { db0(1), dbMinus7Point5(2), dbMinus15(3), dbMinus22Point5(4), notSupported(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the configured line attenuation of the DS1/E1 interface. Note that the value of this object only takes effect when the value of the rsDsx1LineBuildOutType for the DS1/E1 interface is set to longHaul(2)." ::= { rsDsx1ConfigEntry 7 } rsDsx1LineLength OBJECT-TYPE SYNTAX Integer32 (0..64000) UNITS "meters" MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the length of the DS1/E1 line in meters. Note that the value of this object only takes effect when the value of the rsDsx1LineBuildOutType for the DS1/E1 interface is set to shortHaul(1)." ::= { rsDsx1ConfigEntry 8 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notification control objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- rsDs1TrapControl OBJECT IDENTIFIER ::= { rsDs1MIB 2 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholder follows. -- The following two OBJECT IDENTIFIERS are used to define SNMPv2 -- Notifications that are easily translated into SNMPv1 Traps. -- rsDs1Traps OBJECT IDENTIFIER ::= { rsDs1MIB 3 } -- rsDs1TrapPrefix OBJECT IDENTIFIER ::= { rsDs1Traps 0 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ rsDs1Conformance OBJECT IDENTIFIER ::= { rsDs1MIB 4 } rsDs1Compliances OBJECT IDENTIFIER ::= { rsDs1Conformance 1 } rsDs1Groups OBJECT IDENTIFIER ::= { rsDs1Conformance 2 } -- compliance statements rsDs1Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Redstone DS1/E1 MIB." MODULE -- this module MANDATORY-GROUPS { rsDs1Group } ::= { rsDs1Compliances 1 } -- units of conformance rsDs1Group OBJECT-GROUP OBJECTS { rsDsx1TimeSlotMap, rsDsx1Ds1ChannelNumber } STATUS current DESCRIPTION "A collection of objects providing management of DS1/E1 interfaces in a Redstone product." ::= { rsDs1Groups 1 } END