RAD-DS1-MIB DEFINITIONS ::= BEGIN
--Title:    RAD-DS1   MIB
--
-- Copyright 1998 RAD Data Communications, Ltd.
-- All Rights Reserved.  
-- IMPORTS
-- PerfCurrentCount, PerfIntervalCount	FROM PerfHist-TC-MIB;
--      OBJECT-TYPE                     FROM RFC-1212
 --     radWan                          FROM RAD-GEN-MIB;
 
 IMPORTS diverseIfWanGen FROM RAD-MIB
			NOTIFICATION-TYPE, OBJECT-TYPE, Integer32, Counter32 FROM SNMPv2-SMI
			PerfCurrentCount, PerfIntervalCount, PerfTotalCount FROM PerfHist-TC-MIB
			TruthValue FROM SNMPv2-TC
			ifAlias FROM IF-MIB
			alarmSeverity, alarmState FROM RAD-MIB
			;
			
--                RAD-DS1 MIB   
--Title:     RAD's DS1 INTERFACE MIB
--Date:      03.02.98
--By:        Ilana Schvetz
--File:      radds1.mib
-- Last updated by Yig'al Hachmon 13-July-2004
ds1Interface  OBJECT IDENTIFIER  ::=  {diverseIfWanGen 4}
prtDS1Events OBJECT IDENTIFIER       ::= {ds1Interface 0}
prtDs1PerfHistory  OBJECT IDENTIFIER  ::=  {ds1Interface 1}
  --   Extension to the dsx1 current table
dsx1XCurrentTable  OBJECT-TYPE
       SYNTAX      SEQUENCE OF Dsx1XCurrentEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
       "A list of current statistics entries.  This table
        contains additional objects for the current table."
       ::= { prtDs1PerfHistory 2 }
dsx1XCurrentEntry OBJECT-TYPE
       SYNTAX  Dsx1XCurrentEntry 
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
       "An entry containing additional statistical counters
        applicable to a particular current table."
 --      AUGMENTS    { dsx1CurrentEntry }
         INDEX   { dsx1CurrentIndex }
       ::= { dsx1XCurrentTable 1 }
Dsx1XCurrentEntry     ::=
      SEQUENCE {
        dsx1CurrentLOS		    PerfCurrentCount,
        dsx1CurrentLOF		    PerfCurrentCount,
        dsx1CurrentLOC			PerfCurrentCount,
        dsx1CurrentAIS		    PerfCurrentCount,
        dsx1CurrentRAI			PerfCurrentCount,
        dsx1CurrentLOMF			PerfCurrentCount,
        dsx1CurrentFEBE			PerfCurrentCount,
        dsx1CurrentStatus		OCTET STRING,
		dsx1CurrentBPV			PerfCurrentCount,
		dsx1CurrentLOCRCMF	    PerfCurrentCount,
		dsx1CurrentLOFC			PerfCurrentCount,
		dsx1CurrentCRCErrors	PerfCurrentCount
}
dsx1CurrentLOS OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "The counter associated with the number of LOS
         seconds, encountered by a DS1 interface in
         the current 15 minute interval."
        ::= { dsx1XCurrentEntry 1 }
dsx1CurrentLOF OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "The counter associated with the number of LOF
         seconds, encountered by a DS1
         interface in the current 15 minute interval."
        ::= { dsx1XCurrentEntry 2 }
dsx1CurrentLOC OBJECT-TYPE
         SYNTAX PerfCurrentCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         " Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
           lost cells delineation ."
         ::= { dsx1XCurrentEntry 3 }
dsx1CurrentAIS OBJECT-TYPE
        SYNTAX PerfCurrentCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "The counter associated with the number of AIS
         seconds, encountered by a DS1
         interface in the current 15 minute interval."
        ::= { dsx1XCurrentEntry 4 }
dsx1CurrentRAI OBJECT-TYPE
         SYNTAX PerfCurrentCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "Remote Alarm Indication: Transmitted  in the outgoing direction
	      (toward the PABX) over FDL bits when the DS1 device detected 
          an incoming Loss Of Frame. Received from the far end (PABX) 
          over FDL when it detects a Loss of frame."
         ::= { dsx1XCurrentEntry 5 }
dsx1CurrentLOMF OBJECT-TYPE
         SYNTAX PerfCurrentCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "Loss of Multi-Frame sequence  in E1 time slot 16."
         ::= { dsx1XCurrentEntry 6 }
dsx1CurrentFEBE OBJECT-TYPE
         SYNTAX PerfCurrentCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "Far End Block Errors, as reported in the first bit
          of frames 13 and 15, on multiframe E1 lines with CRC4,
          in the current 15 minute interval."
         ::= { dsx1XCurrentEntry 7 }
dsx1CurrentStatus OBJECT-TYPE
	SYNTAX OCTET STRING  (SIZE (4))
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "The statuses of the current interval:
           0 - Valid.
           1 - redundantLinkSwitch - the link has been switched 
               by a redundancy mechanism.
           2 - discontinuity - module was partialy out.
           4 - notValid - module is out."
         ::= { dsx1XCurrentEntry 8 }
dsx1CurrentBPV OBJECT-TYPE
         SYNTAX PerfCurrentCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "The counter associated with the number of BPVs (Bi-Polar Violations)
          encountered by a DS1	interface in the current 15 minute interval."
         ::= { dsx1XCurrentEntry 9 }
dsx1CurrentLOCRCMF OBJECT-TYPE
         SYNTAX PerfCurrentCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "Loss of CRC4 Multi-Frame sequence in E1.
          encountered in the current 15 minute interval"
         ::= { dsx1XCurrentEntry 10 }
dsx1CurrentLOFC	OBJECT-TYPE
         SYNTAX PerfCurrentCount 
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "Counts the number of loss of frame events measured.
          encountered in the current 15 minute interval"
         ::= { dsx1XCurrentEntry 11 }
dsx1CurrentCRCErrors  OBJECT-TYPE
         SYNTAX PerfCurrentCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "Counts the number of CRC error events,
          encountered in the current 15 minute interval."
         ::= { dsx1XCurrentEntry 12 }
-- Interval table
dsx1XIntervalTable OBJECT-TYPE
         SYNTAX  SEQUENCE OF Dsx1XIntervalEntry
         MAX-ACCESS  not-accessible
         STATUS  current
         DESCRIPTION
         " A list of Interval entries.  This table
           contains additional objects for the interval table."
         ::= { prtDs1PerfHistory 3 }
dsx1XIntervalEntry OBJECT-TYPE
         SYNTAX  Dsx1XIntervalEntry
         MAX-ACCESS  not-accessible
         STATUS  current
         DESCRIPTION
         "An entry containing additional statistical counters
          applicable to a particular interval table."
      -- AUGMENTS    { dsx1IntervalEntry }
         INDEX   { dsx1IntervalIndex, dsx1IntervalNumber }
         ::= { dsx1XIntervalTable 1 }
Dsx1XIntervalEntry     ::=
         SEQUENCE {
         dsx1IntervalLOS	   PerfIntervalCount,
         dsx1IntervalLOF	   PerfIntervalCount,
	     dsx1IntervalLOC       PerfIntervalCount,
         dsx1IntervalAIS	   PerfIntervalCount,
	     dsx1IntervalRAI	   PerfIntervalCount,
	     dsx1IntervalLOMF	   PerfIntervalCount,
		 dsx1IntervalFEBE	   PerfIntervalCount,
         dsx1IntervalStatus	   OCTET STRING,
         dsx1IntervalBPV	   PerfIntervalCount,
		 dsx1IntervalLOCRCMF   PerfIntervalCount,
		 dsx1IntervalLOFC	   PerfIntervalCount
}
dsx1IntervalLOS OBJECT-TYPE
         SYNTAX PerfIntervalCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
          "The counter associated with the number of LOS
           seconds , encountered by a DS1 interface in
           one of the previous 96, individual 15 minute,
           intervals."
         ::= { dsx1XIntervalEntry 1 }
dsx1IntervalLOF OBJECT-TYPE
          SYNTAX PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS  current
          DESCRIPTION
           "The counter associated with the number of OOF
            seconds, encountered by a DS1
            interface in one of the previous 96, individual 15
            minute, intervals."
          ::= { dsx1XIntervalEntry 2 }
dsx1IntervalLOC OBJECT-TYPE
         SYNTAX PerfIntervalCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
          " Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
            lost cells delineation ."
         ::= { dsx1XIntervalEntry 3 }
dsx1IntervalAIS OBJECT-TYPE
          SYNTAX PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS  current
          DESCRIPTION
           "The counter associated with the number of AIS
            seconds, encountered by a SONET
            interface in one of the previous 96, individual 15
            minute, intervals."
          ::= { dsx1XIntervalEntry 4 }
dsx1IntervalRAI OBJECT-TYPE
           SYNTAX PerfIntervalCount
           MAX-ACCESS  read-only
           STATUS  current
           DESCRIPTION
           "Remote Alarm Indication: Transmitted  in the outgoing direction
	        (toward the PABX) over FDL bits when the DS1 device detected 
            an incoming Loss Of Frame. Received from the far end (PABX) 
            over FDL when it detects a Loss of frame."
           ::= { dsx1XIntervalEntry 5 }
dsx1IntervalLOMF OBJECT-TYPE
           SYNTAX PerfIntervalCount
           MAX-ACCESS  read-only
           STATUS  current
           DESCRIPTION
           "Loss of Multi-Frame sequence  in E1 time slot 16."
           ::= { dsx1XIntervalEntry 6 }
dsx1IntervalFEBE OBJECT-TYPE
          SYNTAX PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS  current
          DESCRIPTION
          "Far End Block Errors, as reported in the first bit
           of frames 13 and 15, on multiframe E1 lines with CRC4,
           in one of the previous 96, individual, 15 minute intervals."
          ::= { dsx1XIntervalEntry 7 }
dsx1IntervalStatus OBJECT-TYPE
	SYNTAX OCTET STRING  (SIZE (4))
           MAX-ACCESS  read-only
           STATUS  current
           DESCRIPTION
            "The statuses of the current interval:
              0 - Valid.
              1 - redundantLinkSwitch - the link has been switched 
                  by a redundancy mechanism.
              2 - discontinuity - module was partialy out.
              4 - notValid - module is out."
           ::= { dsx1XIntervalEntry 8 }
dsx1IntervalBPV OBJECT-TYPE
         SYNTAX PerfIntervalCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "The counter associated with the number of BPV (Bi-Polar Violations)
          encountered by a DS1	interface in one of the previous 96, 
          individual 15 minute, intervals."
         ::= { dsx1XIntervalEntry 9 }
dsx1IntervalLOCRCMF OBJECT-TYPE
         SYNTAX PerfIntervalCount
         MAX-ACCESS  read-only
         STATUS  current
         DESCRIPTION
         "Loss of CRC4 Multi-Frame sequence in E1."
         ::= { dsx1XIntervalEntry 10 }
dsx1IntervalLOFC OBJECT-TYPE
          SYNTAX PerfIntervalCount
          MAX-ACCESS  read-only
          STATUS  current
          DESCRIPTION
          "Counts the number of loss of frame events measured
          in one of the previous 96, individual 15 minute, intervals."
          ::= { dsx1XIntervalEntry 11 }
--   Extension to the dsx1 Total table
dsx1XTotalTable  OBJECT-TYPE
       SYNTAX      SEQUENCE OF Dsx1XTotalEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
       "A list of Total statistics entries.  This table
        contains additional objects for the Total table."
       ::= { prtDs1PerfHistory 4 }
dsx1XTotalEntry OBJECT-TYPE
       SYNTAX  Dsx1XTotalEntry 
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
       "An entry containing additional statistical counters
        applicable to a particular current table."
 --     AUGMENTS    { dsx1CurrentEntry }
        INDEX   { dsx1TotalIndex }
       ::= { dsx1XTotalTable 1 }
Dsx1XTotalEntry     ::=
      SEQUENCE {
	  dsx1TotalLOS 			PerfTotalCount,
	  dsx1TotalBPV			PerfTotalCount,
      dsx1TotalLOFC			PerfTotalCount
      }
 dsx1TotalLOS OBJECT-TYPE
      SYNTAX PerfTotalCount
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
      "The counter associated with the number of LOS (Loss of Signal) 
      seconds encountered by a DS1 interface in the previous 
      24 hour interval.
      Invalid 15 minute intervals count as 0."
      ::= { dsx1XTotalEntry 1 }
dsx1TotalBPV OBJECT-TYPE
      SYNTAX PerfTotalCount
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
      "The counter associated with the number of BPV (Bi-Polar Violations)
       encountered by a DS1	interface in the previous 24 hour interval.
       Invalid 15 minute intervals count as 0."
      ::= { dsx1XTotalEntry 9 }
dsx1TotalLOFC OBJECT-TYPE
      SYNTAX PerfTotalCount
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
      "The counter associated with the number loss of frames
       encountered by a DS1	interface in the previous 24 hour interval.
       Invalid 15 minute intervals count as 0."
      ::= { dsx1XTotalEntry 11 }
-- DS1 Data Stream Statistics Table
dsx1DataStreamStatTable OBJECT-TYPE
      SYNTAX  SEQUENCE OF Dsx1DataStreamStatEntry
      MAX-ACCESS   not-accessible
      STATUS  current
      DESCRIPTION
      "The DS1 Data Stream Statistics table."
      ::= { prtDs1PerfHistory 5 }
dsx1DataStreamStatEntry OBJECT-TYPE
      SYNTAX  Dsx1DataStreamStatEntry
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
      "An entry in the DS1 Data Stream Statistics table."
      INDEX   { dsx1DataStreamStatIfIndex, dsx1DataStreamStatIndex }
      ::= { dsx1DataStreamStatTable 1 }
Dsx1DataStreamStatEntry ::=
      SEQUENCE {
      dsx1DataStreamStatIfIndex			Integer32,
      dsx1DataStreamStatIndex			Integer32,
	  dsx1DataStreamStatValid			TruthValue,
      dsx1DataStreamStatInFrames		Counter32,
      dsx1DataStreamStatInBytes			Counter32,
      dsx1DataStreamStatInDiscards		Counter32,
      dsx1DataStreamStatInErrors		Counter32,
      dsx1DataStreamStatOutFrames		Counter32,
      dsx1DataStreamStatOutBytes		Counter32,
      dsx1DataStreamStatOutDiscards		Counter32
      }
dsx1DataStreamStatIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "The index of the DS1 interface.
     It may be ifIndex."
    ::= { dsx1DataStreamStatEntry 1 }
dsx1DataStreamStatIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "The DS1 Data Stream Index.
     For Vmux - the following indices are used:
       1  for Transparent
	 2-3  for SS71-SS72 (respectively)
	 4-7  for Data1-Data4 (respectively)
	 ."
    ::= { dsx1DataStreamStatEntry 2 }
dsx1DataStreamStatValid OBJECT-TYPE
    SYNTAX  TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "Indicates whether this Data Stream is valid or not.
     When invalid - all counters are irrelevant."
    ::= { dsx1DataStreamStatEntry 3 }
dsx1DataStreamStatInFrames OBJECT-TYPE
      SYNTAX  Counter32  
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
	  "The counter associated with the number of received frames,
	   encountered by the DS1 Data Stream."
      ::= { dsx1DataStreamStatEntry 4 }
dsx1DataStreamStatInBytes OBJECT-TYPE
      SYNTAX  Counter32  
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
	  "The counter associated with the number of received bytes,
	   encountered by the DS1 Data Stream."
      ::= { dsx1DataStreamStatEntry 5 }
dsx1DataStreamStatInDiscards OBJECT-TYPE
      SYNTAX  Counter32  
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
	  "The counter associated with the number of Discarded incoming frames,
	   encountered by the DS1 Data Stream."
      ::= { dsx1DataStreamStatEntry 6 }
dsx1DataStreamStatInErrors OBJECT-TYPE
      SYNTAX  Counter32  
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
	  "The counter associated with the number of received Errored frames,
	   encountered by the DS1 Data Stream."
      ::= { dsx1DataStreamStatEntry 7 }
dsx1DataStreamStatOutFrames OBJECT-TYPE
      SYNTAX  Counter32  
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
	  "The counter associated with the number of transmitted frames,
	   encountered by the DS1 Data Stream."
      ::= { dsx1DataStreamStatEntry 8 }
dsx1DataStreamStatOutBytes OBJECT-TYPE
      SYNTAX  Counter32  
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
	  "The counter associated with the number of transmitted bytes,
	   encountered by the DS1 Data Stream."
      ::= { dsx1DataStreamStatEntry 9 }
dsx1DataStreamStatOutDiscards OBJECT-TYPE
      SYNTAX  Counter32  
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
	  "The counter associated with the number of Discarded outgoing frames,
	   encountered by the DS1 Data Stream."
      ::= { dsx1DataStreamStatEntry 10 }
--   Extension to the DS1 Configuration Table
dsx1XConfigTable  OBJECT-TYPE
       SYNTAX      SEQUENCE OF Dsx1XConfigEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               " An extension to the DS1 Configuration table."
       ::= { ds1Interface 2 }
dsx1XConfigEntry OBJECT-TYPE
       SYNTAX  Dsx1XConfigEntry 
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           "An entry containing additional configuration
           parameters."
 --      AUGMENTS    { dsx1ConfigTable }
         INDEX   { dsx1LineIndex }
       ::= { dsx1XConfigTable 1 }
Dsx1XConfigEntry      ::=
       SEQUENCE {
         dsx1IdleCode		    	Integer32,
         dsx1LineMode		    	INTEGER,
         dsx1dBTxGain     			INTEGER,
         dsx1RxSensitivity			INTEGER,
         dsx1RestoreTime			INTEGER,
         dsx1TcFirstSignal			Integer32,
         dsx1TcSignal   			Integer32,
         dsx1TcPattern     			Integer32,
         dsx1Scramble     			INTEGER,
         dsx1LineAdaptiveTimingMode INTEGER,
		 dsx1TxClockSource          INTEGER,
		 dsx1AisEnable				INTEGER,
		 dsx1TsEchoCancel			OCTET STRING,
		 dsx1EchoCancelerModule     INTEGER,
         dsx1PortFunction 		    INTEGER,
		 dsx1PortMultiplier			INTEGER,
		 dsx1LeasedLine				INTEGER,	
		 dsx1CsuLoop				INTEGER,
		 dsx1ClockSource			Integer32,
		 dsx1OosSignal				INTEGER
       }
dsx1IdleCode OBJECT-TYPE
         SYNTAX  Integer32
         MAX-ACCESS   read-write
         STATUS  current
         DESCRIPTION
	     "Byte pattern of the data received/transmitted in the 
	      E1T1 framer idle timeslots.
	      Valid range: (0 - FF HEX)."
         ::= { dsx1XConfigEntry 1 }
dsx1LineMode OBJECT-TYPE
          SYNTAX  INTEGER { 
          csu(1),
          dsu(2)
          }
          MAX-ACCESS  read-write
          STATUS  current
          DESCRIPTION
                  "T1 device operation mode. 
                   Valid for T1 only."
          ::= { dsx1XConfigEntry 2 }
dsx1dBTxGain OBJECT-TYPE
         SYNTAX  INTEGER { 
         notApplicable (1),
         neg75dB       (2),
         neg15dB       (3),
         neg225dB      (4),
		 zerodB	       (5)
         }
         MAX-ACCESS  read-write
         STATUS  current
         DESCRIPTION
                 "Transmit line Gain for T1 CSU line mode."
         ::= { dsx1XConfigEntry 3 }
dsx1RxSensitivity OBJECT-TYPE
        SYNTAX  INTEGER { 
		notApplicable  (1),
        neg10dB        (2),	--Long Haul
        neg32dB        (3)	--Short Haul
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "Determine the maximum attenuation of the 
         receive signal that can be compensated for 
         by the interface receive path. Not applicable for T1."
        ::= { dsx1XConfigEntry 4 }
dsx1RestoreTime OBJECT-TYPE
        SYNTAX  INTEGER { 
        other(1),
        sec1(2),
        sec10(3),
		immediate(4)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "Used to change the sync. algorithms to reduce the time 
         required for the port to return to normal operation after 
         a RED alarm.
         'sec1' = Fast,
         'sec10' = TR-6211,
		 'immediate' = CCITT"
        ::= { dsx1XConfigEntry 5 }
dsx1TcFirstSignal OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "Trunk conditioning signal - value to be sent as a signal
         during the first 2.5 seconds after alarm detection.
		 Range is 0x0..0xF. 0xFF is a NULL value. 
		 This variable is used also for Space Signaling Code (in this case 
		 0xFF is not NULL)."
        ::= { dsx1XConfigEntry 6 }
dsx1TcSignal OBJECT-TYPE
        SYNTAX  Integer32 
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "Trunk conditioning signal value after alarm detection. 
         Range is 0x1..0xF for E1, and 0x0..0xF for T1.
         This variable is used also for Space Signaling Code (E1 and T1)."
        ::= { dsx1XConfigEntry 7 }
dsx1TcPattern OBJECT-TYPE
       SYNTAX  Integer32
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "Trunk conditioning data pattern to be sent upon a DS0 fail.
	  	Range is 0x0..0xFF. 
	  	This variable used also for Out of Service Code."
       ::= { dsx1XConfigEntry 8 }
dsx1Scramble  OBJECT-TYPE
       SYNTAX  INTEGER { 
       notApplicable (1),
       notActive     (2),
       active        (3)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "Scrambling is an operation that randomizes the bits 
        of the payload of the ATM cell by a polynom.
        This operation helps with the error detection mechanism
        of the HEC. Not applicable for E1.
        active - will scramble/descramble the payload ATM cell
        notActive - will not scramble/descramble. "
       ::= { dsx1XConfigEntry 9 }
dsx1LineAdaptiveTimingMode OBJECT-TYPE
       SYNTAX  INTEGER {
       off(1),
       on(2)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "Enables end to end clock synchronization.
        Default value - off."
       ::= { dsx1XConfigEntry 10 }
dsx1TxClockSource OBJECT-TYPE
       SYNTAX  INTEGER {
       loopTiming(1),
       localTiming(2),
       throughTiming(3),
	   adaptive(4)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "The source of Transmit Clock.
        'loopTiming' indicates that the recovered receive clock 
         is used as the transmit clock.
        'localTiming' indicates that a local clock
         source is used or when an external clock is
         attached to the box containing the interface.
        'throughTiming' indicates that recovered receive clock 
         from another interface is used as the transmit clock.
        'adaptive' indicates that the clock is recovered according
         to the received data flow rate. "
       ::= { dsx1XConfigEntry 11 }
dsx1AisEnable  OBJECT-TYPE
       SYNTAX  INTEGER {
       notApplicable(1),
       disable(2),
       enable(3)
       }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected)."
       ::= { dsx1XConfigEntry 12 }
dsx1TsEchoCancel OBJECT-TYPE
       SYNTAX OCTET STRING  (SIZE (4))
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "This parameter defines for each TS whether Echo-Cancellation is on.
	  	Each bit represents one TS as follow:
		First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octet bit'0' = TS#9,.., 
		4th octet bit'7' = TS#32.
		Octets and bits order is from left to right:
		[31,30,..24]      [23..16]    [15..8]      [7..0]
		MSB       LSB 	 MSB	LSB	 MSB   LSB	  MSB	LSB
	  	For each bit values are:
         0 - Echo-Cancellation off.
         1 - Echo-Cancellation on."
       ::= { dsx1XConfigEntry 13 }
dsx1EchoCancelerModule OBJECT-TYPE
       SYNTAX  INTEGER { 
       notExist(2),
       exist(3)
       }
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
       "This parameter indicates whether echo-cancellation module
        exists for this line."
       ::= { dsx1XConfigEntry 14 }
dsx1PortFunction OBJECT-TYPE
       SYNTAX  INTEGER { 
	    notApplicable (1),	
	  	uni (2),
	  	ces (3),
	  	ima (4)
	    }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "This object determines the ATM Mode over the 
        physical port.
        uni - The port will function as an ATM UNI.  
        ces - The port will function as a CES.
        ima - The port will function as an IMA-ATM."
       ::= { dsx1XConfigEntry 15 }
dsx1PortMultiplier OBJECT-TYPE
       SYNTAX  INTEGER { 
	    notApplicable (1),	
	  	r56 (2),
	  	r64 (3)
	    }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "This object determines the data rate of each TS 
        (Kbps units). 
        This parameter is applicable for T1 only."
       ::= { dsx1XConfigEntry 16 }
dsx1LeasedLine OBJECT-TYPE
       SYNTAX  INTEGER { 
	    notApplicable (1),	
	  	disable (2),
	  	enable (3)
	    }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "This parameter defines whether Line mode is regular (non Leased Line mode) 
       or transparent (Leased Line mode)."
       ::= { dsx1XConfigEntry 17 }
dsx1CsuLoop OBJECT-TYPE
       SYNTAX  INTEGER { 
	    notApplicable	(1),
       local	  	    (2),
	   transparent		(3)	    }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       "This parameter defines whether CSU loop will be done locally (by IPmux)
        or will be transferred to the TDM device."
       ::= { dsx1XConfigEntry 18 }
dsx1ClockSource OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
    "This entry specifies the source from which the clock will be taken.
	 Refer to device specification for source Index"      
      ::= { dsx1XConfigEntry 19 }
dsx1OosSignal OBJECT-TYPE
       SYNTAX  INTEGER { 
	    notApplicable	(1),
        space    		(2),
	    mark	 		(3),
	    spaceMark		(4),
	    markSpace		(5)	   
	   					 }
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
       " This parameter defines the value to be sent as a signal
         after alarm detection:
         'Space' = both A and B signaling bits are forced
                      to '0' during out-of-service periods.
		 'Mark' = both A and B signaling bits are forced
                      to '1' during out-of-service periods.
         'spaceMark' = A and B bits are forced to '0' for
                      2.5 seconds; then they are switched to '1'
                      until out-of-service condition disappears.
         'markSpace' = A and B bits are forced to '1' for
                      2.5 seconds; then they are switched to '0'
                      until out-of-service condition disappears.
       - '0'= 0 for T1, 1 for E1, or user defined value for Space                         
       - '1'= 1 for T1, 0 for E1, or user defined value for Mark."
       ::= { dsx1XConfigEntry 20 }
--NOTIFICATIONs 
-- ALARM TRAPS
-- USER E1 LOCAL MULTIFRAME ALARM
ds1LocalMultiframeAlarmTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, ifAlias}  
      STATUS  current
      DESCRIPTION
	    "This trap indicates near end (Local) Loss of 
      Multiframe Alignment, of the user E1 interface." 
      ::= { prtDS1Events  1 }
-- USER E1 REMOTE MULTIFRAME ALARM
ds1RemoteMultiframeAlarmTrap	  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, ifAlias}  
      STATUS  current
      DESCRIPTION
	    "This trap indicates that the far end (remote) unit, 
      connected to the user E1 interface, reports
      Loss of Multiframe Alignment."
      ::= { prtDS1Events  2 }
-- USER DS1 LINK FRAME SLIP
ds1LinkFrameSlipTrap	  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that a Frame Slip occurred at the user 
      DS1 interface. This usually indicates timing problems 
      (incorrect selection of timing reference), 
       on the user DS1 link."
      ::= { prtDS1Events  3 }
-- USER DS1 BPV ERROR
ds1BpvErrorTrap	NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates a Bipolar Violation (BPV)
      error has been detected at the user DS1 interface."
      ::= { prtDS1Events  4 }
-- USER DS1 EXCESSIVE BPV
ds1ExcessiveBpvTrap	NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates excessive number of 
      Bipolar Violation errors  (BPV)
      detected by the user DS1 interface"
      ::= { prtDS1Events  5 }
-- USER DS1 CRC-4 ERROR
ds1Crc4ErrorTrap	 NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, ifAlias}  
      STATUS  current
      DESCRIPTION
	    "This trap indicates that a frame with CRC-4 error has been
      detected at the user DS1 interface."
      ::= { prtDS1Events  6 }
-- USER DS1 EXCESSIVE ERROR RATIO
ds1ExcessiveErrorRatioTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	    "This trap indicates that the error rate, detected 
      at the user DS1 interface, on the frame synchronization bits
      is high, as defined by ITU-T Rec. G.732."
     ::= { prtDS1Events  7 }
-- USER DS1 REMOTE SYNC LOSS
ds1RemoteSyncLossTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that the far-end (remote)
      unit, connected to user DS1 interface,
      reports Loss of Frame Alignment (Sync Loss)."
      ::= { prtDS1Events  8 }
-- USER DS1 LOCAL SYNC LOSS
ds1LocalSyncLossTrap NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates near end (Local) 
      Loss of Frame Alignment failure (Sync Loss), 
      of the user DS1 interface"
      ::= { prtDS1Events  9 }
-- USER DS1 AIS SYNC LOSS
ds1AisSyncLossTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, ifAlias}  
      STATUS  current
      DESCRIPTION
      "This trap indicates near end (Local) 
      Loss of Frame Alignment (Sync Loss), caused by the reception
      of AIS at the user DS1 interface."
      ::= { prtDS1Events  10 }
-- USER DS1 AIS
ds1AisTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates AIS  being received
      at the user DS1 interface."
      ::= { prtDS1Events  11 }
-- NETWORK REMOTE LOOP
 ds1NetworkRemoteLoopTrap NOTIFICATION-TYPE
       OBJECTS  {alarmSeverity, alarmState, ifAlias}  
       STATUS  current
       DESCRIPTION
       "This trap indicates that a remote loopback
       has been activated, on the local uplink interface."
       ::= { prtDS1Events  12 }
-- USER SIDE REMOTE LOOP
ds1RemoteLoopTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that a remote loopback 
      has been activated, on the local user port."
      ::= { prtDS1Events  13 }
-- USER SIDE LOCAL LOOP
ds1LocalLoopTrap	NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that a local loopback 
      has been activated on the user port."
      ::= { prtDS1Events  14 }	
-- DS1 EXCESSIVE FRAME SLIP
ds1ExcessiveFrameSlipTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that the number of Frame Slips
      detected at the user DS1 interface, during the last minute
      exceeds threshold. For LA-110, threshold value is 10.
      This usually indicates timing problems 
      (incorrect selection of timing reference) on the user DS1."
      ::= { prtDS1Events  15 }
-- USER DS1 EXCESSIVE CRC 4 ERROR
ds1ExcessiveCrc4ErrorTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that the error rate 
      detected on the CRC-4 bits at the
      user DS1 interface, is high."
      ::= { prtDS1Events  16 }
-- USER E1 EXCESSIVE LOCAL MULTIFRAME ALARM
ds1ExcessiveLocalMfAlarmTrap	 NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	     "This trap indicates that the number of local
      Loss of Multiframe Alignment events, detected at
      the user E1 interface during the last minute exceeds threshold. 
      For LA-110, threshold value is 10."
      ::= { prtDS1Events  17 }
-- USER E1 EXCESSIVE REMOTE MULTIFRAME ALARM
ds1ExcessiveRemoteMfAlarmTrap  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that the number of 
      Loss of multiframe alignment events reported
      by the remote unit connected to the user 
      E1 interface during the last minute exceeds threshold. 
      For LA-110, threshold value is 10."
      ::= { prtDS1Events  18 }
-- USER DS1 EXCESSIVE REMOTE SYNC LOSS
ds1ExcessiveRemoteSyncLossTrap	  NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that the number of far end 
      (remote) Loss of Synchronization alarms,
      reported by the user DS1 interface 
      during the last minute, exceeds threshold. 
      For LA-110, threshold value is 10."
      ::= { prtDS1Events  19 }
-- USER DS1 EXCESSIVE LOCAL SYNC LOSS
ds1ExcessiveLocalSyncLossTrap	 NOTIFICATION-TYPE
      OBJECTS  {alarmSeverity, alarmState, ifAlias}  
      STATUS  current
      DESCRIPTION
	  "This trap indicates that the number of 
      Loss of local Synchronization alarms  
      reported by the user DS1 interface 
      during the last minute, exceeds threshold. 
      For LA-110, threshold value is 10."
      ::= { prtDS1Events  20 }
END