------------------------------------------------------- -- Copyright 1999 - Sun Microsystems, Inc. All Rights Reserved. -- -- ------------------------------------------------------- -- Sun Management Center ------------------------------------------------------- PROCESS-MONITOR-SUNMANAGEMENTCENTER-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI OBJECT-GROUP FROM SNMPv2-CONF DisplayString, RowStatus FROM SNMPv2-TC; processMonitor MODULE-IDENTITY LAST-UPDATED "9908031020Z" ORGANIZATION "Sun Microsystems Inc." CONTACT-INFO " Sun Microsystems Inc. Customer Support Postal: 901 San Antonio Road Palo Alto, CA-94303-4900 USA Tel: 650-960-1300 E-mail: service@sun.com" DESCRIPTION "The process monitoring allows to monitor the health of one or more processes running on the local host. SNMPv2 uses the term 'context' for the MIBs that can have multiple instances running on the Agent. If you are using a SNMPv2 based thirdparty management station to communicate with such an agent, then make sure that you are using the right context information. However, if you are using SNMPv1 based management station, then add the context information to the SNMP community as follows ':' This will enable you to access data from multiple instances of the same module running on an agent." REVISION "9908031020Z" DESCRIPTION "Rev 1.0 3rd august 1999 10:20, Initial version Of MIB." ::= { modules 20 } sun OBJECT IDENTIFIER ::= { enterprises 42 } prod OBJECT IDENTIFIER ::= { sun 2 } sunsymon OBJECT IDENTIFIER ::= { prod 12 } agent OBJECT IDENTIFIER ::= { sunsymon 2 } modules OBJECT IDENTIFIER ::= { agent 2 } pmProcstatsGroup OBJECT-GROUP OBJECTS { pmRowStatus, pmProcEntryName, pmProcCommandNameRX, pmProcArgumentRX, pmProcUIDspec, pmProcEntryDesc, pmProcMonitoringState, pmProcCommandName, pmProcPctCPUTime, pmProcSize, pmProcRSS, pmProcCount, pmAcctProcName, pmAcctProcCpuwaittime, pmAcctTextpftime, pmAcctDatapftime, pmAcctMajfaults, pmAcctCharios, pmAcctIcontexts, pmAcctChildtime, pmAcctUserlocktime, pmAcctTraptime, pmAcctTotalswaps, pmAcctDesc, pmAcctProcrule1, pmAcctProcrule2 } STATUS current DESCRIPTION "Processes related statistics." ::= { processMonitor 1 } pmProcTable OBJECT-TYPE SYNTAX SEQUENCE OF PmProcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of entries having information about a group of processes." ::= { pmProcstatsGroup 1 } pmProcAcctTable OBJECT-TYPE SYNTAX PmProcAcctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of entries having accounting information about processes." ::= { pmProcstatsGroup 2 } pmProcEntry OBJECT-TYPE SYNTAX PmProcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a group of processes." INDEX { pmProcEntryName } ::= { pmProcTable 1 } pmProcAcctEntry OBJECT-TYPE SYNTAX PmProcAcctEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about processes." INDEX { pmProcEntryName } ::= { pmProcAcctTable 1 } PmProcEntry ::= SEQUENCE { pmRowStatus RowStatus, pmProcEntryName DisplayString, pmProcCommandNameRX DisplayString, pmProcArgumentRX DisplayString, pmProcUIDspec DisplayString, pmProcEntryDesc DisplayString, pmProcMonitoringState DisplayString, pmProcCommandName DisplayString, pmProcPctCPUTime DisplayString, pmProcSize Integer32, pmProcRSS Integer32, pmProcCount Integer32, pmSystemTime DisplayString, pmUserTime DisplayString } PmProcAcctEntry ::= SEQUENCE { pmAcctProcName DisplayString, pmAcctProcCpuwaittime DisplayString, pmAcctTextpftime DisplayString, pmAcctDatapftime DisplayString, pmAcctMajfaults DisplayString, pmAcctCharios DisplayString, pmAcctIcontexts DisplayString, pmAcctChildtime DisplayString, pmAcctUserlocktime DisplayString, pmAcctTraptime DisplayString, pmAcctTotalswaps DisplayString, pmAcctDesc DisplayString, pmAcctProcrule1 DisplayString, pmAcctProcrule2 DisplayString } pmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status." ::= { pmProcEntry 1 } pmProcEntryName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The process entry name that is unique within the table. This name represents process(es) grouped depending upon process user id and regular expressions for process command name adn process argument." ::= { pmProcEntry 2 } pmProcCommandNameRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The process command name regular expression pattern. This is used as a filter expression and the proceses having command name matching this expression are selected." ::= { pmProcEntry 3 } pmProcArgumentRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The process argument regular expression pattern. This is used as a filter expression and the proceses having argument matching this expression are selected." ::= { pmProcEntry 4 } pmProcUIDspec OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User ID of the process." ::= { pmProcEntry 5 } pmProcEntryDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The description of the process entry." ::= { pmProcEntry 6 } pmProcMonitoringState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The monitoring state of the entry. The value is ON when the row entry is enabled and OFF when the row entry is disabled." ::= { pmProcEntry 7 } pmProcCommandName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The process command name." ::= { pmProcEntry 8 } pmProcPctCPUTime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The percent CPU used by all the processes in this group." ::= { pmProcEntry 9 } pmProcSize OBJECT-TYPE SYNTAX Integer32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The total size of all the processes in this group." ::= { pmProcEntry 10 } pmProcRSS OBJECT-TYPE SYNTAX Integer32 UNITS "KB" MAX-ACCESS read-only STATUS current DESCRIPTION "The resident size of all the processes in this group." ::= { pmProcEntry 11 } pmProcCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of the processes in this group." ::= { pmProcEntry 12 } pmSystemTime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The percent CPU used by the processes doing system calls." ::= { pmProcEntry 13 } pmUserTime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "The percent CPU used by the processes doing user level operations." ::= { pmProcEntry 14 } pmAcctProcName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the entry" ::= { pmProcAcctEntry 1 } pmAcctProcCpuwaittime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "CPU wait time" ::= { pmProcAcctEntry 2 } pmAcctTextpftime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Text page fault sleep time" ::= { pmProcAcctEntry 3 } pmAcctDatapftime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Data page fault sleep time" ::= { pmProcAcctEntry 4 } pmAcctMajfaults OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Major page faults" ::= { pmProcAcctEntry 5 } pmAcctCharios OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Characters read and written" ::= { pmProcAcctEntry 6 } pmAcctIcontexts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Involuntary context switches" ::= { pmProcAcctEntry 7 } pmAcctChildtime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "CPU time for reaped children" ::= { pmProcAcctEntry 8 } pmAcctUserlocktime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "User lock time" ::= { pmProcAcctEntry 9 } pmAcctTraptime OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "System trap time" ::= { pmProcAcctEntry 10 } pmAcctTotalswaps OBJECT-TYPE SYNTAX DisplayString UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Total swaps" ::= { pmProcAcctEntry 11 } pmAcctDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The description of the entry" ::= { pmProcAcctEntry 12 } pmAcctProcrule1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Memory shortage Rule" ::= { pmProcAcctEntry 13 } pmAcctProcrule2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "File access rule" ::= { pmProcAcctEntry 14 } END