PEA-LINE-MIRRORING-IPDSLAM DEFINITIONS ::= BEGIN


IMPORTS
    peaIpDslam
       FROM DIESEL-SMI

    lineIndex
       FROM PEA-BRIDGE-IPDSLAM
       
    MODULE-IDENTITY, Unsigned32, OBJECT-TYPE
        FROM SNMPv2-SMI;
        
peaLineMirroringIpDslam MODULE-IDENTITY
    LAST-UPDATED 
   		 "200602271200Z"  
    ORGANIZATION
		 "Ericsson Diax A/S - Denmark"
    CONTACT-INFO
		 "
		 Ericsson Diax A/S
		 Faelledvej 17
		 DK-7600 Struer
		 Denmark
		 
		 E-mail: support@dxd.ericsson.se
		 "       
   DESCRIPTION
		 "
         This MIB is used to configure end-user line mirroring in the IP DSLAM.
         
         When upstream and downstream traffic mirroring is enabled, all traffic from
         an end-user line is replicated, tagged with an operator specified VLAN
         tag and sent on the IP DSLAM's uplink interface, as illustrated below.

                                  IP DSLAM
                     _____________________________________
                    |                                     |
                    |         Service VLAN                |
                    | -------------------------->-------->|----------> End-user
            uplink  |/                            )       |
          <-------->|                            /        |
                    |\   Downstream Mirror VLAN /         |
                    | \<------------------------          |
                    |_____________________________________|


                                  IP DSLAM
                     _____________________________________
                    |                                     |
                    |         Service VLAN                |
                    | <-----------------------------<-----|<---------- End-user
            uplink  |/                            /       |
          <-------->|                            /        |
                    |\     Upstream Mirror VLAN /         |
                    | \<------------------------          |
                    |_____________________________________|

         Different VLANs can be used for upstream and downstream traffic mirroring,
         but the same VLAN may be used for both traffic directions. It is also
         possible to only mirror traffic in one direction, or to start mirroring on
         more than one line.

         The traffic mirroring function will not interfere with the normal services
         as long as the VLAN used for traffic mirroring is not used for services.
         If a mirror VLAN collides with a service VLAN, the behavior is undefined.
		 "                                                           
    ::= {peaIpDslam 90 }

lineMirroringTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF LineMirroringEntry
  	MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "The lineMirroringTable is used to configure traffic mirroring for the
     end-user lines in the IP DSLAM.
    "
    ::= { peaLineMirroringIpDslam 5 }   
        
lineMirroringEntry	OBJECT-TYPE
	SYNTAX      LineMirroringEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "lineMirroringEntry is an entry in the lineMirroringTable.

     A lineMirroringEntry is used to configure line mirroring for one line
     in the IP DSLAM. The line to configure is identified by lineIndex.
    "
    INDEX  {lineIndex}
    ::= { lineMirroringTable 5 }

LineMirroringEntry ::= 
	SEQUENCE {
        upstreamLineMirrorVlanId					Unsigned32,
        upstreamLineMirrorVlanPriority				Unsigned32,
        downstreamLineMirrorVlanId					Unsigned32,
        downstreamLineMirrorVlanPriority			Unsigned32
        } 
                

upstreamLineMirrorVlanId OBJECT-TYPE
	SYNTAX      Unsigned32 ('0000'H..'0FFF'H | 'FFFF'H)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The parameter upstreamLineMirrorVlanId is used to enable/disable mirroring
     of all upstream traffic on the specific line.
     When mirroring is enabled, upstream traffic from all PVC's in the line is
     replicated (before service VLAN tag is added) and tagged with the VLAN
     specified with upstreamLineMirrorVlanId. The traffic is then forwarded on
     the uplink interface of the IP DSLAM.

     To enable upstream traffic mirroring for a line, set upstreamLineMirrorVlanId
     to a value in the range 0x0000..0x0FFF, to disable upstream traffic mirroring
     set upstreamLineMirrorVlanId to 0xFFFF.

     The value configured with upstreamLineMirrorVlanId will survive a restart of
     the IP DSLAM.
    "
    DEFVAL {'FFFF'H}
    ::= { lineMirroringEntry 5 } 

upstreamLineMirrorVlanPriority OBJECT-TYPE
	SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The parameter upstreamLineMirrorVlanPriority is used in conjunction with
     upstreamLineMirrorVlanId when upstream traffic mirroring is enabled.
     upstreamLineMirrorVlanPriority specifies the VLAN priority used when
     sending the mirrored traffic on the IP DSLAM uplink interface.
     
     The value configured with upstreamLineMirrorVlanPriority will survive a
     restart of the IP DSLAM.
    "
    DEFVAL {6}
    ::= { lineMirroringEntry 10 } 
    
downstreamLineMirrorVlanId OBJECT-TYPE
	SYNTAX      Unsigned32 ('0000'H..'0FFF'H | 'FFFF'H)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The parameter downstreamLineMirrorVlanId is used to enable/disable mirroring
     of all downstream traffic on the specific line.
     When mirroring is enabled, downstream traffic to all PVC's in the line is
     replicated (after service VLAN tag is removed) and tagged with the VLAN
     specified with downstreamLineMirrorVlanId. The traffic is then forwarded on
     the uplink interface of the IP DSLAM.

     To enable downstream traffic mirroring for a line, set downstreamLineMirrorVlanId
     to a value in the range 0x0000..0x0FFF, to disable upstream traffic mirroring,
     set downstreamLineMirrorVlanId to 0xFFFF.

     The value configured with downstreamLineMirrorVlanId will survive a restart of
     the IP DSLAM.
    "
    DEFVAL {'FFFF'H}
    ::= { lineMirroringEntry 15 } 

downstreamLineMirrorVlanPriority OBJECT-TYPE
	SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
    "The parameter downstreamLineMirrorVlanPriority is used in conjunction with
     downstreamLineMirrorVlanId when upstream traffic mirroring is enabled.
     downstreamLineMirrorVlanPriority specifies the VLAN priority used when
     sending the mirrored traffic on the IP DSLAM uplink interface.
     
     The value configured with downstreamLineMirrorVlanPriority will survive a
     restart of the IP DSLAM.
    "
    DEFVAL {6}
    ::= { lineMirroringEntry 20 } 
    
END