PANDATEL-GMSF-MODEM-MIB DEFINITIONS ::= BEGIN -- This is the private mib group section for the GM-SF modems. -- Because these modems must be installed in the PANDATEL modem rack -- the PANDATEL-MODEM-MIB also applies. -- Ver.1.01 Sep.13.1999 IMPORTS enterprises, Gauge FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 mdmSpecifics, device-id FROM PANDATEL-MODEM-MIB; -- ********************** THE MDM-GMSF SUBTREE ****************************** -- the specific identifier is identical to the modem type integer -- of the GM-F modem entries in the PANDATEL-MODEM-MIB mdmModemTable. gmsf-modem OBJECT IDENTIFIER ::= { device-id 205 } -- chassis-mib gmsf OBJECT IDENTIFIER ::= { mdmSpecifics 205 } -- this subtree gmsfModemTable OBJECT-TYPE SYNTAX SEQUENCE OF GmsfTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about all GM-F converters in all racks." ::= { gmsf 1 } gmsfTableEntry OBJECT-TYPE SYNTAX GmsfTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the table." INDEX { mdmRack, mdmModem, mdmPosition } ::= { gmsfModemTable 1 } GmsfTableEntry ::= SEQUENCE { mdmRack INTEGER, mdmModem INTEGER, mdmPosition INTEGER, mdmModemName DisplayString, mdmInterfaceEmulationMode INTEGER, mdmModemProperty INTEGER, mdmHDSLUnit INTEGER, mdmClockSystem INTEGER, mdmClockSource INTEGER, mdmDataRate INTEGER, mdmStartTimeslot INTEGER, mdmTimeslotSize INTEGER, mdmTimeslot16 INTEGER, mdmCRC4Generation INTEGER, mdmFramingMode INTEGER, mdmScrambler INTEGER, mdmRemoteAccessMode INTEGER, mdmCRC6Test INTEGER, mdmCRC6Status INTEGER, mdmCRC6Error Gauge } mdmRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the rack where the converter is installed." ::= { gmsfTableEntry 1 } mdmModem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This entry displays the slot number where the corresponding converter is installed in the rack." ::= { gmsfTableEntry 2 } mdmPosition OBJECT-TYPE SYNTAX INTEGER { local (1), remote (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry displays the location of the corresponding converter: 'local' or 'remote'. The converter which is plugged into a managed rack is 'local', the counterpart is 'remote'." ::= { gmsfTableEntry 3 } mdmModemName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The verbal name of this converter." ::= { gmsfTableEntry 5 } mdmInterfaceEmulationMode OBJECT-TYPE SYNTAX INTEGER { other (1), dte (2), dce (3), te (4), nt (5), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface mode of the unit: 'dte', 'dce', 'te' or 'nt'." ::= { gmsfTableEntry 6 } mdmModemProperty OBJECT-TYPE SYNTAX INTEGER { other (1), e1 (2), t1 (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry displays the speed class of the GM-F: 'e1' or 't1'." ::= { gmsfTableEntry 7 } mdmHDSLUnit OBJECT-TYPE SYNTAX INTEGER { other (1), ntu (2), ltu (3) } ACCESS read-write STATUS mandatory DESCRIPTION "HDSL unit type: Line Termination Unit (LTU) or Network Termination Unit (LTU)" ::= { gmsfTableEntry 10 } mdmClockSystem OBJECT-TYPE SYNTAX INTEGER { other (1), dual (2), single (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The clock system of the link: 'dual' or 'single'." ::= { gmsfTableEntry 23 } mdmClockSource OBJECT-TYPE SYNTAX INTEGER { other (1), internal (2), remote (3), external (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The clock source of the link: 'internal', 'external', or 'remote'." ::= { gmsfTableEntry 24 } mdmDataRate OBJECT-TYPE SYNTAX INTEGER { other (1) } ACCESS read-write STATUS mandatory DESCRIPTION "The data rate at the interface in bits per seconds. The data rate at the remote counterpart changes simultaneously. A data rate of 2.048 Mbps (E1) automatically disables CRC4, sets mdmStartTimeslot to 'unframed', enables time slot 16, and disables remote access. A data rate of 1.984 Mbps (E1) automatically sets mdmStartTimeslot to 'timeslot-1', enables time slot 16 and sets mdmRemoteAccessMode to 'via timeslot 0 sa4-bit'. A data rate of 1.544 Mbps (T1) automatically sets mdmStartTimeslot to 'unframed' and disables remote access." ::= { gmsfTableEntry 25 } mdmStartTimeslot OBJECT-TYPE SYNTAX INTEGER { timeslot-1 (1), timeslot-2 (2), timeslot-3 (3), timeslot-4 (4), timeslot-5 (5), timeslot-6 (6), timeslot-7 (7), timeslot-8 (8), timeslot-9 (9), timeslot-10 (10), timeslot-11 (11), timeslot-12 (12), timeslot-13 (13), timeslot-14 (14), timeslot-15 (15), timeslot-16 (16), timeslot-17 (17), timeslot-18 (18), timeslot-19 (19), timeslot-20 (20), timeslot-21 (21), timeslot-22 (22), timeslot-23 (23), timeslot-24 (24), timeslot-25 (25), timeslot-26 (26), timeslot-27 (27), timeslot-28 (28), timeslot-29 (29), timeslot-30 (30), timeslot-31 (31), unframed (98), other (99), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry determines the start time slot for framing. Start time slot and data rate must match. A start time slot which is too high will be ignored. The remote unit's configuration changes simultaneously." ::= { gmsfTableEntry 26 } mdmTimeslotSize OBJECT-TYPE SYNTAX INTEGER { other (1), nx64k (2), nx56k (3), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry determines the size of the time slots: 'nx64k' or 'nx56k'. 'nx56k' is valid for T1 units only. The remote unit's configuration changes simultaneously." ::= { gmsfTableEntry 27 } mdmTimeslot16 OBJECT-TYPE SYNTAX INTEGER { other (1), disable (2), enable (3), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry enables or disables time slot 16. If it is disabled, it will not be used for data transmission but for framing. Valid for E1 units only." ::= { gmsfTableEntry 40 } mdmCRC4Generation OBJECT-TYPE SYNTAX INTEGER { other (1), disable (2), enable (3), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry enables or disables the generation of a CRC4 check sum. Valid for E1 units only." ::= { gmsfTableEntry 41 } mdmFramingMode OBJECT-TYPE SYNTAX INTEGER { other (1), d4 (2), esf (3), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "The T1 framing mode: 'd4' or 'esf'. The remote unit's configuration changes simultaneously. Valid for T1 units only." ::= { gmsfTableEntry 50 } mdmScrambler OBJECT-TYPE SYNTAX INTEGER { other (1), disable (2), enable (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry enables or disables scrambling." ::= { gmsfTableEntry 63 } mdmRemoteAccessMode OBJECT-TYPE SYNTAX INTEGER { other (1), disable (2), via-next-free-timeslot (3), via-timeslot-0-Sa4-bit (4), via-hdsl-channel (7) } ACCESS read-write STATUS mandatory DESCRIPTION "The remote access mode: 'disable', 'via-next-free-timeslot', 'via-timeslot-0-Sa4-bit', or 'via-hdsl-channel'. The value 'via-next-free-timeslot' means that one time slot higher than the last data time slot is used for remote access. The value 'via-timeslot-0-Sa4-bit' means that the sa4-bit in time slot 0 is used for remote access The remote unit's configuration changes simultaneously." ::= { gmsfTableEntry 64 } mdmCRC6Test OBJECT-TYPE SYNTAX INTEGER { other (1), start (3), stop (4), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry enables the execution of a CRC6 test. Write requests with values other than 'start' or 'stop' will be rejected. Valid for T1 units only." ::= { gmsfTableEntry 100 } mdmCRC6Status OBJECT-TYPE SYNTAX INTEGER { other (1), never-started (2), running (5), stopped (6), start-failed (7), not-available (100) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry indicates the status of the CRC6 test. Valid for T1 units only." ::= { gmsfTableEntry 101 } mdmCRC6Error OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This entry indicates the number of errors detected during the last 60 seconds." ::= { gmsfTableEntry 102 } END