PANDATEL-FME-MODEM-MIB DEFINITIONS ::= BEGIN -- This is the private mib group section for the FM-E modems. -- Because these modems must be installed in the PANDATEL modem rack -- the PANDATEL-MODEM-MIB also applies. -- Ver.1.06 Sep.13.1999 IMPORTS enterprises FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 mdmSpecifics, device-id FROM PANDATEL-MODEM-MIB; -- ********************** THE MDM-FME SUBTREE ****************************** -- the specific identifier is identical to the modem type integer -- of the FM-E modem entries in the PANDATEL-MODEM-MIB mdmModemTable. fme-modem OBJECT IDENTIFIER ::= { device-id 601 } -- chassis-mib fme OBJECT IDENTIFIER ::= { mdmSpecifics 601 } -- this subtree fmeModemTable OBJECT-TYPE SYNTAX SEQUENCE OF FmeTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about all FME units within all stacks." ::= { fme 1 } fmeTableEntry OBJECT-TYPE SYNTAX FmeTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the table." INDEX { mdmRack, mdmModem, mdmPosition } ::= { fmeModemTable 1 } FmeTableEntry ::= SEQUENCE { mdmRack INTEGER, mdmModem INTEGER, mdmPosition INTEGER, mdmModemName DisplayString, mdmActiveLink INTEGER, mdmAlarmConditionPort7 INTEGER, mdmAlarmConditionPort8 INTEGER } mdmRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the stack the unit belongs to. The stack corresponds to a rack, the FME units correspond to rack mount cards installed in a rack." ::= { fmeTableEntry 1 } mdmModem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This entry displays the index of the FME unit. It corresponds with its position in the stack." ::= { fmeTableEntry 2 } mdmPosition OBJECT-TYPE SYNTAX INTEGER { local (1), remote (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry displays the location of the corresponding unit: 'local' or 'remote'. The unit which belongs to a managed stack is 'local', the counterpart is 'remote'." ::= { fmeTableEntry 3 } mdmModemName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The verbal name of this unit." ::= { fmeTableEntry 5 } mdmActiveLink OBJECT-TYPE SYNTAX INTEGER { line-port-7 (7), line-port-8 (8), disable (90) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry displays the line port that is receiving data." ::= { fmeTableEntry 12 } mdmAlarmConditionPort7 OBJECT-TYPE SYNTAX INTEGER { other (1), disable (2), no-link-signal (3), laser-fail (4), no-link-signal-or-laser-fail (5), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "The alarm trigger mode at port 7: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'no-link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective." ::= { fmeTableEntry 116 } mdmAlarmConditionPort8 OBJECT-TYPE SYNTAX INTEGER { other (1), disable (2), no-link-signal (3), laser-fail (4), no-link-signal-or-laser-fail (5), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "The alarm trigger mode at port 8: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'no-link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective." ::= { fmeTableEntry 117 } -- *********************** Port Table *********************************** fmePortTable OBJECT-TYPE SYNTAX SEQUENCE OF FmeTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about all I/F ports of the FME units within all stacks." ::= { fme 2 } fmePortEntry OBJECT-TYPE SYNTAX FmeTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The index of the table." INDEX { portRack, portModem, portPosition, portPort } ::= { fmePortTable 1 } FmePortEntry ::= SEQUENCE { portRack INTEGER, portModem INTEGER, portPosition INTEGER, portPort INTEGER, portInterfaceEmulationMode INTEGER, mdmModemProperty INTEGER, portClockSystem INTEGER, portClockSource INTEGER, portDataRate INTEGER, portLocalCarrierDetect INTEGER, portTDPhaseLocking INTEGER, portLineBuiltOut INTEGER } portRack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the stack the port belongs to." ::= { fmePortEntry 1 } portModem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the FME unit the port belongs to." ::= { fmePortEntry 2 } portPosition OBJECT-TYPE SYNTAX INTEGER { local (1), remote (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This entry displays the location of the corresponding port: 'local' or 'remote'. The port which belongs to a managed stack is 'local', the counterpart is 'remote'." ::= { fmePortEntry 3 } portPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the port." ::= { fmePortEntry 4 } portInterfaceEmulationMode OBJECT-TYPE SYNTAX INTEGER { other (1), dte (2), dce (3), te (4), nt (5), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Interface mode of the port: 'dte', 'dce', 'te', or 'nt'." ::= { fmePortEntry 6 } mdmModemProperty OBJECT-TYPE SYNTAX INTEGER { other (1), e1 (2), t1 (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The speed class of the port: 'e1' or 't1'." ::= { fmePortEntry 7 } portClockSystem OBJECT-TYPE SYNTAX INTEGER { other (1), dual (2), single (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The clock system at the interface port: 'single' or 'dual'. The available values depend on the interface type." ::= { fmePortEntry 23 } portClockSource OBJECT-TYPE SYNTAX INTEGER { other (1), internal (2), remote (3), external (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The clock source at the interface port: 'internal', 'remote', or 'external'." ::= { fmePortEntry 24 } portDataRate OBJECT-TYPE SYNTAX INTEGER { other (1) } ACCESS read-write STATUS mandatory DESCRIPTION "The data rate at the interface port in bits per seconds. The data rate at the remote counterpart changes simultaneously." ::= { fmePortEntry 25 } portLocalCarrierDetect OBJECT-TYPE SYNTAX INTEGER { other (1), fo-link-and-remote-handshake (2), fo-link (3), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "The data carrier detect mode at the interface: if set to 'fo-link-and-remote-handshake' the DCD signal (resp. I for X.21, etc.) follows link status and remote RTS (resp. C for X.21, etc.), if set to 'fo-link' the DCD signal follows link status only. Not available for units with G.703 onboard." ::= { fmePortEntry 60 } portTDPhaseLocking OBJECT-TYPE SYNTAX INTEGER { other (1), positive-clock-slope (2), negative-clock-slope (3), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "This entry defines the data phase locking for I/F data: 'positive-clock-slope' or 'negative-clock-slope'. For units with G.703 onboard the value 'positive-clock-slope' is valid only." ::= { fmePortEntry 67 } portLineBuiltOut OBJECT-TYPE SYNTAX INTEGER { other (1), itu-rec-g703 (2), dsx-1-0to133-ft (3), dsx-1-133to266-ft (4), dsx-1-266to399-ft (5), dsx-1-399to533-ft (6), dsx-1-533to655-ft (7), not-available (100) } ACCESS read-write STATUS mandatory DESCRIPTION "The G.703 transmission mode of the unit. Valid for units with G.703 onboard only." ::= { fmePortEntry 68 } END