--># --># Copyright (C) Siemens AG 1998 --># All rights reserved --># -->#protocol specification -->%PROTOCOL SNMP --># -->#configuration -->%REMCONFIG NO -->%REMOPERATION NO --># Omnis-Management-MIB DEFINITIONS ::= BEGIN -- -- Title: MIB for the BS2000 Omnis Management -- Date: Januar, 1997 -- Authors: Rudolph BS2000 DC3 -- -- Update am 28.7.1997 -- Transportparameter in Trace Gruppe hinzugefuegt -- -- Update am 09.10.1997 -- Objekte, die sich nur durch Gross-/Kleinschreibung unterscheiden -- modifiziert. -- -- Update am 21.10.1997 -- GlobalData Gruppe erweitert -- Neu Gruppe GlobalDataEntry erzeugt -- Author: Veges -- -- Update am 12.11.1997 -- sniOmnisGlobalData: Subagent Version wieder eingefuehrt -- Trap Nummerierung neu gemacht -- Author: Rudolph -- -- Update am 13.11.1997 -- sniOmnisGlobalData: SubagentVersion Name und Typ korrigiert -- Author: Veges -- -- Update am 19.1.1998 -- sniomnisTerminalInfo: Objekte SNMP, Trans-Prot, HardcopyForm -- hinzugefuegt -- sniomnisPartnerInfo: Objekte SNMP, Connect, Berid, pac-prefix -- hinzugefuegt -- Author: Rudolph -- -- Update am 20.1.1998 -- omnisGlobalDataActName und omnisGlobalDataActID auf read-write gesetzt -- -- -- Update am 06.02.1998 -- Beschreibung der einzelnen Objekte -- Author: Vaziri -- -- -- Update am 20.10.1998 -- Neue Objekte: omnisSettingsEnd, omnisSettingsEndPassw -- Auf read-write gesetzt: omnisOmnisState,omnisMuxState -- Korrigierte Konstantennamen fuer: omnisSettingsExitPri,omnisSettingsLoggPri -- Konstantenmenge mit ..._omnis erweitert fuer: -- omnisSettingsLine25,omnisTerminalInfoLine25,omnisPartnerInfoLine25 -- Author: Veges -- -- -- Update am 22.10.1998 -- Neue Traps: 309-314,320 -- Neue Gruppe:UserdefinedTraps,Neues Objekt:TrapMsgText -- Author: Veges -- -- -- MIB-Version: 1 IMPORTS TRAP-TYPE FROM RFC-1215 enterprises FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; sni OBJECT IDENTIFIER ::= { enterprises 231 } sniProductMibs OBJECT IDENTIFIER ::= { sni 2 } sniOmnis OBJECT IDENTIFIER ::= { sniProductMibs 31} sniOmnisGlobalData OBJECT IDENTIFIER ::= { sniOmnis 1 } sniOmnisSettings OBJECT IDENTIFIER ::= { sniOmnis 2 } sniOmnisParameters OBJECT IDENTIFIER ::= { sniOmnis 3 } sniOmnisTerminals OBJECT IDENTIFIER ::= { sniOmnis 4 } sniOmnisTerminalInfo OBJECT IDENTIFIER ::= { sniOmnis 5 } sniOmnisPartners OBJECT IDENTIFIER ::= { sniOmnis 6 } sniOmnisPartnerInfo OBJECT IDENTIFIER ::= { sniOmnis 7 } sniOmnisGroups OBJECT IDENTIFIER ::= { sniOmnis 8 } sniOmnisHardCopy OBJECT IDENTIFIER ::= { sniOmnis 9 } sniOmnisHardCopyPIDs OBJECT IDENTIFIER ::= { sniOmnis 10 } sniOmnisHardCopyTIDs OBJECT IDENTIFIER ::= { sniOmnis 11 } sniOmnisHardCopyCreate OBJECT IDENTIFIER ::= { sniOmnis 12 } sniOmnisOmnis OBJECT IDENTIFIER ::= { sniOmnis 13 } sniOmnisMux OBJECT IDENTIFIER ::= { sniOmnis 14 } sniOmnisExits OBJECT IDENTIFIER ::= { sniOmnis 15 } sniOmnisExitPIDs OBJECT IDENTIFIER ::= { sniOmnis 16 } sniOmnisExitTIDs OBJECT IDENTIFIER ::= { sniOmnis 17 } sniOmnisExitCreate OBJECT IDENTIFIER ::= { sniOmnis 18 } sniOmnisTrace OBJECT IDENTIFIER ::= { sniOmnis 19 } sniOmnisTraps OBJECT IDENTIFIER ::= { sniOmnis 20 } sniOmnisUserdefinedTraps OBJECT IDENTIFIER ::= { sniOmnis 21 } -------------------------------------------------------------- -- -- Globale OMNIS-Informationen -- -------------------------------------------------------------- omnisGlobalDataSubagentVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Version of OMNIS-Subagent" ::= {sniOmnisGlobalData 1} omnisGlobalDataTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of OMNISes" ::= {sniOmnisGlobalData 4} omnisGlobalDataActID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ID of the current OMNIS" ::= {sniOmnisGlobalData 5} omnisGlobalDataActName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of the current OMNIS" ::= {sniOmnisGlobalData 6} omnisGlobalDataTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisGlobalDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS GlobalData-Table" ::= {sniOmnisGlobalData 7} omnisGlobalDataEntry OBJECT-TYPE SYNTAX OmnisGlobalDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisGlobalDataOmnID} ::= {omnisGlobalDataTable 1} OmnisGlobalDataEntry ::= SEQUENCE { omnisGlobalDataOmnID INTEGER, omnisGlobalDataVersion DisplayString, omnisGlobalDataOmnName DisplayString, omnisGlobalDataState INTEGER } omnisGlobalDataOmnID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "OMNIS ID" ::= {omnisGlobalDataEntry 1} omnisGlobalDataVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "OMNIS version" ::= {omnisGlobalDataEntry 2} omnisGlobalDataOmnName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "OMNIS name" ::= {omnisGlobalDataEntry 3} omnisGlobalDataState OBJECT-TYPE SYNTAX INTEGER { open (1), close (2) } ACCESS read-write STATUS mandatory DESCRIPTION "OMNIS state" ::= {omnisGlobalDataEntry 4} -------------------------------------------------------------- -- -- Omnis Settings Table -- -- KDO: INF S,TYPE=Summary und INF S,TYPE=Settings -- -------------------------------------------------------------- omnisSettingsAppName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The NEA name of the OMNIS application" ::= {sniOmnisSettings 1} omnisSettingsAppNameISO OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The ISO name of the OMNIS application" ::= {sniOmnisSettings 2} omnisSettingsNumPartners OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The actual number of partners " ::= {sniOmnisSettings 3} omnisSettingsNumTerminals OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The actual number of terminals" ::= {sniOmnisSettings 4} omnisSettingsDSTMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximal number of DSTs " ::= {sniOmnisSettings 5} omnisSettingsPTNMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximal number of partners" ::= {sniOmnisSettings 6} omnisSettingsPACMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximal number of partners for one DST" ::= {sniOmnisSettings 7} omnisSettingsState OBJECT-TYPE SYNTAX INTEGER { open (1), close (2), end (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Subagent connected " ::= {sniOmnisSettings 8} omnisSettingsAPASS OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Administrator password " ::= {sniOmnisSettings 9} omnisSettingsHOLD OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), auto (4), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Hold the connection" ::= {sniOmnisSettings 10} omnisSettingsHcyForm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-write STATUS mandatory DESCRIPTION "formular of printer" ::= {sniOmnisSettings 11} omnisSettingsHCopy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "Route the output to a printer" ::= {sniOmnisSettings 12} omnisSettingsLogging OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Protocoling in logging file" ::= {sniOmnisSettings 13} omnisSettingsChangeLogging OBJECT-TYPE SYNTAX INTEGER { change (1), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Switch to a new logging file" ::= {sniOmnisSettings 14} omnisSettingsACK OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Acknowlegement required" ::= {sniOmnisSettings 15} omnisSettingsMTAB OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The report table" ::= {sniOmnisSettings 16} omnisSettingsEXIT OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The address code of EXIT" ::= {sniOmnisSettings 17 } omnisSettingsOpncon OBJECT-TYPE SYNTAX INTEGER { std (1), free (2), dcl (3), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The connect permission" ::= {sniOmnisSettings 18 } omnisSettingsBreakKey OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (98), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The K-key to produce a break on a $DIALOG-Parnter" ::= {sniOmnisSettings 19 } omnisSettingsCallKey OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (98), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The K-key for calling" ::= {sniOmnisSettings 20 } omnisSettingsCallInf OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Notify the call-state-information" ::= {sniOmnisSettings 21 } omnisSettingsPac OBJECT-TYPE SYNTAX INTEGER { line (1), prefix (2), no (3), std (4), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The address code of the partner" ::= {sniOmnisSettings 22 } omnisSettingsInputLog OBJECT-TYPE SYNTAX INTEGER { rec (1), send (2), both (3), std (4), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The protocol for the terminal input" ::= {sniOmnisSettings 23 } omnisSettingsOutputLog OBJECT-TYPE SYNTAX INTEGER { rec (1), send (2), both (3), std (4), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The protocol for the terminal output" ::= {sniOmnisSettings 24 } omnisSettingsLine25 OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), omnis (4), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Use the 25. display-line" ::= {sniOmnisSettings 25 } omnisSettingsDisMod OBJECT-TYPE SYNTAX INTEGER { system (1), omnis (2), mixed (3), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The display mode" ::= {sniOmnisSettings 26 } omnisSettingsKPAC OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (98), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "K-key to switch in command mode/to change the partner" ::= {sniOmnisSettings 27 } omnisSettingsExitPri OBJECT-TYPE SYNTAX INTEGER { par-opt-set (1), set-par-opt (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The priority for SET,PARAMETER and OPTION by EXIT" ::= {sniOmnisSettings 28 } omnisSettingsReply OBJECT-TYPE SYNTAX INTEGER { restricted (1), all (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION " Route Data to UCON-application" ::= {sniOmnisSettings 29 } omnisSettingsExitAuth OBJECT-TYPE SYNTAX INTEGER { all (1), adm (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The authorization for Exit-command" ::= {sniOmnisSettings 30 } omnisSettingsLoggPri OBJECT-TYPE SYNTAX INTEGER { par-opt-set (1), set-par-opt (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The priority for SET,PARAMETER and OPTION by Logging" ::= {sniOmnisSettings 31 } omnisSettingsAudit OBJECT-TYPE SYNTAX INTEGER { on (1), off (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "OMNIS-Audit" ::= {sniOmnisSettings 32 } omnisSettingsMDefAuth OBJECT-TYPE SYNTAX INTEGER { all (1), adm (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The authorization for MDEF-command" ::= {sniOmnisSettings 33 } omnisSettingsHoldPri OBJECT-TYPE SYNTAX INTEGER { set-opt (1), opt-set (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The priority for SET and OPTION by HOLD" ::= {sniOmnisSettings 34 } omnisSettingsInsave OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), f1 (21), f2 (22), f3 (23), f4 (24), f5 (25), f6 (26), f7 (27), f8 (28), f9 (29), f10 (30), f11 (31), f12 (32), f13 (33), f14 (34), f15 (35), f16 (36), f17 (37), f18 (38), f19 (39), f20 (40), f21 (41), f22 (42), f23 (43), f24 (44), no (97), std (98), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The saved key" ::= {sniOmnisSettings 35 } omnisSettingsOpnStart OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Start-sequence permited" ::= {sniOmnisSettings 36 } omnisSettingsExclPartner OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The exclusive partner" ::= {sniOmnisSettings 37 } omnisSettingsSave OBJECT-TYPE SYNTAX INTEGER { pkey (1), screen (2), all (3), no (4), std (5), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Saved after disconnect" ::= {sniOmnisSettings 38 } omnisSettingsMessageALL OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Message to all OMNIS users" ::= {sniOmnisSettings 39 } omnisSettingsMessageADM OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Message to OMNIS administrator" ::= {sniOmnisSettings 40 } omnisSettingsEnd OBJECT-TYPE SYNTAX INTEGER { end (1), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "End OMNIS-Session" ::= {sniOmnisSettings 41 } omnisSettingsEndPassw OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "OMNIS-Password for END Command" ::= {sniOmnisSettings 42 } -------------------------------------------------------------- -- -- Omnis Parameter Table -- -- KDO: INF S,TYPE=Parameters -- -------------------------------------------------------------- omnisParametersAppName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the OMNIS application" ::= {sniOmnisParameters 1} omnisParametersAppNameISO OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The ISO name of the OMNIS application" ::= {sniOmnisParameters 2} omnisParametersPrefix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "Prefix of standby application " ::= {sniOmnisParameters 3} omnisParametersProName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Processor name" ::= {sniOmnisParameters 4} omnisParametersVirtProName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The virtual processor name" ::= {sniOmnisParameters 5} omnisParametersLoggingFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..54)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of logging file " ::= {sniOmnisParameters 6} omnisParametersStartupFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..54)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of startup file " ::= {sniOmnisParameters 7} omnisParametersConfigFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..54)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of configuration file " ::= {sniOmnisParameters 8} ---------------------------------------------- -- -- KDO /Confupdate -- ---------------------------------------------- omnisParametersConfUpdate OBJECT-TYPE SYNTAX INTEGER { start (1) } ACCESS read-write STATUS mandatory DESCRIPTION "The object for CONFUPDATE command ( write only )" ::= {sniOmnisParameters 9} omnisParametersModulFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..54)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of module file" ::= {sniOmnisParameters 10} omnisParametersBulletinFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..54)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of bulletin file" ::= {sniOmnisParameters 11} omnisParametersTextFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..54)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of text file " ::= {sniOmnisParameters 12} omnisParametersPagePool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..54)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of PagePool File " ::= {sniOmnisParameters 13} omnisParametersIOAreaLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Length of IO Area " ::= {sniOmnisParameters 14} omnisParametersTWorkLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Length of Terminal Work Area " ::= {sniOmnisParameters 15} omnisParametersPWorkLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Length of Partner Work Area " ::= {sniOmnisParameters 16} omnisParametersTextKeyLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Length of textkey " ::= {sniOmnisParameters 17} omnisParametersSecurityLevel OBJECT-TYPE SYNTAX INTEGER { high (1), medium (2), low (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The security level" ::= {sniOmnisParameters 18} omnisParametersDCAMIntVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "The version of DCAM Interface" ::= {sniOmnisParameters 19} omnisParametersVTSUBVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "The version of local vtsu-b" ::= {sniOmnisParameters 20} omnisParametersVTSUCBVers OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "The version of local vtsucb " ::= {sniOmnisParameters 21} omnisParametersCMD OBJECT-TYPE SYNTAX DisplayString (SIZE(1..256)) ACCESS read-write STATUS mandatory DESCRIPTION "BS2000 command for OMNIS task " ::= {sniOmnisParameters 22 } omnisParametersDump OBJECT-TYPE SYNTAX INTEGER { start (1), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "/DUMP command " ::= {sniOmnisParameters 23 } omnisParametersDumpMsgNr OBJECT-TYPE SYNTAX DisplayString (SIZE(1..7)) ACCESS read-write STATUS mandatory DESCRIPTION "OMNIS message number " ::= {sniOmnisParameters 24 } omnisParametersDumpInsert OBJECT-TYPE SYNTAX DisplayString (SIZE(1..30)) ACCESS read-write STATUS mandatory DESCRIPTION "/DUMP command " ::= {sniOmnisParameters 25 } omnisParametersDumpInsertNr OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of Insert " ::= {sniOmnisParameters 26 } -------------------------------------------------------------- -- Omnis Terminal Table -- -- Kommando INF T,activ= all | activ | hold | inactiv -- -------------------------------------------------------------- omnisTerminalsStatus OBJECT-TYPE SYNTAX INTEGER { all (1), activ (2), -- default hold (3), inactiv (4) } ACCESS read-write STATUS mandatory DESCRIPTION "State-Flag for restriction in Show Table" ::= {sniOmnisTerminals 1} omnisTerminalsTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the table omnisTerminalsTable" ::= {sniOmnisTerminals 2} omnisTerminalsTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisTerminalsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS terminals table" ::= {sniOmnisTerminals 3} omnisTerminalsEntry OBJECT-TYPE SYNTAX OmnisTerminalsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisTerminalsTID } ::= {omnisTerminalsTable 1} OmnisTerminalsEntry ::= SEQUENCE { omnisTerminalsTID INTEGER, omnisTerminalsPtnName DisplayString, omnisTerminalsProName DisplayString, omnisTerminalsTyp INTEGER, omnisTerminalsState INTEGER, omnisTerminalsRoute INTEGER, omnisTerminalsKPAC INTEGER, omnisTerminalsUser DisplayString, omnisTerminalsMessage DisplayString } omnisTerminalsTID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Terminal ID " ::= {omnisTerminalsEntry 1} omnisTerminalsPtnName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Partner name" ::= {omnisTerminalsEntry 2} omnisTerminalsProName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Processor name" ::= {omnisTerminalsEntry 3} omnisTerminalsTyp OBJECT-TYPE SYNTAX INTEGER { term (1), appl (2), skp (3), cons (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Terminal type" ::= {omnisTerminalsEntry 4} omnisTerminalsState OBJECT-TYPE SYNTAX INTEGER { decl (1), opn (2), act (3), los (4), cls (5), hold (6), inact (7), cancel (8), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Terminal state / value cancel only for write " ::= {omnisTerminalsEntry 5 } omnisTerminalsRoute OBJECT-TYPE SYNTAX INTEGER { ind (1), dir (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Route" ::= {omnisTerminalsEntry 6 } omnisTerminalsKPAC OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (97), std (98), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "K-key to switch in command mode/to change the partner" ::= {omnisTerminalsEntry 7 } omnisTerminalsUser OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "User" ::= {omnisTerminalsEntry 8 } omnisTerminalsMessage OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Message to one TID (only for write)" ::= {omnisTerminalsEntry 9 } -------------------------------------------------------------- -- -- Omnis Terminal Info -- -- Kommando INF T,TID=xxx -- -- ( Unterstuetzung wahrscheinlich nicht sinnvoll ) -- -------------------------------------------------------------- omnisTerminalInfoTID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Terminal ID" ::= {sniOmnisTerminalInfo 1} omnisTerminalInfoPtnName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Partner name" ::= {sniOmnisTerminalInfo 2} omnisTerminalInfoProName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Processor Name" ::= {sniOmnisTerminalInfo 3} omnisTerminalInfoTyp OBJECT-TYPE SYNTAX INTEGER { term (1), appl (2), skp (3), cons (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Terminal type" ::= {sniOmnisTerminalInfo 4} omnisTerminalInfoState OBJECT-TYPE SYNTAX INTEGER { decl (1), opn (2), act (3), los (4), cls (5), hold (6), inact (7), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Terminal state" ::= {sniOmnisTerminalInfo 5 } omnisTerminalInfoRoute OBJECT-TYPE SYNTAX INTEGER { ind (1), dir (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Route" ::= {sniOmnisTerminalInfo 6 } omnisTerminalInfoKPAC OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (97), std (98), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "K-key to switch in command mode/to change the partner" ::= {sniOmnisTerminalInfo 7 } omnisTerminalInfoUser OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "User" ::= {sniOmnisTerminalInfo 8 } omnisTerminalInfoPAC OBJECT-TYPE SYNTAX INTEGER { no (1), line (2), prefix (3), std (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of display output for PAC" ::= {sniOmnisTerminalInfo 9 } omnisTerminalInfoADM OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Administration permited" ::= {sniOmnisTerminalInfo 10 } omnisTerminalInfoOPass OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The password for OCCUPY command" ::= {sniOmnisTerminalInfo 11 } omnisTerminalInfoMTAB OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The repoprt table" ::= {sniOmnisTerminalInfo 12 } omnisTerminalInfoExit OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The address code of EXIT" ::= {sniOmnisTerminalInfo 13 } omnisTerminalInfoHold OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), auto (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Hold the connection" ::= {sniOmnisTerminalInfo 14 } omnisTerminalInfoChange OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "CHANGELOG permited" ::= {sniOmnisTerminalInfo 15 } omnisTerminalInfoHcopy OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The hardcopy printer" ::= {sniOmnisTerminalInfo 16 } omnisTerminalInfoAck OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Acknowlegement required" ::= {sniOmnisTerminalInfo 17 } omnisTerminalInfoListening OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Another listening terminal" ::= {sniOmnisTerminalInfo 18 } omnisTerminalInfoColour OBJECT-TYPE SYNTAX INTEGER { blue (1), cyan (2), green (3), yellow (4), magenta (5), red (6), white (7), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The display colour" ::= {sniOmnisTerminalInfo 19 } omnisTerminalInfoLogging OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Protocoling in logging file" ::= {sniOmnisTerminalInfo 20 } omnisTerminalInfoBerID OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION " Password/permission in SKP generated" ::= {sniOmnisTerminalInfo 21 } omnisTerminalInfoDeclared OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Declared" ::= {sniOmnisTerminalInfo 22 } omnisTerminalInfoBreakKey OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (97), std (98), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The K-key to produce a break on a $DIALOG-Parnter" ::= {sniOmnisTerminalInfo 23 } omnisTerminalInfoCallKey OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (97), std (98), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The K-key for calling" ::= {sniOmnisTerminalInfo 24} omnisTerminalInfoCallInf OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Notify the call-state-information" ::= {sniOmnisTerminalInfo 25 } omnisTerminalInfoDisMod OBJECT-TYPE SYNTAX INTEGER { std (1), system (2), omnis (3), mixed (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Display mode" ::= {sniOmnisTerminalInfo 26 } omnisTerminalInfoConnect OBJECT-TYPE SYNTAX INTEGER { logon (1), start (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of connection" ::= {sniOmnisTerminalInfo 27 } omnisTerminalInfoOpncon OBJECT-TYPE SYNTAX INTEGER { std (1), free (2), dcl (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The connect permission" ::= {sniOmnisTerminalInfo 28 } omnisTerminalInfoPacAnz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of activ partners " ::= {sniOmnisTerminalInfo 29 } omnisTerminalInfoInputLogging OBJECT-TYPE SYNTAX INTEGER { std (1), both (2), rec (3), send (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol for the terminal input" ::= {sniOmnisTerminalInfo 30 } omnisTerminalInfoOutputLogging OBJECT-TYPE SYNTAX INTEGER { std (1), both (2), rec (3), send (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol for the terminal output" ::= {sniOmnisTerminalInfo 31 } omnisTerminalInfoAutoLogoff OBJECT-TYPE SYNTAX INTEGER { std (1), yes (2), no (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Automatic logoff" ::= {sniOmnisTerminalInfo 32 } omnisTerminalInfoLine25 OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), omnis (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Use the 25. display-line" ::= {sniOmnisTerminalInfo 33 } omnisTerminalExclPartner OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The exclusive partner" ::= {sniOmnisTerminalInfo 34 } omnisTerminalInfoSave OBJECT-TYPE SYNTAX INTEGER { std (1), screen (2), pkey (3), all (4), no (5), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Saved after disconnect" ::= {sniOmnisTerminalInfo 35 } omnisTerminalInfoReply OBJECT-TYPE SYNTAX INTEGER { restricted (1), all (2), std (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION " Route Data to UCON-application" ::= {sniOmnisTerminalInfo 36 } omnisTerminalInfoUserProt OBJECT-TYPE SYNTAX INTEGER { no (1), omnis (2), vtsucb (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The user protocol" ::= {sniOmnisTerminalInfo 37 } omnisTerminalInfoTestmode OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The test mode" ::= {sniOmnisTerminalInfo 38 } omnisTerminalInfoInsave OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), f1 (21), f2 (22), f3 (23), f4 (24), f5 (25), f6 (26), f7 (27), f8 (28), f9 (29), f10 (30), f11 (31), f12 (32), f13 (33), f14 (34), f15 (35), f16 (36), f17 (37), f18 (38), f19 (39), f20 (40), f21 (41), f22 (42), f23 (43), f24 (44), no (97), std (98), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The saved key" ::= {sniOmnisTerminalInfo 39 } omnisTerminalInfoSNMP OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "SNMP-terminal controlling" ::= {sniOmnisTerminalInfo 40 } omnisTerminalInfoTransProt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The transport protocol " ::= {sniOmnisTerminalInfo 41 } omnisTerminalInfoHcyForm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "formular of printer" ::= {sniOmnisTerminalInfo 42 } -------------------------------------------------------------- -- Omnis Partner Table -- -- Kommando INF P,activ= all | yes | hold | no -------------------------------------------------------------- omnisPartnerStatus OBJECT-TYPE SYNTAX INTEGER { all (1), activ (2), -- default hold (3), inactiv (4) } ACCESS read-write STATUS mandatory DESCRIPTION "State-Flag for restriction in Show Table" ::= {sniOmnisPartners 1} omnisPartnerTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the table omnisPartnerTable" ::= {sniOmnisPartners 2} omnisPartnerSelectTID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Terminal ID the following table is reduced to" ::= {sniOmnisPartners 3} omnisPartnerTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisPartnerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS partner table" ::= {sniOmnisPartners 4} omnisPartnerEntry OBJECT-TYPE SYNTAX OmnisPartnerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisPartnerPID} ::= {omnisPartnerTable 1} OmnisPartnerEntry ::= SEQUENCE { omnisPartnerPID INTEGER, omnisPartnerPAC DisplayString, omnisPartnerPtnName DisplayString, omnisPartnerProName DisplayString, omnisPartnerTyp INTEGER, omnisPartnerState INTEGER, omnisPartnerRoute INTEGER, omnisPartnerKPAC INTEGER, omnisPartnerTid INTEGER } omnisPartnerPID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Partner ID " ::= {omnisPartnerEntry 1} omnisPartnerPAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Partner address code" ::= {omnisPartnerEntry 2} omnisPartnerPtnName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Partner name" ::= {omnisPartnerEntry 3} omnisPartnerProName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Processor name" ::= {omnisPartnerEntry 4} omnisPartnerTyp OBJECT-TYPE SYNTAX INTEGER { tiam (1), dcam (2), ucon (3), utm (4), svp (5), skp (6), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Terminal type" ::= {omnisPartnerEntry 5} omnisPartnerState OBJECT-TYPE SYNTAX INTEGER { opn (1), act (2), los (4), cls (5), hold (6), inact (7), cancel (8), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Partner state " ::= {omnisPartnerEntry 6 } omnisPartnerRoute OBJECT-TYPE SYNTAX INTEGER { ind (1), dir (2), mux (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Route" ::= {omnisPartnerEntry 7 } omnisPartnerKPAC OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (97), std (98), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "K-key to change the partner" ::= {omnisPartnerEntry 8 } omnisPartnerTid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Terminal ID" ::= {omnisPartnerEntry 9} -------------------------------------------------------------- -- -- Omnis PartnerInfo -- -- Kommando INF P,PID=xxx -- -------------------------------------------------------------- omnisPartnerInfoPID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Partner ID" ::= {sniOmnisPartnerInfo 1} omnisPartnerInfoPAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "Partner address code" ::= {sniOmnisPartnerInfo 2} omnisPartnerInfoPtnName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Partner name" ::= {sniOmnisPartnerInfo 3} omnisPartnerInfoProName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Processor name" ::= {sniOmnisPartnerInfo 4} omnisPartnerInfoTyp OBJECT-TYPE SYNTAX INTEGER { tiam (1), dcam (2), ucon (3), utm (4), svp (5), skp (6), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Partner type" ::= {sniOmnisPartnerInfo 5} omnisPartnerInfoState OBJECT-TYPE SYNTAX INTEGER { opn (1), act (2), los (3), cls (4), hold (5), inact (6), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Partner state" ::= {sniOmnisPartnerInfo 6 } omnisPartnerInfoRoute OBJECT-TYPE SYNTAX INTEGER { ind (1), dir (2), mux (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Route" ::= {sniOmnisPartnerInfo 7 } omnisPartnerInfoKPAC OBJECT-TYPE SYNTAX INTEGER { k1 (1), k2 (2), k3 (3), k4 (4), k5 (5), k6 (6), k7 (7), k8 (8), k9 (9), k10 (10), k11 (11), k12 (12), k13 (13), k14 (14), no (97), std (98), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "K-key to change the partner" ::= {sniOmnisPartnerInfo 8 } omnisPartnerInfoRepAppName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the representative application" ::= {sniOmnisPartnerInfo 9 } omnisPartnerInfoOPass OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The password for OCCUPY command" ::= {sniOmnisPartnerInfo 10 } omnisPartnerInfoMTAB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The repoprt table" ::= {sniOmnisPartnerInfo 11} omnisPartnerInfoExit OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The address code of EXIT" ::= {sniOmnisPartnerInfo 12 } omnisPartnerInfoHold OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Hold the connection" ::= {sniOmnisPartnerInfo 13 } omnisPartnerInfoChange OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "CHANGELOG permited" ::= {sniOmnisPartnerInfo 14 } omnisPartnerInfoHcopy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The hardcopy printer" ::= {sniOmnisPartnerInfo 15 } omnisPartnerInfoClass OBJECT-TYPE SYNTAX INTEGER { sav (1), out (2), del (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The message class for the partner" ::= {sniOmnisPartnerInfo 16 } omnisPartnerInfoColour OBJECT-TYPE SYNTAX INTEGER { blue (1), cyan (2), green (3), yellow (4), magenta (5), red (6), white (7), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The display colour" ::= {sniOmnisPartnerInfo 17 } omnisPartnerInfoProtocol OBJECT-TYPE SYNTAX INTEGER { dssim (1), omnis (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "the protocol type for a DCAM-connection" ::= {sniOmnisPartnerInfo 18 } omnisPartnerInfoLogging OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Protocoling in logging file" ::= {sniOmnisPartnerInfo 19 } omnisPartnerInfoLPass OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Connection password required" ::= {sniOmnisPartnerInfo 20 } omnisPartnerInfoDeclared OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Declared" ::= {sniOmnisPartnerInfo 21 } omnisPartnerInfoAutoLogoff OBJECT-TYPE SYNTAX INTEGER { std (1), yes (2), no (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Automatic logoff" ::= {sniOmnisPartnerInfo 22 } omnisPartnerInfoLine25 OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), std (3), omnis (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Use the 25. display-line" ::= {sniOmnisPartnerInfo 23 } omnisPartnerStartSequ OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of the startsequence" ::= {sniOmnisPartnerInfo 24 } omnisPartnerInfoCMsg OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Connection message" ::= {sniOmnisPartnerInfo 25 } omnisPartnerInfoLCase OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Lower-case character to partner permited" ::= {sniOmnisPartnerInfo 26 } omnisPartnerInfoSave OBJECT-TYPE SYNTAX INTEGER { std (1), screen (2), pkey (3), all (4), no (5), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Saved after disconnect" ::= {sniOmnisPartnerInfo 27 } omnisPartnerInfoTid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Terminal ID" ::= {sniOmnisPartnerInfo 28 } omnisPartnerInfoSNMP OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "SNMP-terminal controlling" ::= {sniOmnisPartnerInfo 29 } omnisPartnerInfoPACPrefix OBJECT-TYPE SYNTAX INTEGER { no (1), std (2), line (3), prefix (4), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of display output for PAC" ::= {sniOmnisPartnerInfo 30 } omnisPartnerInfoBerid OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "Password/permission in SKP generated" ::= {sniOmnisPartnerInfo 31 } omnisPartnerInfoConnect OBJECT-TYPE SYNTAX INTEGER { opncon (1), logon (2), start (3), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of connection" ::= {sniOmnisPartnerInfo 32 } -------------------------------------------- -- -- Omnis Group Table -- -- Kommando INF GROUP -- -------------------------------------------- omnisGroupsTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the table omnisGroupsTable" ::= {sniOmnisGroups 1} omnisGroupsSelectTID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The terminal ID the following table is reduced to" ::= {sniOmnisGroups 2} omnisGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS Groups table" ::= {sniOmnisGroups 3} omnisGroupsEntry OBJECT-TYPE SYNTAX OmnisGroupsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX { omnisGroupsGAC, omnisGroupsPAC } ::= {omnisGroupsTable 1} OmnisGroupsEntry ::= SEQUENCE { omnisGroupsGAC DisplayString, omnisGroupsPAC DisplayString, omnisGroupsTid INTEGER } omnisGroupsGAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The address code of the Group" ::= {omnisGroupsEntry 1} omnisGroupsPAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The address code of the partner" ::= {omnisGroupsEntry 2} omnisGroupsTid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The terminal ID" ::= {omnisGroupsEntry 3} -------------------------------------------------------------- -- -- Omnis HardCopy Table -- -- Kommando INF Hcopy activ = yes | no -- -------------------------------------------------------------- omnisHardCopyStatus OBJECT-TYPE SYNTAX INTEGER { all (1), activ (2), -- default inactiv (4) } ACCESS read-write STATUS mandatory DESCRIPTION "State-Flag for restriction in Show Table" ::= {sniOmnisHardCopy 1} omnisHardCopyTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the table omnisHardCopyTable" ::= {sniOmnisHardCopy 2} omnisHardCopyTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisHardCopyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS HardCopy table" ::= {sniOmnisHardCopy 3} omnisHardCopyEntry OBJECT-TYPE SYNTAX OmnisHardCopyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisHardCopyHID} ::= {omnisHardCopyTable 1} OmnisHardCopyEntry ::= SEQUENCE { omnisHardCopyHAC DisplayString, omnisHardCopyHID INTEGER, omnisHardCopyPtnName DisplayString, omnisHardCopyProName DisplayString, omnisHardCopyState INTEGER, omnisHardCopyINOP INTEGER, omnisHardCopyConnect DisplayString, omnisHardCopyRestart DisplayString } omnisHardCopyHAC OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The address code of the Printer" ::= {omnisHardCopyEntry 1} omnisHardCopyHID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ID of the Printer " ::= {omnisHardCopyEntry 2} omnisHardCopyPtnName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Partner name" ::= {omnisHardCopyEntry 3} omnisHardCopyProName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Processor name" ::= {omnisHardCopyEntry 4} omnisHardCopyState OBJECT-TYPE SYNTAX INTEGER { cls-p (1), opn (2), act (3), los (4), cls (5), inact (6), cancel (7), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of the printer" ::= {omnisHardCopyEntry 5} omnisHardCopyINOP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The address code of the substituting printer" ::= {omnisHardCopyEntry 6} omnisHardCopyConnect OBJECT-TYPE SYNTAX INTEGER { s (1), u (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The start time for the connection to a printer" ::= {omnisHardCopyEntry 7} omnisHardCopyRestart OBJECT-TYPE SYNTAX INTEGER { start (1), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Restart hardcopy connection " ::= {omnisHardCopyEntry 8 } --------------------------------------- -- -- Omnis HAC/PID Table -- -- Kdo: INF HCOPY -- --------------------------------------- omnisHardCopyPIDsTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the omnisHardCopyTable" ::= {sniOmnisHardCopyPIDs 1} omnisHardCopyPIDsSelectHid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Hid in omnisHardCopyTable the following table is reduced to " ::= {sniOmnisHardCopyPIDs 2} omnisHardCopyPIDsTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisHardCopyPIDsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS HardCopy table" ::= {sniOmnisHardCopyPIDs 3} omnisHardCopyPIDsEntry OBJECT-TYPE SYNTAX OmnisHardCopyPIDsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisHardCopyPIDsHID, omnisHardCopyPIDsID } ::= {omnisHardCopyPIDsTable 1} OmnisHardCopyPIDsEntry ::= SEQUENCE { omnisHardCopyPIDsHID INTEGER, omnisHardCopyPIDsID INTEGER } omnisHardCopyPIDsHID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of printer (HID)" ::= {omnisHardCopyPIDsEntry 1 } omnisHardCopyPIDsID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of partner (PID)" ::= {omnisHardCopyPIDsEntry 2} --------------------------------------- -- -- Omnis HAC/TID Table -- -- Kdo: INF -- --------------------------------------- omnisHardCopyTIDsTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the omnisHardCopyTable" ::= {sniOmnisHardCopyTIDs 1} omnisHardCopyTIDsSelectHid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Hid in omnisHardCopyTable the following table is reduced to" ::= {sniOmnisHardCopyTIDs 2} omnisHardCopyTIDsTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisHardCopyTIDsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS HardCopy table" ::= {sniOmnisHardCopyTIDs 3} omnisHardCopyTIDsEntry OBJECT-TYPE SYNTAX OmnisHardCopyTIDsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisHardCopyTIDsHID, omnisHardCopyTIDsID } ::= {omnisHardCopyTIDsTable 1} OmnisHardCopyTIDsEntry ::= SEQUENCE { omnisHardCopyTIDsHID INTEGER, omnisHardCopyTIDsHAC DisplayString, omnisHardCopyTIDsID INTEGER } omnisHardCopyTIDsHID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of printer (HID)" ::= {omnisHardCopyTIDsEntry 1} omnisHardCopyTIDsHAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The address code of printer (HAC)" ::= {omnisHardCopyTIDsEntry 2 } omnisHardCopyTIDsID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of terminal (TID)" ::= {omnisHardCopyTIDsEntry 3} -------------------------------------------------------------- -- -- Omnis HardCopy Create -- -- Kommando Hcopy -- -------------------------------------------------------------- omnisHardCopyCreateHAC OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The address code for a new printer" ::= {sniOmnisHardCopyCreate 1 } omnisHardCopyCreateHID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID for a created printer" ::= {sniOmnisHardCopyCreate 2 } omnisHardCopyCreatePtnName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The terminal name for a new Printer" ::= {sniOmnisHardCopyCreate 3 } omnisHardCopyCreateProName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The processor name for a new Printer" ::= {sniOmnisHardCopyCreate 4 } omnisHardCopyCreateInop OBJECT-TYPE SYNTAX DisplayString (SIZE (1..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The address code of the substituting printer" ::= {sniOmnisHardCopyCreate 5 } omnisHardCopyCreateConnect OBJECT-TYPE SYNTAX INTEGER{ s (1), u (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The start time for the connection to a new printer" ::= {sniOmnisHardCopyCreate 6 } -------------------------------------------------------------- -- -- Omnis-Omnis Table -- -- Kommando INF OMNIS, activ = yes | no | all -- -------------------------------------------------------------- omnisOmnisStatus OBJECT-TYPE SYNTAX INTEGER { all (1), activ (2), -- default inactiv (4) } ACCESS read-write STATUS mandatory DESCRIPTION "State-Flag for restriction in Show Table" ::= {sniOmnisOmnis 1} omnisOmnisTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the omnisOmnisTable" ::= {sniOmnisOmnis 2} omnisOmnisTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisOmnisEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS Omnis table" ::= {sniOmnisOmnis 3} omnisOmnisEntry OBJECT-TYPE SYNTAX OmnisOmnisEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisOmnisID} ::= {omnisOmnisTable 1} OmnisOmnisEntry ::= SEQUENCE { omnisOmnisOAC DisplayString, omnisOmnisID INTEGER, omnisOmnisPtnName DisplayString, omnisOmnisProName DisplayString, omnisOmnisState INTEGER, omnisOmnisConnect INTEGER, omnisOmnisTime INTEGER, omnisOmnisLPass INTEGER, omnisOmnisOpncon INTEGER, omnisOmnisRestart INTEGER } omnisOmnisOAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "Omnis address code " ::= {omnisOmnisEntry 1} omnisOmnisID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of OMNIS" ::= {omnisOmnisEntry 2} omnisOmnisPtnName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Partner name" ::= {omnisOmnisEntry 3} omnisOmnisProName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Processor name" ::= {omnisOmnisEntry 4 } omnisOmnisState OBJECT-TYPE SYNTAX INTEGER { cls-p (1), opn (2), act (3), los (4), cls (5), inact (6), cancel (7), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The OMNIS state" ::= {omnisOmnisEntry 5 } omnisOmnisConnect OBJECT-TYPE SYNTAX INTEGER { start (1), opncon (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of connection" ::= {omnisOmnisEntry 6 } omnisOmnisTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " The connect duration" ::= {omnisOmnisEntry 7 } omnisOmnisLPass OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The connection password" ::= {omnisOmnisEntry 8 } omnisOmnisOpncon OBJECT-TYPE SYNTAX INTEGER { dcl (1), free (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The connect permission" ::= {omnisOmnisEntry 9 } omnisOmnisRestart OBJECT-TYPE SYNTAX INTEGER { start (1), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "Restart Omnis-Omnis Connection (write-only) " ::= {omnisOmnisEntry 10 } --------------------------------------- -- -- Omnis Mux Table -- -- Kdo: INF MUX -- --------------------------------------- omnisMuxStatus OBJECT-TYPE SYNTAX INTEGER { all (1), activ (2), -- default inactiv (4) } ACCESS read-write STATUS mandatory DESCRIPTION "State-Flag for restriction in Show Table" ::= {sniOmnisMux 1} omnisMuxTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the omnisMuxTable" ::= {sniOmnisMux 2} omnisMuxTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisMuxEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS Mux table" ::= {sniOmnisMux 3} omnisMuxEntry OBJECT-TYPE SYNTAX OmnisMuxEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisMuxID} ::= {omnisMuxTable 1} OmnisMuxEntry ::= SEQUENCE { omnisMuxID INTEGER, omnisMuxPtnName DisplayString, omnisMuxProName DisplayString, omnisMuxState INTEGER, omnisMuxConnect INTEGER, omnisMuxLPass INTEGER, omnisMuxSessions INTEGER, omnisMuxAvailability INTEGER } omnisMuxID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of MUX" ::= {omnisMuxEntry 1} omnisMuxPtnName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Partner name" ::= {omnisMuxEntry 2 } omnisMuxProName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Processor name" ::= {omnisMuxEntry 3 } omnisMuxState OBJECT-TYPE SYNTAX INTEGER { cls-p (1), opn (2), act (3), los (4), cls (5), inact (6), cancel (7), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of the MUX" ::= {omnisMuxEntry 4 } omnisMuxConnect OBJECT-TYPE SYNTAX INTEGER { start (1), opncon (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of connection" ::= {omnisMuxEntry 5 } omnisMuxLPass OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The connection password" ::= {omnisMuxEntry 6 } omnisMuxSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of actual sessions" ::= {omnisMuxEntry 7 } omnisMuxAvailability OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-only STATUS mandatory DESCRIPTION "The availability" ::= {omnisMuxEntry 8 } --------------------------------------- -- -- Omnis Exit Table -- -- Kdo: INF Exit -- --------------------------------------- omnisExitTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the omnisExitTable" ::= {sniOmnisExits 1} omnisExitTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisExitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS Exit table" ::= {sniOmnisExits 2} omnisExitEntry OBJECT-TYPE SYNTAX OmnisExitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisExitID, omnisExitModul } ::= {omnisExitTable 1} OmnisExitEntry ::= SEQUENCE { omnisExitEAC DisplayString, omnisExitID INTEGER, omnisExitModul DisplayString } omnisExitEAC OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The address code of EXIT" ::= {omnisExitEntry 1} omnisExitID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of Exit" ::= {omnisExitEntry 2} omnisExitModul OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The EXIT module" ::= {omnisExitEntry 3} --------------------------------------- -- -- Omnis Exit/TID Table -- -- Kdo: INF Exit -- --------------------------------------- omnisExitTIDsTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the omnisExitTable" ::= {sniOmnisExitTIDs 1} omnisExitTIDsSelectEac OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The Exit Adress Code the following table is reduced to " ::= {sniOmnisExitTIDs 2} omnisExitTIDsTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisExitTIDsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS Exit table" ::= {sniOmnisExitTIDs 3} omnisExitTIDsEntry OBJECT-TYPE SYNTAX OmnisExitTIDsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisExitTIDsEAC, omnisExitTIDsID } ::= {omnisExitTIDsTable 1} OmnisExitTIDsEntry ::= SEQUENCE { omnisExitTIDsEAC DisplayString, omnisExitTIDsID INTEGER } omnisExitTIDsEAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The address code of EXIT" ::= {omnisExitTIDsEntry 1 } omnisExitTIDsID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of Terminal (TID)" ::= {omnisExitTIDsEntry 2} --------------------------------------- -- -- Omnis Exit/PID Table -- -- Kdo: INF Exit -- --------------------------------------- omnisExitPIDsTabNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in the omnisExitTable" ::= {sniOmnisExitPIDs 1} omnisExitPIDsSelectEac OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The Exit Adress Code the following table is reduced to " ::= {sniOmnisExitPIDs 2} omnisExitPIDsTable OBJECT-TYPE SYNTAX SEQUENCE OF OmnisExitPIDsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OMNIS Exit table" ::= {sniOmnisExitPIDs 3} omnisExitPIDsEntry OBJECT-TYPE SYNTAX OmnisExitPIDsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table" INDEX {omnisExitPIDsEAC, omnisExitPIDsID } ::= {omnisExitPIDsTable 1} OmnisExitPIDsEntry ::= SEQUENCE { omnisExitPIDsEAC DisplayString, omnisExitPIDsID INTEGER } omnisExitPIDsEAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The address code of EXIT" ::= {omnisExitPIDsEntry 1 } omnisExitPIDsID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of Partner (PID)" ::= {omnisExitPIDsEntry 2} -------------------------------------------------- -- -- Omnis Exit Create -- -- Kommando Exit ( Create eines Exit ) -- -------------------------------------------------- omnisExitCreateEAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The address code for an new EXIT" ::= {sniOmnisExitCreate 1 } omnisExitCreateModul1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 1. modul for an new EXIT" ::= {sniOmnisExitCreate 2 } omnisExitCreateModul2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 2. modul for an new EXIT" ::= {sniOmnisExitCreate 3 } omnisExitCreateModul3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 3. modul for an new EXIT" ::= {sniOmnisExitCreate 4 } omnisExitCreateModul4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 4. modul for an new EXIT" ::= {sniOmnisExitCreate 5 } omnisExitCreateModul5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 5. modul for an new EXIT" ::= {sniOmnisExitCreate 6 } omnisExitCreateModul6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 6. modul for an new EXIT" ::= {sniOmnisExitCreate 7 } omnisExitCreateModul7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 7. modul for an new EXIT" ::= {sniOmnisExitCreate 8 } omnisExitCreateModul8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 8. modul for an new EXIT" ::= {sniOmnisExitCreate 9 } omnisExitCreateModul9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 9. modul for an new EXIT" ::= {sniOmnisExitCreate 10 } omnisExitCreateModul10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 10. modul for an new EXIT" ::= {sniOmnisExitCreate 11 } omnisExitCreateModul11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 11. modul for an new EXIT" ::= {sniOmnisExitCreate 12 } omnisExitCreateModul12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 12. modul for an new EXIT" ::= {sniOmnisExitCreate 13 } omnisExitCreateModul13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 13. modul for an new EXIT" ::= {sniOmnisExitCreate 14 } omnisExitCreateModul14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The 14. modul for an new EXIT" ::= {sniOmnisExitCreate 15 } omnisExitCreateOption OBJECT-TYPE SYNTAX INTEGER { create (1), modify (2), delete (3), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION " Defines the operation to be done " ::= {sniOmnisExitCreate 16 } -------------------------------------------------------------- -- -- Omnis TRACE -- -- Kommando -- -------------------------------------------------------------- omnisTraceConnection OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "DCAM-connection trace" ::= {sniOmnisTrace 1} omnisTraceExit OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "EXIT trace" ::= {sniOmnisTrace 2} omnisTraceTransport OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2), select (3), unknown (99) } ACCESS read-write STATUS mandatory DESCRIPTION "DCAM-transport trace" ::= {sniOmnisTrace 3} omnisTraceTransportTrm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "DCAM-transport trace for a selected terminal" ::= {sniOmnisTrace 4} omnisTraceTransporthcy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "DCAM-transport trace for a selected printer" ::= {sniOmnisTrace 5} omnisTraceTransportmux OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-write STATUS mandatory DESCRIPTION "DCAM-transport trace for a selected MUX" ::= {sniOmnisTrace 6} omnisTraceTransportoms OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "DCAM-transport trace for a selected OMNIS" ::= {sniOmnisTrace 7} -- -- OMNIS Trap group -- omnisStopTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES { omnisSettingsAppName } DESCRIPTION "Sending a TRAP, if an OMNIS has been terminated " ::= 301 omnisStartTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES { omnisSettingsAppName } DESCRIPTION "Sending a TRAP, if an OMNIS has been activated " ::= 302 omnisConnStopTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName,omnisPartnerInfoPtnName,omnisPartnerInfoProName,omnisPartnerInfoPAC} DESCRIPTION "Sending a TRAP, if a critical Connection has been deactivated " ::= 303 omnisDstConnStopTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName,omnisTerminalInfoPtnName,omnisTerminalInfoProName,omnisTerminalInfoTID} DESCRIPTION "Sending a TRAP, if an OMNIS Session has been normally terminated" ::= 304 omnisEventTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName,omnisPartnerInfoPtnName,omnisPartnerInfoProName,omnisPartnerInfoPAC} DESCRIPTION "Sending a TRAP, if a critical Omnis message arrived " ::= 305 omnisDstLevelTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName} DESCRIPTION "Sending a TRAP, if DSTMAX has been reached " ::= 306 omnisPacLevelTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName} DESCRIPTION "Sending a TRAP, if PACMAX has been reached " ::= 307 omnisPtnLevelTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName} DESCRIPTION "Sending a TRAP, if PTNMAX has been reached " ::= 308 omnisMuxConnStopTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName,omnisPartnerInfoPtnName,omnisPartnerInfoProName,omnisPartnerInfoPAC} DESCRIPTION "Sending a TRAP, if a critical MUX Connection has been deactivated " ::= 309 omnisOmnConnStopTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName,omnisPartnerInfoPtnName,omnisPartnerInfoProName,omnisPartnerInfoPAC} DESCRIPTION "Sending a TRAP, if a critical OMNIS-OMNIS Connection has been deactivated" ::= 310 omnisHcConnStopTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName,omnisPartnerInfoPtnName,omnisPartnerInfoProName,omnisPartnerInfoPAC} DESCRIPTION "Sending a TRAP, if a critical Hardcopy Connection has been deactivated" ::= 311 omnisDumpWriteTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName} DESCRIPTION "Sending a TRAP, if OMNIS has started writing a Dump" ::= 312 omnisDumpEndTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName} DESCRIPTION "Sending a TRAP, if OMNIS has finished writing a Dump" ::= 313 omnisEndTrap TRAP-TYPE ENTERPRISE sniOmnisTraps VARIABLES {omnisSettingsAppName} DESCRIPTION "Sending a TRAP,if OMNIS has been normally terminated " ::= 314 -- -- OMNIS User defined Traps -- omnisUserdefinedTrapData OBJECT IDENTIFIER ::= { sniOmnisUserdefinedTraps 1 } omnisTrapMsgText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "OMNIS Message-Text generating a Trap" ::= {omnisUserdefinedTrapData 1} omnisUserdefinedTrap OBJECT IDENTIFIER ::= { sniOmnisUserdefinedTraps 10 } omnisGeneralTrap TRAP-TYPE ENTERPRISE omnisUserdefinedTrap VARIABLES {omnisSettingsAppName,omnisTrapMsgText} DESCRIPTION "Sending a TRAP, in all user-defined cases" ::= 320 END