-- -- OPTIX-SONET-TU-MIB-V2.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Wednesday, July 26, 2006 at 17:22:43 -- OPTIX-SONET-TU-MIB-V2 DEFINITIONS ::= BEGIN IMPORTS optixProvisionSonet FROM OPTIX-OID-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Gauge32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; optixsonetFacilityMgt MODULE-IDENTITY LAST-UPDATED "200605232008Z" -- May 23, 2006 at 20:08 GMT ORGANIZATION "Your organization" CONTACT-INFO "Your contact info" DESCRIPTION "Enter the description for this MIB module." ::= { optixProvisionSonet 2 } -- -- Textual conventions -- LpbkType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enter the description for the LpbkType TEXTUAL-CONVENTION converted from type assignment." SYNTAX INTEGER { terminal(1), facility(2), crs(3), ds1feac(4), ds3feac(5), fac2ni(6), noloop(255) } IntfType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enter the description for the IntfType TEXTUAL-CONVENTION converted from type assignment." SYNTAX INTEGER { ds1-asyn-vt1(1), ds3-asyn-sts1(10), ec(12), ds3-tmux-ds1(13), ds3-srv-ds1(17), uas(65), mix(100), invalid(254) } -- -- Node definitions -- -- 1.3.6.1.4.1.2011.2.25.4.20.2.1 ds3PortAttribTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds3PortAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS3 facilities configuration Table" ::= { optixsonetFacilityMgt 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1 ds3PortAttribEntry OBJECT-TYPE SYNTAX Ds3PortAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS3 facilities configuration entry" INDEX { ds3PortIndexSlotId, ds3PortIndexPortId } ::= { ds3PortAttribTable 1 } Ds3PortAttribEntry ::= SEQUENCE { ds3PortIndexSlotId Gauge32, ds3PortIndexPortId Gauge32, ds3PortAttribReq INTEGER, ds3PortAttribLbo INTEGER, ds3PortAttribLineCde INTEGER, ds3PortAttribFmt INTEGER, ds3PortAttribTACC INTEGER, ds3PortAttribLof2ais INTEGER, ds3PortAttribSvtimer OCTET STRING, ds3PortAttribPST OCTET STRING, ds3PortAttribSST OCTET STRING, ds3LoopbackStatus LpbkType, ds3LoopbackTimeout Gauge32, ds3RemoteALWFELPBK INTEGER } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.1 ds3PortIndexSlotId OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Slot number. This will indicate what is the slot of the object. " ::= { ds3PortAttribEntry 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.2 ds3PortIndexPortId OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port Number. This will indicate what is the Port of the object. " ::= { ds3PortAttribEntry 2 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.3 ds3PortAttribReq OBJECT-TYPE SYNTAX INTEGER { high(1), low(2), invalid(254) } MAX-ACCESS read-write STATUS current DESCRIPTION "High or low receive equalizer." ::= { ds3PortAttribEntry 3 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.4 ds3PortAttribLbo OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-write STATUS current DESCRIPTION "Line build out. Line build out (DS3 port) values Value Description 1 Cable length range from 0 to 225 feet. 2 Cable length range from 226 to 450 feet. " ::= { ds3PortAttribEntry 4 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.5 ds3PortAttribLineCde OBJECT-TYPE SYNTAX INTEGER { b3zs(3), invalid(254) } MAX-ACCESS read-only STATUS current DESCRIPTION "DS3 line code. Valid value is B3ZS." ::= { ds3PortAttribEntry 5 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.6 ds3PortAttribFmt OBJECT-TYPE SYNTAX INTEGER { cbit(3), m23(4), unframed(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Frame format. Valid values are CBIT, M23 or UNFRAMED. For PDM3 unit, if the port type is DS3_ASYN_STS1, then can be CBIT, M23 or UNFRAMED. If the port type is DS3_TMUX_DS1 or DS3_SRV_DS1, then the only can be CBIT or M23." ::= { ds3PortAttribEntry 6 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.7 ds3PortAttribTACC OBJECT-TYPE SYNTAX INTEGER (0..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the DS3 port as a test access port with a selected unique TAP number." ::= { ds3PortAttribEntry 7 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.8 ds3PortAttribLof2ais OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(254) } MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter is provisioned to determine whether or not to generate DS3 AIS for the DS3 LOF. The Valid value of this parameter is 'no' and 'yes'. PQT3/PQT3A/PQT3P/PQT3B units support this parameter. " ::= { ds3PortAttribEntry 8 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.9 ds3PortAttribSvtimer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Signal validation timer in minutes. Valid values are shown below. Value Description From 00-03 Signal validation timer in minutes. Only valid if auto in-service feature is supported. is a string, and format is: HH-MM. to 48-00 HH - Hour, it is an integer ranging from 0 to 48; MM - Minute, it is an integer ranging from 0 to 59. The longest time is 48 hours. Default is 00-03 (3 minutes). " ::= { ds3PortAttribEntry 9 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.10 ds3PortAttribPST OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The primary state of the entity. Administrative State (PST) Definition IS Puts the entity in service. OOS Puts the entity out of service. " ::= { ds3PortAttribEntry 10 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.11 ds3PortAttribSST OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The secondary state of the entity. Administrative State (PST) Definition. AINS Puts the entity in automatic in-service. MT Removes the entity from service for maintenance." ::= { ds3PortAttribEntry 11 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.12 ds3LoopbackStatus OBJECT-TYPE SYNTAX LpbkType MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. " ::= { ds3PortAttribEntry 12 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.13 ds3LoopbackTimeout OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The remnant time that loop-back will be released. " ::= { ds3PortAttribEntry 13 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.1.1.14 ds3RemoteALWFELPBK OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), invalid(254) } MAX-ACCESS read-write STATUS current DESCRIPTION "(Optional) Far-end loopback allowance attribute of the port. If it is enable, the automatic far-end loopbacks are allowed. It is either enable or disable. The system default is enable. The parameter type is ENABLE_DISABLE, which disables or enables an attribute.Automatic application of loopbacks originating from the far end can be initiated on the T3 ports of a PDM3 card. " ::= { ds3PortAttribEntry 14 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2 ds1PortAttribTable OBJECT-TYPE SYNTAX SEQUENCE OF Ds1PortAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 facilities configuration Table" ::= { optixsonetFacilityMgt 2 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1 ds1PortAttribEntry OBJECT-TYPE SYNTAX Ds1PortAttribEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DS1 facilities configuration entry" INDEX { ds1PortIndexSlotId, ds1PortIndexPortId, ds1PortIndexPath } ::= { ds1PortAttribTable 1 } Ds1PortAttribEntry ::= SEQUENCE { ds1PortIndexSlotId Gauge32, ds1PortIndexPortId Gauge32, ds1PortIndexPath Gauge32, ds1PortAttribLbo INTEGER, ds1PortAttribLineCde INTEGER, ds1PortAttribFmt INTEGER, ds1PortAttribTACC INTEGER, ds1PortAttribLof2ais INTEGER, ds1PortAttribSvtimer OCTET STRING, ds1PortAttribPST OCTET STRING, ds1PortAttribSST OCTET STRING, ds1LoopbackStatus LpbkType, ds1LoopbackTimeout Gauge32, ds1RemoteALWFELPBK INTEGER, ds1PortLpbkAutomaticTime Gauge32 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.1 ds1PortIndexSlotId OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Slot number. This will indicate what is the slot of the object. " ::= { ds1PortAttribEntry 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.2 ds1PortIndexPortId OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port Number. This will indicate what is the Port of the object.For the Transmux unit this is the DS3 port number.And for other Ds1 units, it's the Ds1 port Number. " ::= { ds1PortAttribEntry 2 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.3 ds1PortIndexPath OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ds1 identifier of the Transmux unit .For DS1 in a Transmux unit, it is equivalent to DS1 port number of its Transmux unit. For other Ds1 units, It will be zero. " ::= { ds1PortAttribEntry 3 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.4 ds1PortAttribLbo OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "Line build out. Line build out (DS1 port) values Value Description 1 Cable length range from 0 to 131 feet. 2 Cable length range from 132 to 262 feet. 3 Cable length range from 263 to 393 feet. 4 Cable length range from 394 to 524 feet. 5 Cable length range from 525 to 655 feet. " ::= { ds1PortAttribEntry 4 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.5 ds1PortAttribLineCde OBJECT-TYPE SYNTAX INTEGER { b8zs(1), ami(2), invalid(254) } MAX-ACCESS read-write STATUS current DESCRIPTION "DS1 Line coding. Valid value is AMI or B8ZS. Default is B8ZS." ::= { ds1PortAttribEntry 5 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.6 ds1PortAttribFmt OBJECT-TYPE SYNTAX INTEGER { sf(1), esf(2), unframed(255) } MAX-ACCESS read-write STATUS current DESCRIPTION "Frame format. Valid value is SF, ESF or UNFRAMED." ::= { ds1PortAttribEntry 6 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.7 ds1PortAttribTACC OBJECT-TYPE SYNTAX INTEGER (0..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the DS1/T1 port as a test access port with a selected unique TAP number. " ::= { ds1PortAttribEntry 7 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.8 ds1PortAttribLof2ais OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2), invalid(254) } MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter is provisioned to determine whether or not to generate DS1 AIS for the DS1 LOF" ::= { ds1PortAttribEntry 8 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.9 ds1PortAttribSvtimer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "Signal validation timer in minutes. Valid values are shown below. Value Description From 00-03 Signal validation timer in minutes. Only valid if auto in-service feature is supported. is a string, and format is: HH-MM. to 48-00 HH - Hour, it is an integer ranging from 0 to 48; MM - Minute, it is an integer ranging from 0 to 59. The longest time is 48 hours. Default is 00-03 (3 minutes). " ::= { ds1PortAttribEntry 9 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.10 ds1PortAttribPST OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The primary state of the entity. Administrative State (PST) Definition IS Puts the entity in service. OOS Puts the entity out of service. " ::= { ds1PortAttribEntry 10 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.11 ds1PortAttribSST OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The secondary state of the entity. Administrative State (PST) Definition. AINS Puts the entity in automatic in-service. MT Removes the entity from service for maintenance." ::= { ds1PortAttribEntry 11 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.12 ds1LoopbackStatus OBJECT-TYPE SYNTAX LpbkType MAX-ACCESS read-write STATUS current DESCRIPTION "This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end." ::= { ds1PortAttribEntry 12 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.13 ds1LoopbackTimeout OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The remnant time that loop-back will be released. " ::= { ds1PortAttribEntry 13 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.14 ds1RemoteALWFELPBK OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2), invalid(254) } MAX-ACCESS read-write STATUS current DESCRIPTION "(Optional) Far-end loopback allowance attribute of the port. If it is enable, the automatic far-end loopbacks are allowed. It is either enable or disable. The system default is enable. The parameter type is ENABLE_DISABLE, which disables or enables an attribute.Automatic application of loopbacks originating from the far end can be initiated on the T1 ports of a PLT1,PDT1,PDT1P card.It indicates that the port not support this parameter when the attribute is invalid. " ::= { ds1PortAttribEntry 14 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.2.1.15 ds1PortLpbkAutomaticTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time-out ticks (1 minute). For the T1 port default value is 120 (2 hours). 0 means time-out function is disabling. Valid values are 0~9999." ::= { ds1PortAttribEntry 15 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.3 portTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF PortTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port type management table." ::= { optixsonetFacilityMgt 3 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.3.1 portTypeEntry OBJECT-TYPE SYNTAX PortTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port type management entry." INDEX { portIndexSlotId, portIndexPortId } ::= { portTypeTable 1 } PortTypeEntry ::= SEQUENCE { portIndexSlotId Gauge32, portIndexPortId Gauge32, portType IntfType } -- 1.3.6.1.4.1.2011.2.25.4.20.2.3.1.1 portIndexSlotId OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Slot number. This will indicate what is the slot of the object. " ::= { portTypeEntry 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.3.1.2 portIndexPortId OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port Number. This will indicate what is the Port of the object. " ::= { portTypeEntry 2 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.3.1.3 portType OBJECT-TYPE SYNTAX IntfType MAX-ACCESS read-write STATUS current DESCRIPTION "The AID unit port type.Valid values are shown below. INTFTYPE values Value Description DS3_ASYN_STS1 DS3 signal asynchronous mapped into STS1. Default for DS3 unit. DS3_TMUX_DS1 Multiplexing and de-multiplexing of DS1s to/from DS3. Default for Transmux unit (PDM3). DS1_ASYN_VT1 DS1 signal asynchronous mapped into VT1. Default for DS1 unit. DS3_SRV_DS1 Multiplexing and de-multiplexing of DS1s to/from DS3 as M13 server. EC1 EC1 signal mapped into STS1. PQT3A support EC1 service. UAS It indicates there is no use of the port. " ::= { portTypeEntry 3 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.4 optixsonetFacilityMgtConformance OBJECT IDENTIFIER ::= { optixsonetFacilityMgt 4 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.4.1 optixsonetFacilityMgtGroups OBJECT IDENTIFIER ::= { optixsonetFacilityMgtConformance 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.4.1.1 currentObjectGroup OBJECT-GROUP OBJECTS { ds3PortIndexSlotId, ds3PortIndexPortId, ds3PortAttribReq, ds3PortAttribLbo, ds3PortAttribLineCde, ds3PortAttribFmt, ds3PortAttribTACC, ds3PortAttribLof2ais, ds3PortAttribSvtimer, ds3PortAttribPST, ds3PortAttribSST, ds3LoopbackStatus, ds3LoopbackTimeout, ds3RemoteALWFELPBK, ds1PortIndexSlotId, ds1PortIndexPortId, ds1PortIndexPath, ds1PortAttribLbo, ds1PortAttribLineCde, ds1PortAttribFmt, ds1PortAttribTACC, ds1PortAttribLof2ais, ds1PortAttribSvtimer, ds1PortAttribPST, ds1PortAttribSST, ds1LoopbackStatus, ds1LoopbackTimeout, ds1RemoteALWFELPBK, ds1PortLpbkAutomaticTime, portIndexSlotId, portIndexPortId, portType } STATUS current DESCRIPTION "Enter the description of the created OBJECT-GROUP." ::= { optixsonetFacilityMgtGroups 1 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.4.2 optixsonetFacilityMgtCompliances OBJECT IDENTIFIER ::= { optixsonetFacilityMgtConformance 2 } -- 1.3.6.1.4.1.2011.2.25.4.20.2.4.2.1 basicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Enter the description of the created MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { currentObjectGroup } ::= { optixsonetFacilityMgtCompliances 1 } END -- -- OPTIX-SONET-TU-MIB-V2.mib --