-- -- OPTIX-SDH-PER-MIB.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Thursday, June 29, 2006 at 14:57:04 -- OPTIX-SDH-PER-MIB DEFINITIONS ::= BEGIN IMPORTS optixCommonSdh FROM OPTIX-OID-MIB SdhPerformanceEventType FROM OPTIX-SDH-TC-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF mgmt, Gauge32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DateAndTime FROM SNMPv2-TC; optixPerformance MODULE-IDENTITY LAST-UPDATED "200604141635Z" -- April 14, 2006 at 16:35 GMT ORGANIZATION "Huawei Technologies co.,Ltd." CONTACT-INFO "R&D Building Huawei Technologies Co., Ltd. Bantian, Longgang District Shenzhen, P. R. China http://www.huawei.com Zip:518129 E-mail:support@huawei.com" DESCRIPTION "This module MIB describes the Optix Perfomance." REVISION "200604151158Z" -- April 15, 2006 at 11:58 GMT DESCRIPTION "The initial revision of this MIB module." ::= { optixCommonSdh 20 } -- -- Type definitions -- RowStatus ::= INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } -- -- Node definitions -- -- ------------------------------------------------------------------------- -- Node Object Identity -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.10 perMonitorTime OBJECT IDENTIFIER ::= { optixPerformance 10 } -- Event report event(REP) -- 1.3.6.1.4.1.2011.2.25.3.10.20.10.10 per15mMonitorTime OBJECT IDENTIFIER ::= { perMonitorTime 10 } -- ------------------------------------------------------------------------- -- Date and time of PM 15 minutes(or one day) period beginning( or end) -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.10.10.10 per15mMonitorStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Start date and time of 15 minutes PM period.When system enter the per15mMonitorStartTime,15 minutes PM starts.the per15mMonitorStartTime should not ealier than current date and time, specially,when it is equal to 1990-00-00 00:00:00,15 minutes PM starts immediately.reset the per15mMonitorStartTime will terminate current 15 minutes PM period.When system enter the per15mMonitorEndTime, the per15mMonitorStartTime will be reset to zero." ::= { per15mMonitorTime 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.10.10.20 per15mMonitorEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "End date and time of 15 minutes PM period.you need set the per15mMonitorStartTime before set the per15mMonitorEndTime,and per15mMonitorStartTime should earlier than the per15mMonitorEndTime,specially,when the per15mMonitorEndTime is equal to 1990-00-00 00:00:00,15 minutes PM ends immediately. When system enter the per15mMonitorEndTime,the per15mMonitorEndTime will be reset to zero." ::= { per15mMonitorTime 20 } -- date and time of 15 minutes PM period -- 1.3.6.1.4.1.2011.2.25.3.10.20.10.20 per24hMonitorTime OBJECT IDENTIFIER ::= { perMonitorTime 20 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.10.20.10 per24hMonitorStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Start date and time of one day PM period.When system enter the per24hMonitorStartTime,one day PM starts.the per24hMonitorStartTime should not ealier than current date and time, specially,when it is equal to 1990-00-00 00:00:00,one day PM starts immediately.reset the per24hMonitorStartTime will terminate current one day PM period.When system enter the per24hMonitorEndTime, the per24hMonitorStartTime will be reset to zero." ::= { per24hMonitorTime 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.10.20.20 per24hMonitorEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "End date and time of one day PM period.you need set the per24hMonitorStartTime before set the per24hMonitorEndTime,and per24hMonitorStartTime should earlier than the per24hMonitorEndTime,specially,when the per24hMonitorEndTime is equal to 1990-00-00 00:00:00,one day PM ends immediately. When system enter the per24hMonitorEndTime,the per24hMonitorEndTime will be reset to zero." ::= { per24hMonitorTime 20 } -- Performance monitor date and time -- 1.3.6.1.4.1.2011.2.25.3.10.20.20 perMonitorData OBJECT IDENTIFIER ::= { optixPerformance 20 } -- date and time of one day PM period -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10 per15mMonitoring OBJECT IDENTIFIER ::= { perMonitorData 10 } -- ------------------------------------------------------------------------- -- 15 minutes PM period current data table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10 per15mCurrentDataTable OBJECT-TYPE SYNTAX SEQUENCE OF Per15mCurrentDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period current data table" ::= { per15mMonitoring 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10.1 per15mCurrentDataEntry OBJECT-TYPE SYNTAX Per15mCurrentDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period current data entry" INDEX { per15mCurrentDataBoardNo, per15mCurrentDataOpticalPort, per15mCurrentDataPathNumber, per15mCurrentDataEventID } ::= { per15mCurrentDataTable 1 } Per15mCurrentDataEntry ::= SEQUENCE { per15mCurrentDataBoardNo Gauge32, per15mCurrentDataOpticalPort Gauge32, per15mCurrentDataPathNumber Gauge32, per15mCurrentDataEventID SdhPerformanceEventType, per15mCurrentDataStartTime DateAndTime, per15mCurrentDataValue Gauge32, per15mCurrentDataReset INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10.1.1 per15mCurrentDataBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per15mCurrentDataEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10.1.2 per15mCurrentDataOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per15mCurrentDataEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10.1.3 per15mCurrentDataPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per15mCurrentDataEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10.1.4 per15mCurrentDataEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per15mCurrentDataEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10.1.5 per15mCurrentDataStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "start date and time: start date and time of current 15 minutes PM period." ::= { per15mCurrentDataEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10.1.6 per15mCurrentDataValue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current data value: value of current 15 minutes PM period register.the units of value vary as the PM event,fo example,the unit of RSUAS is 'second',while the unit of RSBBE is 'count'." ::= { per15mCurrentDataEntry 6 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.10.1.7 per15mCurrentDataReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Current data reset: reset value of current 15 minutes PM period register to zero." ::= { per15mCurrentDataEntry 7 } -- ------------------------------------------------------------------------- -- 15 minutes PM period historic data table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20 per15mHistoryDataTable OBJECT-TYPE SYNTAX SEQUENCE OF Per15mHistoryDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period historic data table" ::= { per15mMonitoring 20 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20.1 per15mHistoryDataEntry OBJECT-TYPE SYNTAX Per15mHistoryDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period historic data entry" INDEX { per15mHistoryDataBoardNo, per15mHistoryDataOpticalPort, per15mHistoryDataPathNumber, per15mHistoryDataEventID, per15mHistoryDataStartTime } ::= { per15mHistoryDataTable 1 } Per15mHistoryDataEntry ::= SEQUENCE { per15mHistoryDataBoardNo Gauge32, per15mHistoryDataOpticalPort Gauge32, per15mHistoryDataPathNumber Gauge32, per15mHistoryDataEventID SdhPerformanceEventType, per15mHistoryDataStartTime DateAndTime, per15mHistoryDataValue Gauge32, per15mHistoryDataReset INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20.1.1 per15mHistoryDataBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per15mHistoryDataEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20.1.2 per15mHistoryDataOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per15mHistoryDataEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20.1.3 per15mHistoryDataPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per15mHistoryDataEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20.1.4 per15mHistoryDataEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per15mHistoryDataEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20.1.5 per15mHistoryDataStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "start date and time: start date and time of special 15 minutes PM period." ::= { per15mHistoryDataEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20.1.6 per15mHistoryDataValue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Historic data value: value of special 15 minutes PM period register.the units of value vary as the PM event,fo example,the unit of RSUAS is 'second',while the unit of RSBBE is 'count'." ::= { per15mHistoryDataEntry 6 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.10.20.1.7 per15mHistoryDataReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Historic data reset: reset value of special 15 minutes PM period register to zero." ::= { per15mHistoryDataEntry 7 } -- 15 minutes PM -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20 per24hMonitoring OBJECT IDENTIFIER ::= { perMonitorData 20 } -- ------------------------------------------------------------------------- -- one day PM period historic data table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20 per24hHistoryDataTable OBJECT-TYPE SYNTAX SEQUENCE OF Per24hHistoryDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period historic data table" ::= { per24hMonitoring 20 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20.1 per24hHistoryDataEntry OBJECT-TYPE SYNTAX Per24hHistoryDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period historic data entry" INDEX { per24hHistoryDataBoardNo, per24hHistoryDataOpticalPort, per24hHistoryDataPathNumber, per24hHistoryDataEventID, per24hHistoryDataStartTime } ::= { per24hHistoryDataTable 1 } Per24hHistoryDataEntry ::= SEQUENCE { per24hHistoryDataBoardNo Gauge32, per24hHistoryDataOpticalPort Gauge32, per24hHistoryDataPathNumber Gauge32, per24hHistoryDataEventID SdhPerformanceEventType, per24hHistoryDataStartTime DateAndTime, per24hHistoryDataValue Gauge32, per24hHistoryDataReset INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20.1.1 per24hHistoryDataBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per24hHistoryDataEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20.1.2 per24hHistoryDataOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per24hHistoryDataEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20.1.3 per24hHistoryDataPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per24hHistoryDataEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20.1.4 per24hHistoryDataEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per24hHistoryDataEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20.1.5 per24hHistoryDataStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "start date and time: start date and time of special one day PM period." ::= { per24hHistoryDataEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20.1.6 per24hHistoryDataValue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Historic data value: value of special one day PM period register.the units of value vary as the PM event,fo example,the unit of RSUAS is 'second',while the unit of RSBBE is 'count'." ::= { per24hHistoryDataEntry 6 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.20.1.7 per24hHistoryDataReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Historic data reset: reset value of special one day PM period register to zero." ::= { per24hHistoryDataEntry 7 } -- ------------------------------------------------------------------------- -- one day PM period current data table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10 per24hCurrentDataTable OBJECT-TYPE SYNTAX SEQUENCE OF Per24hCurrentDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period current data table" ::= { per24hMonitoring 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10.1 per24hCurrentDataEntry OBJECT-TYPE SYNTAX Per24hCurrentDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period current data entry" INDEX { per24hCurrentDataBoardNo, per24hCurrentDataOpticalPort, per24hCurrentDataPathNumber, per24hCurrentDataEventID } ::= { per24hCurrentDataTable 1 } Per24hCurrentDataEntry ::= SEQUENCE { per24hCurrentDataBoardNo Gauge32, per24hCurrentDataOpticalPort Gauge32, per24hCurrentDataPathNumber Gauge32, per24hCurrentDataEventID SdhPerformanceEventType, per24hCurrentDataStartTime DateAndTime, per24hCurrentDataValue Gauge32, per24hCurrentDataReset INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10.1.1 per24hCurrentDataBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per24hCurrentDataEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10.1.2 per24hCurrentDataOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per24hCurrentDataEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10.1.3 per24hCurrentDataPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per24hCurrentDataEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10.1.4 per24hCurrentDataEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per24hCurrentDataEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10.1.5 per24hCurrentDataStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "start date and time: start date and time of current one day PM period." ::= { per24hCurrentDataEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10.1.6 per24hCurrentDataValue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current data value: value of current one day PM period register.the units of value vary as the PM event,fo example,the unit of RSUAS is 'second',while the unit of RSBBE is 'count'." ::= { per24hCurrentDataEntry 6 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.20.20.10.1.7 per24hCurrentDataReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Current data reset: reset value of current one day PM period register to zero." ::= { per24hCurrentDataEntry 7 } -- Performance monitor data -- 1.3.6.1.4.1.2011.2.25.3.10.20.30 perThreshold OBJECT IDENTIFIER ::= { optixPerformance 30 } -- one day PM -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10 per15mThreshold OBJECT IDENTIFIER ::= { perThreshold 10 } -- ------------------------------------------------------------------------- -- 15 minutes PM period threshold table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10 per15mThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF Per15mThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period threshold table" ::= { per15mThreshold 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10.1 per15mThresholdEntry OBJECT-TYPE SYNTAX Per15mThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period threshold entry" INDEX { per15mThresholdBoardNo, per15mThresholdOpticalPort, per15mThresholdPathNumber, per15mThresholdEventID } ::= { per15mThresholdTable 1 } Per15mThresholdEntry ::= SEQUENCE { per15mThresholdBoardNo Gauge32, per15mThresholdOpticalPort Gauge32, per15mThresholdPathNumber Gauge32, per15mThresholdEventID SdhPerformanceEventType, per15mThresholdHighValue Gauge32, per15mThresholdLowValue Gauge32, per15mThresholdReset INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10.1.1 per15mThresholdBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per15mThresholdEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10.1.2 per15mThresholdOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per15mThresholdEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10.1.3 per15mThresholdPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per15mThresholdEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10.1.4 per15mThresholdEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per15mThresholdEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10.1.5 per15mThresholdHighValue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "High threshold value: some parameters have two thresholds,such as RSBBE, while others have single threshold,such as RSSES." ::= { per15mThresholdEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10.1.6 per15mThresholdLowValue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Low threshold value: specially,some parameters have single threshold, so their Low threshold should always be zero." ::= { per15mThresholdEntry 6 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.10.10.1.7 per15mThresholdReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold reset: reset both high threshold and low threshold(if has)." ::= { per15mThresholdEntry 7 } -- threshold of 15 minutes PM period -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20 per24hThreshold OBJECT IDENTIFIER ::= { perThreshold 20 } -- ------------------------------------------------------------------------- -- one day PM period threshold table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20.10 per24hThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF Per24hThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period threshold table" ::= { per24hThreshold 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20.10.1 per24hThresholdEntry OBJECT-TYPE SYNTAX Per24hThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period threshold entry" INDEX { per24hThresholdBoardNo, per24hThresholdOpticalPort, per24hThresholdPathNumber, per24hThresholdEventID } ::= { per24hThresholdTable 1 } Per24hThresholdEntry ::= SEQUENCE { per24hThresholdReset INTEGER, per24hThresholdValue Gauge32, per24hThresholdEventID SdhPerformanceEventType, per24hThresholdPathNumber Gauge32, per24hThresholdOpticalPort Gauge32, per24hThresholdBoardNo Gauge32 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20.10.1.6 per24hThresholdReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold reset: reset threshold." ::= { per24hThresholdEntry 6 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20.10.1.5 per24hThresholdValue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold value: all parameters have only one threshold value for one day PM period." ::= { per24hThresholdEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20.10.1.4 per24hThresholdEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per24hThresholdEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20.10.1.3 per24hThresholdPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per24hThresholdEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20.10.1.2 per24hThresholdOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per24hThresholdEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.30.20.10.1.1 per24hThresholdBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per24hThresholdEntry 1 } -- Performance threshold -- 1.3.6.1.4.1.2011.2.25.3.10.20.40 perStatus OBJECT IDENTIFIER ::= { optixPerformance 40 } -- threshold of one day PM period -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10 perStatusControl OBJECT IDENTIFIER ::= { perStatus 10 } -- PM threshold crossing status -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10 per15mStatusControl OBJECT IDENTIFIER ::= { perStatusControl 10 } -- ------------------------------------------------------------------------- -- 15 minutes PM period monitor status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.10 per15mMonitorStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per15mMonitorStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period monitor status table." ::= { per15mStatusControl 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.10.1 per15mMonitorStatusEntry OBJECT-TYPE SYNTAX Per15mMonitorStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period monitor status entry." INDEX { per15mMonitorStatusBoardNo, per15mMonitorStatusOpticalPort, per15mMonitorStatusPathNumber, per15mMonitorStatusEventID } ::= { per15mMonitorStatusTable 1 } Per15mMonitorStatusEntry ::= SEQUENCE { per15mMonitorStatusBoardNo Gauge32, per15mMonitorStatusOpticalPort Gauge32, per15mMonitorStatusPathNumber Gauge32, per15mMonitorStatusEventID SdhPerformanceEventType, per15mMonitorStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.10.1.1 per15mMonitorStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per15mMonitorStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.10.1.2 per15mMonitorStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per15mMonitorStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.10.1.3 per15mMonitorStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per15mMonitorStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.10.1.4 per15mMonitorStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per15mMonitorStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.10.1.5 per15mMonitorStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Monitor status: when monitor status is disabled,current data register is reset to zero and will not increase any more until monitor status be enabled. The default monitor status is enable." ::= { per15mMonitorStatusEntry 5 } -- ------------------------------------------------------------------------- -- 15 minutes PM period pause status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.20 per15mPauseStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per15mPauseStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period pause status table." ::= { per15mStatusControl 20 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.20.1 per15mPauseStatusEntry OBJECT-TYPE SYNTAX Per15mPauseStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period pause status entry." INDEX { per15mPauseStatusBoardNo, per15mPauseStatusOpticalPort, per15mPauseStatusPathNumber, per15mPauseStatusEventID } ::= { per15mPauseStatusTable 1 } Per15mPauseStatusEntry ::= SEQUENCE { per15mPauseStatusBoardNo Gauge32, per15mPauseStatusOpticalPort Gauge32, per15mPauseStatusPathNumber Gauge32, per15mPauseStatusEventID SdhPerformanceEventType, per15mPauseStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.20.1.1 per15mPauseStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per15mPauseStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.20.1.2 per15mPauseStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per15mPauseStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.20.1.3 per15mPauseStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per15mPauseStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.20.1.4 per15mPauseStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per15mPauseStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.20.1.5 per15mPauseStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Pause status: when pause status is disabled,current data register will not increase (but will reset to zero)any more until pause status be enabled.The default monitor status is disable." ::= { per15mPauseStatusEntry 5 } -- ------------------------------------------------------------------------- -- 15 minutes PM period threshold status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.30 per15mThresholdStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per15mThresholdStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period threshold status table" ::= { per15mStatusControl 30 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.30.1 per15mThresholdStatusEntry OBJECT-TYPE SYNTAX Per15mThresholdStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period threshold status entry" INDEX { per15mThresholdStatusBoardNo, per15mThresholdStatusOpticalPort, per15mThresholdStatusPathNumber, per15mThresholdStatusEventID } ::= { per15mThresholdStatusTable 1 } Per15mThresholdStatusEntry ::= SEQUENCE { per15mThresholdStatusBoardNo Gauge32, per15mThresholdStatusOpticalPort Gauge32, per15mThresholdStatusPathNumber Gauge32, per15mThresholdStatusEventID SdhPerformanceEventType, per15mThresholdStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.30.1.1 per15mThresholdStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per15mThresholdStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.30.1.2 per15mThresholdStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per15mThresholdStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.30.1.3 per15mThresholdStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per15mThresholdStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.30.1.4 per15mThresholdStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per15mThresholdStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.30.1.5 per15mThresholdStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold status:when threshold status is disabled,no threshold crossing alert will be reported even though threshold is crossed.The default threshold status is enable." ::= { per15mThresholdStatusEntry 5 } -- ------------------------------------------------------------------------- -- 15 minutes PM period automatic report(REP) status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.40 per15mAutoReportStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per15mAutoReportStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period automatic report(REP) status table" ::= { per15mStatusControl 40 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.40.1 per15mAutoReportStatusEntry OBJECT-TYPE SYNTAX Per15mAutoReportStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period automatic report(REP) status entry" INDEX { per15mAutoReportStatusBoardNo, per15mAutoReportStatusOpticalPort, per15mAutoReportStatusPathNumber, per15mAutoReportStatusEventID } ::= { per15mAutoReportStatusTable 1 } Per15mAutoReportStatusEntry ::= SEQUENCE { per15mAutoReportStatusBoardNo Gauge32, per15mAutoReportStatusOpticalPort Gauge32, per15mAutoReportStatusPathNumber Gauge32, per15mAutoReportStatusEventID SdhPerformanceEventType, per15mAutoReportStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.40.1.1 per15mAutoReportStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per15mAutoReportStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.40.1.2 per15mAutoReportStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per15mAutoReportStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.40.1.3 per15mAutoReportStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per15mAutoReportStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.40.1.4 per15mAutoReportStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per15mAutoReportStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.10.40.1.5 per15mAutoReportStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Automatic report status: if automatic report status is enabled, when PM period expired, NE will report none-zero current data register value to user.The default automatic report status is enable ." ::= { per15mAutoReportStatusEntry 5 } -- PM status control of 15 minutes PM period -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20 per24hStatusControl OBJECT IDENTIFIER ::= { perStatusControl 20 } -- ------------------------------------------------------------------------- -- one day PM period monitor status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.10 per24hMonitorStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per24hMonitorStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period monitor status table." ::= { per24hStatusControl 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.10.1 per24hMonitorStatusEntry OBJECT-TYPE SYNTAX Per24hMonitorStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period monitor status entry." INDEX { per24hMonitorStatusBoardNo, per24hMonitorStatusOpticalPort, per24hMonitorStatusPathNumber, per24hMonitorStatusEventID } ::= { per24hMonitorStatusTable 1 } Per24hMonitorStatusEntry ::= SEQUENCE { per24hMonitorStatusBoardNo Gauge32, per24hMonitorStatusOpticalPort Gauge32, per24hMonitorStatusPathNumber Gauge32, per24hMonitorStatusEventID SdhPerformanceEventType, per24hMonitorStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.10.1.1 per24hMonitorStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per24hMonitorStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.10.1.2 per24hMonitorStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per24hMonitorStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.10.1.3 per24hMonitorStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per24hMonitorStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.10.1.4 per24hMonitorStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per24hMonitorStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.10.1.5 per24hMonitorStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Monitor status: when monitor status is disabled,current data register is reset to zero and will not increase any more until monitor status be enabled.The default monitor status is enable." ::= { per24hMonitorStatusEntry 5 } -- ------------------------------------------------------------------------- -- one day PM period pause status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.20 per24hPauseStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per24hPauseStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period pause status table." ::= { per24hStatusControl 20 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.20.1 per24hPauseStatusEntry OBJECT-TYPE SYNTAX Per24hPauseStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period pause status entry." INDEX { per24hPauseStatusBoardNo, per24hPauseStatusOpticalPort, per24hPauseStatusPathNumber, per24hPauseStatusEventID } ::= { per24hPauseStatusTable 1 } Per24hPauseStatusEntry ::= SEQUENCE { per24hPauseStatusBoardNo Gauge32, per24hPauseStatusOpticalPort Gauge32, per24hPauseStatusPathNumber Gauge32, per24hPauseStatusEventID SdhPerformanceEventType, per24hPauseStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.20.1.1 per24hPauseStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per24hPauseStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.20.1.2 per24hPauseStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per24hPauseStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.20.1.3 per24hPauseStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per24hPauseStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.20.1.4 per24hPauseStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per24hPauseStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.20.1.5 per24hPauseStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Pause status: when pause status is disabled,current data register will not increase (but will reset to zero)any more until pause status be enabled.The default monitor status is disable." ::= { per24hPauseStatusEntry 5 } -- ------------------------------------------------------------------------- -- one day PM period threshold status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.30 per24hThresholdStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per24hThresholdStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period threshold status table." ::= { per24hStatusControl 30 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.30.1 per24hThresholdStatusEntry OBJECT-TYPE SYNTAX Per24hThresholdStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period threshold status entry." INDEX { per24hThresholdStatusBoardNo, per24hThresholdStatusOpticalPort, per24hThresholdStatusPathNumber, per24hThresholdStatusEventID } ::= { per24hThresholdStatusTable 1 } Per24hThresholdStatusEntry ::= SEQUENCE { per24hThresholdStatusBoardNo Gauge32, per24hThresholdStatusOpticalPort Gauge32, per24hThresholdStatusPathNumber Gauge32, per24hThresholdStatusEventID SdhPerformanceEventType, per24hThresholdStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.30.1.1 per24hThresholdStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per24hThresholdStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.30.1.2 per24hThresholdStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per24hThresholdStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.30.1.3 per24hThresholdStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per24hThresholdStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.30.1.4 per24hThresholdStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per24hThresholdStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.30.1.5 per24hThresholdStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold status:when threshold status is disabled,no threshold crossing alert will be reported even though threshold is crossed.The default threshold status is enable." ::= { per24hThresholdStatusEntry 5 } -- ------------------------------------------------------------------------- -- one day PM period automatic report(REP) status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.40 per24hAutoReportStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per24hAutoReportStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period automatic report(REP) status table." ::= { per24hStatusControl 40 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.40.1 per24hAutoReportStatusEntry OBJECT-TYPE SYNTAX Per24hAutoReportStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period automatic report(REP) status entry." INDEX { per24hAutoReportStatusBoardNo, per24hAutoReportStatusOpticalPort, per24hAutoReportStatusPathNumber, per24hAutoReportStatusEventID } ::= { per24hAutoReportStatusTable 1 } Per24hAutoReportStatusEntry ::= SEQUENCE { per24hAutoReportStatusBoardNo Gauge32, per24hAutoReportStatusOpticalPort Gauge32, per24hAutoReportStatusPathNumber Gauge32, per24hAutoReportStatusEventID SdhPerformanceEventType, per24hAutoReportStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.40.1.1 per24hAutoReportStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per24hAutoReportStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.40.1.2 per24hAutoReportStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per24hAutoReportStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.40.1.3 per24hAutoReportStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per24hAutoReportStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.40.1.4 per24hAutoReportStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per24hAutoReportStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.10.20.40.1.5 per24hAutoReportStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Automatic report status: if automatic report status is enabled, when PM period expired, NE will report none-zero current data register value to user.The default automatic report status is enable ." ::= { per24hAutoReportStatusEntry 5 } -- PM status control -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20 perThresholdCrossStatus OBJECT IDENTIFIER ::= { perStatus 20 } -- ------------------------------------------------------------------------- -- 15 minutes PM period threshold crossing status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.10 per15mThresholdCrossStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per15mThresholdCrossStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period threshold crossing status table." ::= { perThresholdCrossStatus 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.10.1 per15mThresholdCrossStatusEntry OBJECT-TYPE SYNTAX Per15mThresholdCrossStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "15 minutes PM period threshold crossing status entry." INDEX { per15mThresholdCrossStatusBoardNo, per15mThresholdCrossStatusOpticalPort, per15mThresholdCrossStatusPathNumber, per15mThresholdCrossStatusEventID } ::= { per15mThresholdCrossStatusTable 1 } Per15mThresholdCrossStatusEntry ::= SEQUENCE { per15mThresholdCrossStatusBoardNo Gauge32, per15mThresholdCrossStatusOpticalPort Gauge32, per15mThresholdCrossStatusPathNumber Gauge32, per15mThresholdCrossStatusEventID SdhPerformanceEventType, per15mThresholdCrossStatus INTEGER } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.10.1.1 per15mThresholdCrossStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per15mThresholdCrossStatusEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.10.1.2 per15mThresholdCrossStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per15mThresholdCrossStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.10.1.3 per15mThresholdCrossStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per15mThresholdCrossStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.10.1.4 per15mThresholdCrossStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per15mThresholdCrossStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.10.1.5 per15mThresholdCrossStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), crossed(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold crossing status:normal-threshold was not crossed,crossed -threshold was crossed." ::= { per15mThresholdCrossStatusEntry 5 } -- ------------------------------------------------------------------------- -- one day PM period threshold crossing status table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.20 per24hThresholdCrossStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Per24hThresholdCrossStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period threshold crossing status table." ::= { perThresholdCrossStatus 20 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.20.1 per24hThresholdCrossStatusEntry OBJECT-TYPE SYNTAX Per24hThresholdCrossStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "one day PM period threshold crossing status entry." INDEX { per24hThresholdCrossStatusBoardNo, per24hThresholdCrossStatusOpticalPort, per24hThresholdCrossStatusPathNumber, per24hThresholdCrossStatusEventID } ::= { per24hThresholdCrossStatusTable 1 } Per24hThresholdCrossStatusEntry ::= SEQUENCE { per24hThresholdCrossStatus INTEGER, per24hThresholdCrossStatusEventID SdhPerformanceEventType, per24hThresholdCrossStatusPathNumber Gauge32, per24hThresholdCrossStatusOpticalPort Gauge32, per24hThresholdCrossStatusBoardNo Gauge32 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.20.1.5 per24hThresholdCrossStatus OBJECT-TYPE SYNTAX INTEGER { normal(0), crossed(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold crossing status:normal-threshold was not crossed,crossed -threshold was crossed." ::= { per24hThresholdCrossStatusEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.20.1.4 per24hThresholdCrossStatusEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { per24hThresholdCrossStatusEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.20.1.3 per24hThresholdCrossStatusPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { per24hThresholdCrossStatusEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.20.1.2 per24hThresholdCrossStatusOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { per24hThresholdCrossStatusEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.40.20.20.1.1 per24hThresholdCrossStatusBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { per24hThresholdCrossStatusEntry 1 } -- Performance status -- 1.3.6.1.4.1.2011.2.25.3.10.20.50 perEvents OBJECT IDENTIFIER ::= { optixPerformance 50 } -- PM status control of one day PM period -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10 perUATEvent OBJECT IDENTIFIER ::= { perEvents 10 } -- ------------------------------------------------------------------------- -- UAT event(REP) table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10.10 perUATEventTable OBJECT-TYPE SYNTAX SEQUENCE OF PerUATEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "UAT event table." ::= { perUATEvent 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10.10.1 perUATEventEntry OBJECT-TYPE SYNTAX PerUATEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "UAT event entry." INDEX { perUATBoardNo, perUATOpticalPort, perUATPathNumber, perUATEventID, perUATStartTime } ::= { perUATEventTable 1 } PerUATEventEntry ::= SEQUENCE { perUATBoardNo Gauge32, perUATOpticalPort Gauge32, perUATPathNumber Gauge32, perUATEventID SdhPerformanceEventType, perUATStartTime DateAndTime, perUATEndTime DateAndTime } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10.10.1.1 perUATBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { perUATEventEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10.10.1.2 perUATOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { perUATEventEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10.10.1.3 perUATPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { perUATEventEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10.10.1.4 perUATEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { perUATEventEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10.10.1.5 perUATStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "the date and time when enter UAT." ::= { perUATEventEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.10.10.1.6 perUATEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "the date and time when exit UAT." ::= { perUATEventEntry 6 } -- PM UAT event -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20 perCSESEvent OBJECT IDENTIFIER ::= { perEvents 20 } -- ------------------------------------------------------------------------- -- CSES event(REP) table -- -- ------------------------------------------------------------------------- -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20.10 perCSESEventTable OBJECT-TYPE SYNTAX SEQUENCE OF PerCSESEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CSES event table." ::= { perCSESEvent 10 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20.10.1 perCSESEventEntry OBJECT-TYPE SYNTAX PerCSESEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CSES event entry." INDEX { perCSESBoardNo, perCSESOpticalPort, perCSESPathNumber, perCSESEventID, perCSESStartTime } ::= { perCSESEventTable 1 } PerCSESEventEntry ::= SEQUENCE { perCSESKeepTime Gauge32, perCSESStartTime DateAndTime, perCSESEventID SdhPerformanceEventType, perCSESPathNumber Gauge32, perCSESOpticalPort Gauge32, perCSESBoardNo Gauge32 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20.10.1.6 perCSESKeepTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "the count of CSES continues." ::= { perCSESEventEntry 6 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20.10.1.5 perCSESStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "the date and time when enter CSES." ::= { perCSESEventEntry 5 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20.10.1.4 perCSESEventID OBJECT-TYPE SYNTAX SdhPerformanceEventType MAX-ACCESS read-only STATUS current DESCRIPTION "Event ID:values depend on type of card" ::= { perCSESEventEntry 4 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20.10.1.3 perCSESPathNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Path No.:values depend on type of card" ::= { perCSESEventEntry 3 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20.10.1.2 perCSESOpticalPort OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Optical port No.:values depend on type of card" ::= { perCSESEventEntry 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.50.20.10.1.1 perCSESBoardNo OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Card No.:between 1 and 20" ::= { perCSESEventEntry 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.90 optixCommonSdhConformance OBJECT IDENTIFIER ::= { optixPerformance 90 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.90.1 optixCommonSdhGroups OBJECT IDENTIFIER ::= { optixCommonSdhConformance 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.90.1.1 currentObjectGroup OBJECT-GROUP OBJECTS { per15mMonitorEndTime, per24hMonitorEndTime, per24hMonitorStartTime, per24hHistoryDataReset, per24hHistoryDataValue, per24hHistoryDataStartTime, per24hHistoryDataEventID, per24hHistoryDataPathNumber, per24hHistoryDataOpticalPort, per24hHistoryDataBoardNo, per24hCurrentDataReset, per24hCurrentDataValue, per24hCurrentDataStartTime, per24hCurrentDataEventID, per24hCurrentDataPathNumber, per24hCurrentDataOpticalPort, per24hCurrentDataBoardNo, per15mHistoryDataReset, per15mHistoryDataValue, per15mHistoryDataStartTime, per15mHistoryDataEventID, per15mHistoryDataPathNumber, per15mHistoryDataOpticalPort, per15mHistoryDataBoardNo, per15mCurrentDataReset, per15mCurrentDataValue, per15mCurrentDataStartTime, per15mCurrentDataEventID, per15mCurrentDataPathNumber, per15mCurrentDataOpticalPort, per15mCurrentDataBoardNo, per24hThresholdReset, per24hThresholdValue, per24hThresholdEventID, per24hThresholdPathNumber, per24hThresholdOpticalPort, per24hThresholdBoardNo, per15mThresholdReset, per15mThresholdLowValue, per15mThresholdHighValue, per15mThresholdEventID, per15mThresholdPathNumber, per15mThresholdOpticalPort, per15mThresholdBoardNo, per24hThresholdCrossStatus, per24hThresholdCrossStatusEventID, per24hThresholdCrossStatusPathNumber, per24hThresholdCrossStatusOpticalPort, per24hThresholdCrossStatusBoardNo, per15mThresholdCrossStatus, per15mThresholdCrossStatusEventID, per15mThresholdCrossStatusPathNumber, per15mThresholdCrossStatusOpticalPort, per15mThresholdCrossStatusBoardNo, per24hAutoReportStatus, per24hAutoReportStatusEventID, per24hAutoReportStatusPathNumber, per24hAutoReportStatusOpticalPort, per24hAutoReportStatusBoardNo, per24hThresholdStatus, per24hThresholdStatusEventID, per24hThresholdStatusPathNumber, per24hThresholdStatusOpticalPort, per24hThresholdStatusBoardNo, per24hPauseStatus, per24hPauseStatusEventID, per24hPauseStatusPathNumber, per24hPauseStatusOpticalPort, per24hPauseStatusBoardNo, per24hMonitorStatus, per24hMonitorStatusEventID, per24hMonitorStatusPathNumber, per24hMonitorStatusOpticalPort, per24hMonitorStatusBoardNo, per15mAutoReportStatus, per15mAutoReportStatusEventID, per15mAutoReportStatusPathNumber, per15mAutoReportStatusOpticalPort, per15mAutoReportStatusBoardNo, per15mThresholdStatus, per15mThresholdStatusEventID, per15mThresholdStatusPathNumber, per15mThresholdStatusOpticalPort, per15mThresholdStatusBoardNo, per15mPauseStatus, per15mPauseStatusEventID, per15mPauseStatusPathNumber, per15mPauseStatusOpticalPort, per15mPauseStatusBoardNo, per15mMonitorStatus, per15mMonitorStatusEventID, per15mMonitorStatusPathNumber, per15mMonitorStatusOpticalPort, per15mMonitorStatusBoardNo, perCSESKeepTime, perCSESStartTime, perCSESEventID, perCSESPathNumber, perCSESOpticalPort, perCSESBoardNo, perUATEndTime, perUATStartTime, perUATEventID, perUATPathNumber, perUATOpticalPort, per15mMonitorStartTime, perUATBoardNo } STATUS current DESCRIPTION "Enter the description of the created OBJECT-GROUP." ::= { optixCommonSdhGroups 1 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.90.2 optixCommonSdhCompliances OBJECT IDENTIFIER ::= { optixCommonSdhConformance 2 } -- 1.3.6.1.4.1.2011.2.25.3.10.20.90.2.1 optixCommonSdhbasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Enter the description of the created MODULE-COMPLIANCE." MODULE -- this module MANDATORY-GROUPS { currentObjectGroup } ::= { optixCommonSdhCompliances 1 } END -- -- OPTIX-SDH-PER-MIB.mib --