Nortel-MsCarrier-MscPassport-X25TraceRcvrMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 mscPassportMIBs FROM Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB Hex, NonReplicated, HexString, EnterpriseDateAndTime, DigitString FROM Nortel-MsCarrier-MscPassport-TextualConventionsMIB mscTraceIndex, mscTraceRcvr, mscTraceSessionIndex, mscTraceRcvrIndex, mscTraceSession FROM Nortel-MsCarrier-MscPassport-TraceBaseMIB; -- LAST-UPDATED "9909010000Z" -- ORGANIZATION "Nortel Networks" -- CONTACT-INFO " -- Nortel Carrier Data Network Management -- -- Postal: P.O. Box 3511, Station C -- Ottawa, Ontario -- Canada K1Y 4H7 -- -- via the WEB: http://www.nortelnetworks.com -- select 'Contact Us' from the menu -- -- via phone: 1-800-4NORTEL" -- DESCRIPTION -- "The module describing the Nortel MsCarrier MscPassport -- X25TraceRcvr Enterprise MIB." x25TraceRcvrMIB OBJECT IDENTIFIER ::= { mscPassportMIBs 62 } -- Trace Rcvr/ X25 -- This component identifies the access method used by the receiver of -- the trace data as X.25. mscTraceRcvrX25 OBJECT IDENTIFIER ::= { mscTraceRcvr 2 } mscTraceRcvrX25RowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscTraceRcvrX25 components." ::= { mscTraceRcvrX25 1 } mscTraceRcvrX25RowStatusEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscTraceRcvrX25 component." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index } ::= { mscTraceRcvrX25RowStatusTable 1 } MscTraceRcvrX25RowStatusEntry ::= SEQUENCE { mscTraceRcvrX25RowStatus RowStatus, mscTraceRcvrX25ComponentName DisplayString, mscTraceRcvrX25StorageType StorageType, mscTraceRcvrX25Index NonReplicated } mscTraceRcvrX25RowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscTraceRcvrX25 components. These components can be added and deleted." ::= { mscTraceRcvrX25RowStatusEntry 1 } mscTraceRcvrX25ComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscTraceRcvrX25RowStatusEntry 2 } mscTraceRcvrX25StorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscTraceRcvrX25 tables." ::= { mscTraceRcvrX25RowStatusEntry 4 } mscTraceRcvrX25Index OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscTraceRcvrX25 tables." ::= { mscTraceRcvrX25RowStatusEntry 10 } -- Trace Rcvr/ X25 DataNetworkAddress -- This component defines the calling end of the trace connection. It -- includes the set of attributes which apply to a Vc connection to an -- X.25 trace receiver. mscTraceRcvrX25Dna OBJECT IDENTIFIER ::= { mscTraceRcvrX25 2 } mscTraceRcvrX25DnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscTraceRcvrX25Dna components." ::= { mscTraceRcvrX25Dna 1 } mscTraceRcvrX25DnaRowStatusEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscTraceRcvrX25Dna component." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DnaIndex } ::= { mscTraceRcvrX25DnaRowStatusTable 1 } MscTraceRcvrX25DnaRowStatusEntry ::= SEQUENCE { mscTraceRcvrX25DnaRowStatus RowStatus, mscTraceRcvrX25DnaComponentName DisplayString, mscTraceRcvrX25DnaStorageType StorageType, mscTraceRcvrX25DnaIndex NonReplicated } mscTraceRcvrX25DnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscTraceRcvrX25Dna components. These components cannot be added nor deleted." ::= { mscTraceRcvrX25DnaRowStatusEntry 1 } mscTraceRcvrX25DnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscTraceRcvrX25DnaRowStatusEntry 2 } mscTraceRcvrX25DnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscTraceRcvrX25Dna tables." ::= { mscTraceRcvrX25DnaRowStatusEntry 4 } mscTraceRcvrX25DnaIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscTraceRcvrX25Dna tables." ::= { mscTraceRcvrX25DnaRowStatusEntry 10 } mscTraceRcvrX25DnaAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits." ::= { mscTraceRcvrX25Dna 10 } mscTraceRcvrX25DnaAddressEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceRcvrX25DnaAddressTable." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DnaIndex } ::= { mscTraceRcvrX25DnaAddressTable 1 } MscTraceRcvrX25DnaAddressEntry ::= SEQUENCE { mscTraceRcvrX25DnaNumberingPlanIndicator INTEGER, mscTraceRcvrX25DnaDataNetworkAddress DigitString } mscTraceRcvrX25DnaNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan." DEFVAL { x121 } ::= { mscTraceRcvrX25DnaAddressEntry 1 } mscTraceRcvrX25DnaDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits." ::= { mscTraceRcvrX25DnaAddressEntry 2 } mscTraceRcvrX25DnaOutgoingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines call options for outgoing calls." ::= { mscTraceRcvrX25Dna 11 } mscTraceRcvrX25DnaOutgoingOptionsEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceRcvrX25DnaOutgoingOptionsTable." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DnaIndex } ::= { mscTraceRcvrX25DnaOutgoingOptionsTable 1 } MscTraceRcvrX25DnaOutgoingOptionsEntry ::= SEQUENCE { mscTraceRcvrX25DnaOutCalls INTEGER, mscTraceRcvrX25DnaOutDefaultPriority INTEGER, mscTraceRcvrX25DnaOutIntl INTEGER, mscTraceRcvrX25DnaOutDefaultPathSensitivity INTEGER, mscTraceRcvrX25DnaOutDefaultPathReliability INTEGER, mscTraceRcvrX25DnaOutPathReliabilityOverRide INTEGER, mscTraceRcvrX25DnaOutPathReliabilitySignal INTEGER, mscTraceRcvrX25DnaOutAccess INTEGER } mscTraceRcvrX25DnaOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component." DEFVAL { allowed } ::= { mscTraceRcvrX25DnaOutgoingOptionsEntry 1 } mscTraceRcvrX25DnaOutDefaultPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority." DEFVAL { high } ::= { mscTraceRcvrX25DnaOutgoingOptionsEntry 7 } mscTraceRcvrX25DnaOutIntl OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed." DEFVAL { allowed } ::= { mscTraceRcvrX25DnaOutgoingOptionsEntry 8 } mscTraceRcvrX25DnaOutDefaultPathSensitivity OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute specifies the default class of routing (delay/ throughput) for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). This attribute, if set to a value of throughput, specifies that the default class of routing is throughput sensitive. If set to a value of delay, then the default class of routing is delay sensitive. This attribute is obsoleted. Please refer to defaultTransferPriority for the corresponding new attribute." DEFVAL { throughput } ::= { mscTraceRcvrX25DnaOutgoingOptionsEntry 11 } mscTraceRcvrX25DnaOutDefaultPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication." DEFVAL { high } ::= { mscTraceRcvrX25DnaOutgoingOptionsEntry 14 } mscTraceRcvrX25DnaOutPathReliabilityOverRide OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end." DEFVAL { no } ::= { mscTraceRcvrX25DnaOutgoingOptionsEntry 15 } mscTraceRcvrX25DnaOutPathReliabilitySignal OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that reliability routing signaling is not used." DEFVAL { disallowed } ::= { mscTraceRcvrX25DnaOutgoingOptionsEntry 16 } mscTraceRcvrX25DnaOutAccess OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature." DEFVAL { disallowed } ::= { mscTraceRcvrX25DnaOutgoingOptionsEntry 17 } mscTraceRcvrX25DnaIncomingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the call options for incoming calls." ::= { mscTraceRcvrX25Dna 12 } mscTraceRcvrX25DnaIncomingOptionsEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceRcvrX25DnaIncomingOptionsTable." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DnaIndex } ::= { mscTraceRcvrX25DnaIncomingOptionsTable 1 } MscTraceRcvrX25DnaIncomingOptionsEntry ::= SEQUENCE { mscTraceRcvrX25DnaIncCalls INTEGER } mscTraceRcvrX25DnaIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna." DEFVAL { disallowed } ::= { mscTraceRcvrX25DnaIncomingOptionsEntry 1 } mscTraceRcvrX25DnaCallOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CallOptions group defines additional options for calls which are not specific to the direction of the call." ::= { mscTraceRcvrX25Dna 13 } mscTraceRcvrX25DnaCallOptionsEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceRcvrX25DnaCallOptionsTable." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DnaIndex } ::= { mscTraceRcvrX25DnaCallOptionsTable 1 } MscTraceRcvrX25DnaCallOptionsEntry ::= SEQUENCE { mscTraceRcvrX25DnaPacketSizes OCTET STRING, mscTraceRcvrX25DnaDefaultRecvFrmNetworkPacketSize INTEGER, mscTraceRcvrX25DnaDefaultSendToNetworkPacketSize INTEGER, mscTraceRcvrX25DnaDefaultRecvFrmNetworkThruputClass Unsigned32, mscTraceRcvrX25DnaDefaultSendToNetworkThruputClass Unsigned32, mscTraceRcvrX25DnaDefaultRecvFrmNetworkWindowSize Unsigned32, mscTraceRcvrX25DnaDefaultSendToNetworkWindowSize Unsigned32, mscTraceRcvrX25DnaPacketSizeNegotiation INTEGER, mscTraceRcvrX25DnaCugFormat INTEGER } mscTraceRcvrX25DnaPacketSizes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)" DEFVAL { '0100'H } ::= { mscTraceRcvrX25DnaCallOptionsEntry 2 } mscTraceRcvrX25DnaDefaultRecvFrmNetworkPacketSize OBJECT-TYPE SYNTAX INTEGER { n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna." DEFVAL { n2048 } ::= { mscTraceRcvrX25DnaCallOptionsEntry 3 } mscTraceRcvrX25DnaDefaultSendToNetworkPacketSize OBJECT-TYPE SYNTAX INTEGER { n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna." DEFVAL { n2048 } ::= { mscTraceRcvrX25DnaCallOptionsEntry 4 } mscTraceRcvrX25DnaDefaultRecvFrmNetworkThruputClass OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default receive throughput class, (towards the interface) for all calls using this particular Dna." DEFVAL { 10 } ::= { mscTraceRcvrX25DnaCallOptionsEntry 5 } mscTraceRcvrX25DnaDefaultSendToNetworkThruputClass OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default send throughput class (towards the network) for all calls using this particular Dna." DEFVAL { 10 } ::= { mscTraceRcvrX25DnaCallOptionsEntry 6 } mscTraceRcvrX25DnaDefaultRecvFrmNetworkWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default value for the number of data packets that can be send to the interface before any acknowledgment." DEFVAL { 1 } ::= { mscTraceRcvrX25DnaCallOptionsEntry 7 } mscTraceRcvrX25DnaDefaultSendToNetworkWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default value for the number of data packets that can be received from the interface before any acknowledgment." DEFVAL { 1 } ::= { mscTraceRcvrX25DnaCallOptionsEntry 8 } mscTraceRcvrX25DnaPacketSizeNegotiation OBJECT-TYPE SYNTAX INTEGER { endToEnd(0), local(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to local specifies that packet sizes can be negotiated locally at the interface irrespective of the setting at the remote interface. If set to endtoEnd, then the packet size negotiation is between the local and remote interface (i.e. packet sizes are the same on both interfaces)." DEFVAL { local } ::= { mscTraceRcvrX25DnaCallOptionsEntry 9 } mscTraceRcvrX25DnaCugFormat OBJECT-TYPE SYNTAX INTEGER { basic(0), extended(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long." DEFVAL { basic } ::= { mscTraceRcvrX25DnaCallOptionsEntry 10 } -- Trace Rcvr/ X25 Dna ClosedUserGroup -- The ClosedUserGroup component defines options associated with a -- national or international closed user group identifier. When a Dna is -- defined with a Cug, calls to other Dnas which do not have the same -- Cug interlockCode defined are refused. When a Dna is not defined -- with a Cug, calls to other Dnas which have any Cug interlockCode -- defined are refused. The Dna attributes outAccess and incAccess -- can override these rules. -- If this component is present, the X.25 interface which connects to -- the X.25 trace receiver must be provisioned with the same Cug -- interlockCode. mscTraceRcvrX25DnaCug OBJECT IDENTIFIER ::= { mscTraceRcvrX25Dna 2 } mscTraceRcvrX25DnaCugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscTraceRcvrX25DnaCug components." ::= { mscTraceRcvrX25DnaCug 1 } mscTraceRcvrX25DnaCugRowStatusEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscTraceRcvrX25DnaCug component." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DnaIndex, mscTraceRcvrX25DnaCugIndex } ::= { mscTraceRcvrX25DnaCugRowStatusTable 1 } MscTraceRcvrX25DnaCugRowStatusEntry ::= SEQUENCE { mscTraceRcvrX25DnaCugRowStatus RowStatus, mscTraceRcvrX25DnaCugComponentName DisplayString, mscTraceRcvrX25DnaCugStorageType StorageType, mscTraceRcvrX25DnaCugIndex Integer32 } mscTraceRcvrX25DnaCugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscTraceRcvrX25DnaCug components. These components can be added and deleted." ::= { mscTraceRcvrX25DnaCugRowStatusEntry 1 } mscTraceRcvrX25DnaCugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscTraceRcvrX25DnaCugRowStatusEntry 2 } mscTraceRcvrX25DnaCugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscTraceRcvrX25DnaCug tables." ::= { mscTraceRcvrX25DnaCugRowStatusEntry 4 } mscTraceRcvrX25DnaCugIndex OBJECT-TYPE SYNTAX Integer32 (1..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscTraceRcvrX25DnaCug tables." ::= { mscTraceRcvrX25DnaCugRowStatusEntry 10 } mscTraceRcvrX25DnaCugCugOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group." ::= { mscTraceRcvrX25DnaCug 10 } mscTraceRcvrX25DnaCugCugOptionsEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceRcvrX25DnaCugCugOptionsTable." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DnaIndex, mscTraceRcvrX25DnaCugIndex } ::= { mscTraceRcvrX25DnaCugCugOptionsTable 1 } MscTraceRcvrX25DnaCugCugOptionsEntry ::= SEQUENCE { mscTraceRcvrX25DnaCugType INTEGER, mscTraceRcvrX25DnaCugDnic DigitString, mscTraceRcvrX25DnaCugInterlockCode Unsigned32, mscTraceRcvrX25DnaCugPreferential INTEGER, mscTraceRcvrX25DnaCugOutCalls INTEGER, mscTraceRcvrX25DnaCugIncCalls INTEGER, mscTraceRcvrX25DnaCugPrivileged INTEGER } mscTraceRcvrX25DnaCugType OBJECT-TYPE SYNTAX INTEGER { national(0), international(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries." DEFVAL { national } ::= { mscTraceRcvrX25DnaCugCugOptionsEntry 1 } mscTraceRcvrX25DnaCugDnic OBJECT-TYPE SYNTAX DigitString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T." DEFVAL { '30303030'H } -- "0000" ::= { mscTraceRcvrX25DnaCugCugOptionsEntry 2 } mscTraceRcvrX25DnaCugInterlockCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode." DEFVAL { 0 } ::= { mscTraceRcvrX25DnaCugCugOptionsEntry 3 } mscTraceRcvrX25DnaCugPreferential OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that this Cug is to be used on all outgoing calls to the X.25 trace receiver." DEFVAL { yes } ::= { mscTraceRcvrX25DnaCugCugOptionsEntry 4 } mscTraceRcvrX25DnaCugOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug." DEFVAL { allowed } ::= { mscTraceRcvrX25DnaCugCugOptionsEntry 5 } mscTraceRcvrX25DnaCugIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug." DEFVAL { disallowed } ::= { mscTraceRcvrX25DnaCugCugOptionsEntry 6 } mscTraceRcvrX25DnaCugPrivileged OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug." DEFVAL { yes } ::= { mscTraceRcvrX25DnaCugCugOptionsEntry 7 } -- Trace Rcvr/ X25 DirectCall -- This component defines direct call options for the call to the X.25 -- trace receiver. The connection is initiated on receipt of a Start -- FrUni/n Trace command. mscTraceRcvrX25Dc OBJECT IDENTIFIER ::= { mscTraceRcvrX25 3 } mscTraceRcvrX25DcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscTraceRcvrX25Dc components." ::= { mscTraceRcvrX25Dc 1 } mscTraceRcvrX25DcRowStatusEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscTraceRcvrX25Dc component." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DcIndex } ::= { mscTraceRcvrX25DcRowStatusTable 1 } MscTraceRcvrX25DcRowStatusEntry ::= SEQUENCE { mscTraceRcvrX25DcRowStatus RowStatus, mscTraceRcvrX25DcComponentName DisplayString, mscTraceRcvrX25DcStorageType StorageType, mscTraceRcvrX25DcIndex NonReplicated } mscTraceRcvrX25DcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscTraceRcvrX25Dc components. These components cannot be added nor deleted." ::= { mscTraceRcvrX25DcRowStatusEntry 1 } mscTraceRcvrX25DcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscTraceRcvrX25DcRowStatusEntry 2 } mscTraceRcvrX25DcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscTraceRcvrX25Dc tables." ::= { mscTraceRcvrX25DcRowStatusEntry 4 } mscTraceRcvrX25DcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscTraceRcvrX25Dc tables." ::= { mscTraceRcvrX25DcRowStatusEntry 10 } mscTraceRcvrX25DcOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceRcvrX25DcOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Options group defines attributes associated with the SVC direct call." ::= { mscTraceRcvrX25Dc 10 } mscTraceRcvrX25DcOptionsEntry OBJECT-TYPE SYNTAX MscTraceRcvrX25DcOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceRcvrX25DcOptionsTable." INDEX { mscTraceIndex, mscTraceRcvrIndex, mscTraceRcvrX25Index, mscTraceRcvrX25DcIndex } ::= { mscTraceRcvrX25DcOptionsTable 1 } MscTraceRcvrX25DcOptionsEntry ::= SEQUENCE { mscTraceRcvrX25DcRemoteNpi INTEGER, mscTraceRcvrX25DcRemoteDna DigitString, mscTraceRcvrX25DcType INTEGER, mscTraceRcvrX25DcUserData HexString } mscTraceRcvrX25DcRemoteNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the numbering plan used for the remoteDna." DEFVAL { x121 } ::= { mscTraceRcvrX25DcOptionsEntry 3 } mscTraceRcvrX25DcRemoteDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the X.25 trace receiver which will receive the trace data." ::= { mscTraceRcvrX25DcOptionsEntry 4 } mscTraceRcvrX25DcType OBJECT-TYPE SYNTAX INTEGER { switched(0), permanentMaster(1), permanentSlave(2), permanentBackupSlave(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection." DEFVAL { switched } ::= { mscTraceRcvrX25DcOptionsEntry 6 } mscTraceRcvrX25DcUserData OBJECT-TYPE SYNTAX HexString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE." DEFVAL { ''H } -- "" ::= { mscTraceRcvrX25DcOptionsEntry 8 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Trace Session/ X25 -- This component identifies the access method used by the receiver of -- the trace data as X.25. mscTraceSessionX25 OBJECT IDENTIFIER ::= { mscTraceSession 2 } mscTraceSessionX25RowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceSessionX25RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTraceSessionX25 components." ::= { mscTraceSessionX25 1 } mscTraceSessionX25RowStatusEntry OBJECT-TYPE SYNTAX MscTraceSessionX25RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscTraceSessionX25 component." INDEX { mscTraceIndex, mscTraceSessionIndex, mscTraceSessionX25Index } ::= { mscTraceSessionX25RowStatusTable 1 } MscTraceSessionX25RowStatusEntry ::= SEQUENCE { mscTraceSessionX25RowStatus RowStatus, mscTraceSessionX25ComponentName DisplayString, mscTraceSessionX25StorageType StorageType, mscTraceSessionX25Index NonReplicated } mscTraceSessionX25RowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscTraceSessionX25 components. These components cannot be added nor deleted." ::= { mscTraceSessionX25RowStatusEntry 1 } mscTraceSessionX25ComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscTraceSessionX25RowStatusEntry 2 } mscTraceSessionX25StorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscTraceSessionX25 tables." ::= { mscTraceSessionX25RowStatusEntry 4 } mscTraceSessionX25Index OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscTraceSessionX25 tables." ::= { mscTraceSessionX25RowStatusEntry 10 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- ... Vc() -- This component defines display of general Vc dynamic attributes mscTraceSessionX25Vc OBJECT IDENTIFIER ::= { mscTraceSessionX25 2 } mscTraceSessionX25VcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceSessionX25VcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTraceSessionX25Vc components." ::= { mscTraceSessionX25Vc 1 } mscTraceSessionX25VcRowStatusEntry OBJECT-TYPE SYNTAX MscTraceSessionX25VcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscTraceSessionX25Vc component." INDEX { mscTraceIndex, mscTraceSessionIndex, mscTraceSessionX25Index, mscTraceSessionX25VcIndex } ::= { mscTraceSessionX25VcRowStatusTable 1 } MscTraceSessionX25VcRowStatusEntry ::= SEQUENCE { mscTraceSessionX25VcRowStatus RowStatus, mscTraceSessionX25VcComponentName DisplayString, mscTraceSessionX25VcStorageType StorageType, mscTraceSessionX25VcIndex NonReplicated } mscTraceSessionX25VcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscTraceSessionX25Vc components. These components cannot be added nor deleted." ::= { mscTraceSessionX25VcRowStatusEntry 1 } mscTraceSessionX25VcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscTraceSessionX25VcRowStatusEntry 2 } mscTraceSessionX25VcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscTraceSessionX25Vc tables." ::= { mscTraceSessionX25VcRowStatusEntry 4 } mscTraceSessionX25VcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscTraceSessionX25Vc tables." ::= { mscTraceSessionX25VcRowStatusEntry 10 } mscTraceSessionX25VcCadTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceSessionX25VcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to General Vc. It can be displayed only for General Vc which is created by application." ::= { mscTraceSessionX25Vc 10 } mscTraceSessionX25VcCadEntry OBJECT-TYPE SYNTAX MscTraceSessionX25VcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceSessionX25VcCadTable." INDEX { mscTraceIndex, mscTraceSessionIndex, mscTraceSessionX25Index, mscTraceSessionX25VcIndex } ::= { mscTraceSessionX25VcCadTable 1 } MscTraceSessionX25VcCadEntry ::= SEQUENCE { mscTraceSessionX25VcType INTEGER, mscTraceSessionX25VcState INTEGER, mscTraceSessionX25VcPreviousState INTEGER, mscTraceSessionX25VcDiagnosticCode Unsigned32, mscTraceSessionX25VcPreviousDiagnosticCode Unsigned32, mscTraceSessionX25VcCalledNpi INTEGER, mscTraceSessionX25VcCalledDna DigitString, mscTraceSessionX25VcCalledLcn Unsigned32, mscTraceSessionX25VcCallingNpi INTEGER, mscTraceSessionX25VcCallingDna DigitString, mscTraceSessionX25VcCallingLcn Unsigned32, mscTraceSessionX25VcAccountingEnabled INTEGER, mscTraceSessionX25VcFastSelectCall INTEGER, mscTraceSessionX25VcLocalRxPktSize INTEGER, mscTraceSessionX25VcLocalTxPktSize INTEGER, mscTraceSessionX25VcLocalTxWindowSize Unsigned32, mscTraceSessionX25VcLocalRxWindowSize Unsigned32, mscTraceSessionX25VcPathReliability INTEGER, mscTraceSessionX25VcAccountingEnd INTEGER, mscTraceSessionX25VcPriority INTEGER, mscTraceSessionX25VcSegmentSize Unsigned32, mscTraceSessionX25VcSubnetTxPktSize INTEGER, mscTraceSessionX25VcSubnetTxWindowSize Unsigned32, mscTraceSessionX25VcSubnetRxPktSize INTEGER, mscTraceSessionX25VcSubnetRxWindowSize Unsigned32, mscTraceSessionX25VcMaxSubnetPktSize Unsigned32, mscTraceSessionX25VcTransferPriorityToNetwork INTEGER, mscTraceSessionX25VcTransferPriorityFromNetwork INTEGER } mscTraceSessionX25VcType OBJECT-TYPE SYNTAX INTEGER { svc(0), pvc(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the type of call, pvc or svc. type is provided at provisioning time." ::= { mscTraceSessionX25VcCadEntry 1 } mscTraceSessionX25VcState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4." ::= { mscTraceSessionX25VcCadEntry 2 } mscTraceSessionX25VcPreviousState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing." ::= { mscTraceSessionX25VcCadEntry 3 } mscTraceSessionX25VcDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { mscTraceSessionX25VcCadEntry 4 } mscTraceSessionX25VcPreviousDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { mscTraceSessionX25VcCadEntry 5 } mscTraceSessionX25VcCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the called end." ::= { mscTraceSessionX25VcCadEntry 6 } mscTraceSessionX25VcCalledDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection." ::= { mscTraceSessionX25VcCadEntry 7 } mscTraceSessionX25VcCalledLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information." ::= { mscTraceSessionX25VcCadEntry 8 } mscTraceSessionX25VcCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the calling end." ::= { mscTraceSessionX25VcCadEntry 9 } mscTraceSessionX25VcCallingDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the calling end." ::= { mscTraceSessionX25VcCadEntry 10 } mscTraceSessionX25VcCallingLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the calling end." ::= { mscTraceSessionX25VcCadEntry 11 } mscTraceSessionX25VcAccountingEnabled OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options." ::= { mscTraceSessionX25VcCadEntry 12 } mscTraceSessionX25VcFastSelectCall OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays that this is a fast select call." ::= { mscTraceSessionX25VcCadEntry 13 } mscTraceSessionX25VcLocalRxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of send packets." ::= { mscTraceSessionX25VcCadEntry 14 } mscTraceSessionX25VcLocalTxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of send packets." ::= { mscTraceSessionX25VcCadEntry 15 } mscTraceSessionX25VcLocalTxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size." ::= { mscTraceSessionX25VcCadEntry 16 } mscTraceSessionX25VcLocalRxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes." ::= { mscTraceSessionX25VcCadEntry 17 } mscTraceSessionX25VcPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the path reliability." ::= { mscTraceSessionX25VcCadEntry 19 } mscTraceSessionX25VcAccountingEnd OBJECT-TYPE SYNTAX INTEGER { callingEnd(0), calledEnd(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record." ::= { mscTraceSessionX25VcCadEntry 20 } mscTraceSessionX25VcPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the call is a normal or a high priority call." ::= { mscTraceSessionX25VcCadEntry 21 } mscTraceSessionX25VcSegmentSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received." ::= { mscTraceSessionX25VcCadEntry 22 } mscTraceSessionX25VcSubnetTxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of the data packets on this Vc." ::= { mscTraceSessionX25VcCadEntry 23 } mscTraceSessionX25VcSubnetTxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the current send window size of Vc." ::= { mscTraceSessionX25VcCadEntry 24 } mscTraceSessionX25VcSubnetRxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of receive packets." ::= { mscTraceSessionX25VcCadEntry 25 } mscTraceSessionX25VcSubnetRxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes." ::= { mscTraceSessionX25VcCadEntry 26 } mscTraceSessionX25VcMaxSubnetPktSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the maximum packet size allowed on Vc." ::= { mscTraceSessionX25VcCadEntry 27 } mscTraceSessionX25VcTransferPriorityToNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the priority in which data is transferred to the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput." ::= { mscTraceSessionX25VcCadEntry 28 } mscTraceSessionX25VcTransferPriorityFromNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the priority in which data is transferred from the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, and the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, and the routing metric is set to throughput." ::= { mscTraceSessionX25VcCadEntry 29 } mscTraceSessionX25VcIntdTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceSessionX25VcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued." ::= { mscTraceSessionX25Vc 11 } mscTraceSessionX25VcIntdEntry OBJECT-TYPE SYNTAX MscTraceSessionX25VcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceSessionX25VcIntdTable." INDEX { mscTraceIndex, mscTraceSessionIndex, mscTraceSessionX25Index, mscTraceSessionX25VcIndex } ::= { mscTraceSessionX25VcIntdTable 1 } MscTraceSessionX25VcIntdEntry ::= SEQUENCE { mscTraceSessionX25VcCallReferenceNumber Hex, mscTraceSessionX25VcElapsedTimeTillNow Unsigned32, mscTraceSessionX25VcSegmentsRx Unsigned32, mscTraceSessionX25VcSegmentsSent Unsigned32, mscTraceSessionX25VcStartTime EnterpriseDateAndTime, mscTraceSessionX25VcCallReferenceNumberDecimal Unsigned32 } mscTraceSessionX25VcCallReferenceNumber OBJECT-TYPE SYNTAX Hex (0..16777215) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is obsolete. It is replaced by the callReferenceNumber attribute to display the call reference number in decimal. The SNMP reference for the callReferenceNumber attribute is callReferenceNumberDecimal." ::= { mscTraceSessionX25VcIntdEntry 1 } mscTraceSessionX25VcElapsedTimeTillNow OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started." ::= { mscTraceSessionX25VcIntdEntry 2 } mscTraceSessionX25VcSegmentsRx OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state." ::= { mscTraceSessionX25VcIntdEntry 3 } mscTraceSessionX25VcSegmentsSent OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet." ::= { mscTraceSessionX25VcIntdEntry 4 } mscTraceSessionX25VcStartTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes." ::= { mscTraceSessionX25VcIntdEntry 5 } mscTraceSessionX25VcCallReferenceNumberDecimal OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." ::= { mscTraceSessionX25VcIntdEntry 7 } mscTraceSessionX25VcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscTraceSessionX25VcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** ... Statistics(Stats) This group defines general attributes collected by general Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods." ::= { mscTraceSessionX25Vc 12 } mscTraceSessionX25VcStatsEntry OBJECT-TYPE SYNTAX MscTraceSessionX25VcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscTraceSessionX25VcStatsTable." INDEX { mscTraceIndex, mscTraceSessionIndex, mscTraceSessionX25Index, mscTraceSessionX25VcIndex } ::= { mscTraceSessionX25VcStatsTable 1 } MscTraceSessionX25VcStatsEntry ::= SEQUENCE { mscTraceSessionX25VcAckStackingTimeouts Unsigned32, mscTraceSessionX25VcOutOfRangeFrmFromSubnet Unsigned32, mscTraceSessionX25VcDuplicatesFromSubnet Unsigned32, mscTraceSessionX25VcFrmRetryTimeouts Unsigned32, mscTraceSessionX25VcPeakRetryQueueSize Unsigned32, mscTraceSessionX25VcPeakOoSeqQueueSize Unsigned32, mscTraceSessionX25VcPeakOoSeqFrmForwarded Unsigned32, mscTraceSessionX25VcPeakStackedAcksRx Unsigned32, mscTraceSessionX25VcSubnetRecoveries Unsigned32, mscTraceSessionX25VcWindowClosuresToSubnet Unsigned32, mscTraceSessionX25VcWindowClosuresFromSubnet Unsigned32, mscTraceSessionX25VcWrTriggers Unsigned32 } mscTraceSessionX25VcAckStackingTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of ack stacking timer expiries. It is used as an indicator of the acknowledgment behavior across the subnet when ack stacking is in effect. If it expires often, usually this means end users will experience longer delay. The ack stacking timer specifies how long the Vc will wait before finally sending the subnet acknowledgment. if this attribute is set to a value of 0, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to a value other than zero, then the Vc will wait for this amount of time in an attempt to piggyback the acknowledgment packet on another credit or data packet. If the Vc cannot piggyback the acknowledgment packet within this time, then the packet is returned without piggybacking." ::= { mscTraceSessionX25VcStatsEntry 1 } mscTraceSessionX25VcOutOfRangeFrmFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of subnet frames discarded due to the sequence number being out of range. Two Categories apply for the General Vc 1) lost Acks (previous Range) 2) unexpected Packets (next Range) Vc internally maintains its own sequence number of packet order and sequencing. Due to packet retransmission, Vc may receive duplicate packets that have the same Vc internal sequence number. Only 1 copy is accepted by the Vc and other copies of the same packets are detected through this count. This attribute can be used to record the frequency of packet retransmission due to Vc and other part of the subnet." ::= { mscTraceSessionX25VcStatsEntry 2 } mscTraceSessionX25VcDuplicatesFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of subnet packets discarded due to duplication. It is used to detect software error fault or duplication caused by retransmitting." ::= { mscTraceSessionX25VcStatsEntry 3 } mscTraceSessionX25VcFrmRetryTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which have retransmission time-out. If packets from Vc into the subnet are discarded by the subnet, the source Vc will not receive any acknowledgment. The retransmission timer then expires and packets will be retransmitted again. Note that the Vc idle probe may be retransmitted and is included in this count. This statistics does not show the distribution of how many times packets are retransmitted (e.g. first retransmission results in successful packet forwarding)." ::= { mscTraceSessionX25VcStatsEntry 4 } mscTraceSessionX25VcPeakRetryQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest body of unacknowledged packets." ::= { mscTraceSessionX25VcStatsEntry 5 } mscTraceSessionX25VcPeakOoSeqQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the out of sequence queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets." ::= { mscTraceSessionX25VcStatsEntry 6 } mscTraceSessionX25VcPeakOoSeqFrmForwarded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the sequence packet queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets, which by the receipt of an expected packet have been transformed to expected packets. The number of times this peak is reached is not recorded as it is traffic dependent." ::= { mscTraceSessionX25VcStatsEntry 7 } mscTraceSessionX25VcPeakStackedAcksRx OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of wait acks. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest collective acknowledgment." ::= { mscTraceSessionX25VcStatsEntry 8 } mscTraceSessionX25VcSubnetRecoveries OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of successful Vc recovery attempts. This attribute is used as an indicator of how many times the Vc path is broken but can be recovered. This attribute is useful to record the number of network path failures." ::= { mscTraceSessionX25VcStatsEntry 9 } mscTraceSessionX25VcWindowClosuresToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of window closures to subnet. A packet may have been sent into the subnet but its acknowledgment from the remote Vc has not yet been received. This is a 8 bit sequence number.This number is useful in detecting whether the Vc is sending any packet into the subnet." ::= { mscTraceSessionX25VcStatsEntry 10 } mscTraceSessionX25VcWindowClosuresFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of window closures from subnet. This attribute is useful in detecting whether the Vc is receiving any packet from the subnet." ::= { mscTraceSessionX25VcStatsEntry 11 } mscTraceSessionX25VcWrTriggers OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of times the Vc stays within the W-R region. The W-R region is a value used to determined the timing of credit transmission. Should the current window size be beneath this value, the credits will be transmitted immediately. Otherwise, they will be transmitted later with actual data. The wrTriggers statistic is therefore used to analyze the flow control and credit mechanism." ::= { mscTraceSessionX25VcStatsEntry 12 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mscTraceRcvrX25StorageType, -- mscTraceSessionX25VcWindowClosuresToSubnet, -- mscTraceSessionX25VcCalledLcn, -- mscTraceRcvrX25DnaCugComponentName, -- mscTraceRcvrX25DnaCugDnic, -- mscTraceSessionX25VcSubnetRxWindowSize, -- mscTraceSessionX25VcOutOfRangeFrmFromSubnet, -- mscTraceRcvrX25DnaDefaultRecvFrmNetworkThruputClass, -- mscTraceSessionX25VcSegmentsRx, -- mscTraceRcvrX25DnaCugInterlockCode, -- mscTraceRcvrX25DnaDefaultSendToNetworkPacketSize, -- mscTraceRcvrX25DnaComponentName, -- mscTraceSessionX25VcCalledNpi, -- mscTraceSessionX25VcType, -- mscTraceSessionX25VcAccountingEnabled, -- mscTraceSessionX25ComponentName, -- mscTraceSessionX25VcSegmentsSent, -- mscTraceSessionX25VcSubnetTxPktSize, -- mscTraceRcvrX25DnaCugPrivileged, -- mscTraceSessionX25VcTransferPriorityToNetwork, -- mscTraceRcvrX25DnaPacketSizes, -- mscTraceSessionX25VcPreviousState, -- mscTraceRcvrX25DcRowStatus, -- mscTraceSessionX25VcSubnetRecoveries, -- mscTraceRcvrX25DnaOutPathReliabilityOverRide, -- mscTraceSessionX25VcAckStackingTimeouts, -- mscTraceSessionX25VcRowStatus, -- mscTraceSessionX25VcLocalTxPktSize, -- mscTraceRcvrX25DcRemoteDna, -- mscTraceSessionX25VcFastSelectCall, -- mscTraceRcvrX25DnaOutPathReliabilitySignal, -- mscTraceRcvrX25DcRemoteNpi, -- mscTraceRcvrX25RowStatus, -- mscTraceSessionX25VcStartTime, -- mscTraceSessionX25VcSegmentSize, -- mscTraceRcvrX25DnaCugPreferential, -- mscTraceRcvrX25DnaOutAccess, -- mscTraceRcvrX25DnaDefaultSendToNetworkWindowSize, -- mscTraceSessionX25VcElapsedTimeTillNow, -- mscTraceSessionX25VcAccountingEnd, -- mscTraceRcvrX25DcComponentName, -- mscTraceSessionX25VcPriority, -- mscTraceRcvrX25DnaCugIncCalls, -- mscTraceRcvrX25DnaDefaultRecvFrmNetworkPacketSize, -- mscTraceSessionX25VcCallingDna, -- mscTraceSessionX25VcComponentName, -- mscTraceRcvrX25DnaNumberingPlanIndicator, -- mscTraceSessionX25VcPeakOoSeqQueueSize, -- mscTraceSessionX25VcCalledDna, -- mscTraceSessionX25VcCallingLcn, -- mscTraceSessionX25VcCallingNpi, -- mscTraceSessionX25VcPeakRetryQueueSize, -- mscTraceSessionX25VcPeakOoSeqFrmForwarded, -- mscTraceSessionX25VcSubnetTxWindowSize, -- mscTraceSessionX25VcFrmRetryTimeouts, -- mscTraceSessionX25VcLocalRxPktSize, -- mscTraceRcvrX25DnaCugStorageType, -- mscTraceSessionX25VcSubnetRxPktSize, -- mscTraceRcvrX25DnaDataNetworkAddress, -- mscTraceRcvrX25DnaCugOutCalls, -- mscTraceSessionX25VcPathReliability, -- mscTraceSessionX25VcStorageType, -- mscTraceSessionX25VcWrTriggers, -- mscTraceRcvrX25DnaCugFormat, -- mscTraceRcvrX25DcUserData, -- mscTraceSessionX25VcTransferPriorityFromNetwork, -- mscTraceRcvrX25DnaStorageType, -- mscTraceRcvrX25DnaCugType, -- mscTraceSessionX25StorageType, -- mscTraceRcvrX25DnaOutIntl, -- mscTraceRcvrX25DnaOutDefaultPriority, -- mscTraceRcvrX25DnaOutDefaultPathReliability, -- mscTraceRcvrX25DnaIncCalls, -- mscTraceRcvrX25DnaDefaultSendToNetworkThruputClass, -- mscTraceRcvrX25ComponentName, -- mscTraceRcvrX25DnaOutCalls, -- mscTraceRcvrX25DcType, -- mscTraceSessionX25VcMaxSubnetPktSize, -- mscTraceRcvrX25DnaCugRowStatus, -- mscTraceSessionX25VcDuplicatesFromSubnet, -- mscTraceSessionX25VcLocalTxWindowSize, -- mscTraceSessionX25VcState, -- mscTraceRcvrX25DnaPacketSizeNegotiation, -- mscTraceSessionX25VcPeakStackedAcksRx, -- mscTraceSessionX25VcCallReferenceNumberDecimal, -- mscTraceRcvrX25DnaDefaultRecvFrmNetworkWindowSize, -- mscTraceSessionX25VcDiagnosticCode, -- mscTraceSessionX25VcPreviousDiagnosticCode, -- mscTraceRcvrX25DnaRowStatus, -- mscTraceSessionX25VcWindowClosuresFromSubnet, -- mscTraceRcvrX25DcStorageType, -- mscTraceSessionX25RowStatus, -- mscTraceSessionX25VcLocalRxWindowSize } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." x25TraceRcvrGroup OBJECT IDENTIFIER ::= { x25TraceRcvrMIB 1 } x25TraceRcvrGroupCA OBJECT IDENTIFIER ::= { x25TraceRcvrGroup 1 } x25TraceRcvrGroupCA02 OBJECT IDENTIFIER ::= { x25TraceRcvrGroupCA 3 } x25TraceRcvrGroupCA02A OBJECT IDENTIFIER ::= { x25TraceRcvrGroupCA02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "MscPassport Release 1.2 X25TraceRcvr." -- STATUS mandatory -- DESCRIPTION "Carrier Passport X25TraceRcvr MIB: MIB Version CA02A, -- Software Version CA02S9C." -- SUPPORTS Nortel-MsCarrier-MscPassport-X25TraceRcvrMIB -- INCLUDES { x25TraceRcvrGroupCA02A } x25TraceRcvrCapabilities OBJECT IDENTIFIER ::= { x25TraceRcvrMIB 3 } x25TraceRcvrCapabilitiesCA OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilities 1 } x25TraceRcvrCapabilitiesCA02 OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilitiesCA 3 } x25TraceRcvrCapabilitiesCA02A OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilitiesCA02 2 } END