Nortel-MsCarrier-MscPassport-ServerAccessRsaMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 mscPassportMIBs, mscComponents FROM Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Counter32, RowPointer, DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB AsciiString, Hex, NonReplicated, EnterpriseDateAndTime, Link, AsciiStringIndex, DigitString FROM Nortel-MsCarrier-MscPassport-TextualConventionsMIB; -- LAST-UPDATED "9909010000Z" -- ORGANIZATION "Nortel Networks" -- CONTACT-INFO " -- Nortel Carrier Data Network Management -- -- Postal: P.O. Box 3511, Station C -- Ottawa, Ontario -- Canada K1Y 4H7 -- -- via the WEB: http://www.nortelnetworks.com -- select 'Contact Us' from the menu -- -- via phone: 1-800-4NORTEL" -- DESCRIPTION -- "The module describing the Nortel MsCarrier MscPassport -- ServerAccessRsa Enterprise MIB." serverAccessRsaMIB OBJECT IDENTIFIER ::= { mscPassportMIBs 116 } -- RemoteServerAgent/ -- The Rsa component provides non-Passport based applications -- access to Passport servers via a Frame Relay SVC connection. The -- Rsa component can be provisioned on any Passport module in the -- network. Multiple Rsa components can be provisioned for load -- sharing and/or backup purposes. The component instance value is a -- unique string within the module. mscRsa OBJECT IDENTIFIER ::= { mscComponents 108 } mscRsaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscRsa components." ::= { mscRsa 1 } mscRsaRowStatusEntry OBJECT-TYPE SYNTAX MscRsaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscRsa component." INDEX { mscRsaIndex } ::= { mscRsaRowStatusTable 1 } MscRsaRowStatusEntry ::= SEQUENCE { mscRsaRowStatus RowStatus, mscRsaComponentName DisplayString, mscRsaStorageType StorageType, mscRsaIndex AsciiStringIndex } mscRsaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscRsa components. These components can be added and deleted." ::= { mscRsaRowStatusEntry 1 } mscRsaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscRsaRowStatusEntry 2 } mscRsaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscRsa tables." ::= { mscRsaRowStatusEntry 4 } mscRsaIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscRsa tables." ::= { mscRsaRowStatusEntry 10 } mscRsaOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Options group defines provisionable attributes associated with the Rsa component." ::= { mscRsa 10 } mscRsaOptionsEntry OBJECT-TYPE SYNTAX MscRsaOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaOptionsTable." INDEX { mscRsaIndex } ::= { mscRsaOptionsTable 1 } MscRsaOptionsEntry ::= SEQUENCE { mscRsaLogicalProcessor Link } mscRsaLogicalProcessor OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the logical processor on which the RSA process will execute." ::= { mscRsaOptionsEntry 2 } mscRsaStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscRsa 11 } mscRsaStateEntry OBJECT-TYPE SYNTAX MscRsaStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaStateTable." INDEX { mscRsaIndex } ::= { mscRsaStateTable 1 } MscRsaStateEntry ::= SEQUENCE { mscRsaAdminState INTEGER, mscRsaOperationalState INTEGER, mscRsaUsageState INTEGER } mscRsaAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscRsaStateEntry 1 } mscRsaOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscRsaStateEntry 2 } mscRsaUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscRsaStateEntry 3 } mscRsaOperationalTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Operational group defines operational attributes associated with the Rsa component." ::= { mscRsa 12 } mscRsaOperationalEntry OBJECT-TYPE SYNTAX MscRsaOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaOperationalTable." INDEX { mscRsaIndex } ::= { mscRsaOperationalTable 1 } MscRsaOperationalEntry ::= SEQUENCE { mscRsaMaxRsiConnections INTEGER, mscRsaRsiConnections INTEGER } mscRsaMaxRsiConnections OBJECT-TYPE SYNTAX INTEGER (1000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of RSI connections which can be supported by this Rsa." ::= { mscRsaOperationalEntry 2 } mscRsaRsiConnections OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the number of active RSI connections currently supported by the Rsa component." ::= { mscRsaOperationalEntry 3 } -- Rsa/n DataNetworkAddress -- This is the description of the Remote Server Agent Dna component. -- It includes the attributes which apply to a Vc between the RSI and -- RSA. mscRsaDna OBJECT IDENTIFIER ::= { mscRsa 2 } mscRsaDnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscRsaDna components." ::= { mscRsaDna 1 } mscRsaDnaRowStatusEntry OBJECT-TYPE SYNTAX MscRsaDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscRsaDna component." INDEX { mscRsaIndex, mscRsaDnaIndex } ::= { mscRsaDnaRowStatusTable 1 } MscRsaDnaRowStatusEntry ::= SEQUENCE { mscRsaDnaRowStatus RowStatus, mscRsaDnaComponentName DisplayString, mscRsaDnaStorageType StorageType, mscRsaDnaIndex NonReplicated } mscRsaDnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscRsaDna components. These components cannot be added nor deleted." ::= { mscRsaDnaRowStatusEntry 1 } mscRsaDnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscRsaDnaRowStatusEntry 2 } mscRsaDnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscRsaDna tables." ::= { mscRsaDnaRowStatusEntry 4 } mscRsaDnaIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscRsaDna tables." ::= { mscRsaDnaRowStatusEntry 10 } mscRsaDnaAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. The string of address digits is complemented by the type of address or Npi. These attributes are used to interpret the format of the address digits." ::= { mscRsaDna 10 } mscRsaDnaAddressEntry OBJECT-TYPE SYNTAX MscRsaDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaDnaAddressTable." INDEX { mscRsaIndex, mscRsaDnaIndex } ::= { mscRsaDnaAddressTable 1 } MscRsaDnaAddressEntry ::= SEQUENCE { mscRsaDnaNumberingPlanIndicator INTEGER, mscRsaDnaDataNetworkAddress DigitString } mscRsaDnaNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. An address may belong to the X.121 or E.164 numbering plans. X.121 is used in packet switched data networks." DEFVAL { x121 } ::= { mscRsaDnaAddressEntry 1 } mscRsaDnaDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The Dna attribute contains digits which form a unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where each phone number identifies a unique telephone set. Dna digits are selected and assigned by network operators." ::= { mscRsaDnaAddressEntry 2 } mscRsaDnaOutgoingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OutgoingOptions group defines call options of a Dna for calls which are made out of the interface represented by the Dna. These options are not used for calls arriving to the interface represented by the Dna." ::= { mscRsaDna 11 } mscRsaDnaOutgoingOptionsEntry OBJECT-TYPE SYNTAX MscRsaDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaDnaOutgoingOptionsTable." INDEX { mscRsaIndex, mscRsaDnaIndex } ::= { mscRsaDnaOutgoingOptionsTable 1 } MscRsaDnaOutgoingOptionsEntry ::= SEQUENCE { mscRsaDnaOutCalls INTEGER } mscRsaDnaOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE to the network) can be made using this particular Dna. If set to a value of disallowed, then outgoing calls cannot be made using this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Outgoing Calls Barred' feature for Dnas in that outgoing calls are barred if this attribute is set to a value of disallowed. Either outCalls, or incCalls (or both) must be set to a value of allowed for this Dna to be usable." DEFVAL { disallowed } ::= { mscRsaDnaOutgoingOptionsEntry 1 } mscRsaDnaIncomingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaDnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IncomingOptions defines the set of options for incoming calls. These options are used for calls arriving to the interface represented by the Dna. For calls originated from the interface, IncomingOptions attributes are not used." ::= { mscRsaDna 12 } mscRsaDnaIncomingOptionsEntry OBJECT-TYPE SYNTAX MscRsaDnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaDnaIncomingOptionsTable." INDEX { mscRsaIndex, mscRsaDnaIndex } ::= { mscRsaDnaIncomingOptionsTable 1 } MscRsaDnaIncomingOptionsEntry ::= SEQUENCE { mscRsaDnaIncCalls INTEGER, mscRsaDnaIncAccess INTEGER } mscRsaDnaIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) can be made to this Dna. If set to a value of disallowed, then incoming calls cannot be made to this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Incoming Calls Barred' feature for Dna's in that incoming calls are barred if this attribute is set to a value of disallowed. Either outCalls, or incCalls (or both) must be set to a value of allowed for this Dna to be usable." DEFVAL { allowed } ::= { mscRsaDnaIncomingOptionsEntry 1 } mscRsaDnaIncAccess OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permitted. It also permits incoming calls from DTEs that have Outgoing Access capabilities. If set to a value of disallowed, then such calls cannot be made to this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Closed User Group with Incoming Access' feature for Dnas in that incoming access is granted if this attribute is set to a value of allowed." DEFVAL { disallowed } ::= { mscRsaDnaIncomingOptionsEntry 9 } -- Rsa/n Dna ClosedUserGroup -- ClosedUserGroup defines options associated with a national or -- international Cug Identifier. Other Dnas in the network can have -- Cugs defined which group these Dnas by Cug interlockCode. If -- Dnas are defined with Cugs, calls from Dnas which do not have the -- same interlockCode defined are refused. Attributes incAccess and -- outAccess can override this rule. mscRsaDnaCug OBJECT IDENTIFIER ::= { mscRsaDna 2 } mscRsaDnaCugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaDnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscRsaDnaCug components." ::= { mscRsaDnaCug 1 } mscRsaDnaCugRowStatusEntry OBJECT-TYPE SYNTAX MscRsaDnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscRsaDnaCug component." INDEX { mscRsaIndex, mscRsaDnaIndex, mscRsaDnaCugIndex } ::= { mscRsaDnaCugRowStatusTable 1 } MscRsaDnaCugRowStatusEntry ::= SEQUENCE { mscRsaDnaCugRowStatus RowStatus, mscRsaDnaCugComponentName DisplayString, mscRsaDnaCugStorageType StorageType, mscRsaDnaCugIndex Integer32 } mscRsaDnaCugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscRsaDnaCug components. These components can be added and deleted." ::= { mscRsaDnaCugRowStatusEntry 1 } mscRsaDnaCugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscRsaDnaCugRowStatusEntry 2 } mscRsaDnaCugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscRsaDnaCug tables." ::= { mscRsaDnaCugRowStatusEntry 4 } mscRsaDnaCugIndex OBJECT-TYPE SYNTAX Integer32 (0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscRsaDnaCug tables." ::= { mscRsaDnaCugRowStatusEntry 10 } mscRsaDnaCugCugOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaDnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Attributes in this group define ClosedUserGroup options associated with this particular interlockCode. Dna's with the same Cug (interlockCode) can make calls within this group. Various combinations which permit or prevent calls in the same Cug group are defined here." ::= { mscRsaDnaCug 10 } mscRsaDnaCugCugOptionsEntry OBJECT-TYPE SYNTAX MscRsaDnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaDnaCugCugOptionsTable." INDEX { mscRsaIndex, mscRsaDnaIndex, mscRsaDnaCugIndex } ::= { mscRsaDnaCugCugOptionsTable 1 } MscRsaDnaCugCugOptionsEntry ::= SEQUENCE { mscRsaDnaCugType INTEGER, mscRsaDnaCugDnic DigitString, mscRsaDnaCugInterlockCode Unsigned32, mscRsaDnaCugPreferential INTEGER, mscRsaDnaCugOutCalls INTEGER, mscRsaDnaCugIncCalls INTEGER, mscRsaDnaCugPrivileged INTEGER } mscRsaDnaCugType OBJECT-TYPE SYNTAX INTEGER { national(0), international(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Cug type - the Cug is either a national Cug, or an international Cug. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTEs for which there is no X.75 Gateway between. (National Cugs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the Cug is a national Cug, in which case, the dnic should be left at its default value since it is not part of a national Cug. If this attribute is set to international, then the Cug is an international Cug, in which case, the dnic should be set appropriately as part of the Cug interlockCode." DEFVAL { national } ::= { mscRsaDnaCugCugOptionsEntry 1 } mscRsaDnaCugDnic OBJECT-TYPE SYNTAX DigitString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the dnic (Data Network ID Code) of the Cug by which packet networks are identified. This attribute is not applicable if the Cug is a national Cug, as specified by the Cug type attribute. There are usually 1 or 2 dnics assigned per country, for public networks. The U.S. is an exception where each BOC has a dnic. Also, a group of private networks can have its own dnic. dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T." DEFVAL { '30303030'H } -- "0000" ::= { mscRsaDnaCugCugOptionsEntry 2 } mscRsaDnaCugInterlockCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Cug identifier of a national or international Cug call. It is an arbitrary number and it also can be called Cug in some descriptions. Interfaces (Dna's) defined with this number can make calls to Dna's with the same interlockCode." DEFVAL { 0 } ::= { mscRsaDnaCugCugOptionsEntry 3 } mscRsaDnaCugPreferential OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to yes indicates that this Cug is the preferential Cug, in which case it will be used during the call establishment phase if the DTE has not explicitly specified a Cug index in the call request packet. If set to no, then this Cug is not the preferential Cug. Only one of the Cugs associated with a particular Dna can be the preferential Cug - only one Cug can have this attribute set to yes." DEFVAL { no } ::= { mscRsaDnaCugCugOptionsEntry 4 } mscRsaDnaCugOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) can be made using this particular Cug. If set to a value of disallowed, then outgoing calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Outgoing Calls Barred' feature for Cugs in that outgoing calls are barred if this attribute is set to a value of disallowed." DEFVAL { disallowed } ::= { mscRsaDnaCugCugOptionsEntry 5 } mscRsaDnaCugIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) can be made using this particular Cug. If set to disallowed, then incoming calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Incoming Calls Barred' feature for Cugs in that incoming calls are barred if this attribute is set to a value of disallowed." DEFVAL { allowed } ::= { mscRsaDnaCugCugOptionsEntry 6 } mscRsaDnaCugPrivileged OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to yes indicates that this Cug is a privileged Cug. In DPN, at least one side of a call setup within a Cug must have the Cug as a privileged Cug. If set to no, then the Cug is not privileged. If both the local DTE and the remote DTE subscribe to the Cug, but it is not privileged, then the call will be cleared. This attribute is typically used for a host DTE which must accept calls from many other DTEs in which case the other DTEs cannot call one another, but can call the host. In this example, the host would have the privileged Cug, and the other DTEs would belong to the same Cug, but it would not be privileged." DEFVAL { yes } ::= { mscRsaDnaCugCugOptionsEntry 7 } -- Rsa/ VncsAccess -- The VncsAccess component provides access to the Passport Voice -- Networking Call Server. mscRsaVncsAccess OBJECT IDENTIFIER ::= { mscRsa 3 } mscRsaVncsAccessRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaVncsAccessRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscRsaVncsAccess components." ::= { mscRsaVncsAccess 1 } mscRsaVncsAccessRowStatusEntry OBJECT-TYPE SYNTAX MscRsaVncsAccessRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscRsaVncsAccess component." INDEX { mscRsaIndex, mscRsaVncsAccessIndex } ::= { mscRsaVncsAccessRowStatusTable 1 } MscRsaVncsAccessRowStatusEntry ::= SEQUENCE { mscRsaVncsAccessRowStatus RowStatus, mscRsaVncsAccessComponentName DisplayString, mscRsaVncsAccessStorageType StorageType, mscRsaVncsAccessIndex NonReplicated } mscRsaVncsAccessRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscRsaVncsAccess components. These components can be added and deleted." ::= { mscRsaVncsAccessRowStatusEntry 1 } mscRsaVncsAccessComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscRsaVncsAccessRowStatusEntry 2 } mscRsaVncsAccessStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscRsaVncsAccess tables." ::= { mscRsaVncsAccessRowStatusEntry 4 } mscRsaVncsAccessIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscRsaVncsAccess tables." ::= { mscRsaVncsAccessRowStatusEntry 10 } mscRsaVncsAccessProvisionedTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaVncsAccessProvisionedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisioned group defines provisioned attributes associated with the VncsAccess component." ::= { mscRsaVncsAccess 10 } mscRsaVncsAccessProvisionedEntry OBJECT-TYPE SYNTAX MscRsaVncsAccessProvisionedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaVncsAccessProvisionedTable." INDEX { mscRsaIndex, mscRsaVncsAccessIndex } ::= { mscRsaVncsAccessProvisionedTable 1 } MscRsaVncsAccessProvisionedEntry ::= SEQUENCE { mscRsaVncsAccessTimeToLive INTEGER } mscRsaVncsAccessTimeToLive OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the length of time VNCS requests are allowed to remain queued for transmission before they are considered too old and are discarded. This attribute should be set in considereation with the voice application timeout interval." DEFVAL { 2 } ::= { mscRsaVncsAccessProvisionedEntry 1 } mscRsaVncsAccessStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaVncsAccessStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscRsaVncsAccess 11 } mscRsaVncsAccessStateEntry OBJECT-TYPE SYNTAX MscRsaVncsAccessStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaVncsAccessStateTable." INDEX { mscRsaIndex, mscRsaVncsAccessIndex } ::= { mscRsaVncsAccessStateTable 1 } MscRsaVncsAccessStateEntry ::= SEQUENCE { mscRsaVncsAccessAdminState INTEGER, mscRsaVncsAccessOperationalState INTEGER, mscRsaVncsAccessUsageState INTEGER } mscRsaVncsAccessAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscRsaVncsAccessStateEntry 1 } mscRsaVncsAccessOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscRsaVncsAccessStateEntry 2 } mscRsaVncsAccessUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscRsaVncsAccessStateEntry 3 } mscRsaVncsAccessOperationalTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaVncsAccessOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Operational group defines operational attributes associated with the VncsAccess component." ::= { mscRsaVncsAccess 12 } mscRsaVncsAccessOperationalEntry OBJECT-TYPE SYNTAX MscRsaVncsAccessOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaVncsAccessOperationalTable." INDEX { mscRsaIndex, mscRsaVncsAccessIndex } ::= { mscRsaVncsAccessOperationalTable 1 } MscRsaVncsAccessOperationalEntry ::= SEQUENCE { mscRsaVncsAccessRequestsSent Counter32, mscRsaVncsAccessRepliesReceived Counter32, mscRsaVncsAccessRequestsQueued INTEGER, mscRsaVncsAccessRequestsDiscarded Counter32 } mscRsaVncsAccessRequestsSent OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of translation requests sent to VNCS. This counter wraps to zero when it reaches its maximum value." ::= { mscRsaVncsAccessOperationalEntry 1 } mscRsaVncsAccessRepliesReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of translation replies received from VNCS. This counter wraps to zero when it reaches its maximum value." ::= { mscRsaVncsAccessOperationalEntry 2 } mscRsaVncsAccessRequestsQueued OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of translation requests queued for transmission to VNCS." DEFVAL { 0 } ::= { mscRsaVncsAccessOperationalEntry 3 } mscRsaVncsAccessRequestsDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of translation requests discarded before being sent to VNCS. Requests are discarded if the queue becomes too large or the VNCS server is unavailable. This counter wraps to zero when it reaches its maximum value." ::= { mscRsaVncsAccessOperationalEntry 4 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Rsa/ Connection/n -- Rsi Connection/n -- The Connection component contains information relating to the -- connection between the RSA and RSI. This component is named by -- the logical channel number of the connection. mscRsaConnection OBJECT IDENTIFIER ::= { mscRsa 4 } mscRsaConnectionRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscRsaConnection components." ::= { mscRsaConnection 1 } mscRsaConnectionRowStatusEntry OBJECT-TYPE SYNTAX MscRsaConnectionRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscRsaConnection component." INDEX { mscRsaIndex, mscRsaConnectionIndex } ::= { mscRsaConnectionRowStatusTable 1 } MscRsaConnectionRowStatusEntry ::= SEQUENCE { mscRsaConnectionRowStatus RowStatus, mscRsaConnectionComponentName DisplayString, mscRsaConnectionStorageType StorageType, mscRsaConnectionIndex Integer32 } mscRsaConnectionRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscRsaConnection components. These components cannot be added nor deleted." ::= { mscRsaConnectionRowStatusEntry 1 } mscRsaConnectionComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscRsaConnectionRowStatusEntry 2 } mscRsaConnectionStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscRsaConnection tables." ::= { mscRsaConnectionRowStatusEntry 4 } mscRsaConnectionIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscRsaConnection tables." ::= { mscRsaConnectionRowStatusEntry 10 } mscRsaConnectionOperationalTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Operational group defines operational attributes associated with the Connection component." ::= { mscRsaConnection 10 } mscRsaConnectionOperationalEntry OBJECT-TYPE SYNTAX MscRsaConnectionOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaConnectionOperationalTable." INDEX { mscRsaIndex, mscRsaConnectionIndex } ::= { mscRsaConnectionOperationalTable 1 } MscRsaConnectionOperationalEntry ::= SEQUENCE { mscRsaConnectionRemoteName AsciiString, mscRsaConnectionCallState INTEGER } mscRsaConnectionRemoteName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies an ASCII string identifier for the remote module which is retrieved from the call request as user data." ::= { mscRsaConnectionOperationalEntry 1 } mscRsaConnectionCallState OBJECT-TYPE SYNTAX INTEGER { initializing(0), creatingVc(1), calling(2), acceptingCall(3), registeringFmo(4), establishingLapf(5), dataTransfer(6), clearingCall(7), terminating(8), terminatingVc(9), terminated(10) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the state of the connection. The normal state for the connection is dataTransfer. The other states are transient states used to setup or clear the connection." ::= { mscRsaConnectionOperationalEntry 2 } mscRsaConnectionServerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionServerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The ServerStatistics group provides individual server usage statistics for the connection." ::= { mscRsaConnection 11 } mscRsaConnectionServerStatsEntry OBJECT-TYPE SYNTAX MscRsaConnectionServerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaConnectionServerStatsTable." INDEX { mscRsaIndex, mscRsaConnectionIndex } ::= { mscRsaConnectionServerStatsTable 1 } MscRsaConnectionServerStatsEntry ::= SEQUENCE { mscRsaConnectionVncsRequests Counter32, mscRsaConnectionVncsReplies Counter32 } mscRsaConnectionVncsRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of VNCS translation requests sent or received on this connection." ::= { mscRsaConnectionServerStatsEntry 1 } mscRsaConnectionVncsReplies OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of VNCS translation replies sent or received on this connection." ::= { mscRsaConnectionServerStatsEntry 2 } mscRsaConnectionLapfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionLapfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the LAPF status." ::= { mscRsaConnection 12 } mscRsaConnectionLapfStatusEntry OBJECT-TYPE SYNTAX MscRsaConnectionLapfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaConnectionLapfStatusTable." INDEX { mscRsaIndex, mscRsaConnectionIndex } ::= { mscRsaConnectionLapfStatusTable 1 } MscRsaConnectionLapfStatusEntry ::= SEQUENCE { mscRsaConnectionLapfState INTEGER, mscRsaConnectionLapfQueueSize Counter32 } mscRsaConnectionLapfState OBJECT-TYPE SYNTAX INTEGER { disconnected(1), linkSetup(2), disconnectRequest(4), informationTransfer(5), waitingAck(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the current state of the LAPF interface. The normal states are informationTransfer and waitingAck. Since the LAPF interface is not over a physical link the other states are transitional." ::= { mscRsaConnectionLapfStatusEntry 1 } mscRsaConnectionLapfQueueSize OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of frames in the LAPF transmit queue." ::= { mscRsaConnectionLapfStatusEntry 4 } mscRsaConnectionLapfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionLapfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the LAPF statistics." ::= { mscRsaConnection 13 } mscRsaConnectionLapfStatsEntry OBJECT-TYPE SYNTAX MscRsaConnectionLapfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaConnectionLapfStatsTable." INDEX { mscRsaIndex, mscRsaConnectionIndex } ::= { mscRsaConnectionLapfStatsTable 1 } MscRsaConnectionLapfStatsEntry ::= SEQUENCE { mscRsaConnectionLapfStateChanges Counter32, mscRsaConnectionLapfRemoteBusy Counter32, mscRsaConnectionLapfAckTimeouts Counter32, mscRsaConnectionLapfRejectFramesRx Counter32, mscRsaConnectionLapfIFramesTx Counter32, mscRsaConnectionLapfIFramesTxDiscarded Counter32, mscRsaConnectionLapfIFramesRx Counter32, mscRsaConnectionLapfIFramesRxDiscarded Counter32 } mscRsaConnectionLapfStateChanges OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the LAPF interface has changed state. While the LAPF interface is in informationTransfer state, this counter will increment on each expiry of idleProbeTimer as its state goes from informationTransfer to waitingAck and back. When this count reaches maximum, it wraps to zero." ::= { mscRsaConnectionLapfStatsEntry 1 } mscRsaConnectionLapfRemoteBusy OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). When this count reaches maximum, it wraps to zero." ::= { mscRsaConnectionLapfStatsEntry 2 } mscRsaConnectionLapfAckTimeouts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate improper values have been chosen for ackTimer and ackDelayTimer between the local and remote ends. When this count reaches maximum, it wraps to zero." ::= { mscRsaConnectionLapfStatsEntry 3 } mscRsaConnectionLapfRejectFramesRx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of REJ frames received. When this count reaches maximum, it wraps to zero." ::= { mscRsaConnectionLapfStatsEntry 4 } mscRsaConnectionLapfIFramesTx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of I-frames transmitted. An I- frame may be counted more than once if there are retransmissions. When this count reaches maximum, it wraps to zero." ::= { mscRsaConnectionLapfStatsEntry 5 } mscRsaConnectionLapfIFramesTxDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of transmit I-frames that have been discarded. Discard reasons may be one of the following: 1. The frame length is beyond allowed limit. 2. The LAPF interface is in disconnected state. 3. The transmit queue has been purged because the queue length has reached the reset threshold. When this count reaches maximum, it wraps to zero." ::= { mscRsaConnectionLapfStatsEntry 6 } mscRsaConnectionLapfIFramesRx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of I-frames received. When this count reaches maximum, it wraps to zero." ::= { mscRsaConnectionLapfStatsEntry 7 } mscRsaConnectionLapfIFramesRxDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of received I-frames that have been discarded. The discard reasons are: 1. Incorrect frame size. 2. Frame is out of sequence. 3. Frame received while not in informationTransfer or waitingAck state. When this count reaches maximum, it wraps to zero." ::= { mscRsaConnectionLapfStatsEntry 8 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- This component defines attributes collected by Frame Relay Vc. mscRsaConnectionVc OBJECT IDENTIFIER ::= { mscRsaConnection 2 } mscRsaConnectionVcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscRsaConnectionVc components." ::= { mscRsaConnectionVc 1 } mscRsaConnectionVcRowStatusEntry OBJECT-TYPE SYNTAX MscRsaConnectionVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscRsaConnectionVc component." INDEX { mscRsaIndex, mscRsaConnectionIndex, mscRsaConnectionVcIndex } ::= { mscRsaConnectionVcRowStatusTable 1 } MscRsaConnectionVcRowStatusEntry ::= SEQUENCE { mscRsaConnectionVcRowStatus RowStatus, mscRsaConnectionVcComponentName DisplayString, mscRsaConnectionVcStorageType StorageType, mscRsaConnectionVcIndex NonReplicated } mscRsaConnectionVcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscRsaConnectionVc components. These components cannot be added nor deleted." ::= { mscRsaConnectionVcRowStatusEntry 1 } mscRsaConnectionVcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscRsaConnectionVcRowStatusEntry 2 } mscRsaConnectionVcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscRsaConnectionVc tables." ::= { mscRsaConnectionVcRowStatusEntry 4 } mscRsaConnectionVcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscRsaConnectionVc tables." ::= { mscRsaConnectionVcRowStatusEntry 10 } mscRsaConnectionVcCadTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application." ::= { mscRsaConnectionVc 10 } mscRsaConnectionVcCadEntry OBJECT-TYPE SYNTAX MscRsaConnectionVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaConnectionVcCadTable." INDEX { mscRsaIndex, mscRsaConnectionIndex, mscRsaConnectionVcIndex } ::= { mscRsaConnectionVcCadTable 1 } MscRsaConnectionVcCadEntry ::= SEQUENCE { mscRsaConnectionVcType INTEGER, mscRsaConnectionVcState INTEGER, mscRsaConnectionVcPreviousState INTEGER, mscRsaConnectionVcDiagnosticCode Unsigned32, mscRsaConnectionVcPreviousDiagnosticCode Unsigned32, mscRsaConnectionVcCalledNpi INTEGER, mscRsaConnectionVcCalledDna DigitString, mscRsaConnectionVcCalledLcn Unsigned32, mscRsaConnectionVcCallingNpi INTEGER, mscRsaConnectionVcCallingDna DigitString, mscRsaConnectionVcCallingLcn Unsigned32, mscRsaConnectionVcAccountingEnabled INTEGER, mscRsaConnectionVcFastSelectCall INTEGER, mscRsaConnectionVcPathReliability INTEGER, mscRsaConnectionVcAccountingEnd INTEGER, mscRsaConnectionVcPriority INTEGER, mscRsaConnectionVcSegmentSize Unsigned32, mscRsaConnectionVcMaxSubnetPktSize Unsigned32, mscRsaConnectionVcRcosToNetwork INTEGER, mscRsaConnectionVcRcosFromNetwork INTEGER, mscRsaConnectionVcEmissionPriorityToNetwork INTEGER, mscRsaConnectionVcEmissionPriorityFromNetwork INTEGER, mscRsaConnectionVcDataPath AsciiString } mscRsaConnectionVcType OBJECT-TYPE SYNTAX INTEGER { svc(0), pvc(1), spvc(2), frf10spvc(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the type of call, pvc,svc,spvc or frf10spvc." ::= { mscRsaConnectionVcCadEntry 1 } mscRsaConnectionVcState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4." ::= { mscRsaConnectionVcCadEntry 2 } mscRsaConnectionVcPreviousState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing." ::= { mscRsaConnectionVcCadEntry 3 } mscRsaConnectionVcDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { mscRsaConnectionVcCadEntry 4 } mscRsaConnectionVcPreviousDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { mscRsaConnectionVcCadEntry 5 } mscRsaConnectionVcCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the called end." ::= { mscRsaConnectionVcCadEntry 6 } mscRsaConnectionVcCalledDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection." ::= { mscRsaConnectionVcCadEntry 7 } mscRsaConnectionVcCalledLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information." ::= { mscRsaConnectionVcCadEntry 8 } mscRsaConnectionVcCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the calling end." ::= { mscRsaConnectionVcCadEntry 9 } mscRsaConnectionVcCallingDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the calling end." ::= { mscRsaConnectionVcCadEntry 10 } mscRsaConnectionVcCallingLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the calling end." ::= { mscRsaConnectionVcCadEntry 11 } mscRsaConnectionVcAccountingEnabled OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options." ::= { mscRsaConnectionVcCadEntry 12 } mscRsaConnectionVcFastSelectCall OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays that this is a fast select call." ::= { mscRsaConnectionVcCadEntry 13 } mscRsaConnectionVcPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the path reliability." ::= { mscRsaConnectionVcCadEntry 19 } mscRsaConnectionVcAccountingEnd OBJECT-TYPE SYNTAX INTEGER { callingEnd(0), calledEnd(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record." ::= { mscRsaConnectionVcCadEntry 20 } mscRsaConnectionVcPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the call is a normal or a high priority call." ::= { mscRsaConnectionVcCadEntry 21 } mscRsaConnectionVcSegmentSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received." ::= { mscRsaConnectionVcCadEntry 22 } mscRsaConnectionVcMaxSubnetPktSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum packet size allowed on the Vc." ::= { mscRsaConnectionVcCadEntry 27 } mscRsaConnectionVcRcosToNetwork OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1), multimedia(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the routing metric routing class of service to the network." ::= { mscRsaConnectionVcCadEntry 28 } mscRsaConnectionVcRcosFromNetwork OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1), multimedia(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the routing metric Routing Class of Service from the Network." ::= { mscRsaConnectionVcCadEntry 29 } mscRsaConnectionVcEmissionPriorityToNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1), interrupting(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the network internal emission priotity to the network." ::= { mscRsaConnectionVcCadEntry 30 } mscRsaConnectionVcEmissionPriorityFromNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1), interrupting(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the network internal emission priotity from the network." ::= { mscRsaConnectionVcCadEntry 31 } mscRsaConnectionVcDataPath OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed." ::= { mscRsaConnectionVcCadEntry 32 } mscRsaConnectionVcIntdTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued." ::= { mscRsaConnectionVc 11 } mscRsaConnectionVcIntdEntry OBJECT-TYPE SYNTAX MscRsaConnectionVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaConnectionVcIntdTable." INDEX { mscRsaIndex, mscRsaConnectionIndex, mscRsaConnectionVcIndex } ::= { mscRsaConnectionVcIntdTable 1 } MscRsaConnectionVcIntdEntry ::= SEQUENCE { mscRsaConnectionVcCallReferenceNumber Hex, mscRsaConnectionVcElapsedTimeTillNow Unsigned32, mscRsaConnectionVcSegmentsRx Unsigned32, mscRsaConnectionVcSegmentsSent Unsigned32, mscRsaConnectionVcStartTime EnterpriseDateAndTime, mscRsaConnectionVcCallReferenceNumberDecimal Unsigned32 } mscRsaConnectionVcCallReferenceNumber OBJECT-TYPE SYNTAX Hex (0..16777215) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is obsolete. It is replaced by the callReferenceNumber attribute to display the call reference number in decimal. The SNMP reference for the callReferenceNumber attribute is callReferenceNumberDecimal." ::= { mscRsaConnectionVcIntdEntry 1 } mscRsaConnectionVcElapsedTimeTillNow OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started." ::= { mscRsaConnectionVcIntdEntry 2 } mscRsaConnectionVcSegmentsRx OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state." ::= { mscRsaConnectionVcIntdEntry 3 } mscRsaConnectionVcSegmentsSent OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet." ::= { mscRsaConnectionVcIntdEntry 4 } mscRsaConnectionVcStartTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes." ::= { mscRsaConnectionVcIntdEntry 5 } mscRsaConnectionVcCallReferenceNumberDecimal OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." ::= { mscRsaConnectionVcIntdEntry 7 } mscRsaConnectionVcFrdTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionVcFrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers" ::= { mscRsaConnectionVc 12 } mscRsaConnectionVcFrdEntry OBJECT-TYPE SYNTAX MscRsaConnectionVcFrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaConnectionVcFrdTable." INDEX { mscRsaIndex, mscRsaConnectionIndex, mscRsaConnectionVcIndex } ::= { mscRsaConnectionVcFrdTable 1 } MscRsaConnectionVcFrdEntry ::= SEQUENCE { mscRsaConnectionVcFrmCongestedToSubnet Unsigned32, mscRsaConnectionVcCannotForwardToSubnet Unsigned32, mscRsaConnectionVcNotDataXferToSubnet Unsigned32, mscRsaConnectionVcOutOfRangeFrmFromSubnet Unsigned32, mscRsaConnectionVcCombErrorsFromSubnet Unsigned32, mscRsaConnectionVcDuplicatesFromSubnet Unsigned32, mscRsaConnectionVcNotDataXferFromSubnet Unsigned32, mscRsaConnectionVcFrmLossTimeouts Unsigned32, mscRsaConnectionVcOoSeqByteCntExceeded Unsigned32, mscRsaConnectionVcPeakOoSeqPktCount Unsigned32, mscRsaConnectionVcPeakOoSeqFrmForwarded Unsigned32, mscRsaConnectionVcSendSequenceNumber Unsigned32, mscRsaConnectionVcPktRetryTimeouts Unsigned32, mscRsaConnectionVcPeakRetryQueueSize Unsigned32, mscRsaConnectionVcSubnetRecoveries Unsigned32, mscRsaConnectionVcOoSeqPktCntExceeded Unsigned32, mscRsaConnectionVcPeakOoSeqByteCount Unsigned32 } mscRsaConnectionVcFrmCongestedToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size." ::= { mscRsaConnectionVcFrdEntry 2 } mscRsaConnectionVcCannotForwardToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well." ::= { mscRsaConnectionVcFrdEntry 3 } mscRsaConnectionVcNotDataXferToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure." ::= { mscRsaConnectionVcFrdEntry 4 } mscRsaConnectionVcOutOfRangeFrmFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late." ::= { mscRsaConnectionVcFrdEntry 5 } mscRsaConnectionVcCombErrorsFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc" ::= { mscRsaConnectionVcFrdEntry 6 } mscRsaConnectionVcDuplicatesFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased." ::= { mscRsaConnectionVcFrdEntry 7 } mscRsaConnectionVcNotDataXferFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery." ::= { mscRsaConnectionVcFrdEntry 8 } mscRsaConnectionVcFrmLossTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet." ::= { mscRsaConnectionVcFrdEntry 9 } mscRsaConnectionVcOoSeqByteCntExceeded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count." ::= { mscRsaConnectionVcFrdEntry 10 } mscRsaConnectionVcPeakOoSeqPktCount OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc." ::= { mscRsaConnectionVcFrdEntry 11 } mscRsaConnectionVcPeakOoSeqFrmForwarded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue." ::= { mscRsaConnectionVcFrdEntry 12 } mscRsaConnectionVcSendSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame." ::= { mscRsaConnectionVcFrdEntry 13 } mscRsaConnectionVcPktRetryTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet." ::= { mscRsaConnectionVcFrdEntry 15 } mscRsaConnectionVcPeakRetryQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets." ::= { mscRsaConnectionVcFrdEntry 16 } mscRsaConnectionVcSubnetRecoveries OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of successful Vc recovery attempts." ::= { mscRsaConnectionVcFrdEntry 17 } mscRsaConnectionVcOoSeqPktCntExceeded OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count." ::= { mscRsaConnectionVcFrdEntry 19 } mscRsaConnectionVcPeakOoSeqByteCount OBJECT-TYPE SYNTAX Unsigned32 (0..50000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc." ::= { mscRsaConnectionVcFrdEntry 20 } mscRsaConnectionVcDmepTable OBJECT-TYPE SYNTAX SEQUENCE OF MscRsaConnectionVcDmepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint." ::= { mscRsaConnectionVc 417 } mscRsaConnectionVcDmepEntry OBJECT-TYPE SYNTAX MscRsaConnectionVcDmepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscRsaConnectionVcDmepTable." INDEX { mscRsaIndex, mscRsaConnectionIndex, mscRsaConnectionVcIndex, mscRsaConnectionVcDmepValue } ::= { mscRsaConnectionVcDmepTable 1 } MscRsaConnectionVcDmepEntry ::= SEQUENCE { mscRsaConnectionVcDmepValue RowPointer } mscRsaConnectionVcDmepValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the mscRsaConnectionVcDmepTable." ::= { mscRsaConnectionVcDmepEntry 1 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mscRsaConnectionVcCannotForwardToSubnet, -- mscRsaDnaIncCalls, -- mscRsaConnectionVcCalledDna, -- mscRsaConnectionVcType, -- mscRsaDnaIncAccess, -- mscRsaConnectionVcSegmentsSent, -- mscRsaVncsAccessRequestsSent, -- mscRsaConnectionVcPreviousState, -- mscRsaConnectionVcSubnetRecoveries, -- mscRsaConnectionVcOoSeqPktCntExceeded, -- mscRsaConnectionVcPeakRetryQueueSize, -- mscRsaDnaRowStatus, -- mscRsaConnectionLapfState, -- mscRsaVncsAccessStorageType, -- mscRsaVncsAccessRequestsQueued, -- mscRsaConnectionVcSegmentSize, -- mscRsaDnaCugComponentName, -- mscRsaConnectionVcEmissionPriorityFromNetwork, -- mscRsaConnectionCallState, -- mscRsaConnectionVcFastSelectCall, -- mscRsaDnaCugInterlockCode, -- mscRsaConnectionVcComponentName, -- mscRsaDnaNumberingPlanIndicator, -- mscRsaVncsAccessAdminState, -- mscRsaLogicalProcessor, -- mscRsaConnectionVcMaxSubnetPktSize, -- mscRsaDnaCugOutCalls, -- mscRsaVncsAccessRowStatus, -- mscRsaConnectionLapfAckTimeouts, -- mscRsaConnectionVcPriority, -- mscRsaConnectionVcPathReliability, -- mscRsaConnectionVcSendSequenceNumber, -- mscRsaConnectionVcOoSeqByteCntExceeded, -- mscRsaDnaCugPreferential, -- mscRsaConnectionLapfStateChanges, -- mscRsaConnectionVcCallingNpi, -- mscRsaConnectionVcState, -- mscRsaComponentName, -- mscRsaVncsAccessUsageState, -- mscRsaConnectionLapfIFramesTx, -- mscRsaVncsAccessOperationalState, -- mscRsaMaxRsiConnections, -- mscRsaConnectionVcEmissionPriorityToNetwork, -- mscRsaDnaCugStorageType, -- mscRsaConnectionVcPeakOoSeqByteCount, -- mscRsaConnectionLapfQueueSize, -- mscRsaDnaCugPrivileged, -- mscRsaRsiConnections, -- mscRsaDnaCugIncCalls, -- mscRsaConnectionVcStorageType, -- mscRsaConnectionLapfIFramesRxDiscarded, -- mscRsaConnectionVcFrmLossTimeouts, -- mscRsaConnectionVncsReplies, -- mscRsaVncsAccessRepliesReceived, -- mscRsaVncsAccessTimeToLive, -- mscRsaConnectionVcAccountingEnd, -- mscRsaConnectionVcCalledNpi, -- mscRsaConnectionVcElapsedTimeTillNow, -- mscRsaConnectionComponentName, -- mscRsaConnectionVcPeakOoSeqPktCount, -- mscRsaDnaCugRowStatus, -- mscRsaConnectionVcNotDataXferToSubnet, -- mscRsaConnectionLapfRemoteBusy, -- mscRsaConnectionVcCallReferenceNumberDecimal, -- mscRsaConnectionVcRowStatus, -- mscRsaConnectionVcRcosToNetwork, -- mscRsaStorageType, -- mscRsaConnectionVcPreviousDiagnosticCode, -- mscRsaVncsAccessRequestsDiscarded, -- mscRsaDnaCugDnic, -- mscRsaConnectionLapfIFramesTxDiscarded, -- mscRsaConnectionLapfIFramesRx, -- mscRsaConnectionRemoteName, -- mscRsaDnaComponentName, -- mscRsaConnectionVcCombErrorsFromSubnet, -- mscRsaConnectionVcCallingDna, -- mscRsaConnectionVcDataPath, -- mscRsaAdminState, -- mscRsaConnectionVcPeakOoSeqFrmForwarded, -- mscRsaConnectionVcSegmentsRx, -- mscRsaConnectionVcFrmCongestedToSubnet, -- mscRsaRowStatus, -- mscRsaConnectionVncsRequests, -- mscRsaDnaOutCalls, -- mscRsaConnectionVcAccountingEnabled, -- mscRsaConnectionVcNotDataXferFromSubnet, -- mscRsaConnectionStorageType, -- mscRsaConnectionVcDmepValue, -- mscRsaUsageState, -- mscRsaVncsAccessComponentName, -- mscRsaConnectionVcCalledLcn, -- mscRsaConnectionVcRcosFromNetwork, -- mscRsaConnectionVcDuplicatesFromSubnet, -- mscRsaConnectionVcStartTime, -- mscRsaOperationalState, -- mscRsaConnectionVcDiagnosticCode, -- mscRsaConnectionLapfRejectFramesRx, -- mscRsaDnaDataNetworkAddress, -- mscRsaConnectionRowStatus, -- mscRsaConnectionVcCallingLcn, -- mscRsaDnaStorageType, -- mscRsaDnaCugType, -- mscRsaConnectionVcPktRetryTimeouts, -- mscRsaConnectionVcOutOfRangeFrmFromSubnet } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." serverAccessRsaGroup OBJECT IDENTIFIER ::= { serverAccessRsaMIB 1 } serverAccessRsaGroupCA OBJECT IDENTIFIER ::= { serverAccessRsaGroup 1 } serverAccessRsaGroupCA02 OBJECT IDENTIFIER ::= { serverAccessRsaGroupCA 3 } serverAccessRsaGroupCA02A OBJECT IDENTIFIER ::= { serverAccessRsaGroupCA02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "MscPassport Release 1.2 ServerAccessRsa." -- STATUS mandatory -- DESCRIPTION "Carrier Passport ServerAccessRsa MIB: MIB Version CA02A, -- Software Version CA02S9C." -- SUPPORTS Nortel-MsCarrier-MscPassport-ServerAccessRsaMIB -- INCLUDES { serverAccessRsaGroupCA02A } serverAccessRsaCapabilities OBJECT IDENTIFIER ::= { serverAccessRsaMIB 3 } serverAccessRsaCapabilitiesCA OBJECT IDENTIFIER ::= { serverAccessRsaCapabilities 1 } serverAccessRsaCapabilitiesCA02 OBJECT IDENTIFIER ::= { serverAccessRsaCapabilitiesCA 3 } serverAccessRsaCapabilitiesCA02A OBJECT IDENTIFIER ::= { serverAccessRsaCapabilitiesCA02 2 } END