Nortel-MsCarrier-MscPassport-CallRedirectionMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 mscPassportMIBs, mscComponents FROM Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB AsciiString, NonReplicated, Link, AsciiStringIndex FROM Nortel-MsCarrier-MscPassport-TextualConventionsMIB; -- LAST-UPDATED "9909010000Z" -- ORGANIZATION "Nortel Networks" -- CONTACT-INFO " -- Nortel Carrier Data Network Management -- -- Postal: P.O. Box 3511, Station C -- Ottawa, Ontario -- Canada K1Y 4H7 -- -- via the WEB: http://www.nortelnetworks.com -- select 'Contact Us' from the menu -- -- via phone: 1-800-4NORTEL" -- DESCRIPTION -- "The module describing the Nortel MsCarrier MscPassport -- CallRedirection Enterprise MIB." callRedirectionMIB OBJECT IDENTIFIER ::= { mscPassportMIBs 132 } -- CallRedirectionServer -- The CallRedirectionServer component provides a set of alternate -- destinations for an original address. The alternate destination could -- be DPRS routing information (that is, RID/MID) or up to seven -- addresses. mscCrs OBJECT IDENTIFIER ::= { mscComponents 132 } mscCrsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscCrs components." ::= { mscCrs 1 } mscCrsRowStatusEntry OBJECT-TYPE SYNTAX MscCrsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscCrs component." INDEX { mscCrsIndex } ::= { mscCrsRowStatusTable 1 } MscCrsRowStatusEntry ::= SEQUENCE { mscCrsRowStatus RowStatus, mscCrsComponentName DisplayString, mscCrsStorageType StorageType, mscCrsIndex NonReplicated } mscCrsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscCrs components. These components can be added and deleted." ::= { mscCrsRowStatusEntry 1 } mscCrsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscCrsRowStatusEntry 2 } mscCrsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscCrs tables." ::= { mscCrsRowStatusEntry 4 } mscCrsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscCrs tables." ::= { mscCrsRowStatusEntry 10 } mscCrsProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisioned group contains provisionable attributes of the CallRedirectionServer component." ::= { mscCrs 10 } mscCrsProvEntry OBJECT-TYPE SYNTAX MscCrsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscCrsProvTable." INDEX { mscCrsIndex } ::= { mscCrsProvTable 1 } MscCrsProvEntry ::= SEQUENCE { mscCrsLogicalProcessor Link } mscCrsLogicalProcessor OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the logical processor on which the call redirection server process is to run." ::= { mscCrsProvEntry 2 } mscCrsStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscCrs 11 } mscCrsStateEntry OBJECT-TYPE SYNTAX MscCrsStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscCrsStateTable." INDEX { mscCrsIndex } ::= { mscCrsStateTable 1 } MscCrsStateEntry ::= SEQUENCE { mscCrsAdminState INTEGER, mscCrsOperationalState INTEGER, mscCrsUsageState INTEGER } mscCrsAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscCrsStateEntry 1 } mscCrsOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscCrsStateEntry 2 } mscCrsUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscCrsStateEntry 3 } mscCrsStatTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Statistics operational group defines the statistics associated with the CallRedirectionServer component." ::= { mscCrs 12 } mscCrsStatEntry OBJECT-TYPE SYNTAX MscCrsStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscCrsStatTable." INDEX { mscCrsIndex } ::= { mscCrsStatTable 1 } MscCrsStatEntry ::= SEQUENCE { mscCrsTotalAddresses Unsigned32, mscCrsRequestsReceived Counter32, mscCrsPrimaryMatches Counter32, mscCrsSecAddressListExhausted Counter32, mscCrsMaxAddrLenExceeded Counter32, mscCrsSecRidMidUnsuccessful Counter32, mscCrsSecAddrUnsuccessful Counter32, mscCrsRidRedirected Counter32, mscCrsRidMidRedirected Counter32, mscCrsAddressRedirected Counter32, mscCrsAltRidUnsuccessful Counter32 } mscCrsTotalAddresses OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The totalAddresses attribute indicates the number of PrimaryAddress components associated with the CallRedirectionServer component." DEFVAL { 0 } ::= { mscCrsStatEntry 2 } mscCrsRequestsReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The requestsReceived attribute counts the number of redirection requests received by the CallRedirectionServer component. This counter wraps to 0 when it exceeds its maximum value." ::= { mscCrsStatEntry 3 } mscCrsPrimaryMatches OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The primaryMatches attribute counts the Call Redirection Server attempts to find a matching PrimaryAddress where the lookup attempt was successful. This counter wraps to 0 when it exceeds its maximum value." ::= { mscCrsStatEntry 4 } mscCrsSecAddressListExhausted OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The secAddressListExhausted attribute counts the Call Redirection Server attempts to find a SecondaryAddress component given a PrimaryAddress component where the lookup attempt resulted in the exhaustion of the secondary redirection list. This counter wraps to 0 when it exceeds its maximum value." ::= { mscCrsStatEntry 5 } mscCrsMaxAddrLenExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The maxAddrLenExceeded attribute counts how often the concatenation of the secondary address and the suffix digits from the original called address have exceeded the maximum of 15 digits. The suffix digits can be determined by removing the primary address digits from the front of the original called address. If appending the suffix digits to a secondary address causes the resulting address to exceed 15 digits, this secondary member is skipped and the next secondary member is tried." ::= { mscCrsStatEntry 6 } mscCrsSecRidMidUnsuccessful OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The secRidMidUnsuccessful attribute counts the number of RID/ MID redirections resulting in the destination address not being reached. This situation could occur when the destination address does not exist on the specified module or the specified module could not be reached." ::= { mscCrsStatEntry 7 } mscCrsSecAddrUnsuccessful OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The secAddrUnsuccessful attribute counts the number of Address redirections resulting in the destination user not being reached. This situation could occur when the destination user line is disabled, the destination address does not exist on the specified module, or the specified module could not be reached." ::= { mscCrsStatEntry 8 } mscCrsRidRedirected OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The ridRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another RID specified by the AlternateRid component. This counter wraps to 0 when it exceeds its maximum value." ::= { mscCrsStatEntry 9 } mscCrsRidMidRedirected OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The ridMidRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another RID/MID specified by the SecondaryRidMid component. This counter wraps to 0 when it exceeds its maximum value." ::= { mscCrsStatEntry 10 } mscCrsAddressRedirected OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The addressRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another Address specified by the SecondaryAddress component. This counter wraps to 0 when it exceeds its maximum value." ::= { mscCrsStatEntry 11 } mscCrsAltRidUnsuccessful OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The altRidUnsuccessful attribute counts the number of RID redirections resulting in the destination address not being reached. This situation could occur when the alternate RID cannot be reached, the module hosting the destination address is isolated, or the port associated with the secondary address is unavailable at the alternate RID." ::= { mscCrsStatEntry 12 } -- Crs PrimaryAddress/
-- The PrimaryAddress component defines a primary address for -- which a list of alternate destinations are specified. This primary -- address has either a secondary RID/MID destination or up to seven -- secondary addresses associated with it. -- A primary address matches the original destination address if, -- beginning with the most significant digit, all digits are identical and -- the primary address is less than or equal to the original destination -- address in length. The "best match" is the longest such primary -- address. -- The PrimaryAddress component instance value takes the form: -- x. or e. mscCrsPAddr OBJECT IDENTIFIER ::= { mscCrs 2 } mscCrsPAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsPAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscCrsPAddr components." ::= { mscCrsPAddr 1 } mscCrsPAddrRowStatusEntry OBJECT-TYPE SYNTAX MscCrsPAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscCrsPAddr component." INDEX { mscCrsIndex, mscCrsPAddrIndex } ::= { mscCrsPAddrRowStatusTable 1 } MscCrsPAddrRowStatusEntry ::= SEQUENCE { mscCrsPAddrRowStatus RowStatus, mscCrsPAddrComponentName DisplayString, mscCrsPAddrStorageType StorageType, mscCrsPAddrIndex AsciiStringIndex } mscCrsPAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscCrsPAddr components. These components can be added and deleted." ::= { mscCrsPAddrRowStatusEntry 1 } mscCrsPAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscCrsPAddrRowStatusEntry 2 } mscCrsPAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscCrsPAddr tables." ::= { mscCrsPAddrRowStatusEntry 4 } mscCrsPAddrIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscCrsPAddr tables." ::= { mscCrsPAddrRowStatusEntry 10 } -- Crs Paddr/
SecondaryRidMid -- The SecondaryRidMid component identifies an alternate destination -- module on which the primary address is also supported. RID/MID -- redirection allows the call redirection server to effectively override -- the original destination identified by the call routing system and -- forward the call to a different module. mscCrsPAddrSRidMid OBJECT IDENTIFIER ::= { mscCrsPAddr 2 } mscCrsPAddrSRidMidRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsPAddrSRidMidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscCrsPAddrSRidMid components." ::= { mscCrsPAddrSRidMid 1 } mscCrsPAddrSRidMidRowStatusEntry OBJECT-TYPE SYNTAX MscCrsPAddrSRidMidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscCrsPAddrSRidMid component." INDEX { mscCrsIndex, mscCrsPAddrIndex, mscCrsPAddrSRidMidIndex } ::= { mscCrsPAddrSRidMidRowStatusTable 1 } MscCrsPAddrSRidMidRowStatusEntry ::= SEQUENCE { mscCrsPAddrSRidMidRowStatus RowStatus, mscCrsPAddrSRidMidComponentName DisplayString, mscCrsPAddrSRidMidStorageType StorageType, mscCrsPAddrSRidMidIndex NonReplicated } mscCrsPAddrSRidMidRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscCrsPAddrSRidMid components. These components can be added and deleted." ::= { mscCrsPAddrSRidMidRowStatusEntry 1 } mscCrsPAddrSRidMidComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscCrsPAddrSRidMidRowStatusEntry 2 } mscCrsPAddrSRidMidStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscCrsPAddrSRidMid tables." ::= { mscCrsPAddrSRidMidRowStatusEntry 4 } mscCrsPAddrSRidMidIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscCrsPAddrSRidMid tables." ::= { mscCrsPAddrSRidMidRowStatusEntry 10 } mscCrsPAddrSRidMidRidMidProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsPAddrSRidMidRidMidProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SecRidMidProv group defines the secondary RID/MID pair associated with a specific primary address." ::= { mscCrsPAddrSRidMid 10 } mscCrsPAddrSRidMidRidMidProvEntry OBJECT-TYPE SYNTAX MscCrsPAddrSRidMidRidMidProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscCrsPAddrSRidMidRidMidProvTable." INDEX { mscCrsIndex, mscCrsPAddrIndex, mscCrsPAddrSRidMidIndex } ::= { mscCrsPAddrSRidMidRidMidProvTable 1 } MscCrsPAddrSRidMidRidMidProvEntry ::= SEQUENCE { mscCrsPAddrSRidMidRoutingId Unsigned32, mscCrsPAddrSRidMidModuleId Unsigned32 } mscCrsPAddrSRidMidRoutingId OBJECT-TYPE SYNTAX Unsigned32 (1..126) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a group of one or more interconnected nodes (called a subnet) to which the primary address is redirected." ::= { mscCrsPAddrSRidMidRidMidProvEntry 2 } mscCrsPAddrSRidMidModuleId OBJECT-TYPE SYNTAX Unsigned32 (1..1909) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a Passport node to which the primary address is redirected." ::= { mscCrsPAddrSRidMidRidMidProvEntry 3 } -- Crs Paddr/
SecondaryAddress/n -- The SecondaryAddress component identifies an alternate destination -- address. Address redirection allows the call redirection server to -- effectively override the original destination address and forward the -- call to a different destination within the Passport network. mscCrsPAddrSAddr OBJECT IDENTIFIER ::= { mscCrsPAddr 3 } mscCrsPAddrSAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsPAddrSAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscCrsPAddrSAddr components." ::= { mscCrsPAddrSAddr 1 } mscCrsPAddrSAddrRowStatusEntry OBJECT-TYPE SYNTAX MscCrsPAddrSAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscCrsPAddrSAddr component." INDEX { mscCrsIndex, mscCrsPAddrIndex, mscCrsPAddrSAddrIndex } ::= { mscCrsPAddrSAddrRowStatusTable 1 } MscCrsPAddrSAddrRowStatusEntry ::= SEQUENCE { mscCrsPAddrSAddrRowStatus RowStatus, mscCrsPAddrSAddrComponentName DisplayString, mscCrsPAddrSAddrStorageType StorageType, mscCrsPAddrSAddrIndex Integer32 } mscCrsPAddrSAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscCrsPAddrSAddr components. These components can be added and deleted." ::= { mscCrsPAddrSAddrRowStatusEntry 1 } mscCrsPAddrSAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscCrsPAddrSAddrRowStatusEntry 2 } mscCrsPAddrSAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscCrsPAddrSAddr tables." ::= { mscCrsPAddrSAddrRowStatusEntry 4 } mscCrsPAddrSAddrIndex OBJECT-TYPE SYNTAX Integer32 (1..7) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscCrsPAddrSAddr tables." ::= { mscCrsPAddrSAddrRowStatusEntry 10 } mscCrsPAddrSAddrSecAddrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsPAddrSAddrSecAddrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SecAddrProv group defines one of the secondary addresses associated with a specific primary address." ::= { mscCrsPAddrSAddr 10 } mscCrsPAddrSAddrSecAddrProvEntry OBJECT-TYPE SYNTAX MscCrsPAddrSAddrSecAddrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscCrsPAddrSAddrSecAddrProvTable." INDEX { mscCrsIndex, mscCrsPAddrIndex, mscCrsPAddrSAddrIndex } ::= { mscCrsPAddrSAddrSecAddrProvTable 1 } MscCrsPAddrSAddrSecAddrProvEntry ::= SEQUENCE { mscCrsPAddrSAddrAddress AsciiString } mscCrsPAddrSAddrAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..17)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a secondary address to which the primary address is redirected. The address attribute includes the Numbering Plan Indicator (NPI) and the digits which form a unique identifier of the customer interface. The address may belong to the X.121 or E.164 addressing plan. Address digits are selected and assigned by network operators. The address attribute takes the form: x. or e." ::= { mscCrsPAddrSAddrSecAddrProvEntry 3 } -- Crs AlternateRid -- The AlternateRid component defines the routing identifier value that -- is used as the alternate DPRS routing information when routing to -- the RID specified by the Call Router (CR) is unsuccessful. This -- component should only be provisioned as a temporary -- measure.When activated the RID redirection feature as significant -- impact on the normal redirection operation, since RID redirection is -- always attempted first. -- One of the possible application of this feature being RID splitting, -- the AlternateRid component should be deleted as soon as all module -- have been migrated from their original RID and the Call Router -- (CR) throughout the network have been updated with the new RID -- information. mscCrsAltRid OBJECT IDENTIFIER ::= { mscCrs 3 } mscCrsAltRidRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsAltRidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscCrsAltRid components." ::= { mscCrsAltRid 1 } mscCrsAltRidRowStatusEntry OBJECT-TYPE SYNTAX MscCrsAltRidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscCrsAltRid component." INDEX { mscCrsIndex, mscCrsAltRidIndex } ::= { mscCrsAltRidRowStatusTable 1 } MscCrsAltRidRowStatusEntry ::= SEQUENCE { mscCrsAltRidRowStatus RowStatus, mscCrsAltRidComponentName DisplayString, mscCrsAltRidStorageType StorageType, mscCrsAltRidIndex NonReplicated } mscCrsAltRidRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscCrsAltRid components. These components can be added and deleted." ::= { mscCrsAltRidRowStatusEntry 1 } mscCrsAltRidComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscCrsAltRidRowStatusEntry 2 } mscCrsAltRidStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscCrsAltRid tables." ::= { mscCrsAltRidRowStatusEntry 4 } mscCrsAltRidIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscCrsAltRid tables." ::= { mscCrsAltRidRowStatusEntry 10 } mscCrsAltRidAltRidProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscCrsAltRidAltRidProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The AltRidProv group defines the alternate RID associated with the Crs component." ::= { mscCrsAltRid 10 } mscCrsAltRidAltRidProvEntry OBJECT-TYPE SYNTAX MscCrsAltRidAltRidProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscCrsAltRidAltRidProvTable." INDEX { mscCrsIndex, mscCrsAltRidIndex } ::= { mscCrsAltRidAltRidProvTable 1 } MscCrsAltRidAltRidProvEntry ::= SEQUENCE { mscCrsAltRidRoutingId Unsigned32 } mscCrsAltRidRoutingId OBJECT-TYPE SYNTAX Unsigned32 (1..126) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a group of one or more interconnected nodes (called a subnet) to which the request is redirected." ::= { mscCrsAltRidAltRidProvEntry 2 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mscCrsPAddrSAddrRowStatus, -- mscCrsStorageType, -- mscCrsOperationalState, -- mscCrsPAddrSRidMidComponentName, -- mscCrsAltRidStorageType, -- mscCrsPAddrSRidMidRowStatus, -- mscCrsPAddrStorageType, -- mscCrsLogicalProcessor, -- mscCrsAltRidRowStatus, -- mscCrsAdminState, -- mscCrsSecAddrUnsuccessful, -- mscCrsAltRidComponentName, -- mscCrsAltRidUnsuccessful, -- mscCrsSecAddressListExhausted, -- mscCrsPAddrSAddrComponentName, -- mscCrsPAddrComponentName, -- mscCrsSecRidMidUnsuccessful, -- mscCrsRowStatus, -- mscCrsComponentName, -- mscCrsPAddrSAddrStorageType, -- mscCrsRidRedirected, -- mscCrsPAddrSAddrAddress, -- mscCrsPrimaryMatches, -- mscCrsPAddrSRidMidStorageType, -- mscCrsTotalAddresses, -- mscCrsPAddrRowStatus, -- mscCrsPAddrSRidMidRoutingId, -- mscCrsAltRidRoutingId, -- mscCrsUsageState, -- mscCrsPAddrSRidMidModuleId, -- mscCrsRidMidRedirected, -- mscCrsRequestsReceived, -- mscCrsMaxAddrLenExceeded, -- mscCrsAddressRedirected } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." callRedirectionGroup OBJECT IDENTIFIER ::= { callRedirectionMIB 1 } callRedirectionGroupCA OBJECT IDENTIFIER ::= { callRedirectionGroup 1 } callRedirectionGroupCA02 OBJECT IDENTIFIER ::= { callRedirectionGroupCA 3 } callRedirectionGroupCA02A OBJECT IDENTIFIER ::= { callRedirectionGroupCA02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "MscPassport Release 1.2 CallRedirection." -- STATUS mandatory -- DESCRIPTION "Carrier Passport CallRedirection MIB: MIB Version CA02A, -- Software Version CA02S9C." -- SUPPORTS Nortel-MsCarrier-MscPassport-CallRedirectionMIB -- INCLUDES { callRedirectionGroupCA02A } callRedirectionCapabilities OBJECT IDENTIFIER ::= { callRedirectionMIB 3 } callRedirectionCapabilitiesCA OBJECT IDENTIFIER ::= { callRedirectionCapabilities 1 } callRedirectionCapabilitiesCA02 OBJECT IDENTIFIER ::= { callRedirectionCapabilitiesCA 3 } callRedirectionCapabilitiesCA02A OBJECT IDENTIFIER ::= { callRedirectionCapabilitiesCA02 2 } END