-- file: NncExtSPVC.mib -- -- description: -- This file contains the SPVC MIB implementation for Alcatel CID -- (Carrier Internetworking Division) equipment. It consists of eight MIB -- tables, four source endpoint tables (nncCrSpvpcTable, nncCrSpvccTable, -- nncFrSpvcTable and nncCeSpvcTable) and four destination endpoint tables -- (nncCrSpvpcDstCfgTable, nncCrSpvccDstCfgTable, nncFrSpvcDstCfgTable, -- and nncCeSpvcDstCfgTable). -- -- -- history: -- $Log: 2.NncExtSPVC.mib,v $ -- Revision 1.1.1.5 2001/03/09 02:05:16 wmcconno -- P.337630: CE-CE updates to the mib and imp -- -- Revision 1.1.1.4 2001/02/01 22:53:32 wmcconno -- P.331882: Updated creator for 5620 and added AtmFormatDisplay for TarEpAddr objects -- -- Revision 1.1.1.3 2000/12/21 00:33:18 wmcconno -- P.331183: Update Frame attributes to reflect DS3 Cards due to comments from Rennes Frame Group -- -- Revision 1.1.1.2 2000/10/03 14:37:28 sbasinsk -- 31A1564: Merge from cr_kan_pm_43 to ctl (new file) -- -- Revision 1.1.1.1.1.4 2000/09/27 19:57:03 atsang -- P.325414: Added new object in CrSpvpc/CrSpvcc/Fr/Ce src tables to extract creator for SPVC connection, also updated some comments in some objects -- -- Revision 1.1.1.1.1.3 2000/09/12 17:41:17 jiaoul -- P.324163: Add SNMP support for SPVC LOC feature -- -- Revision 1.1.1.1.1.2 2000/08/31 14:02:27 atsang -- 31A1373: Added new MIB for SNMP SPVC feature -- -- %%history-start%% -- %%history-end%% -- -- Copyright 2001 Alcatel Networks Corporation. All Rights Reserved -------------------------------------------------------------------------------- NNCEXTSPVC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC ifIndex FROM IF-MIB atmVplVpi, atmVclVpi, atmVclVci FROM ATM-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF nncExtensions FROM NNCGNI0001-SMI; nncExtSpvc MODULE-IDENTITY LAST-UPDATED "20010215121735Z" ORGANIZATION "Alcatel CID" CONTACT-INFO "Alcatel CID Postal: 600 March Road Kanata, Ontario Canada K2K 2E6 Phone: +1 613 591 3600 Fax: +1 613 591 3680" DESCRIPTION "This module contains Alcatel CID's proprietary MIB definition for managing Soft Permanent Virtual Connections (SPVCs). This MIB supports the creation, modification, query, and deletion of SPVCs (Soft Permanent Virtual Connections), on Cell Relay (ATM), Frame Relay, and Circuit Emulation endpoints. For Cell Relay-based endpoints, Permanent Virtual Path Connection (PVPC) and Permanent Virtual Channel Connection (PVCC) are supported, while SPVCCs are supported on Frame Relay and Circuit Emulation endpoints. Cell Relay SPVCs, Frame Relay SPVCs and Circuit Emulation SPVCs are supported in this MIB. SPVCs with any other service types are not supported at this point. For SPVCs interworking across different endpoint types, CR to FR, FR to CR, CR to CE, CE to CR connections are supported. CE to FR or FR to CE are not suppported. Operator directed routing for SPVC connections is not supported at this point. To create an SPVC, the required MIB objects from the destination table must be configured and sent to the destination endpoint. Next, the MIB objects from the source endpoint table (based on the endpoint type and SPVC type - either nncCrSpvpcTable, nncCrSpvccTable, nncFrSpvcTable, or nncCeSpvcTable) are configured and sent to the source endpoint. Assuming a PDU with a RowStatus of 'createAndGo' or 'Active' has been received, if the adminStatus of the SPVC is set to 'enabled', the SPVC will be connected; if the adminStatus of the SPVC is set to 'disabled', the SPVC will be configured but not connected. SPVC creation SET-REQuests can be sent two ways: using a RowStatus value of 'createAndGo', or using multiple SET-REQs using RowStatus values of 'createAndWait' and 'active'. Creating an SPVC using rowStatus=createAndWait(5) In the case of multiple SET-REQs, the RowStatus is set to createAndWait(5) for all but the last SET-REQ, and set to active(1) for the last SET-REQ. The SPVC is configured only after the last PDU (with RowStatus as 'active') is received. Creating an SPVC using rowStatus=createAndGo(4) In the other case, all required MIB objects can fit in one SET-REQ. If using only one SET-REQ, the RowStatus should be set to createAndGo(4). In both cases, default values for MIB objects will be used wherever possible. To delete an SPVC, the correct table objects must be sent to both the destination endpoint and the source endpoint for the given SPVC, using the correct index, and setting the rowStatus to 'destroy'. This will delete the specified SPVC. Some abreviations: abr/ABR/Abr: Available Bit Rate Bwd: Backward. For traffice descriptors from destination endpoint to source endpoint (receiving traffic) cbr/CBR/Cbr: Constant Bit Rate Dst: Destination endpoint Fwd: Forward. For traffic descriptors from source endpoint to destination endpoint (transmitting traffic) nt-vbr/nrtvbr/NRT-VBR: Non-Real-Time Variable Bit Rate Src: Source endpoint Targ: Target. For the destination endpoint info in source endpoint table ubr/UBR/Ubr: Unspecified Bit Rate " ::= { nncExtensions 82 } AtmFormatDisplay ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x-2x-10x-6x-1x" STATUS current DESCRIPTION "This display is for the ATM address prefix format. The following formats which are supported are displayed: DCC ATM Format ------------------------------------------------------------- |A | | | | | | | | | | | | | | | | | | | S| |F | DCC | HO-DSP | ESI | E| |I | | | | | | | | | | | | | | | | | | | L| ------------------------------------------------------------- |...IDP..|......................DSP.........................| |.IDI.| ICD ATM Format ------------------------------------------------------------- |A | | | | | | | | | | | | | | | | | | | S| |F | ICD | HO-DSP | ESI | E| |I | | | | | | | | | | | | | | | | | | | L| ------------------------------------------------------------- |...IDP..|......................DSP.........................| |.IDI.| For the DCC ATM Format, the following format will be displayed: afi-dcc-hodsp-esi-sel For the ICD ATM Format, the following format will be displayed: afi-icd-hodsp-esi-sel Abbreviations: IDP: Initial Domain Part AFI: Authority and Format Identifier IDI: Initial Domain Part DCC: Data Country Code ICD: International Code Designator DSP: Domain Specific Part HO-DSP: The coding of this field is specified by the authority or the coding scheme identified by the IDP. ESI: End System Identifier SEL: Selector " SYNTAX OCTET STRING (SIZE (20)) nncExtSpvcObjects OBJECT IDENTIFIER ::= { nncExtSpvc 1 } -- nncExtSpvcTraps OBJECT IDENTIFIER ::= { nncExtSpvc 2 } nncExtSpvcGroups OBJECT IDENTIFIER ::= { nncExtSpvc 3 } nncExtSpvcCompliances OBJECT IDENTIFIER ::= { nncExtSpvc 4 } --------------------------------------------------------------------------- -- Table Definition -- -- nncCrSpvpcTable -- This table contains all information used to manage Cell Relay SPVPCs -- (Soft Permanent Virtual Path Connections) -- --------------------------------------------------------------------------- nncCrSpvpcTable OBJECT-TYPE SYNTAX SEQUENCE OF NncCrSpvpcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "nncCrSpvpcTable contains all the objects sent to a source endpoint that are used to create, modify, query and delete SPVC connections." ::= { nncExtSpvcObjects 1 } nncCrSpvpcTableEntry OBJECT-TYPE SYNTAX NncCrSpvpcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncCrSpvpcTable" INDEX {ifIndex, atmVplVpi} ::= { nncCrSpvpcTable 1 } NncCrSpvpcTableEntry ::= SEQUENCE{ nncCrSpvpcServiceCategory INTEGER, nncCrSpvpcTargEpAddr AtmFormatDisplay, nncCrSpvpcTargVpi INTEGER, nncCrSpvpcAdminStatus INTEGER, nncCrSpvpcPriority INTEGER, nncCrSpvpcMaxAdminWeight Integer32, nncCrSpvpcOperation INTEGER, nncCrSpvpcCallStatus INTEGER, nncCrSpvpcLocRerouteConfig INTEGER, nncCrSpvpcFwdAbrDynTrfcIcr INTEGER, nncCrSpvpcFwdAbrDynTrfcRif INTEGER, nncCrSpvpcFwdAbrDynTrfcRdf INTEGER, nncCrSpvpcBwdAbrDynTrfcIcr INTEGER, nncCrSpvpcBwdAbrDynTrfcRif INTEGER, nncCrSpvpcBwdAbrDynTrfcRdf INTEGER, nncCrSpvpcSrcBillingFlag INTEGER, nncCrSpvpcFwdTmTrafficDescriptor INTEGER, nncCrSpvpcFwdTmPolicingOption INTEGER, nncCrSpvpcFwdTmBucketOneRate INTEGER, nncCrSpvpcFwdTmBucketOneCdvt INTEGER, nncCrSpvpcFwdTmBucketTwoRate INTEGER, nncCrSpvpcFwdTmBucketTwoMbs INTEGER, nncCrSpvpcFwdTmCdv INTEGER, nncCrSpvpcFwdTmClr INTEGER, nncCrSpvpcBwdTmTrafficDescriptor INTEGER, nncCrSpvpcBwdTmPolicingOption INTEGER, nncCrSpvpcBwdTmBucketOneRate INTEGER, nncCrSpvpcBwdTmBucketOneCdvt INTEGER, nncCrSpvpcBwdTmBucketTwoRate INTEGER, nncCrSpvpcBwdTmBucketTwoMbs INTEGER, nncCrSpvpcBwdTmCdv INTEGER, nncCrSpvpcBwdTmClr INTEGER, nncCrSpvpcCreator INTEGER, nncCrSpvpcRowStatus RowStatus } nncCrSpvpcServiceCategory OBJECT-TYPE SYNTAX INTEGER { cbr(1), nrtvbr(2), abr(3), ubr(4), rtvbr(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the traffic service category. This object is dependent on the value specified in nncCrSpvpcTrafficDescriptor" DEFVAL { nrtvbr } ::= { nncCrSpvpcTableEntry 1 } nncCrSpvpcTargEpAddr OBJECT-TYPE SYNTAX AtmFormatDisplay MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the 20 byte AESA address for the target endpoint. The address map is as the following: Byte\Bit 8 7 6 5 4 3 2 1 ------------------------------------------------------------------------ 1-13 byte | 13-byte Internal Subscriber Prefix | ------------------------------------------------------------------------ 14th byte | I/G | U/L | OUI(most significant 6 bits) | ------------------------------------------------------------------------ 15th byte | OUI(2nd most significant 8 bits | ------------------------------------------------------------------------ 16th byte | OUI(3rd most significant 8 bits | ------------------------------------------------------------------------ 17th byte | Shelf/Slot(1st most significant 8 bits | ------------------------------------------------------------------------ 18th byte | Shelf/Slot(2nd most significant 8 bits | ------------------------------------------------------------------------ 19th byte |Flag0| Port | ------------------------------------------------------------------------ 20th byte | 0 | ------------------------------------------------------------------------ " ::= { nncCrSpvpcTableEntry 2 } nncCrSpvpcTargVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the virtual path identifier (VPI) value for the target endpoint. Range: 0 - 4095" ::= { nncCrSpvpcTableEntry 3 } nncCrSpvpcAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabled, the SPVC is connected when possible. Use nncCrSpvpcAdminStatus to determine if the connection is successful." ::= { nncCrSpvpcTableEntry 4 } nncCrSpvpcPriority OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the priority for a SPVC connection request. It ranges between 1-16, with the following values: Best Priority = 1 Default Priority = 3 Worst Priority = 16" DEFVAL { 3 } ::= { nncCrSpvpcTableEntry 5 } nncCrSpvpcMaxAdminWeight OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set a cost threshold for an SPVC connection. If the total cost of all VPCs exceeds this weight value for a given path, this SPVC will choose an alternative path or give up. Infinite = -1 Min Admin Weight = 0 Max Admin Weight = 2147483647" DEFVAL { -1 } ::= { nncCrSpvpcTableEntry 6 } nncCrSpvpcOperation OBJECT-TYPE SYNTAX INTEGER { reRouteDualEp(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to request a reroute operation. Querying this object will not provide any useful information." ::= { nncCrSpvpcTableEntry 7 } nncCrSpvpcCallStatus OBJECT-TYPE SYNTAX INTEGER { connected(2), waitingForResources(4), readyToConnect(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object is used to query the state of a particular SPVC. SPVCs that are connected and operational will return a value of 'connected', while those that are incomplete or otherwise unable to be connected will return 'waitingForResources'. SPVCs that are configured but not yet connected will contain a value of 'readyForConnect'." ::= { nncCrSpvpcTableEntry 8 } nncCrSpvpcLocRerouteConfig OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- Disabled enabledUniSide(2), -- Enabled UNI side enabledNniSide(3) -- Enabled NNI side } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for either the UNI side or the NNI side, or disabled." DEFVAL { disabled } ::= { nncCrSpvpcTableEntry 9 } nncCrSpvpcFwdAbrDynTrfcIcr OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR dynamic traffic descriptor's Initial Cell (Information) Rate for the forward direction. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvpcTableEntry 10 } nncCrSpvpcFwdAbrDynTrfcRif OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9" DEFVAL { 9 } ::= { nncCrSpvpcTableEntry 11 } nncCrSpvpcFwdAbrDynTrfcRdf OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Decrease Factor descriptor for the forward direction. Value is expressed as the -power of 2 Range: 0 - 9" DEFVAL { 9 } ::= { nncCrSpvpcTableEntry 12 } nncCrSpvpcBwdAbrDynTrfcIcr OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR dynamic traffic descriptor's Initial Cell Rate for the destination endpoint. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvpcTableEntry 13 } nncCrSpvpcBwdAbrDynTrfcRif OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Increase Factor for the backward direction. Value is expressed as the -power of 2. Range: 0 - 9" DEFVAL { 9 } ::= { nncCrSpvpcTableEntry 14 } nncCrSpvpcBwdAbrDynTrfcRdf OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Decrease Factor descriptor for the backward direction. Value is expressed as the -power of 2 Range: 0 - 9" DEFVAL { 9 } ::= { nncCrSpvpcTableEntry 15 } nncCrSpvpcSrcBillingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Billing Configuration for the source endpoint" DEFVAL { disabled } ::= { nncCrSpvpcTableEntry 16 } -- forward traffic descriptors nncCrSpvpcFwdTmTrafficDescriptor OBJECT-TYPE SYNTAX INTEGER { tagAll(1), p0Plus1(2), p0Plus1SlashS0Plus1(3), p0Plus1SlashS0(4), p0Plus1SlashM0Plus1(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the traffic descriptor for the SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1 (2) (CBR only) P_0+1/S_0+1 (3) (NRT/RT-VBR only) P_0+1/S_0 (4) (NRT/RT-VBR only) P_0+1/M_0+1 (5) (ABR and UBR only)" DEFVAL { p0Plus1SlashS0Plus1 } ::= { nncCrSpvpcTableEntry 17 } nncCrSpvpcFwdTmPolicingOption OBJECT-TYPE SYNTAX INTEGER { disabled(1), tag(2), discard(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing Option for an SPVPC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor" DEFVAL { disabled } ::= { nncCrSpvpcTableEntry 18 } nncCrSpvpcFwdTmBucketOneRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cells are 'excess'. Measured in Kb/s. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvpcTableEntry 19 } nncCrSpvpcFwdTmBucketOneCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 500 } ::= { nncCrSpvpcTableEntry 20 } nncCrSpvpcFwdTmBucketTwoRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for VBR traffic, and the minimum information rate for ABR/UBR traffic. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvpcTableEntry 21 } nncCrSpvpcFwdTmBucketTwoMbs OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells" DEFVAL { 32 } ::= { nncCrSpvpcTableEntry 22 } nncCrSpvpcFwdTmCdv OBJECT-TYPE SYNTAX INTEGER (250..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This value is to set the cell delay variation (CDV) between two endpoints to support the rt-VBR service category. Range: 250-10000 microseconds" DEFVAL { 250 } ::= { nncCrSpvpcTableEntry 23 } nncCrSpvpcFwdTmClr OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The object is to set the cell loss ratio (CLR) between two SPVC endpoints when using the nrt-VBR service category. Value set as 1.0e-#" DEFVAL { 7 } ::= { nncCrSpvpcTableEntry 24 } -- backward traffic descriptors nncCrSpvpcBwdTmTrafficDescriptor OBJECT-TYPE SYNTAX INTEGER { tagAll(1), p0Plus1(2), p0Plus1SlashS0Plus1(3), p0Plus1SlashS0(4), p0Plus1SlashM0Plus1(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the traffic descriptor for the SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1 (2) (CBR only) P_0+1/S_0+1 (3) (NRT/RT-VBR only) P_0+1/S_0 (4) (NRT/RT-VBR only) P_0+1/M_0+1 (5) (ABR and UBR only)" DEFVAL { p0Plus1SlashS0Plus1 } ::= { nncCrSpvpcTableEntry 25 } nncCrSpvpcBwdTmPolicingOption OBJECT-TYPE SYNTAX INTEGER { disabled(1), tag(2), discard(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing Option for an SPVPC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor" DEFVAL { disabled } ::= { nncCrSpvpcTableEntry 26 } nncCrSpvpcBwdTmBucketOneRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for peak information rate (PIR), the cell rate which the source may never exceed. It is used to determine which cells are 'excess'. Measured in Kb/s. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvpcTableEntry 27 } nncCrSpvpcBwdTmBucketOneCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 500 } ::= { nncCrSpvpcTableEntry 28 } nncCrSpvpcBwdTmBucketTwoRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for VBR traffic, and the minimum information rate for ABR/UBR traffic. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvpcTableEntry 29 } nncCrSpvpcBwdTmBucketTwoMbs OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells" DEFVAL { 32 } ::= { nncCrSpvpcTableEntry 30 } nncCrSpvpcBwdTmCdv OBJECT-TYPE SYNTAX INTEGER (250..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This value is to set the cell delay variation (CDV) between two endpoints to support the rt-VBR service category. Range: 250-10000 microseconds" DEFVAL { 250 } ::= { nncCrSpvpcTableEntry 31 } nncCrSpvpcBwdTmClr OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The object is to set the cell loss ratio (CLR) between two SPVC endpoints when using the nrt-VBR service category. Value set as 1.0e-#" DEFVAL { 7 } ::= { nncCrSpvpcTableEntry 32 } nncCrSpvpcCreator OBJECT-TYPE SYNTAX INTEGER { unknown(0), -- Creator is unknown nmti(1), -- Creator is NMTI nm5620(2), -- Creator is 5620 snmp(9) -- Creator is SNMP } MAX-ACCESS read-only STATUS current DESCRIPTION "The object retrieves the creator of a SPVC connection." ::= { nncCrSpvpcTableEntry 33 } nncCrSpvpcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWait', information for a row is cached in memory; when RowStatus is set to 'createAndGo' or 'active', it indicates that all information is to be written to permanent storage, and the SPVC to be enabled (AdminStatus must also be set to 'enabled'). When querying the object, 'active' indicates a configured SPVC with its AdminStatus enabled, while a status of 'notInService' indicates either a disabled AdminStatus or an inability to connect the SPVC. If a query returns 'notInService', use the CallStatus object to further determine the state of the SPVC. If the value 'notReady' is returned, it indicates that the SNMP agent is awaiting further information before activating the connection. When deleting a connection, use this object with the value 'destroy'" ::= {nncCrSpvpcTableEntry 34 } --------------------------------------------------------------------------- -- Table Definition -- -- The nncCrSpvpcDstCfgTable -- This table contains all information used to configure the destination -- endpoint of a CR SPVPC (Soft Permanent Virtual Path Connections --------------------------------------------------------------------------- nncCrSpvpcDstCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF NncCrSpvpcDstCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the nncCrSpvpcDstCfg table contains common objects used to configure, delete, modify and query the destination end point of an SPVC across different Alcatel CID platforms." ::= { nncExtSpvcObjects 2 } nncCrSpvpcDstCfgTableEntry OBJECT-TYPE SYNTAX NncCrSpvpcDstCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncCrSpvpcDstCfgTable." INDEX {ifIndex, atmVplVpi} ::= { nncCrSpvpcDstCfgTable 1 } NncCrSpvpcDstCfgTableEntry ::= SEQUENCE{ nncCrSpvpcDstCfgCdvt INTEGER, nncCrSpvpcDstCfgPolicing INTEGER, nncCrSpvpcDstCfgBillingFlag INTEGER, nncCrSpvpcDstCfgLocRerouteConfig INTEGER, nncCrSpvpcDstCfgRowStatus RowStatus } nncCrSpvpcDstCfgCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 500 } ::= { nncCrSpvpcDstCfgTableEntry 1 } nncCrSpvpcDstCfgPolicing OBJECT-TYPE SYNTAX INTEGER { nullPolicing(0), disabled(1), tag(2), discard(3), useSignalled(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "CR Policing" DEFVAL { disabled } ::= { nncCrSpvpcDstCfgTableEntry 2 } nncCrSpvpcDstCfgBillingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Billing Configuration for the destination endpoint." DEFVAL { disabled } ::= { nncCrSpvpcDstCfgTableEntry 3 } nncCrSpvpcDstCfgLocRerouteConfig OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- Disabled enabledUniSide(2), -- Enabled UNI side enabledNniSide(3) -- Enabled NNI side } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for either the UNI side or the NNI side, or disabled." DEFVAL { disabled } ::= { nncCrSpvpcDstCfgTableEntry 4 } nncCrSpvpcDstCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWait', information for a row is cached in memory; when RowStatus is set to 'createAndGo' or 'active', it indicates that all information is to be written to permanent storage, and the SPVC to be enabled (AdminStatus must also be set to 'enabled'). When querying the object, 'active' indicates a configured SPVC with its AdminStatus enabled, while a status of 'notInService' indicates either a disabled AdminStatus or an inability to connect the SPVC. If a query returns 'notInService', use the CallStatus object to further determine the state of the SPVC. If the value 'notReady' is returned, it indicates that the SNMP agent is awaiting further information before activating the connection. When deleting a connection, use this object with the value 'destroy'" ::= { nncCrSpvpcDstCfgTableEntry 5 } --------------------------------------------------------------------------- -- Table Definition -- -- nncCrSpvccTable -- This table contains all information used to manage Cell Relay SPVCCs -- (Soft Permanent Virtual Channel Connections --------------------------------------------------------------------------- nncCrSpvccTable OBJECT-TYPE SYNTAX SEQUENCE OF NncCrSpvccTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "nncCrSpvccTable contains all the objects sent to a source endpoint that are used to create, modify, delete and query Cell Relay SPVC connections." ::= { nncExtSpvcObjects 3 } nncCrSpvccTableEntry OBJECT-TYPE SYNTAX NncCrSpvccTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncCrSpvccTable. It contains the objects required to manage CR SPVCs." INDEX {ifIndex, atmVclVpi, atmVclVci} ::= { nncCrSpvccTable 1 } NncCrSpvccTableEntry ::= SEQUENCE{ nncCrSpvccServiceCategory INTEGER, nncCrSpvccTargEpAddr AtmFormatDisplay, nncCrSpvccTargVpi INTEGER, nncCrSpvccTargVci INTEGER, nncCrSpvccTargDlci INTEGER, nncCrSpvccTargCeNumber INTEGER, nncCrSpvccTargEpType INTEGER, nncCrSpvccAdminStatus INTEGER, nncCrSpvccPriority INTEGER, nncCrSpvccMaxAdminWeight Integer32, nncCrSpvccOperation INTEGER, nncCrSpvccCallStatus INTEGER, nncCrSpvccLocRerouteConfig INTEGER, nncCrSpvccFwdAbrDynTrfcIcr INTEGER, nncCrSpvccFwdAbrDynTrfcRif INTEGER, nncCrSpvccFwdAbrDynTrfcRdf INTEGER, nncCrSpvccBwdAbrDynTrfcIcr INTEGER, nncCrSpvccBwdAbrDynTrfcRif INTEGER, nncCrSpvccBwdAbrDynTrfcRdf INTEGER, nncCrSpvccSrcBillingFlag INTEGER, nncCrSpvccFwdTmTrafficDescriptor INTEGER, nncCrSpvccFwdTmPolicingOption INTEGER, nncCrSpvccFwdTmBucketOneRate INTEGER, nncCrSpvccFwdTmBucketOneCdvt INTEGER, nncCrSpvccFwdTmBucketTwoRate INTEGER, nncCrSpvccFwdTmBucketTwoMbs INTEGER, nncCrSpvccFwdTmCdv INTEGER, nncCrSpvccFwdTmClr INTEGER, nncCrSpvccFwdTmFrameDiscard INTEGER, nncCrSpvccBwdTmTrafficDescriptor INTEGER, nncCrSpvccBwdTmPolicingOption INTEGER, nncCrSpvccBwdTmBucketOneRate INTEGER, nncCrSpvccBwdTmBucketOneCdvt INTEGER, nncCrSpvccBwdTmBucketTwoRate INTEGER, nncCrSpvccBwdTmBucketTwoMbs INTEGER, nncCrSpvccBwdTmCdv INTEGER, nncCrSpvccBwdTmClr INTEGER, nncCrSpvccBwdTmFrameDiscard INTEGER, nncCrSpvccFrBwdTmAr INTEGER, nncCrSpvccFrBwdTmCir INTEGER, nncCrSpvccFrBwdTmBc INTEGER, nncCrSpvccFrBwdTmBe INTEGER, nncCrSpvccFrBwdTmIwf INTEGER, nncCrSpvccFrBwdTmPo INTEGER, nncCrSpvccFrBwdTmPacing INTEGER, nncCrSpvccFrBwdTmPtclMapping INTEGER, nncCrSpvccFrBwdTmClpMapping INTEGER, nncCrSpvccFrBwdTmDeMapping INTEGER, nncCrSpvccFrBwdTmEfciMapping INTEGER, nncCrSpvccFrBwdTmPvcMgntProfile INTEGER, nncCrSpvccFrBwdTmSIWProfile INTEGER, nncCrSpvccCreator INTEGER, nncCrSpvccRowStatus RowStatus } nncCrSpvccServiceCategory OBJECT-TYPE SYNTAX INTEGER { cbr(1), nrtvbr(2), abr(3), ubr(4), rtvbr(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the traffic service category. This object is dependent on the value specified in nncCrSpvccTrafficDescriptor" DEFVAL { nrtvbr } ::= { nncCrSpvccTableEntry 1 } nncCrSpvccTargEpAddr OBJECT-TYPE SYNTAX AtmFormatDisplay MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the AESA address for the target endpoint. The mapping scheme is as follows: Byte\Bit 8 7 6 5 4 3 2 1 ------------------------------------------------------------------------ 1-13 byte | 13-byte Internal Subscriber Prefix | ------------------------------------------------------------------------ 14th byte | I/G | U/L | OUI(most significant 6 bits) | ------------------------------------------------------------------------ 15th byte | OUI(2nd most significant 8 bits | ------------------------------------------------------------------------ 16th byte | OUI(3rd most significant 8 bits | ------------------------------------------------------------------------ 17th byte | Shelf/Slot(1st most significant 8 bits | ------------------------------------------------------------------------ 18th byte | Shelf/Slot(2nd most significant 8 bits | ------------------------------------------------------------------------ 19th byte |Flag0| Port | ------------------------------------------------------------------------ 20th byte | 0 | ------------------------------------------------------------------------ " ::= { nncCrSpvccTableEntry 2 } nncCrSpvccTargVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the virtual path identifier (VPI) value for the target endpoint. Range: 0 - 4095" ::= { nncCrSpvccTableEntry 3 } nncCrSpvccTargVci OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the virtual channel identifier (VCI) value for the target endpoint. Range: 1 - 65535" ::= { nncCrSpvccTableEntry 4 } nncCrSpvccTargDlci OBJECT-TYPE SYNTAX INTEGER (16..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the data link connection identifier for a frame relay endpoint. This number is used to identify the target endpoint, and has only local significance to the specified link. Range: 16 - 1023" ::= { nncCrSpvccTableEntry 5 } nncCrSpvccTargCeNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains circuit number, channel group number or both for the Circuit Emulation endpoint. Used in CR to CE connections when nncCrSpvccTargEpType is configured as circuitEmulation(3). For CE connections on unchannelized DS3_CCE card, it's the circuit number 1-28 for UDT circuit number For CE connections on unchannelized E3_CCE card, it's the circuit number 1-16 for UDT circuit number For CE connections on E1/T1 CES, it's channel group number. 0 for UDT mode, both T1 and E1 1-31 for E1 in SDT mode 1-24 for T1 in SDT mode For CE connections on channelized DS3_CCE-2 card, it's circuit number and channel group number combined in the upper and lower byte. circuitNum (bits 9-16, = 1 to 28 for channelized DS3, = 0 for unstructured DS3) channelGroupNum (bits 1-8, = 1 to 24 for SDT mode, = 0 for UDT Mode) For CE connections on channelized E3_CCE-2, it's circuit number and channel group number combined in the upper and lower byte. circuitNum (bits 9-16, = 1 to 16) channelGroupNum (bits 1-8, = 1 to 31 for SDT mode, = 0 for UDT Mode) Example: Circuit Number = 7, Channel Group = 3 : nncCrSpvccTargCeNumber = (Circuit Number * 256) + Channel Group = 1795 SPVCs across service types other than circuit emulation do not require this object." DEFVAL { 1 } ::= { nncCrSpvccTableEntry 6 } nncCrSpvccTargEpType OBJECT-TYPE SYNTAX INTEGER { cellRelay(1), frameRelay(2), circuitEmulation(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a target endpoint as one of the following types: cellRelay (1) frameRelay (2) circuitEmulation (3) " DEFVAL { cellRelay } ::= { nncCrSpvccTableEntry 7 } nncCrSpvccAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabled, the SPVC is connected when possible. Use nncCrSpvccAdminStatus to determine if the connection is successful." ::= { nncCrSpvccTableEntry 8 } nncCrSpvccPriority OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the priority for a SPVC connection request. It ranges between 1-16, with the following values: Best Priority = 1 Default Priority = 3 Worst Priority = 16" DEFVAL { 3 } ::= { nncCrSpvccTableEntry 9 } nncCrSpvccMaxAdminWeight OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set a cost threshold for an SPVC connection. If the total cost of all VPCs exceeds this weight value for a given path, this SPVC will choose an alternative path or give up. Infinite = -1 Min Admin Weight = 0 Max Admin Weight = 2147483647" DEFVAL { -1 } ::= { nncCrSpvccTableEntry 10 } nncCrSpvccOperation OBJECT-TYPE SYNTAX INTEGER { reRouteDualEp(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to request a reroute operation. Querying this object will not provide any useful information." ::= { nncCrSpvccTableEntry 11 } nncCrSpvccCallStatus OBJECT-TYPE SYNTAX INTEGER { connected(2), waitingForResources(4), readyToConnect(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object is used to query the state of a particular SPVC. SPVCs that are connected and operational will return a value of 'connected', while those that are incomplete or otherwise unable to be connected will return 'waitingForResources'. SPVCs that are configured but not yet connected will contain a value of 'readyForConnect'." ::= { nncCrSpvccTableEntry 12 } nncCrSpvccLocRerouteConfig OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- Disabled enabledUniSide(2), -- Enabled UNI side enabledNniSide(3) -- Enabled NNI side } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for either the UNI side or the NNI side, or disabled." DEFVAL { disabled } ::= { nncCrSpvccTableEntry 13 } nncCrSpvccFwdAbrDynTrfcIcr OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR dynamic traffic descriptor's Initial Cell Rate for the forward direction. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvccTableEntry 14 } nncCrSpvccFwdAbrDynTrfcRif OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9" DEFVAL { 9 } ::= { nncCrSpvccTableEntry 15 } nncCrSpvccFwdAbrDynTrfcRdf OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Decrease Factor descriptor for the forward direction. Value is expressed as the -power of 2 Range: 0 - 9" DEFVAL { 9 } ::= { nncCrSpvccTableEntry 16 } nncCrSpvccBwdAbrDynTrfcIcr OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR dynamic traffic descriptor's Initial Cell Rate for the destination endpoint. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvccTableEntry 17 } nncCrSpvccBwdAbrDynTrfcRif OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Increase Factor for the backward direction. Value is expressed as the -power of 2. Range: 0 - 9" DEFVAL { 9 } ::= { nncCrSpvccTableEntry 18 } nncCrSpvccBwdAbrDynTrfcRdf OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Decrease Factor descriptor for the backward direction. Value is expressed as the -power of 2 Range: 0 - 9" DEFVAL { 9 } ::= { nncCrSpvccTableEntry 19 } nncCrSpvccSrcBillingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Billing Configuration for the source endpoint" DEFVAL { disabled } ::= { nncCrSpvccTableEntry 20 } -- forward traffic descriptors nncCrSpvccFwdTmTrafficDescriptor OBJECT-TYPE SYNTAX INTEGER { tagAll(1), p0Plus1(2), p0Plus1SlashS0Plus1(3), p0Plus1SlashS0(4), p0Plus1SlashM0Plus1(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the traffic descriptor for the SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1 (2) (CBR only) P_0+1/S_0+1 (3) (NRT/RT-VBR only) P_0+1/S_0 (4) (NRT/RT-VBR only) P_0+1/M_0+1 (5) (ABR and UBR only)" DEFVAL { p0Plus1SlashS0Plus1 } ::= { nncCrSpvccTableEntry 21 } nncCrSpvccFwdTmPolicingOption OBJECT-TYPE SYNTAX INTEGER { disabled(1), tag(2), discard(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing Option for an SPVCC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor" DEFVAL { disabled } ::= { nncCrSpvccTableEntry 22 } nncCrSpvccFwdTmBucketOneRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cells are 'excess'. Measured in Kb/s. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvccTableEntry 23 } nncCrSpvccFwdTmBucketOneCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 500 } ::= { nncCrSpvccTableEntry 24 } nncCrSpvccFwdTmBucketTwoRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for VBR traffic, and the minimum information rate for ABR/UBR traffic. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvccTableEntry 25 } nncCrSpvccFwdTmBucketTwoMbs OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells" DEFVAL { 32 } ::= { nncCrSpvccTableEntry 26 } nncCrSpvccFwdTmCdv OBJECT-TYPE SYNTAX INTEGER (250..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This value is to set the cell delay variation (CDV) between two endpoints to support the rt-VBR service category. Range: 250-10000 microseconds" DEFVAL { 250 } ::= { nncCrSpvccTableEntry 27 } nncCrSpvccFwdTmClr OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The object is to set the cell loss ratio (CLR) between two SPVC endpoints when using the nrt-VBR service category. Value set as 1.0e-#" DEFVAL { 7 } ::= { nncCrSpvccTableEntry 28 } nncCrSpvccFwdTmFrameDiscard OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-type in the payload type field of the ATM cell header." DEFVAL { disabled } ::= { nncCrSpvccTableEntry 29 } -- backward traffic descriptors nncCrSpvccBwdTmTrafficDescriptor OBJECT-TYPE SYNTAX INTEGER { tagAll(1), p0Plus1(2), p0Plus1SlashS0Plus1(3), p0Plus1SlashS0(4), p0Plus1SlashM0Plus1(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the traffic descriptor for the SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1 (2) (CBR only) P_0+1/S_0+1 (3) (NRT/RT-VBR only) P_0+1/S_0 (4) (NRT/RT-VBR only) P_0+1/M_0+1 (5) (ABR and UBR only)" DEFVAL { p0Plus1SlashS0Plus1 } ::= { nncCrSpvccTableEntry 30 } nncCrSpvccBwdTmPolicingOption OBJECT-TYPE SYNTAX INTEGER { disabled(1), tag(2), discard(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing Option for an SPVCC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor" DEFVAL { disabled } ::= { nncCrSpvccTableEntry 31 } nncCrSpvccBwdTmBucketOneRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cells are 'excess'. Measured in Kb/s. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvccTableEntry 32 } nncCrSpvccBwdTmBucketOneCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 500 } ::= { nncCrSpvccTableEntry 33 } nncCrSpvccBwdTmBucketTwoRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for VBR traffic, and the minimum information rate for ABR/UBR traffic. Range: 0 - 2488320 Kb/s" DEFVAL { 1000 } ::= { nncCrSpvccTableEntry 34 } nncCrSpvccBwdTmBucketTwoMbs OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells" DEFVAL { 32 } ::= { nncCrSpvccTableEntry 35 } nncCrSpvccBwdTmCdv OBJECT-TYPE SYNTAX INTEGER (250..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This value is to set the cell delay variation (CDV) between two endpoints to support the rt-VBR service category. Range: 250-10000 microseconds" DEFVAL { 250 } ::= { nncCrSpvccTableEntry 36 } nncCrSpvccBwdTmClr OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The object is to set the cell loss ratio (CLR) between two SPVC endpoints when using the nrt-VBR service category. Value set as 1.0e-#" DEFVAL { 7 } ::= { nncCrSpvccTableEntry 37 } nncCrSpvccBwdTmFrameDiscard OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-type in the payload type field of the ATM cell header." DEFVAL { disabled } ::= { nncCrSpvccTableEntry 38 } -- FR backward traffic descriptors (used only if the destination endpoint is FR) nncCrSpvccFrBwdTmAr OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the Access Rate, in Kb/s." DEFVAL { 64 } ::= { nncCrSpvccTableEntry 39 } nncCrSpvccFrBwdTmCir OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "The committed Information Rate, in Kb/s." DEFVAL { 64 } ::= { nncCrSpvccTableEntry 40 } nncCrSpvccFrBwdTmBc OBJECT-TYPE SYNTAX INTEGER (0..2097151) MAX-ACCESS read-create STATUS current DESCRIPTION "The Committed Burst Size, in Kb." DEFVAL { 64 } ::= { nncCrSpvccTableEntry 41 } nncCrSpvccFrBwdTmBe OBJECT-TYPE SYNTAX INTEGER (0..2097151) MAX-ACCESS read-create STATUS current DESCRIPTION "The Excess Burst Size, in Kb." DEFVAL { 64 } ::= { nncCrSpvccTableEntry 42 } nncCrSpvccFrBwdTmIwf OBJECT-TYPE SYNTAX INTEGER { none(0), networkInterworking(2), serviceInterworking(3), fFwdInterworking(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Interworking Function. Values: none (None (FR Switching) = 0) networkInterworking (Network Interworking = 2) serviceInterworking (Service Interworking = 3) FFwd Interworking (FFwd Interworking = 4)" DEFVAL { networkInterworking } ::= { nncCrSpvccTableEntry 43 } nncCrSpvccFrBwdTmPo OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing" DEFVAL { enabled } ::= { nncCrSpvccTableEntry 44 } nncCrSpvccFrBwdTmPacing OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Pacing" DEFVAL { disabled } ::= { nncCrSpvccTableEntry 45 } nncCrSpvccFrBwdTmPtclMapping OBJECT-TYPE SYNTAX INTEGER { transparent(0), translated(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Protocol Mapping for Service Interworking SPVCs. If Translated Service Interworking is selected, the a profile must be set using the attribute nncFrSpvcTmSIWProfile. Values: transparent (0), translated (1) (see also nncFrSpvcTmSIWProfile)" DEFVAL { transparent } ::= { nncCrSpvccTableEntry 46 } nncCrSpvccFrBwdTmClpMapping OBJECT-TYPE SYNTAX INTEGER { cLPEqualsDE(0), cLPEquals0(1), cLPEquals1(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Cell Loss Priority Mapping. Values: cLPEqualsDE (CLP = DE, 0) cLPEquals0 (CLP = 0, 1 ) cLPEquals1 (CLP = 1, 2 )" DEFVAL { cLPEquals1 } ::= { nncCrSpvccTableEntry 47 } nncCrSpvccFrBwdTmDeMapping OBJECT-TYPE SYNTAX INTEGER { dEEqualsCLP(0), dESSCSor0(1), dEEquals1(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Discard Eligibility Mapping Values: dEEqualsCLP (DE = CLP, 0) dESSCSor0 (Network Interworking: DE=FR_SSCS Service Interworking: DE=0, 1) dEEquals1 (Service Interworking: DE = 1, 2) Only the first two values are valid when using Network Interworking." DEFVAL { dEEqualsCLP } ::= { nncCrSpvccTableEntry 48 } nncCrSpvccFrBwdTmEfciMapping OBJECT-TYPE SYNTAX INTEGER { eFCIEqualsFECN(0), eFCIEquals0(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Explicit Forward Congestion Indication Mapping (Applies only to Service Interworking (IWF3), FR to ATM) Values: eFCIEqualsFECN (EFCI = FECN, 0) eFCIEquals0 (EFCI = 0, 1)" DEFVAL { eFCIEqualsFECN } ::= { nncCrSpvccTableEntry 49 } nncCrSpvccFrBwdTmPvcMgntProfile OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the PVC Management Profile. When enabled, LMI is enabled on the network-side of the connection. Used only with FR-CR network interworking selected." DEFVAL { enabled } ::= { nncCrSpvccTableEntry 50 } nncCrSpvccFrBwdTmSIWProfile OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The FR-CR profile index for service interworking connections. This attribute is used to define the translation profile to use when a FR to CR SPVC is configured for Translated Service Interworking (using the attributes nncFrSpvcTmIwf and nncFrSpvcTmPtclMapping). If the profile selected isn't defined on the remote node then the connection will be rejected. Range: 1 = 16." DEFVAL { 1 } ::= { nncCrSpvccTableEntry 51 } nncCrSpvccCreator OBJECT-TYPE SYNTAX INTEGER { unknown(0), -- Creator is unknown nmti(1), -- Creator is NMTI nm5620(2), -- Creator is 5620 snmp(9) -- Creator is SNMP } MAX-ACCESS read-only STATUS current DESCRIPTION "The object retrieves the creator of a SPVC connection." ::= { nncCrSpvccTableEntry 52 } nncCrSpvccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWait', information for a row is cached in memory; when RowStatus is set to 'createAndGo' or 'active', it indicates that all information is to be written to permanent storage, and the SPVC to be enabled (AdminStatus must also be set to 'enabled'). When querying the object, 'active' indicates a configured SPVC with its AdminStatus enabled, while a status of 'notInService' indicates either a disabled AdminStatus or an inability to connect the SPVC. If a query returns 'notInService', use the CallStatus object to further determine the state of the SPVC. If the value 'notReady' is returned, it indicates that the SNMP agent is awaiting further information before activating the connection. When deleting a connection, use this object with the value 'destroy'" ::= {nncCrSpvccTableEntry 53 } --------------------------------------------------------------------------- -- Table Definition -- -- The nncCrSpvccDstCfgTable -- This table contains all information used to configure the destination -- endpoint of an SPVC. --------------------------------------------------------------------------- nncCrSpvccDstCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF NncCrSpvccDstCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the nncCrSpvccDstCfg table contains common objects used to configure, delete, modify and query the destination end point of an SPVC across different Alcatel CID platforms." ::= { nncExtSpvcObjects 4 } nncCrSpvccDstCfgTableEntry OBJECT-TYPE SYNTAX NncCrSpvccDstCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncCrSpvccDstCfgTable." INDEX {ifIndex, atmVclVpi, atmVclVci} ::= { nncCrSpvccDstCfgTable 1 } NncCrSpvccDstCfgTableEntry ::= SEQUENCE{ nncCrSpvccDstCfgCdvt INTEGER, nncCrSpvccDstCfgPolicing INTEGER, nncCrSpvccDstCfgBillingFlag INTEGER, nncCrSpvccDstCfgFrVsvdCongestionControl INTEGER, nncCrSpvccDstCfgLocRerouteConfig INTEGER, nncCrSpvccDstCfgRowStatus RowStatus } nncCrSpvccDstCfgCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 500 } ::= { nncCrSpvccDstCfgTableEntry 1 } nncCrSpvccDstCfgPolicing OBJECT-TYPE SYNTAX INTEGER { nullPolicing(0), disabled(1), tag(2), discard(3), useSignalled(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "CR Policing" DEFVAL { disabled } ::= { nncCrSpvccDstCfgTableEntry 2 } nncCrSpvccDstCfgBillingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Billing Configuration for the destination endpoint" DEFVAL { disabled } ::= { nncCrSpvccDstCfgTableEntry 3 } -- VS/VD, only used if the source endpoint is CR nncCrSpvccDstCfgFrVsvdCongestionControl OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Congestion Control for VS/VD endpoints, also known as Closed Loop Congestion Control (CLCC)." DEFVAL { disabled } ::= { nncCrSpvccDstCfgTableEntry 4 } nncCrSpvccDstCfgLocRerouteConfig OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- Disabled enabledUniSide(2), -- Enabled UNI side enabledNniSide(3) -- Enabled NNI side } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for either the UNI side or the NNI side, or disabled." DEFVAL { disabled } ::= { nncCrSpvccDstCfgTableEntry 5 } nncCrSpvccDstCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWait', information for a row is cached in memory; when RowStatus is set to 'createAndGo' or 'active', it indicates that all information is to be written to permanent storage, and the SPVC to be enabled (AdminStatus must also be set to 'enabled'). When querying the object, 'active' indicates a configured SPVC with its AdminStatus enabled, while a status of 'notInService' indicates either a disabled AdminStatus or an inability to connect the SPVC. If a query returns 'notInService', use the CallStatus object to further determine the state of the SPVC. If the value 'notReady' is returned, it indicates that the SNMP agent is awaiting further information before activating the connection. When deleting a connection, use this object with the value 'destroy'" ::= { nncCrSpvccDstCfgTableEntry 6 } --------------------------------------------------------------------------- -- Table Definition -- -- nncFrSpvcTable -- This table contains all information used to manage Frame Relay SPVCCs --------------------------------------------------------------------------- nncFrSpvcTable OBJECT-TYPE SYNTAX SEQUENCE OF NncFrSpvcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "nncFrSpvcTable contains all the objects sent to a source endpoint that are used to create, modify, delete and query FR SPVCCs." ::= { nncExtSpvcObjects 5 } nncFrSpvcTableEntry OBJECT-TYPE SYNTAX NncFrSpvcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncFrSpvcTable." INDEX {ifIndex, nncFrSpvcSrcDlci} ::= { nncFrSpvcTable 1 } NncFrSpvcTableEntry ::= SEQUENCE{ nncFrSpvcSrcDlci INTEGER, nncFrSpvcTargEpAddr AtmFormatDisplay, nncFrSpvcTargDlci INTEGER, nncFrSpvcTargVpi INTEGER, nncFrSpvcTargVci INTEGER, nncFrSpvcTargEpType INTEGER, nncFrSpvcAdminStatus INTEGER, nncFrSpvcPriority INTEGER, nncFrSpvcMaxAdminWeight Integer32, nncFrSpvcOperation INTEGER, nncFrSpvcCallStatus INTEGER, nncFrSpvcLocRerouteConfig INTEGER, nncFrSpvcSrcBillingFlag INTEGER, nncFrSpvcFrPriority INTEGER, nncFrSpvcFrVsvdCongestionControl INTEGER, nncFrSpvcFwdFrMir INTEGER, nncFrSpvcFwdTmAr INTEGER, nncFrSpvcFwdTmCir INTEGER, nncFrSpvcFwdTmBc INTEGER, nncFrSpvcFwdTmBe INTEGER, nncFrSpvcTmIwf INTEGER, nncFrSpvcFwdTmPo INTEGER, nncFrSpvcFwdTmPacing INTEGER, nncFrSpvcTmPtclMapping INTEGER, nncFrSpvcTmClpMapping INTEGER, nncFrSpvcTmDeMapping INTEGER, nncFrSpvcTmEfciMapping INTEGER, nncFrSpvcTmPvcMgntProfile INTEGER, nncFrSpvcTmSIWProfile INTEGER, nncFrSpvcTmRemapDlci INTEGER, nncFrSpvcBwdFrMir INTEGER, nncFrSpvcBwdTmAr INTEGER, nncFrSpvcBwdTmCir INTEGER, nncFrSpvcBwdTmBc INTEGER, nncFrSpvcBwdTmBe INTEGER, nncFrSpvcBwdTmPo INTEGER, nncFrSpvcBwdTmPacing INTEGER, nncFrSpvcCrTmServiceCategory INTEGER, nncFrSpvcCrBwdTmTrafficDescriptor INTEGER, nncFrSpvcCrBwdTmPolicingOption INTEGER, nncFrSpvcCrBwdTmBucketOneRate INTEGER, nncFrSpvcCrBwdTmBucketOneCdvt INTEGER, nncFrSpvcCrBwdTmBucketTwoRate INTEGER, nncFrSpvcCrBwdTmBucketTwoMbs INTEGER, nncFrSpvcCrBwdTmCdv INTEGER, nncFrSpvcCrBwdTmClr INTEGER, nncFrSpvcCrBwdTmFrameDiscard INTEGER, nncFrSpvcCreator INTEGER, nncFrSpvcRowStatus RowStatus } nncFrSpvcSrcDlci OBJECT-TYPE SYNTAX INTEGER (16..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the data link connection identifier for a frame relay endpoint. This number is used to identify the source endpoint, and has only local significance to the specified link. Range: 16 - 1023" DEFVAL { 17 } ::= { nncFrSpvcTableEntry 1 } nncFrSpvcTargEpAddr OBJECT-TYPE SYNTAX AtmFormatDisplay MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the target endpoint's 20-byte ATM End System Address (AESA) proposed by ATM Forum. An endpoint address is created by appending the switch-wide 13-byte Internal Switch Subscriber Address Prefix with a 6-byte End Station Identifier (ESI) followed by a selector byte. The ESI is in IEEE MAC address format and the exact form depends upon the destination endpoint and the SPVC commissioning method. The mapping scheme is as follows: Byte\Bit 8 7 6 5 4 3 2 1 ------------------------------------------------------------------------ 1-13 byte | 13-byte Internal Subscriber Prefix | ------------------------------------------------------------------------ 14th byte | I/G | U/L | OUI(most significant 6 bits) | ------------------------------------------------------------------------ 15th byte | OUI(2nd most significant 8 bits | ------------------------------------------------------------------------ 16th byte | OUI(3rd most significant 8 bits | ------------------------------------------------------------------------ 17th byte | Shelf/Slot(1st most significant 8 bits | ------------------------------------------------------------------------ 18th byte | Shelf/Slot(2nd most significant 8 bits | ------------------------------------------------------------------------ 19th byte |Flag1| Port | Circuit | ------------------------------------------------------------------------ 20th byte |Circuit(continued) | Stream | ------------------------------------------------------------------------ " ::= { nncFrSpvcTableEntry 2 } nncFrSpvcTargDlci OBJECT-TYPE SYNTAX INTEGER (16..1023) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the data link connection identifier for a frame relay endpoint. This number is used to identify the target endpoint, and has only local significance to the specified link. Range: 16 - 1023" DEFVAL { 17 } ::= { nncFrSpvcTableEntry 3 } nncFrSpvcTargVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the virtual path identifier (VPI) value for the Cell Relay based target endpoint. Range: 0 - 4095" ::= { nncFrSpvcTableEntry 4 } nncFrSpvcTargVci OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the virtual channel identifier (VCI) value for the cell-relay based target endpoint. Range: 1 - 65535" ::= { nncFrSpvcTableEntry 5 } nncFrSpvcTargEpType OBJECT-TYPE SYNTAX INTEGER { cellRelay(1), frameRelay(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a target endpoint as one of the following types: cellRelay (1) frameRelay (2) " DEFVAL { frameRelay } ::= { nncFrSpvcTableEntry 6 } nncFrSpvcAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabled, the SPVC is connected when possible. Use nncFrSpvcAdminStatus to determine if the connection is successful." ::= { nncFrSpvcTableEntry 7 } nncFrSpvcPriority OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the priority for a SPVC connection request. It ranges between 1-16, with the following values: Best Priority = 1 Default Priority = 3 Worst Priority = 16" DEFVAL { 3 } ::= { nncFrSpvcTableEntry 8 } nncFrSpvcMaxAdminWeight OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set a cost threshold for an SPVC connection. If the total cost of all VPCs exceeds this weight value for a given path, this SPVC will choose an alternative path or give up. Infinite = -1 Min Admin Weight = 0 Max Admin Weight = 2147483647" DEFVAL { -1 } ::= { nncFrSpvcTableEntry 9 } nncFrSpvcOperation OBJECT-TYPE SYNTAX INTEGER { reRouteDualEp(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to request a reroute operation. Querying this object will not provide any useful information." ::= { nncFrSpvcTableEntry 10 } nncFrSpvcCallStatus OBJECT-TYPE SYNTAX INTEGER { connected(2), waitingForResources(4), readyToConnect(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object is used to query the state of a particular SPVC. SPVCs that are connected and operational will return a value of 'connected', while those that are incomplete or otherwise unable to be connected will return 'waitingForResources'. SPVCs that are configured but not yet connected will contain a value of 'readyForConnect'." ::= { nncFrSpvcTableEntry 11 } nncFrSpvcLocRerouteConfig OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- Disabled enabledUniSide(2), -- Enabled UNI side enabledNniSide(3) -- Enabled NNI side } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for either the UNI side or the NNI side, or disabled." DEFVAL { disabled } ::= { nncFrSpvcTableEntry 12 } nncFrSpvcSrcBillingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Billing Configuration for the source endpoint." DEFVAL { disabled } ::= { nncFrSpvcTableEntry 13 } nncFrSpvcFrPriority OBJECT-TYPE SYNTAX INTEGER { bestEffort(1), committedThroughput(2), lowLatency(3), realTime(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Frame Relay Priority." DEFVAL { bestEffort } ::= { nncFrSpvcTableEntry 14 } nncFrSpvcFrVsvdCongestionControl OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Congestion Control for VS/VD endpoints, also known as Closed Loop Congestion Control (CLCC)." DEFVAL { disabled } ::= { nncFrSpvcTableEntry 15 } nncFrSpvcFwdFrMir OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "The FR Src->Dst Minimum Information Rate, used to set the minimum rate on a CLCC FR-FR SPVC connection. If nncFrSpvcFrVsvdCongestionControl is not enabled, this attribute has no effect. Range: 0 - 44210 Kb/s" DEFVAL { 72 } ::= { nncFrSpvcTableEntry 16 } -- forward traffic descriptors nncFrSpvcFwdTmAr OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the Access Rate, in Kb/s" DEFVAL { 64 } ::= { nncFrSpvcTableEntry 17 } nncFrSpvcFwdTmCir OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "The committed Information Rate, in Kb/s" DEFVAL { 64 } ::= { nncFrSpvcTableEntry 18 } nncFrSpvcFwdTmBc OBJECT-TYPE SYNTAX INTEGER (0..2097151) MAX-ACCESS read-create STATUS current DESCRIPTION "The Committed Burst Size, in Kb." DEFVAL { 64 } ::= { nncFrSpvcTableEntry 19 } nncFrSpvcFwdTmBe OBJECT-TYPE SYNTAX INTEGER (0..2097151) MAX-ACCESS read-create STATUS current DESCRIPTION "Excess Burst Size, Kb." DEFVAL { 64 } ::= { nncFrSpvcTableEntry 20 } nncFrSpvcTmIwf OBJECT-TYPE SYNTAX INTEGER { none(0), networkInterworking(2), serviceInterworking(3), fFwdInterworking(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Interworking Function. Values: none (None (FR Switching) = 0) networkInterworking (Network Interworking = 2) serviceInterworking (Service Interworking = 3) FFwd Interworking (FFwd Interworking = 4)" DEFVAL { networkInterworking } ::= { nncFrSpvcTableEntry 21 } nncFrSpvcFwdTmPo OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing. " DEFVAL { enabled } ::= { nncFrSpvcTableEntry 22 } nncFrSpvcFwdTmPacing OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Pacing." DEFVAL { disabled } ::= { nncFrSpvcTableEntry 23 } nncFrSpvcTmPtclMapping OBJECT-TYPE SYNTAX INTEGER { transparent(0), translated(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Protocol Mapping for Service Interworking SPVCs. If Translated Service Interworking is selected, the a profile must be set using the attribute nncFrSpvcTmSIWProfile. Values: transparent (0), translated (1) (see also nncFrSpvcTmSIWProfile)" DEFVAL { transparent } ::= { nncFrSpvcTableEntry 24 } nncFrSpvcTmClpMapping OBJECT-TYPE SYNTAX INTEGER { cLPEqualsDE(0), cLPEquals0(1), cLPEquals1(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Cell Loss Priority Mapping, for use in FR-CR interworking SPVCs. Values: cLPEqualsDE (CLP = DE, 0) cLPEquals0 (CLP = 0, 1 ) cLPEquals1 (CLP = 1, 2 )" DEFVAL { cLPEquals1 } ::= { nncFrSpvcTableEntry 25 } nncFrSpvcTmDeMapping OBJECT-TYPE SYNTAX INTEGER { dEEqualsCLP(0), dESSCSor0(1), dEEquals1(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Discard Eligibility Mapping, for use in FR-CR interworking SPVCs. Values: dEEqualsCLP (DE = CLP, 0) dESSCSor0 (Network Interworking: DE=FR_SSCS Service Interworking: DE=0, 1) dEEquals1 (Service Interworking: DE = 1, 2) Only the first two values are valid when using Network Interworking." DEFVAL { dEEqualsCLP } ::= { nncFrSpvcTableEntry 26 } nncFrSpvcTmEfciMapping OBJECT-TYPE SYNTAX INTEGER { eFCIEqualsFECN(0), eFCIEquals0(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Explicit Forward Congestion Indication Mapping (Applies only to Service Interworking (IWF3), FR to ATM) Values: eFCIEqualsFECN (EFCI = FECN, 0) eFCIEquals0 (EFCI = 0, 1)" DEFVAL { eFCIEqualsFECN } ::= { nncFrSpvcTableEntry 27 } nncFrSpvcTmPvcMgntProfile OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the PVC Management Profile. When enabled, LMI is enabled on the network-side of the connection. Used only with FR-CR network interworking selected." DEFVAL { enabled } ::= { nncFrSpvcTableEntry 28 } nncFrSpvcTmSIWProfile OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The FR-CR profile index for service interworking connections. This attribute is used to define the translation profile to use when a FR to CR SPVC is configured for Translated Service Interworking (using the attributes nncFrSpvcTmIwf and nncFrSpvcTmPtclMapping). If the profile selected isn't defined on the remote node then the connection will be rejected. Range: 1 - 16." DEFVAL { 1 } ::= { nncFrSpvcTableEntry 29 } nncFrSpvcTmRemapDlci OBJECT-TYPE SYNTAX INTEGER (16..1023) MAX-ACCESS read-create STATUS current DESCRIPTION "The source end-point Data Link Connection Identifier for many-to-one Network Interworking (IWF2) connections." DEFVAL { 17 } ::= { nncFrSpvcTableEntry 30 } -- backward traffic descriptors nncFrSpvcBwdFrMir OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "The FR Dst->Src Minimum Information Rate, used on CLCC-enabled connections. Range: 0 - 44210 Kb/s" DEFVAL { 72 } ::= { nncFrSpvcTableEntry 31 } nncFrSpvcBwdTmAr OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the Access Rate, in Kb/s" DEFVAL { 64 } ::= { nncFrSpvcTableEntry 32 } nncFrSpvcBwdTmCir OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "The committed Information Rate, in Kb/s" DEFVAL { 64 } ::= { nncFrSpvcTableEntry 33 } nncFrSpvcBwdTmBc OBJECT-TYPE SYNTAX INTEGER (0..2097151) MAX-ACCESS read-create STATUS current DESCRIPTION "The Committed Burst Size, in Kb." DEFVAL { 64 } ::= { nncFrSpvcTableEntry 34 } nncFrSpvcBwdTmBe OBJECT-TYPE SYNTAX INTEGER (0..2097151) MAX-ACCESS read-create STATUS current DESCRIPTION "The Excess Burst Size, Kb." DEFVAL { 64 } ::= { nncFrSpvcTableEntry 35 } nncFrSpvcBwdTmPo OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing." DEFVAL { enabled } ::= { nncFrSpvcTableEntry 36 } nncFrSpvcBwdTmPacing OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Pacing." DEFVAL { disabled } ::= { nncFrSpvcTableEntry 37 } -- CR backward traffic descriptors (only used if the destination endpoint is CR) nncFrSpvcCrTmServiceCategory OBJECT-TYPE SYNTAX INTEGER { nrtvbr(2), abr(3), ubr(4), rtvbr(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the traffic service category for SPVC Connections. This object is dependent on the value specified in nncFrSpvcCrBwdTmTrafficDescriptor." DEFVAL { ubr } ::= { nncFrSpvcTableEntry 38 } nncFrSpvcCrBwdTmTrafficDescriptor OBJECT-TYPE SYNTAX INTEGER { tagAll(1), p0Plus1SlashS0Plus1(3), p0Plus1SlashS0(4), p0Plus1SlashM0Plus1(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the CR traffic descriptor for a FR-CR SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1/S_0+1 (3) (NRT/RT-VBR only) P_0+1/S_0 (4) (NRT/RT-VBR only) P_0+1/M_0+1 (5) (ABR and UBR only)" DEFVAL { p0Plus1SlashS0Plus1 } ::= { nncFrSpvcTableEntry 39 } nncFrSpvcCrBwdTmPolicingOption OBJECT-TYPE SYNTAX INTEGER { disabled(1), tag(2), discard(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing Option for a FR SPVC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor" DEFVAL { disabled } ::= { nncFrSpvcTableEntry 40 } nncFrSpvcCrBwdTmBucketOneRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "Used in FR - CR interworking. This object is for peak cell rate (PCR), the cell rate which the cell endpoint may never exceed. It is used to determine which cells are 'excess'. Measured in Kb/s. Range: 0 - 2488320 Kb/s" DEFVAL { 256 } ::= { nncFrSpvcTableEntry 41 } nncFrSpvcCrBwdTmBucketOneCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for the CR endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 500 } ::= { nncFrSpvcTableEntry 42 } nncFrSpvcCrBwdTmBucketTwoRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "Used in FR - CR interworking. The attribute contains the SIR_0, SIR_0+1 or MIR_0+1. This parameter holds the sustained information rate (SIR_0 or SIR_0+1) for VBR traffic, and the minimum information rate for ABR/UBR traffic. Range: 0 - 2488320 Kb/s" DEFVAL { 72 } ::= { nncFrSpvcTableEntry 43 } nncFrSpvcCrBwdTmBucketTwoMbs OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells" DEFVAL { 32 } ::= { nncFrSpvcTableEntry 44 } nncFrSpvcCrBwdTmCdv OBJECT-TYPE SYNTAX INTEGER (250..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "This value is to set the cell delay variation (CDV) at the CR endpoint. Applicable only when the rt-VBR service category is used. Range: 250-10000 microseconds" DEFVAL { 250 } ::= { nncFrSpvcTableEntry 45 } nncFrSpvcCrBwdTmClr OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The object is to set the cell loss ratio (CLR) at the CR endpoint of a FR-CR SPVC. Valid only when using the nrt-VBR service category. Value set as 1.0e-#" DEFVAL { 7 } ::= { nncFrSpvcTableEntry 46 } nncFrSpvcCrBwdTmFrameDiscard OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-type in the payload type field of the ATM cell header." DEFVAL { disabled } ::= { nncFrSpvcTableEntry 47 } nncFrSpvcCreator OBJECT-TYPE SYNTAX INTEGER { unknown(0), -- Creator is unknown nmti(1), -- Creator is NMTI nm5620(2), -- Creator is 5620 snmp(9) -- Creator is SNMP } MAX-ACCESS read-only STATUS current DESCRIPTION "The object retrieves the creator of a given SPVC connection." ::= { nncFrSpvcTableEntry 48 } nncFrSpvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWait', information for a row is cached in memory; when RowStatus is set to 'createAndGo' or 'active', it indicates that all information is to be written to permanent storage, and the SPVC to be enabled (AdminStatus must also be set to 'enabled'). When querying the object, 'active' indicates a configured SPVC with its AdminStatus enabled, while a status of 'notInService' indicates either a disabled AdminStatus or an inability to connect the SPVC. If a query returns 'notInService', use the CallStatus object to further determine the state of the SPVC. If the value 'notReady' is returned, it indicates that the SNMP agent is awaiting further information before activating the connection. When deleting a connection, use this object with the value 'destroy'" ::= {nncFrSpvcTableEntry 49 } --------------------------------------------------------------------------- -- Table Definition -- -- The nncFrSpvcDstCfgTable -- This table contains all information used to configure the destination -- endpoint of a frame-relay Spvc. -- --------------------------------------------------------------------------- nncFrSpvcDstCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF NncFrSpvcDstCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the nncFrSpvcDstCfg table contains common objects used to configure, delete, modify and query the destination end point of an SPVC across different Alcatel CID platforms." ::= { nncExtSpvcObjects 6 } nncFrSpvcDstCfgTableEntry OBJECT-TYPE SYNTAX NncFrSpvcDstCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncFrSpvcDstCfgTable." INDEX {ifIndex, nncFrSpvcDstCfgTmRemapDlci} ::= { nncFrSpvcDstCfgTable 1 } NncFrSpvcDstCfgTableEntry ::= SEQUENCE{ nncFrSpvcDstCfgTmAr INTEGER, nncFrSpvcDstCfgTmCir INTEGER, nncFrSpvcDstCfgTmBc INTEGER, nncFrSpvcDstCfgTmBe INTEGER, nncFrSpvcDstCfgTmIwf INTEGER, nncFrSpvcDstCfgTmPo INTEGER, nncFrSpvcDstCfgTmPacing INTEGER, nncFrSpvcDstCfgTmPtclMapping INTEGER, nncFrSpvcDstCfgTmClpMapping INTEGER, nncFrSpvcDstCfgTmDeMapping INTEGER, nncFrSpvcDstCfgTmEfciMapping INTEGER, nncFrSpvcDstCfgTmPvcMgntProfile INTEGER, nncFrSpvcDstCfgTmSIWProfile INTEGER, nncFrSpvcDstCfgTmRemapDlci INTEGER, nncFrSpvcDstCfgBillingFlag INTEGER, nncFrSpvcDstCfgFrPriority INTEGER, nncFrSpvcDstCfgLocRerouteConfig INTEGER, nncFrSpvcDstCfgRowStatus RowStatus } nncFrSpvcDstCfgTmAr OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the Access Rate, in Kb/s" DEFVAL { 64 } ::= { nncFrSpvcDstCfgTableEntry 1 } nncFrSpvcDstCfgTmCir OBJECT-TYPE SYNTAX INTEGER (0..44210) MAX-ACCESS read-create STATUS current DESCRIPTION "The committed Information Rate, Kb/s" DEFVAL { 64 } ::= { nncFrSpvcDstCfgTableEntry 2 } nncFrSpvcDstCfgTmBc OBJECT-TYPE SYNTAX INTEGER (0..2097151) MAX-ACCESS read-create STATUS current DESCRIPTION "The Committed Burst Size, in Kb." DEFVAL { 64 } ::= { nncFrSpvcDstCfgTableEntry 3 } nncFrSpvcDstCfgTmBe OBJECT-TYPE SYNTAX INTEGER (0..2097151) MAX-ACCESS read-create STATUS current DESCRIPTION "Excess Burst Size, in Kb." DEFVAL { 64 } ::= { nncFrSpvcDstCfgTableEntry 4 } nncFrSpvcDstCfgTmIwf OBJECT-TYPE SYNTAX INTEGER { none(0), networkInterworking(2), serviceInterworking(3), fFwdInterworking(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Interworking Function. Values: none (None (FR Switching) = 0) networkInterworking (Network Interworking = 2) serviceInterworking (Service Interworking = 3) FFwd Interworking (FFwd Interworking = 4)" DEFVAL { networkInterworking } ::= { nncFrSpvcDstCfgTableEntry 5 } nncFrSpvcDstCfgTmPo OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Policing." DEFVAL { enabled } ::= { nncFrSpvcDstCfgTableEntry 6 } nncFrSpvcDstCfgTmPacing OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Pacing." DEFVAL { disabled } ::= { nncFrSpvcDstCfgTableEntry 7 } nncFrSpvcDstCfgTmPtclMapping OBJECT-TYPE SYNTAX INTEGER { transparent(0), translated(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Protocol Mapping for Service Interworking SPVCs. If Translated Service Interworking is selected, the a profile must be set using the attribute nncFrSpvcTmPvcMgntProfile." DEFVAL { transparent } ::= { nncFrSpvcDstCfgTableEntry 8 } nncFrSpvcDstCfgTmClpMapping OBJECT-TYPE SYNTAX INTEGER { cLPEqualsDE(0), cLPEquals0(1), cLPEquals1(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Cell Loss Priority Mapping. Values: cLPEqualsDE (CLP = DE) cLPEquals0 (CLP = 0 ) cLPEquals1 (CLP = 1 )" DEFVAL { cLPEquals1 } ::= { nncFrSpvcDstCfgTableEntry 9 } nncFrSpvcDstCfgTmDeMapping OBJECT-TYPE SYNTAX INTEGER { dEEqualsCLP(0), dESSCSor0(1), dEEquals1(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Discard Eligibility Mapping Values: dEEqualsCLP (DE = CLP, 0) dESSCSor0 (Network Interworking: DE=FR_SSCS Service Interworking: DE=0, 1) dEEquals1 (Service Interworking: DE = 1, 2) Only the first two values are valid when using Network Interworking." DEFVAL { dEEqualsCLP } ::= { nncFrSpvcDstCfgTableEntry 10 } nncFrSpvcDstCfgTmEfciMapping OBJECT-TYPE SYNTAX INTEGER { eFCIEqualsFECN(0), eFCIEquals0(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Explicit Forward Congestion Indication Mapping (Applies only to Service Interworking (IWF3), FR to ATM) Values: eFCIEqualsFECN (0) eFCIEquals0 (1)" DEFVAL { eFCIEqualsFECN } ::= { nncFrSpvcDstCfgTableEntry 11 } nncFrSpvcDstCfgTmPvcMgntProfile OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1)} MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or disables the PVC Management Profile. When enabled, LMI is enabled on the network-side of the connection. Used only with FR-CR network interworking selected." DEFVAL { enabled } ::= { nncFrSpvcDstCfgTableEntry 12 } nncFrSpvcDstCfgTmSIWProfile OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The FR-CR profile index for service interworking connections. This attribute is used to define the translation profile to use when a FR to CR SPVC is configured for Translated Service Interworking (using the attribute nncFrSpvcTmPtclMapping). If the profile selected isn't defined on the remote node then the connection will be rejected. Range: 1 = 16." DEFVAL { 1 } ::= { nncFrSpvcDstCfgTableEntry 13 } nncFrSpvcDstCfgTmRemapDlci OBJECT-TYPE SYNTAX INTEGER (16..1023) MAX-ACCESS read-create STATUS current DESCRIPTION "The source end-point Data Link Connection Identifier for many-to-one Network Interworking (IWF2) connections." DEFVAL { 17 } ::= { nncFrSpvcDstCfgTableEntry 14 } nncFrSpvcDstCfgBillingFlag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Billing Configuration for the destination endpoint." DEFVAL { disabled } ::= { nncFrSpvcDstCfgTableEntry 15 } nncFrSpvcDstCfgFrPriority OBJECT-TYPE SYNTAX INTEGER { bestEffort(1), committedThroughput(2), lowLatency(3), realTime(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Frame Relay Priority." DEFVAL { bestEffort } ::= { nncFrSpvcDstCfgTableEntry 16 } nncFrSpvcDstCfgLocRerouteConfig OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- Disabled enabledUniSide(2), -- Enabled UNI side enabledNniSide(3) -- Enabled NNI side } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for either the UNI side or the NNI side, or disabled." DEFVAL { disabled } ::= { nncFrSpvcDstCfgTableEntry 17 } nncFrSpvcDstCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWait', information for a row is cached in memory; when RowStatus is set to 'createAndGo' or 'active', it indicates that all information is to be written to permanent storage, and the SPVC to be enabled (AdminStatus must also be set to 'enabled'). When querying the object, 'active' indicates a configured SPVC with its AdminStatus enabled, while a status of 'notInService' indicates either a disabled AdminStatus or an inability to connect the SPVC. If a query returns 'notInService', use the CallStatus object to further determine the state of the SPVC. If the value 'notReady' is returned, it indicates that the SNMP agent is awaiting further information before activating the connection. When deleting a connection, use this object with the value 'destroy'" ::= { nncFrSpvcDstCfgTableEntry 18 } --------------------------------------------------------------------------- -- Table Definition -- -- nncCeSpvcTable -- This table contains all information used to manage Circuit Emulation SPVCCs -- --------------------------------------------------------------------------- nncCeSpvcTable OBJECT-TYPE SYNTAX SEQUENCE OF NncCeSpvcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "nncCeSpvcTable contains all the objects sent to a source endpoint that are used to create, modify, delete and query CE SPVCCs. The table is indexed using ifIndex, which includes the circuit number field." ::= { nncExtSpvcObjects 7 } nncCeSpvcTableEntry OBJECT-TYPE SYNTAX NncCeSpvcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncCeSpvcTable." INDEX {ifIndex} ::= { nncCeSpvcTable 1 } NncCeSpvcTableEntry ::= SEQUENCE{ nncCeSpvcTargEpAddr AtmFormatDisplay, nncCeSpvcTargVpi INTEGER, nncCeSpvcTargVci INTEGER, nncCeSpvcTargCeNumber INTEGER, nncCeSpvcTargEpType INTEGER, nncCeSpvcAdminStatus INTEGER, nncCeSpvcPriority INTEGER, nncCeSpvcMaxAdminWeight Integer32, nncCeSpvcOperation INTEGER, nncCeSpvcCallStatus INTEGER, nncCeSpvcLocRerouteConfig INTEGER, nncCeSpvcFwdTmBucketOneRate INTEGER, nncCeSpvcFwdTmBucketOneCdvt INTEGER, nncCeSpvcBwdTmBucketOneRate INTEGER, nncCeSpvcBwdTmBucketOneCdvt INTEGER, nncCeSpvcCreator INTEGER, nncCeSpvcRowStatus RowStatus } nncCeSpvcTargEpAddr OBJECT-TYPE SYNTAX AtmFormatDisplay MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify the AESA address of the target endpoint. The mapping scheme is as follows: Byte\Bit 8 7 6 5 4 3 2 1 ------------------------------------------------------------------------ 1-13 byte | 13-byte Internal Subscriber Prefix | ------------------------------------------------------------------------ 14th byte | I/G | U/L | OUI(most significant 6 bits) | ------------------------------------------------------------------------ 15th byte | OUI(2nd most significant 8 bits | ------------------------------------------------------------------------ 16th byte | OUI(3rd most significant 8 bits | ------------------------------------------------------------------------ 17th byte | Shelf/Slot(1st most significant 8 bits | ------------------------------------------------------------------------ 18th byte | Shelf/Slot(2nd most significant 8 bits | ------------------------------------------------------------------------ 19th byte |Flag0| Port | ------------------------------------------------------------------------ 20th byte | Not used, default 0 | ------------------------------------------------------------------------ " ::= { nncCeSpvcTableEntry 1 } nncCeSpvcTargVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the virtual path identifier (VPI) value for the target endpoint. Used in interworking CE to CR connections when nncCeSpvcTargEpType configured as cellRelay(1). Range: 0 - 4095" ::= { nncCeSpvcTableEntry 2 } nncCeSpvcTargVci OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the virtual channel identifier (VCI) value for the target endpoint. Used in interworking CE to CR connections when nncCeSpvcTargEpType configured as cellRelay(1). Range: 1 - 65535" ::= { nncCeSpvcTableEntry 3 } nncCeSpvcTargCeNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains circuit number, channel group number or both for the Circuit Emulation endpoint. Used in CE to CE connections when nncCrSpvccTargEpType is configured as circuitEmulation(3). For CE connections on unchannelized DS3_CCE card, it's the circuit number 1-28 for UDT circuit number For CE connections on unchannelized E3_CCE card, it's the circuit number 1-16 for UDT circuit number For CE connections on E1/T1 CES, it's channel group number. 0 for UDT mode, both T1 and E1 1-31 for E1 in SDT mode 1-24 for T1 in SDT mode For CE connections on channelized DS3_CCE-2 card, it's circuit number and channel group number combined in the upper and lower byte. circuitNum (bits 9-16, = 1 to 28 for channelized DS3, = 0 for unstructured DS3) channelGroupNum (bits 1-8, = 1 to 24 for SDT mode, = 0 for UDT Mode) For CE connections on channelized E3_CCE-2, it's circuit number and channel group number combined in the upper and lower byte. circuitNum (bits 9-16, = 1 to 16) channelGroupNum (bits 1-8, = 1 to 31 for SDT mode, = 0 for UDT Mode) Example: Circuit Number = 7, Channel Group = 3 : nncCrSpvccTargCeNumber = (Circuit Number * 256) + Channel Group = 1795 SPVCs across service types other than circuit emulation do not require this object." DEFVAL { 1 } ::= { nncCeSpvcTableEntry 4 } nncCeSpvcTargEpType OBJECT-TYPE SYNTAX INTEGER { cellRelay(1), circuitEmulation(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a target endpoint as one of the following types: cellRelay (1) circuitEmulation (3) " DEFVAL { circuitEmulation } ::= { nncCeSpvcTableEntry 5 } nncCeSpvcAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabled, the SPVC is connected when possible. Use nncCeSpvcAdminStatus to determine if the connection is successful." ::= { nncCeSpvcTableEntry 6} nncCeSpvcPriority OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the priority for a SPVC connection request. It ranges between 1-16, with the following values: Best Priority = 1 Default Priority = 3 Worst Priority = 16" DEFVAL { 3 } ::= { nncCeSpvcTableEntry 7 } nncCeSpvcMaxAdminWeight OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set a cost threshold for an SPVC connection. If the total cost of all VPCs exceeds this weight value for a given path, this SPVC will choose an alternative path or give up. Infinite = -1 Min Admin Weight = 0 Max Admin Weight = 2147483647" DEFVAL { -1 } ::= { nncCeSpvcTableEntry 8 } nncCeSpvcOperation OBJECT-TYPE SYNTAX INTEGER { reRouteDualEp(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to request a reroute operation. Querying this object will not provide any useful information." ::= { nncCeSpvcTableEntry 9 } nncCeSpvcCallStatus OBJECT-TYPE SYNTAX INTEGER { connected(2), waitingForResources(4), readyToConnect(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object is used to query the state of a particular SPVC. SPVCs that are connected and operational will return a value of 'connected', while those that are incomplete or otherwise unable to be connected will return 'waitingForResources'. SPVCs that are configured but not yet connected will contain a value of 'readyForConnect'." ::= { nncCeSpvcTableEntry 10 } nncCeSpvcLocRerouteConfig OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- Disabled enabledNniSide(3) -- Enabled NNI side } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. For circuit emulation UNI side is not supported. It can be configured for either NNI side or disabled." DEFVAL { disabled } ::= { nncCeSpvcTableEntry 11 } -- forward traffic descriptors nncCeSpvcFwdTmBucketOneRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cells are 'excess'. Measured in Kb/s. Range: 0 - 2488320 Kb/s For N x DS0 SDT Basic connections = ((((1 + 1.0 / 128) * 8 * N / K) + (1.0/1000)) * 53.0 * 8.0) where N = 1..24 for T1 N = 1..31 for E1 K = 1..47 is the number of data octets per cell. For N x DS0 SDT CAS connections = ((((1 + 1.0 / 128) * 8 * (((Cn * N) + (N % 2)) / (Ck * K))) + (1.0/1000)) * 53.0 * 8.0) where N = 1..24 for T1 N = 1..31 for E1 K = 2..47 is the number of data octets per cell. Cn = 49 for T1 Cn = 33 for E1 Ck = 48 for T1 Ck = 32 for E1 = 1755 Kb/s for T1,DS1 UDT connections = 2328 Kb/s for E1 UDT connections = 50842 Kb/s for DS3 UDT connections" DEFVAL { 73 } ::= { nncCeSpvcTableEntry 12 } nncCeSpvcFwdTmBucketOneCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 3000 } ::= { nncCeSpvcTableEntry 13 } -- backward traffic descriptors nncCeSpvcBwdTmBucketOneRate OBJECT-TYPE SYNTAX INTEGER (0..2488320) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cells are 'excess'. Measured in Kb/s. Range: 0 - 2488320 Kb/s For N x DS0 SDT Basic connections = ((((1 + 1.0 / 128) * 8 * N / K) + (1.0/1000)) * 53.0 * 8.0) where N = 1..24 for T1 N = 1..31 for E1 K = 1..47 is the number of data octets per cell. For N x DS0 SDT CAS connections = ((((1 + 1.0 / 128) * 8 * (((Cn * N) + (N % 2)) / (Ck * K))) + (1.0/1000)) * 53.0 * 8.0) where N = 1..24 for T1 N = 1..31 for E1 K = 2..47 is the number of data octets per cell. Cn = 49 for T1 Cn = 33 for E1 Ck = 48 for T1 Ck = 32 for E1 = 1755 Kb/s for T1,DS1 UDT connections = 2328 Kb/s for E1 UDT connections = 50842 Kb/s for DS3 UDT connections" DEFVAL { 73 } ::= { nncCeSpvcTableEntry 14 } nncCeSpvcBwdTmBucketOneCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 3000 } ::= { nncCeSpvcTableEntry 15 } nncCeSpvcCreator OBJECT-TYPE SYNTAX INTEGER { unknown(0), -- Creator is unknown nmti(1), -- Creator is NMTI nm5620(2), -- Creator is 5620 snmp(9) -- Creator is SNMP } MAX-ACCESS read-only STATUS current DESCRIPTION "The object retrieves the creator of a SPVC connection." ::= { nncCeSpvcTableEntry 16 } nncCeSpvcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWait', information for a row is cached in memory; when RowStatus is set to 'createAndGo' or 'active', it indicates that all information is to be written to permanent storage, and the SPVC to be enabled (AdminStatus must also be set to 'enabled'). When querying the object, 'active' indicates a configured SPVC with its AdminStatus enabled, while a status of 'notInService' indicates either a disabled AdminStatus or an inability to connect the SPVC. If a query returns 'notInService', use the CallStatus object to further determine the state of the SPVC. If the value 'notReady' is returned, it indicates that the SNMP agent is awaiting further information before activating the connection. When deleting a connection, use this object with the value 'destroy'" ::= {nncCeSpvcTableEntry 17 } --------------------------------------------------------------------------- -- Table Definition -- -- The nncCeSpvcDstCfgTable -- This table contains all information used to configure the destination -- endpoint of an SPVC. -- --------------------------------------------------------------------------- nncCeSpvcDstCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF NncCeSpvcDstCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "the nncCeSpvcDstCfg table contains common objects used to configure, delete, modify and query the destination end point of an SPVC across different Alcatel CID platforms." ::= { nncExtSpvcObjects 8 } nncCeSpvcDstCfgTableEntry OBJECT-TYPE SYNTAX NncCeSpvcDstCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncCeSpvcDstCfgTable." INDEX {ifIndex} ::= { nncCeSpvcDstCfgTable 1 } NncCeSpvcDstCfgTableEntry ::= SEQUENCE{ nncCeSpvcDstCfgCdvt INTEGER, nncCeSpvcDstCfgLocRerouteConfig INTEGER, nncCeSpvcDstCfgRowStatus RowStatus } nncCeSpvcDstCfgCdvt OBJECT-TYPE SYNTAX INTEGER (1..190000) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 microseconds" DEFVAL { 3000 } ::= { nncCeSpvcDstCfgTableEntry 1 } nncCeSpvcDstCfgLocRerouteConfig OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- Disabled enabledNniSide(3) -- Enabled NNI side } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. For circuit emulation UNI side is not supported. It can be configured for either NNI side or disabled." DEFVAL { disabled } ::= { nncCeSpvcDstCfgTableEntry 2 } nncCeSpvcDstCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWait', information for a row is cached in memory; when RowStatus is set to 'createAndGo' or 'active', it indicates that all information is to be written to permanent storage, and the SPVC to be enabled (AdminStatus must also be set to 'enabled'). When querying the object, 'active' indicates a configured SPVC with its AdminStatus enabled, while a status of 'notInService' indicates either a disabled AdminStatus or an inability to connect the SPVC. If a query returns 'notInService', use the CallStatus object to further determine the state of the SPVC. If the value 'notReady' is returned, it indicates that the SNMP agent is awaiting further information before activating the connection. When deleting a connection, use this object with the value 'destroy'" ::= { nncCeSpvcDstCfgTableEntry 3 } ------------------------------------------------------------------- -- Conformance Group Definitions ------------------------------------------------------------------- nncCrSpvpcGroup OBJECT-GROUP OBJECTS { nncCrSpvpcServiceCategory, nncCrSpvpcTargEpAddr, nncCrSpvpcTargVpi, nncCrSpvpcAdminStatus, nncCrSpvpcPriority, nncCrSpvpcMaxAdminWeight, nncCrSpvpcOperation, nncCrSpvpcCallStatus, nncCrSpvpcLocRerouteConfig, nncCrSpvpcFwdAbrDynTrfcIcr, nncCrSpvpcFwdAbrDynTrfcRif, nncCrSpvpcFwdAbrDynTrfcRdf, nncCrSpvpcBwdAbrDynTrfcIcr, nncCrSpvpcBwdAbrDynTrfcRif, nncCrSpvpcBwdAbrDynTrfcRdf, nncCrSpvpcSrcBillingFlag, nncCrSpvpcFwdTmTrafficDescriptor, nncCrSpvpcFwdTmPolicingOption, nncCrSpvpcFwdTmBucketOneRate, nncCrSpvpcFwdTmBucketOneCdvt, nncCrSpvpcFwdTmBucketTwoRate, nncCrSpvpcFwdTmBucketTwoMbs, nncCrSpvpcFwdTmCdv, nncCrSpvpcFwdTmClr, nncCrSpvpcBwdTmTrafficDescriptor, nncCrSpvpcBwdTmPolicingOption, nncCrSpvpcBwdTmBucketOneRate, nncCrSpvpcBwdTmBucketOneCdvt, nncCrSpvpcBwdTmBucketTwoRate, nncCrSpvpcBwdTmBucketTwoMbs, nncCrSpvpcBwdTmCdv, nncCrSpvpcBwdTmClr, nncCrSpvpcCreator, nncCrSpvpcRowStatus } STATUS current DESCRIPTION "Common MIB objects for configuring a CR SPVPC source end-point across all Alcatel CID ATM platforms." ::= { nncExtSpvcGroups 1 } nncCrSpvpcDstCfgGroup OBJECT-GROUP OBJECTS { nncCrSpvpcDstCfgCdvt, nncCrSpvpcDstCfgPolicing, nncCrSpvpcDstCfgBillingFlag, nncCrSpvpcDstCfgLocRerouteConfig, nncCrSpvpcDstCfgRowStatus } STATUS current DESCRIPTION "Common MIB objects for configuring a Cell Relay SPVPC destination end-point across all Alcatel CID ATM platforms." ::= { nncExtSpvcGroups 2 } nncCrSpvccGroup OBJECT-GROUP OBJECTS { nncCrSpvccServiceCategory, nncCrSpvccTargEpAddr, nncCrSpvccTargVpi, nncCrSpvccTargVci, nncCrSpvccTargDlci, nncCrSpvccTargCeNumber, nncCrSpvccTargEpType, nncCrSpvccAdminStatus, nncCrSpvccPriority, nncCrSpvccMaxAdminWeight, nncCrSpvccOperation, nncCrSpvccCallStatus, nncCrSpvccLocRerouteConfig, nncCrSpvccFwdAbrDynTrfcIcr, nncCrSpvccFwdAbrDynTrfcRif, nncCrSpvccFwdAbrDynTrfcRdf, nncCrSpvccBwdAbrDynTrfcIcr, nncCrSpvccBwdAbrDynTrfcRif, nncCrSpvccBwdAbrDynTrfcRdf, nncCrSpvccSrcBillingFlag, nncCrSpvccFwdTmTrafficDescriptor, nncCrSpvccFwdTmPolicingOption, nncCrSpvccFwdTmBucketOneRate, nncCrSpvccFwdTmBucketOneCdvt, nncCrSpvccFwdTmBucketTwoRate, nncCrSpvccFwdTmBucketTwoMbs, nncCrSpvccFwdTmCdv, nncCrSpvccFwdTmClr, nncCrSpvccFwdTmFrameDiscard, nncCrSpvccBwdTmTrafficDescriptor, nncCrSpvccBwdTmPolicingOption, nncCrSpvccBwdTmBucketOneRate, nncCrSpvccBwdTmBucketOneCdvt, nncCrSpvccBwdTmBucketTwoRate, nncCrSpvccBwdTmBucketTwoMbs, nncCrSpvccBwdTmCdv, nncCrSpvccBwdTmClr, nncCrSpvccBwdTmFrameDiscard, nncCrSpvccFrBwdTmAr, nncCrSpvccFrBwdTmCir, nncCrSpvccFrBwdTmBc, nncCrSpvccFrBwdTmBe, nncCrSpvccFrBwdTmIwf, nncCrSpvccFrBwdTmPo, nncCrSpvccFrBwdTmPacing, nncCrSpvccFrBwdTmPtclMapping, nncCrSpvccFrBwdTmClpMapping, nncCrSpvccFrBwdTmDeMapping, nncCrSpvccFrBwdTmEfciMapping, nncCrSpvccFrBwdTmPvcMgntProfile, nncCrSpvccFrBwdTmSIWProfile, nncCrSpvccCreator, nncCrSpvccRowStatus } STATUS current DESCRIPTION "Common MIB objects for configuring a CR SPVC source end-point across all Alcatel CID ATM platforms." ::= { nncExtSpvcGroups 3 } nncCrSpvccDstCfgGroup OBJECT-GROUP OBJECTS { nncCrSpvccDstCfgCdvt, nncCrSpvccDstCfgPolicing, nncCrSpvccDstCfgBillingFlag, nncCrSpvccDstCfgFrVsvdCongestionControl, nncCrSpvccDstCfgLocRerouteConfig, nncCrSpvccDstCfgRowStatus } STATUS current DESCRIPTION "Common MIB objects for configuring a Cell Relay SPVC destination end-point across all Alcatel CID ATM platforms." ::= { nncExtSpvcGroups 4 } nncFrSpvcGroup OBJECT-GROUP OBJECTS { nncFrSpvcSrcDlci, nncFrSpvcTargEpAddr, nncFrSpvcTargDlci, nncFrSpvcTargVpi, nncFrSpvcTargVci, nncFrSpvcTargEpType, nncFrSpvcAdminStatus, nncFrSpvcPriority, nncFrSpvcMaxAdminWeight, nncFrSpvcOperation, nncFrSpvcCallStatus, nncFrSpvcLocRerouteConfig, nncFrSpvcSrcBillingFlag, nncFrSpvcFrPriority, nncFrSpvcFrVsvdCongestionControl, nncFrSpvcFwdFrMir, nncFrSpvcFwdTmAr, nncFrSpvcFwdTmCir, nncFrSpvcFwdTmBc, nncFrSpvcFwdTmBe, nncFrSpvcTmIwf, nncFrSpvcFwdTmPo, nncFrSpvcFwdTmPacing, nncFrSpvcTmPtclMapping, nncFrSpvcTmClpMapping, nncFrSpvcTmDeMapping, nncFrSpvcTmEfciMapping, nncFrSpvcTmPvcMgntProfile, nncFrSpvcTmSIWProfile, nncFrSpvcTmRemapDlci, nncFrSpvcBwdTmAr, nncFrSpvcBwdTmCir, nncFrSpvcBwdTmBc, nncFrSpvcBwdTmBe, nncFrSpvcBwdTmPo, nncFrSpvcBwdTmPacing, nncFrSpvcCrTmServiceCategory, nncFrSpvcCrBwdTmTrafficDescriptor, nncFrSpvcCrBwdTmPolicingOption, nncFrSpvcCrBwdTmBucketOneRate, nncFrSpvcCrBwdTmBucketOneCdvt, nncFrSpvcCrBwdTmBucketTwoRate, nncFrSpvcCrBwdTmBucketTwoMbs, nncFrSpvcCrBwdTmCdv, nncFrSpvcCrBwdTmClr, nncFrSpvcCrBwdTmFrameDiscard, nncFrSpvcCreator, nncFrSpvcRowStatus } STATUS current DESCRIPTION "Common MIB objects for configuring an SPVC using a Frame Relay source end-point across all Alcatel CID ATM platforms." ::= { nncExtSpvcGroups 5 } nncFrSpvcDstCfgGroup OBJECT-GROUP OBJECTS { nncFrSpvcDstCfgTmAr, nncFrSpvcDstCfgTmCir, nncFrSpvcDstCfgTmBc, nncFrSpvcDstCfgTmBe, nncFrSpvcDstCfgTmIwf, nncFrSpvcDstCfgTmPo, nncFrSpvcDstCfgTmPacing, nncFrSpvcDstCfgTmPtclMapping, nncFrSpvcDstCfgTmClpMapping, nncFrSpvcDstCfgTmDeMapping, nncFrSpvcDstCfgTmEfciMapping, nncFrSpvcDstCfgTmPvcMgntProfile, nncFrSpvcDstCfgTmSIWProfile, nncFrSpvcDstCfgTmRemapDlci, nncFrSpvcDstCfgBillingFlag, nncFrSpvcDstCfgFrPriority, nncFrSpvcDstCfgLocRerouteConfig, nncFrSpvcDstCfgRowStatus } STATUS current DESCRIPTION "Common MIB objects for configuring a Frame-Relay SPVC destination end-point across all Alcatel CID ATM platforms." ::= { nncExtSpvcGroups 6 } nncCeSpvcGroup OBJECT-GROUP OBJECTS { nncCeSpvcTargEpAddr, nncCeSpvcTargVpi, nncCeSpvcTargVci, nncCeSpvcTargCeNumber, nncCeSpvcTargEpType, nncCeSpvcAdminStatus, nncCeSpvcPriority, nncCeSpvcMaxAdminWeight, nncCeSpvcOperation, nncCeSpvcCallStatus, nncCeSpvcLocRerouteConfig, nncCeSpvcFwdTmBucketOneRate, nncCeSpvcFwdTmBucketOneCdvt, nncCeSpvcBwdTmBucketOneRate, nncCeSpvcBwdTmBucketOneCdvt, nncCeSpvcCreator, nncCeSpvcRowStatus } STATUS current DESCRIPTION "Common MIB objects for configuring a Circuit Emulation-based SPVC source end-point across all Alcatel CID ATM platforms." ::= { nncExtSpvcGroups 7 } nncCeSpvcDstCfgGroup OBJECT-GROUP OBJECTS { nncCeSpvcDstCfgCdvt, nncCeSpvcDstCfgLocRerouteConfig, nncCeSpvcDstCfgRowStatus } STATUS current DESCRIPTION "Common MIB objects for configuring a Circuit Emulation SPVC destination end-point across all Alcatel CID ATM platforms." ::= { nncExtSpvcGroups 8 } ------------------------------------------------------------------ -- Compliance Statements ------------------------------------------------------------------ nncSpvcCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Alcatel CID SPVC MIB implementation." MODULE MANDATORY-GROUPS { nncCrSpvpcGroup, nncCrSpvpcDstCfgGroup, nncCrSpvccGroup, nncCrSpvccDstCfgGroup, nncFrSpvcGroup, nncFrSpvcDstCfgGroup, nncCeSpvcGroup, nncCeSpvcDstCfgGroup } ::= { nncExtSpvcCompliances 1 } END -- DEFINITION OF NNCEXTSPVC-MIB ------------------------------------------------------------------------------- -- Review Minutes ------------------------------------------------------------------------------- -- -------------------------------------------------------------------------------- -- MINUTES-BEGIN -- REVIEW-DATE "2000.03.22" -- BODY " -- -- -- TO: George Yu*, Jack Sinclair*, Iqbal Pandher*, -- William McConnochie*, Randy Jones, David Ker*, Yi Fang, -- Mark Weedmark* Peter Roberts* Peter Dippel -- FROM: Jiaou Li* (derived from Jack's original minutes) -- -- A internal review meeting was held on 2000.03.22 to review nncExtSpvc.mib. -- Attendees are marked with * in the TO and CC lists above. -- -- Outcome -- -- It was the consensus of the review team that this file is -- acceptable for an official review with the indicated modifications -- -- Actions: -- A1 - Jiaou to update nncExtSpvc.mib as described in Decision D1. -- -- Response Status Closed -- 2000.04.04 Updated nncExtSpvc.mib according to D1. -- -- Decisions: -- D1 - nncExtSpvc.mib shall be updated as follows: -- a. In module definition, add a line for trap OBJ. -- b. In Page 9, comformance section, there are two groups: -- one for Cell Relay, another for Frame Relay. Form them into -- one group. -- c. In Page 1, add comments for type definition. -- d. Indexes: atmVclVpi, atmVclVci should be renamed as we cover -- traffic types other than Cell Relay. -- e. MIB Object nncSpvcmaxAdminWeight: the 'm' in 'max' should be -- capitalized. -- f. All words in a name (including abbreviations) shall have the -- first letter capitalized, with all remaining letters in lower -- case. If an entry is a data type, the first letter shall be -- capitalized, and all other entries shall have their first -- letter in lower case. -- g. Delete the nncSPVCSrcEp MIB object and use ifIndex + nncExtIndex1 -- + nncExtIndex2 as the information source. -- h. nncSpvcAdminStatusAndRowStatus should be broken down into two -- MIB objects. One is for AdminStatus; another is for RowStatus. -- i. Enumerated object values should be in SYNTAX definition for -- data invalidation. -- j. nncSPVCCallId better be defined as OCTET STRING instead of -- DisplayString. -- -- END-MINUTES ------------------------------------------------------------------------------- -- MINUTES-BEGIN -- REVIEW-DATE "2000.04.10" -- BODY " -- -- -- TO: Fernando Bello*, Bryan Lockie*, Carl Rajsic*, George Soccar*, -- John Sullivan*, Mark Weedmark*, Adrian Tsang*, George Yu*, -- Jiaou Li*, Yi Fang* -- CC: Peter Dippel, Shawn McCallister, Dave Watkinson, Mairi McKissock, -- David Maxwell, Chris Anastasiadis, Carmen Wong -- FROM: Jack Sinclair -- -- A formal review was held on 2000.04.10 to discuss the SNMP SPVC MIB -- nncExtSpvc.mib. -- Attendees are marked with * in the TO and CC lists above. -- -- Action Items: -- -- A1 - Jack Sinclair to update the FS document (31FS0124) to describe the -- hints and tips in the MIB's -- Table Definition portion of the MIB. -- -- Response Status: Closed -- 2000.04.21 FS0124 updated to reflect MIB information -- -- -- A2 - Jack Sinclair to describe the CallId object in the FS document. -- -- Response Status: Closed -- -- A3 - Jack Sinclair to describe the AdminStatus object in the FS -- document, and in particular describe its -- variance from other Alcatel CID AdminStatus variables. -- -- Response Status: Closed -- 2000.04.21 FS0124 updated -- -- A4 - Jiaou Li to change the object nncSPVCAdminStatus to -- nncSpvcAdminStatus. -- -- Response Status: Closed -- 2000.04.21 FS0124 updated to reflect MIB information -- -- A5 - Jiaou Li to modify the MAX-ACCESS of nncSPVCAdminStatus to -- READ-CREATE (line 321). -- -- Response Status: Closed -- -- A6 - Jiaou Li to update the object descriptions to provide users of the -- MIB a functional understanding of the objects. -- At a minimum, the following object descriptions are to be modified: -- -- - nncSpvcCallStatus: Describe the meaning of the 0..256 values (line -- 375). -- - nncSpvcSrcTmVersion: Describe how this NncExtByte encodes the -- source end-point software version (line 386). -- - nncSpvcServiceCategory: Describe how this Integer32 is used to set the -- service category using the values 0..256 (line 486). -- - nncSpvcDstCfgAr: Describe how the AR rate for FR traffic is -- specified with this Integer32 (line 1097). -- -- Response Status: Closed -- 2000.04.18 MIB description updated -- -- A7 - Jiaou Li to add the time unit being assumed in nncSpvcDstCfgCdvt -- (line 1088). -- -- Response Status: Closed -- 2000.04.20 microseconds added -- -- A8 - George Yu to resolve the scope of this MIB, and in particular -- determine suitability to the 50g. -- -- Response Status: Closed -- 2000.04.14 MIB to support all ATM products -- 2000.04.19 Jiaou Li added MIB support via new tables -- ------------------------------------------------------------------------------- -- MINUTES-BEGIN -- REVIEW-DATE "2000.09.07" -- BODY " -- -- -- TO: Navdeep Dhillon*, Peter Dipple*, David Maxwell*, George Yu*, -- John Sullivan*, Derek Puddicombe*, Paul Puddicombe*, -- Jack Sinclair, Neeraj Chandra, Carol-Anne Blore -- CC: Peter Dippel, Shawn McCallister, Dave Watkinson, Mairi McKissock, -- David Maxwell, Chris Anastasiadis, Carmen Wong -- FROM: Jiaou -- -- A formal review was held on 2000.09.07 to discuss the SNMP SPVC MIB -- nncExtSpvc.mib. -- Attendees are marked with * in the TO and CC lists above. -- -- Action Items: -- -- A1 - Jiaou Li to add LOC feature MIB object for all destination -- table. -- Response Status: Closed -- 2000.09.10 NncExtSPVC.mib updated -- -- -- A2 - Jiaou Li to change all Cdvt default setting from 250 to 500 -- -- Response Status: Closed -- 2000.09.18 updated -- A3 - Jiaou Li to eliminate all source exclusive related description -- Response Status: Closed -- 2000.09.18 updated -- -- A4 - Jiaou Li to change rtbr to rtvbr in service category description -- Response Status: Closed -- 2000.09.18 updated -- -- A5 - Jiaou Li to add more description in TargEpAddr. -- Response Status: Closed -- 2000.09.18 updated -- A6 - Jiaou Li to collect comments from FR and CE owner for this MIB -- Response Status: Open -- -- ------------------------------------------------------------------------------- -- MINUTES-BEGIN -- REVIEW-DATE "2001.02.12" -- BODY " -- -- -- TO: John Coady*, Peter Dippel*, Wesley Mah*, William McConnochie*, -- Jack Sinclair*, George Yu* -- -- CC: -- -- FROM: John Coady -- -- A formal review was held on 2001.01.12 to review changes to -- NncExtSPVC.mib made by John Coady for circuit emulation. -- Attendees are marked with * in the TO and CC lists above. -- -- Action Items: -- -- A1 - John Coady to update NncExtSPVC.mib as described in Decision D7 -- -- Response Status: Closed -- 2001.02.15 Updated -- -- -- A2 - William McConnochie update conformance table in mib and -- run mibtrans. Fix any errors. -- -- Response Status: Closed -- 2001.02.15 Completed -- -- A3 - William McConnochie make software changes to support changes -- to NncExtSPVC.mib, -- -- Response Status: Closed -- 2001.02.15 Completed -- -- A4 - William McConnochie update NncExtSPVC.imp . -- -- Response Status: Closed -- 2001.02.15 Updated -- -- Decisions: -- -- D1: Circuit Emulation only supports CBR traffic service category. A new -- mib table will be required in the future to support AAL2 functionality -- for voice services card. -- D2: nncCeSpvcTargCeNumber MAX-ACCESS to be changed from "not-accessible" -- to "read-create" -- D3: nncCeSpvcFwdTmCdv and nncCeSpvcBwdTmCdv variables not required since -- nrt-VBR is not supported by Circuit Emulation. -- D4: nncCeSpvcTargVpi and nncCeSpvcTargVci are only to be used for -- interworking connections (CE-CR). nncCeSpvcTargCeNumber is only to be -- used for CE-CE connections. -- D5: for nncCeSpvcLocRerouteConfig UNI is not supported for circuit -- emulation. -- D6: nncCeSpvcFwdTmFrameDiscard and nncCeSpvcBwdFrameDiscard not required -- since AAL5 is not supported by Circuit Emulation. -- D7: NncExtSpvc.mib shall be updated as follows: -- a) Update MIB to make nncCeSpvcTargCeNumber "read-create" -- b) Check nci configuration of policing via 46020 to see which -- options are configurable on CE endpoints. Based on findings, keep or -- remove nncCeSpvcFwdTmPolicingOption, nncCeSpvcBwdTmPolicingOption and -- nncCeSpvcDstCfgPolicing in MIB -- c) Remove nncCeSpvcFwdTmCdv and nncCeSpvcFwdTmCdv from mib. -- d) Remove nncCeSpvcFwdTmFrameDiscard and nncCeSpvcBwdTmFrameDiscard -- from mib. -- -- -- -------------------------------------------------------------------------------