-- Based on e-mailed requirements from I. Vishandas (dated 7/7, 7/8, 7/14/97). -- This MIB file represents the Traffic Management MIB for access device releases -- beginning at version 2.0. (This replaces the TM MIB file, mcmtm.mib, -- used for 1.x releases. This MIB file, mcmtm.mib, shall be deprecated, -- and eventually obsoleted.) -- -- MIB Revision : 1.0 dated 7-21-97 -- Change Desc. : Initial submittal - R. Carmona. -- -- MIB Revision : 1.1 dated 10-7-97 -- Change Desc. : Replaced MPA with 4400, and other minor changes - B. Jafari. -- -- MIB Revision : 2.0 dated 10-16-97 -- Change Desc. : Added two groups: mcmTMGlobalParamGroup and nvmTMGlobalParamGroup. -- -- *** RELEASE 3.0 *** -- MIB Revision : 2.1 dated 6-24-98 -- Change Desc. : Removed and/or replaced "4400" with -- "access device" wherever possible. -- Obsoleted counter reset table, -- mcmTMcntlCounterTable. -A. Llanes -- -- MIB Revision : 2.2 dated 12-4-98 -- Change Desc. : Added 65535 to the range for MPANLDlciNum, StateMPANLDlciNum, -- StatsMPANLDlciNum. A value of 65535 indicates that the DLCI -- number is not being used. Previous to this change, a -1 was -- being returned by the low level module to indicate that the -- DLCI Number was not in use. A -1 is an invalid number -- as an index into a MIB table. This change corrects a -- MIB Walk failure for TM. -A. Llanes -- -- MIB Revision : 2.3 dated 12-9-98 -- Change Desc. : Due to a bug in the CastleRock SNMPc compiler, the ranges for -- MPANLDlciNum, StateMPANLDlciNum, and StatsMPANLDlciNum needed -- to be modified by placing the 65535 first followed by the '|'. -- This changes allows the SNMPc compiler to successfully compile -- this MIB. - A. Llanes -- MICOM-TRAFFIC-MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 Counter FROM RFC1155-SMI micom-oscar FROM MICOM-OSCAR-MIB; -- group OBJECT IDENTIFIERs micom-2tm OBJECT IDENTIFIER ::= {micom-oscar 27} tm2-configuration OBJECT IDENTIFIER ::= {micom-2tm 1} tm2-status OBJECT IDENTIFIER ::= {micom-2tm 2} tm2-statistics OBJECT IDENTIFIER ::= {micom-2tm 3} tm2-control OBJECT IDENTIFIER ::= {micom-2tm 4} -- *** CONFIGURATION groups/tables *** -- Operational Parameter ("mcm") Groups/Tables -- Traffic Management Class Parameters Configuration Table mcmTMclassParamTable OBJECT-TYPE SYNTAX SEQUENCE OF McmTMclassParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NAME = ; DESC = The Traffic Management Class Parameters \ configuration table.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;" ::= { tm2-configuration 1 } mcmTMclassParamEntry OBJECT-TYPE SYNTAX McmTMclassParamEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NAME = ; DESC = An entry in the Traffic Management Class \ Parameters configuration table.; HELP = ; CAPABILITIES = ;" INDEX { mcmTMclassParamSccNum, mcmTMclassParamFRDlciNum, mcmTMclassParamMPANLDlciNum } ::= { mcmTMclassParamTable 1 } McmTMclassParamEntry ::= SEQUENCE { mcmTMclassParamSccNum INTEGER, mcmTMclassParamFRDlciNum INTEGER, mcmTMclassParamMPANLDlciNum INTEGER, mcmTMclassParamPriority INTEGER, mcmTMclassParamCIR INTEGER, mcmTMclassParamExcessInfoRate INTEGER, mcmTMclassParamMaxBurstBytesSz INTEGER, mcmTMclassParamMaxBurstFrmSz INTEGER, mcmTMclassParamAvgPacketSize INTEGER, mcmTMclassParamMaxPacketSize INTEGER, mcmTMclassParamDelta INTEGER, mcmTMclassParamSFrames INTEGER } mcmTMclassParamSccNum OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The WAN physical port number. Used as index to \ TM Class Parameters configuration table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 1 } mcmTMclassParamFRDlciNum OBJECT-TYPE SYNTAX INTEGER (16..1007) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The DLCI of the tunneling PVC. Used as index \ to TM Class Parameters configuration table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 2 } mcmTMclassParamMPANLDlciNum OBJECT-TYPE SYNTAX INTEGER (65535 | 0..1024) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The MPANL DLCI identifying the virtual connection. \ Used as index to TM Class Parameters configuration \ table. A value of 65535 indicates that the DLCI number \ does not exist or is not being used.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 3 } mcmTMclassParamPriority OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The emission priority of the class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 4 } mcmTMclassParamCIR OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The committed information rate of the class \ (in bits/sec). Range is 0 to max bw of the link.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 5 } mcmTMclassParamExcessInfoRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The excess information rate of the class \ (in bits/sec). The excess bw required to \ accommodate momentary bursts of traffic.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 6 } mcmTMclassParamMaxBurstBytesSz OBJECT-TYPE SYNTAX INTEGER (0..4000000) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The maximum burst allowed for this class \ (in bytes).; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 7 } mcmTMclassParamMaxBurstFrmSz OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The maximum burst allowed for this class \ (in frames).; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 8 } mcmTMclassParamAvgPacketSize OBJECT-TYPE SYNTAX INTEGER (0..1536) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The average packet size that will be transmitted by \ this class (in bytes).; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 9 } mcmTMclassParamMaxPacketSize OBJECT-TYPE SYNTAX INTEGER (0..1536) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The maximum packet size that will be transmitted by \ this class (in bytes).; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 10 } mcmTMclassParamDelta OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The delta time used for FECN bit management. \ Counts of frames received with the FECN bit set \ and cleared are maintained for this amount of time \ and are used to increase or decrease throughput \ rate as per Q.922 Appendix I.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 11 } mcmTMclassParamSFrames OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The S variable value. This variable, computed as \ per Q.922 Appendix I, section 1.2.2.1.1, holds the \ number of consecutive frames received with the \ BECN bit set which causes a transmit rate reduction. \ Any range may be specified by the LMI user at the \ time of the DCLI assignment.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassParamEntry 12 } -- Operational Parameter ("mcm") Groups -- Traffic Management Global Parameters group. mcmTMGlobalParamGroup OBJECT IDENTIFIER ::= { tm2-configuration 2 } mcmTmRateEnforcement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = Rate Enforcement is either enabled or disabled.; HELP = Is Rate Enforcement enabled?; CAPABILITIES = NET_CFG, VPN_CFG;" ::= { mcmTMGlobalParamGroup 1 } mcmTmLineEfficiency OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = Line efficiency is either enabled or disabled. \ If it is enabled, subscribed class will be \ allowed to send data if no other class has data \ to transmite and total LINE CIR is not exceeded; HELP = Is Line Efficiency enabled?; CAPABILITIES = NET_CFG, VPN_CFG;" ::= { mcmTMGlobalParamGroup 2 } mcmTmWeightedRoundRobin OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = Weighted round robin is either enabled or \ disabled. If it is disabled the packet round \ robin is used; HELP = Is WRR enabled?; CAPABILITIES = NET_CFG, VPN_CFG;" ::= { mcmTMGlobalParamGroup 3 } nvmTMGlobalParamGroup OBJECT IDENTIFIER ::= { tm2-configuration 3 } nvmTmRateEnforcement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "NAME = ; DESC = Rate Enforcement is either enabled or disabled.; HELP = Is Rate Enforcement enabled?; CAPABILITIES = NET_CFG, VPN_CFG;" ::= { nvmTMGlobalParamGroup 1 } nvmTmLineEfficiency OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "NAME = ; DESC = Line efficiency is either enabled or disabled. \ If it is enabled, subscribed class will be \ allowed to send data if no other class has data \ to transmite and total LINE CIR is not exceeded; HELP = Is Line Efficiency enabled?; CAPABILITIES = NET_CFG, VPN_CFG;" ::= { nvmTMGlobalParamGroup 2 } nvmTmWeightedRoundRobin OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "NAME = ; DESC = Weighted round robin is either enabled or \ disabled. If it is disabled the packet round \ robin is used; HELP = Is WRR enabled?; CAPABILITIES = NET_CFG, VPN_CFG;" ::= { nvmTMGlobalParamGroup 3 } -- *** STATUS groups/tables *** -- Operational Parameter ("mcm") Groups/Tables (note: no parallel "nvm" objects -- are defined for STATUS parameters.) -- Traffic Management Class State Table mcmTMclassStateTable OBJECT-TYPE SYNTAX SEQUENCE OF McmTMclassStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NAME = ; DESC = The Traffic Management Class State \ table.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;" ::= { tm2-status 1 } mcmTMclassStateEntry OBJECT-TYPE SYNTAX McmTMclassStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NAME = ; DESC = An entry in the Traffic Management Class \ state table.; HELP = ; CAPABILITIES = ;" INDEX { mcmTMclassStateSccNum, mcmTMclassStateFRDlciNum, mcmTMclassStateMPANLDlciNum } ::= { mcmTMclassStateTable 1 } McmTMclassStateEntry ::= SEQUENCE { mcmTMclassStateSccNum INTEGER, mcmTMclassStateFRDlciNum INTEGER, mcmTMclassStateMPANLDlciNum INTEGER, mcmTMclassStateCurrentInfoRate INTEGER, mcmTMclassStateMinInfoRate INTEGER, mcmTMclassStateAvgTxRate INTEGER, mcmTMclassStateBytesQueued Counter, mcmTMclassStateFramesQueued Counter } mcmTMclassStateSccNum OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The WAN physical port number. Used as index to \ TM Class state table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStateEntry 1 } mcmTMclassStateFRDlciNum OBJECT-TYPE SYNTAX INTEGER (16..1007) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The DLCI of the tunneling PVC. Used as index \ to TM Class state table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStateEntry 2 } mcmTMclassStateMPANLDlciNum OBJECT-TYPE SYNTAX INTEGER (65535 | 0..1024) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The MPANL DLCI identifying the virtual connection. \ Used as index to TM Class state table. \ A value of 65535 indicates that the DLCI number \ does not exist or is not being used.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStateEntry 3 } mcmTMclassStateCurrentInfoRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The current information rate of the class.; HELP = CIR for this VC at this time.; CAPABILITIES = ;" ::= { mcmTMclassStateEntry 4 } mcmTMclassStateMinInfoRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The minimum information rate of the class.; HELP = Minimum value of CIR for this VC.; CAPABILITIES = ;" ::= { mcmTMclassStateEntry 5 } mcmTMclassStateAvgTxRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The average transmit rate of the class.; HELP = Avg rate of data transmitted in bps on this VC.; CAPABILITIES = ;" ::= { mcmTMclassStateEntry 6 } mcmTMclassStateBytesQueued OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The number of bytes in transmit queue of the class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStateEntry 7 } mcmTMclassStateFramesQueued OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The number of frames in transmit queue of the class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStateEntry 8 } -- *** STATISTICS groups/tables *** -- Operational Parameter ("mcm") Groups/Tables (note: no parallel "nvm" objects -- are defined for STATISTICS parameters.) -- Traffic Management Class Statistics Table mcmTMclassStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF McmTMclassStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NAME = ; DESC = The Traffic Management Class Statistics \ table.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG ;" ::= { tm2-statistics 1 } mcmTMclassStatsEntry OBJECT-TYPE SYNTAX McmTMclassStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NAME = ; DESC = An entry in the Traffic Management Class \ statistics table.; HELP = ; CAPABILITIES = ;" INDEX { mcmTMclassStatsSccNum, mcmTMclassStatsFRDlciNum, mcmTMclassStatsMPANLDlciNum } ::= { mcmTMclassStatsTable 1 } McmTMclassStatsEntry ::= SEQUENCE { mcmTMclassStatsSccNum INTEGER, mcmTMclassStatsFRDlciNum INTEGER, mcmTMclassStatsMPANLDlciNum INTEGER, mcmTMclassStatsTotalBytesTx Counter, mcmTMclassStatsTotalFramesTx Counter, mcmTMclassStatsTotalFragsTx Counter, mcmTMclassStatsTotalBytesRx Counter, mcmTMclassStatsTotalFramesRx Counter, mcmTMclassStatsTotalFragsRx Counter, mcmTMclassStatsPktsDiscQueFull Counter, mcmTMclassStatsPktsDiscQueOverflow Counter, mcmTMclassStatsPktsDiscEmitFail Counter, mcmTMclassStatsPktsDiscEmitQueFull Counter, mcmTMclassStatsTotalFecnClearRcvd Counter, mcmTMclassStatsTotalFecnSetRcvd Counter, mcmTMclassStatsTotalBecnRcvd Counter } mcmTMclassStatsSccNum OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The WAN physical port number. Used as index to \ TM Class statistics table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 1 } mcmTMclassStatsFRDlciNum OBJECT-TYPE SYNTAX INTEGER (16..1007) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The DLCI of the tunneling PVC. Used as index \ to TM Class statistics table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 2 } mcmTMclassStatsMPANLDlciNum OBJECT-TYPE SYNTAX INTEGER (65535 | 0..1024) ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The MPANL DLCI identifying the virtual connection. \ Used as index to TM Class statistics table. \ A value of 65535 indicates that the DLCI number \ does not exist or is not being used.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 3 } mcmTMclassStatsTotalBytesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of bytes transmitted by this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 4 } mcmTMclassStatsTotalFramesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of frames transmitted by this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 5 } mcmTMclassStatsTotalFragsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of fragments transmitted by this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 6 } mcmTMclassStatsTotalBytesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of bytes received by this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 7 } mcmTMclassStatsTotalFramesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of frames received by this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 8 } mcmTMclassStatsTotalFragsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of fragments received by this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 9 } mcmTMclassStatsPktsDiscQueFull OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The number of packets discarded because the \ traffic shaping queue was full.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 10 } mcmTMclassStatsPktsDiscQueOverflow OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The number of packets discarded because the \ traffic shaping queue was overflown.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 11 } mcmTMclassStatsPktsDiscEmitFail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The number of packets discarded because the \ packet submission to emission queue failed.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 12 } mcmTMclassStatsPktsDiscEmitQueFull OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The number of times an attempt was made to submit \ the frame to emission queue by TM but the emission \ queue was found full.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 13 } mcmTMclassStatsTotalFecnClearRcvd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of frames received with FECN bit \ off for this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 14 } mcmTMclassStatsTotalFecnSetRcvd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of frames received with FECN bit \ set for this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 15 } mcmTMclassStatsTotalBecnRcvd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "NAME = ; DESC = The total number of frames received with BECN bit \ set for this class.; HELP = ; CAPABILITIES = ;" ::= { mcmTMclassStatsEntry 16 } -- *** CONTROL groups/tables *** -- Operational Parameter ("mcm") Groups/Tables (note: no parallel "nvm" objects -- are defined for CONTROL parameters.) -- Traffic Management Control - Counter Reset Table mcmTMcntlCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF McmTMcntlCounterEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "NAME = ; DESC = The Traffic Management Control - Counter \ Reset table.; HELP = This table is used to reset counters in the TM \ Class Statistics table.; CAPABILITIES = NET_OPER, VPN_OPER ;" ::= { tm2-control 1 } mcmTMcntlCounterEntry OBJECT-TYPE SYNTAX McmTMcntlCounterEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "NAME = ; DESC = An entry (specified by port ID and class ID) in the \ Traffic Management Control - Counter Reset table.; HELP = ; CAPABILITIES = ;" INDEX { mcmTMcntlCounterSccNum, mcmTMcntlCounterFRDlciNum, mcmTMcntlCounterMPANLDlciNum } ::= { mcmTMcntlCounterTable 1 } McmTMcntlCounterEntry ::= SEQUENCE { mcmTMcntlCounterSccNum INTEGER, mcmTMcntlCounterFRDlciNum INTEGER, mcmTMcntlCounterMPANLDlciNum INTEGER, mcmTMcntlCounterClassStatsReset INTEGER } mcmTMcntlCounterSccNum OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS obsolete DESCRIPTION "NAME = ; DESC = The WAN physical port number. Used as index to \ TM Control - counter reset table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMcntlCounterEntry 1 } mcmTMcntlCounterFRDlciNum OBJECT-TYPE SYNTAX INTEGER (16..1007) ACCESS read-only STATUS obsolete DESCRIPTION "NAME = ; DESC = The DLCI of the tunneling PVC. Used as index \ to TM Control - counter reset table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMcntlCounterEntry 2 } mcmTMcntlCounterMPANLDlciNum OBJECT-TYPE SYNTAX INTEGER (0..1024) ACCESS read-only STATUS obsolete DESCRIPTION "NAME = ; DESC = The MPANL DLCI identifying the virtual connection. \ Used as index to TM Control - counter reset table.; HELP = ; CAPABILITIES = ;" ::= { mcmTMcntlCounterEntry 3 } mcmTMcntlCounterClassStatsReset OBJECT-TYPE SYNTAX INTEGER { reset (1) } ACCESS write-only STATUS obsolete DESCRIPTION "NAME = ; DESC = The TM Control - Class Statistics counter reset \ action command.; HELP = When set to reset (1), the corresponding indexed \ row of counters in the mcmTMclassStatsTable \ will be zeroed.; CAPABILITIES = ;" ::= { mcmTMcntlCounterEntry 4 } END