LIVINGSTON-PM-GLOBAL-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 DisplayString FROM RFC1213-MIB lucentPMMib FROM LIVINGSTON-ROOT-MIB; -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- The Lucent Globals Group -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ lucentPMGlobal OBJECT IDENTIFIER ::= { lucentPMMib 1} -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- The Lucent Chassis Generic Global Parameters -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ lucentPMGenGlobParams OBJECT IDENTIFIER ::= { lucentPMGlobal 1 } lucentPMGenPriNameSrvr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The primary name server address. The name server allows the machines to be accessed using names instead of the IP addresses." ::= { lucentPMGenGlobParams 1 } lucentPMGenAltNameSrvr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The alternate name server address. The alternate name server takes the responsibilities of the primary name server when the primary name server stops responding." ::= { lucentPMGenGlobParams 3 } lucentPMGenSyslogHost OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The host IP address where the syslog messages are sent." ::= { lucentPMGenGlobParams 4 } lucentPMGenAssignedAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The starting address for a pool of consecutive temporary addresses to be allocated by the PortMaster. This setting enables network login users to use IP addresses from this pool." ::= { lucentPMGenGlobParams 5 } lucentPMGenReportedAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address different from ether0 interface address which is reported to the outside world during PPP or SLIP protocol negotiation. Use this feature, if your site should appear as a single IP address site." ::= { lucentPMGenGlobParams 6 } lucentPMGenNetMask OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The user netmask allows the PortMaster to add routes to dial-in users based on the netmask specified in the netmask object. This seting affects the routing and proxy ARP." ::= { lucentPMGenGlobParams 7 } lucentPMGenNameSvc OBJECT-TYPE SYNTAX INTEGER { none(1), dns(2), nis(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Name service specifies the type of name resolution service used. The possible values are domain name service dns(2) or network information service nis(3). If either of them is not used, then the value of the object is none(1)." ::= { lucentPMGenGlobParams 8 } lucentPMGenDomainName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Domain name of the system. Example xxxxxxx.com, yyyyyyyy.org, zzzzzzzz.edu or ppppppppp.net etc." ::= { lucentPMGenGlobParams 9 } lucentPMGenTelnetPortNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Telnet port number." ::= { lucentPMGenGlobParams 10 } lucentPMGenMaxConsConn OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of console connections." ::= { lucentPMGenGlobParams 11 } lucentPMGenOSPF OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable Open Shortest Path First routing algorithm." ::= { lucentPMGenGlobParams 12 } lucentPMGenBGP OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable Border Gateway Protocol." ::= { lucentPMGenGlobParams 13 } lucentPMGenIPX OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable IPX Protocol." ::= { lucentPMGenGlobParams 14 } lucentPMGenNetBIOS OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable NetBIOS Protocol." ::= { lucentPMGenGlobParams 15 } lucentPMGenCallCheck OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable RADIUS authentication before an ISDN PRI call is accepted. You must configure the RADIUS user entries for this option to work." ::= { lucentPMGenGlobParams 16 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Lucent Radius Management objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ lucentPMRadiusMgmt OBJECT IDENTIFIER ::= { lucentPMGlobal 2 } lucentPMRadiusPriIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the primary RADIUS server." ::= { lucentPMRadiusMgmt 1 } lucentPMRadiusAltIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The alternate IP address of the RADIUS server." ::= { lucentPMRadiusMgmt 2 } lucentPMRadiusPriAcctIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the primary RADIUS accounting server." ::= { lucentPMRadiusMgmt 3 } lucentPMRadiusAltAcctIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the RADIUS alternate accounting server." ::= { lucentPMRadiusMgmt 4 } lucentPMRadiusPriPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port number for the primary RADIUS server." ::= { lucentPMRadiusMgmt 5 } lucentPMRadiusAltPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port number for the alternate RADIUS server." ::= { lucentPMRadiusMgmt 6 } lucentPMRadiusPriAcctPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port number for the primary RADIUS accounting server." ::= { lucentPMRadiusMgmt 7 } lucentPMRadiusAltAcctPort OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The port number for the alternate RADIUS accounting server." ::= { lucentPMRadiusMgmt 8 } lucentPMRadiusAuthFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of radius authentication failures." ::= { lucentPMRadiusMgmt 9 } lucentPMRadiusRetrans OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of times a timeout will occur when communicating with radius." ::= { lucentPMRadiusMgmt 10 } lucentPMRadiusTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum amount of time in seconds we will wait for a RADIUS response before retransmitting." ::= { lucentPMRadiusMgmt 11 } lucentPMRadiusAuth OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Is radius authentication on or off." ::= { lucentPMRadiusMgmt 12 } lucentPMRadiusSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS write-only STATUS mandatory DESCRIPTION "The shared secret between the RADIUS server and client." ::= { lucentPMRadiusMgmt 13 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Lucent ChoiceNet Management objects -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ lucentPMChoiceNetMgmt OBJECT IDENTIFIER ::= { lucentPMGlobal 3 } lucentPMChoiceNetPriIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the primary ChoiceNet server." ::= { lucentPMChoiceNetMgmt 1 } lucentPMChoiceNetAltIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The alternate IP address of the ChoiceNet server." ::= { lucentPMChoiceNetMgmt 2 } lucentPMChoiceNetPriPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port number of the primary ChoiceNet server." ::= { lucentPMChoiceNetMgmt 3 } lucentPMChoiceNetAltPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port number of the alternate ChoiceNet server." ::= { lucentPMChoiceNetMgmt 4 } lucentPMChoiceNetSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) ACCESS write-only STATUS mandatory DESCRIPTION "The shared secret between the ChoiceNet server and client." ::= { lucentPMChoiceNetMgmt 5 } END -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Lucent PortMaster 4 private MIB at a glance -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- pm4mib.mib @(#)pm4mib.mib 1.0 -- Copyright 1991,1997, 1998 Lucent Technologies -- -- pm4mib.mib -- MIB for the PortMaster 4 SNMP Agent -- Release version = 4.0b1 -- -- mib-2 -- lucent -- products -- lucentPM -- lucentPM3 -- lucentPM3Mib -- lucentPM3MibRev -- lucentPM4 -- lucentPM4Mib -- lucentPM4MibRev -- lucentPM4SWRev -- lucentPM4Chassis -- lucentPM4ChasSummary -- lucentPM4ChasCmdTable -- lucentPM4ConfigMgmt -- lucentPM4Interfaces -- lucentPM4SerialInterface -- lucentPM4T1E1Interface -- lucentPM4ModemInterface -- lucentPM4EtherInterface -- lucentPM4FaultMgmt -- lucentPM4FaultIsolation -- lucentPM4FaultMgmtChasTrap -- lucentPM4FMBoardIndex -- lucentPM4FMUnitIndex -- lucentPM4FMUnitType -- lucentPM4FMUnitTrapStatus -- lucentPM4FMTrapSeverity -- lucentPM4FMTrapConfig -- lucentPM4EquipTrapConfig -- lucentPM4T1E1ThreshTrapConfig -- lucentPM4EnvTrapConfig -- lucentPM4PerfMgmt -- lucentPM4PerfMgmtT1E1 -- lucentPM4T1E1PMCur -- lucentPM4T1E1PMInt -- lucentPM4T1E1PMTotal -- lucentPM4PerfMgmtMgrCard -- lucentPM4SecurityMgmt -- lucentPM4AcctMgmt -- lucentPM4SnmpComm -- lucentPM4Traps -- lucentPM4BoardOfflineTrap -- lucentPM4BoardOnlineTrap -- lucentPM4PwrSupFailTrap -- lucentPM4PwrSupWarnTrap -- lucentPM4PwrSupRestoredTrap -- lucentPM4FanFailTrap -- lucentPM4FanRestoredTrap -- lucentPM4BoardTempWarnTrap -- lucentPM4BoardTempNormalTrap -- lucentPM4BoardTooHotTrap -- lucentPM4ModemFailTrap -- lucentPM4T1E1LineDownTrap -- lucentPM4T1E1LineUpTrap -- lucentPM4T1E1LineThreshTrap -- lucentPM4T1E1LineThreshTrap -- lucentPM4BoardPwrOffTrap -- lucentPM4RadiusAuthFailTrap -- -- Modification History -- -------------------- -- -- Pavan Kumar 10/27/98 Revised Draft -- Pavan Kumar 11/03/98 Moved Radius configuration to PM4 Configuration -- subtree Added choicenet and lucent global -- configuration parameters. -- -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++