KENTIX-ROOT-MIB DEFINITIONS ::= BEGIN

IMPORTS
	Counter32, Gauge32, Opaque, Integer32, OBJECT-TYPE, TimeTicks, enterprises, MODULE-IDENTITY, OBJECT-IDENTITY
		FROM SNMPv2-SMI
	TEXTUAL-CONVENTION, DisplayString, TruthValue
		FROM SNMPv2-TC;

kentix MODULE-IDENTITY
	LAST-UPDATED "201702020000Z"
	ORGANIZATION "Kentix GmbH"
	CONTACT-INFO "info@kentix.de"
	DESCRIPTION  "This is an example MIB"

	REVISION "201702020000Z"
	DESCRIPTION
		"Minor improvements/adjustments"

	REVISION "201702010000Z"
	DESCRIPTION
		"This is the original version of a simple example/demonstration
		MIB file for Kentix Gmbh. By: Luciano Lingnau, Paessler AG."

	::= { enterprises 37954 }

universal OBJECT IDENTIFIER
	::= { kentix 10 }

hardware OBJECT IDENTIFIER
	::= { universal 1 }


-- Status definition referenced by all "status" entries
-- The stati are ordered from best to worse
AlarmStatusEnumeration		::= INTEGER {
	ok(1),				-- NMS Alert: Working/Operational/Ok
	notApplicable(2),	-- NMS Alert: Unknown/Not Applicable/Irrelevant 
	other(3),			-- NMS Alert: Other (Warning/Low Level Alert)
	nonCritical(4),		-- NMS Alert: Non-Critical (Iminent Failure, failure covered by redundancy or not critical)
	critical(5)			-- NMS Alert: Critical Error, highest alert level
}

--Start of Objects
--

ambientInfoTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF AmbientInfoEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"This table holds the information about Ambient Sensors,
		Temperature/Humidity"
	::= { universal 1 }

ambientInfoEntry OBJECT-TYPE
	SYNTAX		AmbientInfoEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"An entry in the ambientInfoTable for each of the sensors"
	INDEX		{ ambientInfoIndex }
	::= { ambientInfoTable 1 }

AmbientInfoEntry ::= SEQUENCE {
	ambientInfoIndex			Integer32,
	ambientInfoName				DisplayString,
	ambientInfoTemperatureValue	Integer32,
	ambientInfoHumidityValue	Gauge32,
	ambientInfoDewPointValue	Integer32,
	ambientInfoState			INTEGER
}

ambientInfoIndex OBJECT-TYPE
	SYNTAX		Integer32 (1..2147483647)
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"A unique value, greater than zero, to identify an entry."
	::= { ambientInfoEntry 1 }

ambientInfoName OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of the sensor (Probe1, ProbeExt, etc) - Should be unique
		to guarantee the integrity of the Table" 
	::= { ambientInfoEntry 2 }
	
ambientInfoTemperatureValue OBJECT-TYPE
	SYNTAX		Integer32 (-2000..2000)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current Temperature Reading in tenths of degrees Celsius." 
	::= { ambientInfoEntry 3 }
	
ambientInfoHumidityValue OBJECT-TYPE
	SYNTAX		Gauge32 (0..100)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current Humidity (In percent) Reading" 
	::= { ambientInfoEntry 4 }

ambientInfoDewPointValue OBJECT-TYPE
	SYNTAX		Integer32 (-2000..2000)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current DewPoint Reading in tenths." 
	::= { ambientInfoEntry 5 }
	
ambientInfoState OBJECT-TYPE
	SYNTAX		AlarmStatusEnumeration
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Overall Status as reported by this AmbientInfoEntry" 
	::= { ambientInfoEntry 6 }
	
co2InfoTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF Co2InfoEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"This table holds the information about all the Co2 Sensors."
	::= { universal 2 }

co2InfoEntry OBJECT-TYPE
	SYNTAX		Co2InfoEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"An entry in the co2InfoTable for each of the sensors"
	INDEX		   { co2InfoIndex } 
	::= { co2InfoTable 1 }

Co2InfoEntry ::= SEQUENCE {
	co2InfoIndex			Integer32,
	co2InfoName				DisplayString,
	co2InfoValue			Integer32,
	co2InfoState			INTEGER
}

co2InfoIndex OBJECT-TYPE
	SYNTAX		Integer32 (1..2147483647)
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"A unique value, greater than zero, to identify an entry." 
	::= { co2InfoEntry 1 }
	
co2InfoName OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of the sensor (Probe1, ProbeExt, etc) - Should be unique
		to guarantee the integrity of the Table" 
	::= { co2InfoEntry 2 }

co2InfoValue OBJECT-TYPE
	SYNTAX		Integer32 (-100..100)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current CO Reading." 
	::= { co2InfoEntry 3 }
	
co2InfoState OBJECT-TYPE
	SYNTAX		AlarmStatusEnumeration
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Overall Status as reported by this AmbientInfoEntry" 
	::= { co2InfoEntry 4 }

END -- end of KENTIX-ROOT-MIB