-- ***************************************************************************** -- Juniper-CBF-MIB -- -- Juniper Networks Enterprise MIB -- Extensions for Connection-Based Forwarding Protocol Management -- -- Copyright 2001 Juniper Networks, Inc. All Rights Reserved. -- ***************************************************************************** Juniper-CBF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF juniMibs FROM Juniper-MIBs InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB JuniNextIfIndex FROM Juniper-TC; juniCbfMIB MODULE-IDENTITY LAST-UPDATED "200209162144Z" -- 16-Sep-02 05:44 PM EDT ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Networks, Inc. Postal: 10 Technology Park Drive Westford, MA 01886-3146 USA Tel: +1 978 589 5800 E-mail: mib@Juniper.net" DESCRIPTION "The Connection-Based Forwarding (CBF) Protocol MIB for the Juniper Networks Inc. enterprise." -- Revision History REVISION "200209162144Z" -- 16-Sep-02 05:44 PM EDT - JUNOSe 5.0 DESCRIPTION "Replaced Unisphere names with Juniper names." REVISION "200103301627Z" -- 30-Mar-01 11:27 AM EST - JUNOSe 3.2 DESCRIPTION "Initial version of this MIB module." ::= { juniMibs 52 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Managed objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniCbfObjects OBJECT IDENTIFIER ::= { juniCbfMIB 1 } juniCbfInterface OBJECT IDENTIFIER ::= { juniCbfObjects 1 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- CBF Interface attributes -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- -- IfIndex selection for creating new CBF interfaces -- juniCbfNextIfIndex OBJECT-TYPE SYNTAX JuniNextIfIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Coordinate ifIndex value allocation for entries in juniCbfIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. " ::= { juniCbfInterface 1 } -- -- The CBF Interface Table -- juniCbfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniCbfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for CBF interfaces present in the system." ::= { juniCbfInterface 2 } juniCbfIfEntry OBJECT-TYPE SYNTAX JuniCbfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry describes the characteristics of an CBF interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/juniIfTable." INDEX { juniCbfIfIndex } ::= { juniCbfIfTable 1 } JuniCbfIfEntry ::= SEQUENCE { juniCbfIfIndex InterfaceIndex, juniCbfIfRowStatus RowStatus, juniCbfIfLowerIfIndex InterfaceIndexOrZero } juniCbfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the CBF interface. When creating entries in this table, suitable values for this object are determined by reading juniCbfNextIfIndex." ::= { juniCbfIfEntry 1 } juniCbfIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniCbfIfRowStatus juniCbfIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniCbfIfIndex must have been determined previously, typically by reading juniCbfNextIfIndex. The interface identified by a nonzero juniCbfIfLowerIfIndex must exist. Once created, the following objects may not be modified: juniCbfIfLowerIfIndex A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table." ::= { juniCbfIfEntry 2 } juniCbfIfLowerIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of a media interface over which this CBF interface is to be layered." ::= { juniCbfIfEntry 3 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- CBF connection attributes -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniCbfIfConnTable OBJECT-TYPE SYNTAX SEQUENCE OF JuniCbfIfConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entries for CBF interface connection present in the system." ::= { juniCbfInterface 4 } juniCbfIfConnEntry OBJECT-TYPE SYNTAX JuniCbfIfConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry defines a CBF connection." INDEX { juniCbfIfIngressIfIndex } ::= { juniCbfIfConnTable 1 } JuniCbfIfConnEntry ::= SEQUENCE { juniCbfIfIngressIfIndex InterfaceIndex, juniCbfIfConnRowStatus RowStatus, juniCbfIfEgressIfIndex InterfaceIndex } juniCbfIfIngressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the ingress interface for the CBF connection. When creating entries in this table, suitable values for this object are walking the juniCbfIfTable and picking the appropriate juniCbfIfIndex." ::= { juniCbfIfConnEntry 1 } juniCbfIfConnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniCbfIfRowStatus juniCbfIfIngressIfIndex Once created, the following objects may not be modified: juniCbfIfIngressIfIndex " ::= { juniCbfIfConnEntry 2 } juniCbfIfEgressIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the egress interface for the CBF interface. When creating entries in this table, suitable values for this object are walking the juniCbfIfTable and picking the appropriate juniCbfIfIndex." ::= { juniCbfIfConnEntry 3 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Notifications -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- No notifications are defined in this MIB. Placeholders follow. -- juniCbfTrapControl OBJECT IDENTIFIER ::= { juniCbfMIB 2 } -- juniCbfTraps OBJECT IDENTIFIER ::= { juniCbfMIB 3 } -- juniCbfTrapPrefix OBJECT IDENTIFIER ::= { juniCbfTraps 0 } -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- Conformance information -- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ juniCbfConformance OBJECT IDENTIFIER ::= { juniCbfMIB 4 } juniCbfCompliances OBJECT IDENTIFIER ::= { juniCbfConformance 1 } juniCbfGroups OBJECT IDENTIFIER ::= { juniCbfConformance 2 } -- -- compliance statements -- juniCbfCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Juniper CBF MIB." MODULE -- this module MANDATORY-GROUPS { juniCbfGroup } ::= { juniCbfCompliances 1 } -- -- units of conformance -- juniCbfGroup OBJECT-GROUP OBJECTS { juniCbfNextIfIndex, juniCbfIfRowStatus, juniCbfIfLowerIfIndex, juniCbfIfConnRowStatus, juniCbfIfEgressIfIndex } STATUS current DESCRIPTION "A collection of objects providing management of CBF interfaces in a Juniper product." ::= { juniCbfGroups 1 } END