--  ------------------------------------------------------------------
-- Description : HWMUSA-SHDSL-CO-MIB
-- Author      : Zhufudang
-- Create Date : 2002-12-06
-- Modify Date : 2002-12-06
-- Version     : 1.00
-- Copyright 1985 - 2004 HuaWei Tech, Inc.
--           ALL RIGHTS RESERVED 
-- ------------------------------------------------------------------

	HWMUSA-SHDSL-CO-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			hwProducts			
				FROM HUAWEI-MIB			
			ifIndex			
				FROM IF-MIB			
			OBJECT-TYPE			
				FROM SNMPv2-SMI;
	

		musa OBJECT IDENTIFIER ::= { hwProducts 6 }
		
		ias OBJECT IDENTIFIER ::= { musa 7 }
		
		hwIasService OBJECT IDENTIFIER ::= { ias 4 }
		
		hwMusaShdsl OBJECT IDENTIFIER ::= { hwIasService 4 }
		
		hwShdslCO OBJECT IDENTIFIER ::= { hwMusaShdsl 1 }
		
		shdslPortTypeConfTable OBJECT-TYPE
			SYNTAX SEQUENCE OF ShdslPortTypeConfEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This table supports the configuration of port type in the SLC and SLF board"
			::= { hwShdslCO 1 }
		
		shdslPortTypeConfEntry OBJECT-TYPE
			SYNTAX ShdslPortTypeConfEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"An entry in the shdslPortTypeConfTable.  Each entry 
				represents the shdsl port type.It is indexed by 
				the ifIndex of the associated shdsl port."
			INDEX { ifIndex }
			::= { shdslPortTypeConfTable 1 }
		
		ShdslPortTypeConfEntry ::=
			SEQUENCE { 
				shdslPortTypeConfig
					INTEGER
			 }

		shdslPortTypeConfig OBJECT-TYPE
			SYNTAX INTEGER {
				shdsl-e1(0),
				shdsl-v35(1)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"This object is not allowed to set when the associated port is 
				in service (PVC) or its state is not deactived.When the port is 
				set to a kind of type,its modem cpe interface should be
				the same type as the port.
				"
			::= { shdslPortTypeConfEntry 1 }
		
		shdslPortBindConfTable OBJECT-TYPE
			SYNTAX SEQUENCE OF ShdslPortBindConfEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"This table supports the configuration of port type in the SLC and SLF board"
			::= { hwShdslCO 2 }
		
		shdslPortBindConfEntry OBJECT-TYPE
			SYNTAX ShdslPortBindConfEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION			 " "
			INDEX { shdslPortBindPriPosition }
			::= { shdslPortBindConfTable 1 }
		
		ShdslPortBindConfEntry ::=
			SEQUENCE { 
				shdslPortBindPriPosition
					INTEGER,
				shdslPortBindSlavPosition
					INTEGER,
				shdslPortBindConfig
					INTEGER
			 }
			 
		shdslPortBindPriPosition OBJECT-TYPE
			SYNTAX INTEGER				
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION""
			::= { shdslPortBindConfEntry 1 }
			
			
		shdslPortBindSlavPosition OBJECT-TYPE
			SYNTAX INTEGER				
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION""
			::= { shdslPortBindConfEntry 2 }

		shdslPortBindConfig OBJECT-TYPE
			SYNTAX INTEGER {
				shdsl-port-bind(1),
				shdsl-port-unbind(2)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				""
			::= { shdslPortBindConfEntry 3 }  
			
		hwShdslPortConfTable OBJECT-TYPE
			SYNTAX SEQUENCE OF HwShdslPortConfEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
			 " shdsl port configuration Table

				"
			::= { hwShdslCO 3 }
		
		hwShdslPortConfEntry OBJECT-TYPE
			SYNTAX HwShdslPortConfEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"An entry in the hwShdslPortTable."
			INDEX { ifIndex }
			::= { hwShdslPortConfTable 1 }
		
		HwShdslPortConfEntry ::=
			SEQUENCE { 
				hwShdslPortServiceMode
					INTEGER
			 }

		hwShdslPortServiceMode OBJECT-TYPE
			SYNTAX INTEGER{atm(1),tdm(2)}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION			 ""
			::= { hwShdslPortConfEntry 1 }
		
	
	END