-- ================================================================= -- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. -- -- Description: interface extension mib -- Reference: IF-MIB -- Version: V1.7 -- History: -- V1.0 created by gaolong -- Initial version 2004-11-13 -- V1.1 2007-01-13 Modified by wanglirong -- Add hpnicfIfStatGlobalFlowInterval and hpnicfIfSpeedStatTable -- V1.2 Modified by chenxi -- Add hpnicfRTParentIfTable, hpnicfRTSubIfTable and -- hpnicfIfLinkModeTable 2007-10-15 -- V1.3 2009-05-05 Add hpnicfIfPhysicalNumber, hpnicfIfTable -- V1.4 2009-08-08 Add hpnicfIfMtu, hpnicfIfBandwidth, hpnicfIfDiscardPktRate, -- hpnicfIfExtTrapCfgTable -- V1.5 2010-09-04 Add hpnicfIfInNUcastPkts, hpnicfIfOutNUcastPkts and hpnicfIfStatusKeepTime by shuaixj -- V1.6 2011-09-16 Add hpnicfIfHCFlowStatTable by xiedong -- 2011-11-04 Add hpnicfIfIsPoe by duyanbing -- V1.7 2013-09-13 Added hpnicfIfOperStatus and hpnicfIfDownTimes by duyanbing -- ================================================================= HPN-ICF-IF-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS hpnicfCommon FROM HPN-ICF-OID-MIB ifIndex, ifDescr FROM IF-MIB Integer32, Counter64, Unsigned32, TimeTicks, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI CounterBasedGauge64 FROM HCNUM-TC DisplayString, RowStatus, TruthValue FROM SNMPv2-TC; hpnicfIfExt MODULE-IDENTITY LAST-UPDATED "200905061936Z" -- May 6, 2009 at 19:36 GMT ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detail information. " REVISION "200905061936Z" DESCRIPTION "Update this MIB module." REVISION "200411131936Z" -- December 13, 2004 at 19:36 GMT DESCRIPTION "The initial revision of this MIB module." ::= { hpnicfCommon 40 } -- -- Node definitions -- -- Scalar MIB objects, which are considered as global variables -- to all interfaces in a device, are defined in this section. hpnicfIfExtScalarGroup OBJECT IDENTIFIER ::= { hpnicfIfExt 1 } hpnicfIfStatGlobalFlowInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function." ::= { hpnicfIfExtScalarGroup 1 } -- ================================================================= -- All other groups are defined below. Of course, scalar objects can -- also be defined in a sub section, but they must be one part of -- that sub section. -- Note that a scalar group should be defined firstly and all -- scalar objects are placed under that group when doing so. hpnicfIfExtGroup OBJECT IDENTIFIER ::= { hpnicfIfExt 2 } -- ================================================================= -- The section below describes statistics of interfaces in a device. -- These statistics may not be included in standard MIBs. hpnicfIfStat OBJECT IDENTIFIER ::= { hpnicfIfExtGroup 1 } -- Define a scalar group which consists of all scalar objects used for -- interface statistics. hpnicfIfStatScalarGroup OBJECT IDENTIFIER ::= { hpnicfIfStat 1 } hpnicfIfStatTable OBJECT IDENTIFIER ::= { hpnicfIfStat 2 } hpnicfIfFlowStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfFlowStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to get statistic information of interfaces on a device." ::= { hpnicfIfStatTable 1 } hpnicfIfFlowStatEntry OBJECT-TYPE SYNTAX HpnicfIfFlowStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry items" INDEX { ifIndex } ::= { hpnicfIfFlowStatTable 1 } HpnicfIfFlowStatEntry ::= SEQUENCE { hpnicfIfStatFlowInterval Integer32, hpnicfIfStatFlowInBits Unsigned32, hpnicfIfStatFlowOutBits Unsigned32, hpnicfIfStatFlowInPkts Unsigned32, hpnicfIfStatFlowOutPkts Unsigned32, hpnicfIfStatFlowInBytes Unsigned32, hpnicfIfStatFlowOutBytes Unsigned32 } hpnicfIfStatFlowInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0." ::= { hpnicfIfFlowStatEntry 1 } hpnicfIfStatFlowInBits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "In bits in the specific interval." ::= { hpnicfIfFlowStatEntry 2 } hpnicfIfStatFlowOutBits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out bits in specific interval." ::= { hpnicfIfFlowStatEntry 3 } hpnicfIfStatFlowInPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "In Packets in the specific interval." ::= { hpnicfIfFlowStatEntry 4 } hpnicfIfStatFlowOutPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out packets in the specific interval." ::= { hpnicfIfFlowStatEntry 5 } hpnicfIfStatFlowInBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "In bytes in the specific interval." ::= { hpnicfIfFlowStatEntry 6 } hpnicfIfStatFlowOutBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out bytes in the specific interval." ::= { hpnicfIfFlowStatEntry 7 } -- ================================================================= hpnicfIfSpeedStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfSpeedStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to get average speed information in the specific interval of interfaces on a device." ::= { hpnicfIfStatTable 2 } hpnicfIfSpeedStatEntry OBJECT-TYPE SYNTAX HpnicfIfSpeedStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry items" INDEX { ifIndex } ::= { hpnicfIfSpeedStatTable 1 } HpnicfIfSpeedStatEntry ::= SEQUENCE { hpnicfIfSpeedStatInterval Integer32, hpnicfIfSpeedStatInPkts Unsigned32, hpnicfIfSpeedStatOutPkts Unsigned32, hpnicfIfSpeedStatInBytes Unsigned32, hpnicfIfSpeedStatOutBytes Unsigned32 } hpnicfIfSpeedStatInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0." ::= { hpnicfIfSpeedStatEntry 1 } hpnicfIfSpeedStatInPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of input packets per second in the specific interval by hpnicfIfSpeedStatInterval." ::= { hpnicfIfSpeedStatEntry 2 } hpnicfIfSpeedStatOutPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of output packets per second in the specific interval by hpnicfIfSpeedStatInterval." ::= { hpnicfIfSpeedStatEntry 3 } hpnicfIfSpeedStatInBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of input bytes per second in the specific interval by hpnicfIfSpeedStatInterval." ::= { hpnicfIfSpeedStatEntry 4 } hpnicfIfSpeedStatOutBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of output bytes per second in the specific interval by hpnicfIfSpeedStatInterval." ::= { hpnicfIfSpeedStatEntry 5 } -- ================================================================= hpnicfIfHCFlowStatTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfHCFlowStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to get statistic information of interfaces on a device." ::= { hpnicfIfStatTable 3 } hpnicfIfHCFlowStatEntry OBJECT-TYPE SYNTAX HpnicfIfHCFlowStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry items" INDEX { ifIndex } ::= { hpnicfIfHCFlowStatTable 1 } HpnicfIfHCFlowStatEntry ::= SEQUENCE { hpnicfIfStatFlowHCInBits CounterBasedGauge64, hpnicfIfStatFlowHCOutBits CounterBasedGauge64, hpnicfIfStatFlowHCInPkts CounterBasedGauge64, hpnicfIfStatFlowHCOutPkts CounterBasedGauge64, hpnicfIfStatFlowHCInBytes CounterBasedGauge64, hpnicfIfStatFlowHCOutBytes CounterBasedGauge64 } hpnicfIfStatFlowHCInBits OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "In bits in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBits." ::= { hpnicfIfHCFlowStatEntry 1 } hpnicfIfStatFlowHCOutBits OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Out bits in specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBits." ::= { hpnicfIfHCFlowStatEntry 2 } hpnicfIfStatFlowHCInPkts OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "In Packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInPkts." ::= { hpnicfIfHCFlowStatEntry 3 } hpnicfIfStatFlowHCOutPkts OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Out packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutPkts." ::= { hpnicfIfHCFlowStatEntry 4 } hpnicfIfStatFlowHCInBytes OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "In bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBytes." ::= { hpnicfIfHCFlowStatEntry 5 } hpnicfIfStatFlowHCOutBytes OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Out bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBytes." ::= { hpnicfIfHCFlowStatEntry 6 } -- ================================================================= hpnicfIfControl OBJECT IDENTIFIER ::= { hpnicfIfExtGroup 2 } hpnicfRTParentIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfRTParentIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all interfaces that can create sub interface." ::= { hpnicfIfControl 1 } hpnicfRTParentIfEntry OBJECT-TYPE SYNTAX HpnicfRTParentIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry describes a interface that can create sub interface." INDEX { hpnicfRTParentIfIndex } ::= { hpnicfRTParentIfTable 1} HpnicfRTParentIfEntry ::= SEQUENCE { hpnicfRTParentIfIndex Integer32, hpnicfRTMinSubIfOrdinal Integer32, hpnicfRTMaxSubIfOrdinal Integer32 } hpnicfRTParentIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface." ::= { hpnicfRTParentIfEntry 1 } hpnicfRTMinSubIfOrdinal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum ordinal of the sub interface can be created." ::= { hpnicfRTParentIfEntry 2 } hpnicfRTMaxSubIfOrdinal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max ordinal of the sub interface can be created." ::= { hpnicfRTParentIfEntry 3 } -- ================================================================= hpnicfRTSubIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfRTSubIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by hpnicfRTSubIfParentIfIndex and the hpnicfRTSubIfOrdinal must be in the range between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface from hpnicfRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP." ::= { hpnicfIfControl 2 } hpnicfRTSubIfEntry OBJECT-TYPE SYNTAX HpnicfRTSubIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hpnicfRTSubIfTable entry items" INDEX { hpnicfRTSubIfParentIfIndex, hpnicfRTSubIfOrdinal } ::= { hpnicfRTSubIfTable 1} HpnicfRTSubIfEntry ::= SEQUENCE { hpnicfRTSubIfParentIfIndex Integer32, hpnicfRTSubIfOrdinal Integer32, hpnicfRTSubIfSubIfIndex Integer32, hpnicfRTSubIfSubIfDesc DisplayString, hpnicfRTSubIfRowStatus RowStatus } hpnicfRTSubIfParentIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parent interface index. The value should be the same as the hpnicfRTParentIfIndex." ::= { hpnicfRTSubIfEntry 1 } hpnicfRTSubIfOrdinal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ordinal of sub interface. It should between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface." ::= { hpnicfRTSubIfEntry 2 } hpnicfRTSubIfSubIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the sub interface" ::= { hpnicfRTSubIfEntry 3 } hpnicfRTSubIfSubIfDesc OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the interface" ::= { hpnicfRTSubIfEntry 4 } hpnicfRTSubIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status." ::= { hpnicfRTSubIfEntry 5 } -- ================================================================= hpnicfIfLinkModeTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfLinkModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode." ::= { hpnicfIfControl 3 } hpnicfIfLinkModeEntry OBJECT-TYPE SYNTAX HpnicfIfLinkModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface link mode table entry" INDEX { hpnicfIfLinkModeIndex } ::= { hpnicfIfLinkModeTable 1} HpnicfIfLinkModeEntry ::= SEQUENCE { hpnicfIfLinkModeIndex Integer32, hpnicfIfLinkMode INTEGER, hpnicfIfLinkModeSwitchSupport TruthValue } hpnicfIfLinkModeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value is same as ifIndex." ::= { hpnicfIfLinkModeEntry 1 } hpnicfIfLinkMode OBJECT-TYPE SYNTAX INTEGER { bridgeMode(1), routeMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current link mode of the interface If hpnicfIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface." ::= { hpnicfIfLinkModeEntry 2 } hpnicfIfLinkModeSwitchSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode." ::= { hpnicfIfLinkModeEntry 3 } hpnicfIfInterfaces OBJECT IDENTIFIER ::= { hpnicfIfExtGroup 3 } hpnicfIfPhysicalNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the number of physical interfaces in the device." ::= { hpnicfIfInterfaces 1 } hpnicfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface entries. The number of entries is given by the value of IfNumber." ::= { hpnicfIfInterfaces 2 } hpnicfIfEntry OBJECT-TYPE SYNTAX HpnicfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular interface." INDEX { ifIndex } ::= { hpnicfIfTable 1 } HpnicfIfEntry ::= SEQUENCE { hpnicfIfUpDownTimes Integer32, hpnicfIfMtu Integer32, hpnicfIfBandwidthRate Integer32, hpnicfIfDiscardPktRate Integer32, hpnicfIfStatusKeepTime TimeTicks, hpnicfIfInNUcastPkts Counter64, hpnicfIfOutNUcastPkts Counter64, hpnicfIfIsPoe TruthValue, hpnicfIfOperStatus INTEGER, hpnicfIfDownTimes Integer32 } hpnicfIfUpDownTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's up/down times, since the device was initialized." ::= { hpnicfIfEntry 1 } hpnicfIfMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface." ::= { hpnicfIfEntry 2 } hpnicfIfBandwidthRate OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of the bandwidth for an interface." ::= { hpnicfIfEntry 3 } hpnicfIfDiscardPktRate OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of the discarded packets for an interface." ::= { hpnicfIfEntry 4 } hpnicfIfStatusKeepTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the interface entered its current operational state." ::= { hpnicfIfEntry 5 } hpnicfIfInNUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol." ::= { hpnicfIfEntry 6 } hpnicfIfOutNUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address." ::= { hpnicfIfEntry 7 } hpnicfIfIsPoe OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the interface supports poe." ::= { hpnicfIfEntry 8 } hpnicfIfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to forward packets down(2), testing(3), -- in a test mode admindown(4) -- shutdown by administrator } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hpnicfIfOperStatus should be admindown. If ifAdminStatus is changed to up, hpnicfIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state." ::= { hpnicfIfEntry 9 } hpnicfIfDownTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the interface went down, since the device was initialized." ::= { hpnicfIfEntry 10 } -- -- Notification definitions -- -- ================================================================= -- Traps are defined below. hpnicfIfExtTrap OBJECT IDENTIFIER ::= { hpnicfIfExt 3 } hpnicfIfExtTrapPrex OBJECT IDENTIFIER ::= { hpnicfIfExtTrap 0 } -- All trap definitions should be placed under this object. hpnicfIfBandwidthUsageHigh NOTIFICATION-TYPE OBJECTS { ifDescr, hpnicfIfBandwidthRate, hpnicfIfBandwidthUpperLimit } STATUS current DESCRIPTION "The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit." ::= { hpnicfIfExtTrapPrex 1 } hpnicfIfDiscardPktRateHigh NOTIFICATION-TYPE OBJECTS { ifDescr, hpnicfIfDiscardPktRate, hpnicfIfDiscardPktRateUpperLimit } STATUS current DESCRIPTION "The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit." ::= { hpnicfIfExtTrapPrex 2 } hpnicfIfExtTrapObject OBJECT IDENTIFIER ::= { hpnicfIfExtTrap 1 } hpnicfIfExtTrapCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfIfExtTrapCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The trap configuration table." ::= { hpnicfIfExtTrapObject 1 } hpnicfIfExtTrapCfgEntry OBJECT-TYPE SYNTAX HpnicfIfExtTrapCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for this table." INDEX { ifIndex } ::= { hpnicfIfExtTrapCfgTable 1 } HpnicfIfExtTrapCfgEntry ::= SEQUENCE { hpnicfIfBandwidthUpperLimit Integer32, hpnicfIfDiscardPktRateUpperLimit Integer32 } hpnicfIfBandwidthUpperLimit OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The rate of the bandwidth upper limit for an interface." ::= { hpnicfIfExtTrapCfgEntry 1 } hpnicfIfDiscardPktRateUpperLimit OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The rate of the discarded packets upper limit for an interface." ::= { hpnicfIfExtTrapCfgEntry 2 } END