-- =================================================================
-- Copyright (C) 2004 by H3C TECHNOLOGIES. All rights reserved.
--
-- Description: subnet vlan mib
-- Reference:
-- Version: V1.0
-- History:
--  V1.0 Initial version 2005-08-02
-- =================================================================
HH3C-SUBNET-VLAN-MIB DEFINITIONS ::= BEGIN

IMPORTS
    hh3cCommon
        FROM HH3C-OID-MIB
    OBJECT-GROUP, MODULE-COMPLIANCE
        FROM SNMPv2-CONF
    Integer32, OBJECT-TYPE, MODULE-IDENTITY
        FROM SNMPv2-SMI
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB
    RowStatus
        FROM SNMPv2-TC;


hh3cSubnetVlan MODULE-IDENTITY
    LAST-UPDATED "200508021353Z"
    ORGANIZATION
        "Hangzhou H3C Tech. Co., Ltd."
    CONTACT-INFO
        "Platform Team Hangzhou H3C Tech. Co., Ltd.
        Hai-Dian District Beijing P.R. China
        http://www.h3c.com
        Zip:100085
        "
    DESCRIPTION
        "This MIB contains the objects for managing the subnet-based vlan
        configurations."
    REVISION "200508021353Z"        -- August 02, 2005 at 13:53 GMT
    DESCRIPTION
        "The initial revision of this MIB module."
    ::= { hh3cCommon 61 }

--
-- Textual Conventions
--

--
-- Node definitions
--

hh3cSubnetVlanObjects OBJECT IDENTIFIER ::= { hh3cSubnetVlan 1 }

hh3cSubnetVlanScalarObjects OBJECT IDENTIFIER ::= { hh3cSubnetVlanObjects 1 }

hh3cSubnetNumAllVlan OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of subnet that can be configured on all vlans."
    ::= { hh3cSubnetVlanScalarObjects 1 }

hh3cSubnetNumPerVlan OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of subnet that can be configured on each vlan."
    ::= { hh3cSubnetVlanScalarObjects 2 }

hh3cSubnetNumAllPort OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of subnet that can be applied to all ports."
    ::= { hh3cSubnetVlanScalarObjects 3 }

hh3cSubnetNumPerPort OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of subnet that can be applied to each port."
    ::= { hh3cSubnetVlanScalarObjects 4 }

hh3cSubnetVlanTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cSubnetVlanEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Subnet-based vlan configuration table."
    ::= { hh3cSubnetVlanObjects 2 }

hh3cSubnetVlanEntry OBJECT-TYPE
    SYNTAX Hh3cSubnetVlanEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Subnet-based vlan configuration entry."
    INDEX { hh3cSubnetVlanVlanId, hh3cSubnetVlanSubnetIndex }
    ::= { hh3cSubnetVlanTable 1 }

Hh3cSubnetVlanEntry ::=
    SEQUENCE {
        hh3cSubnetVlanVlanId
            Integer32,
        hh3cSubnetVlanSubnetIndex
            Integer32,
        hh3cSubnetVlanVlanIpAddressType
            InetAddressType,
        hh3cSubnetVlanIpAddressValue
            InetAddress,
        hh3cSubnetVlanNetMaskValue
            InetAddress,
        hh3cSubnetVlanRowStatus
            RowStatus
         }

hh3cSubnetVlanVlanId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Vlan id."
    ::= { hh3cSubnetVlanEntry 1 }

hh3cSubnetVlanSubnetIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The subnet index value of a row in this table is from zero to
         the value of hh3cSubnetNumPerVlan subtracting one."
    ::= { hh3cSubnetVlanEntry 2 }

hh3cSubnetVlanVlanIpAddressType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "There are two kinds of ip address supported by vlan.
         One is ipv4, which is 32 bits.
         The other is ipv6, which is 128 bits."
    ::= { hh3cSubnetVlanEntry 3 }

hh3cSubnetVlanIpAddressValue OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The ip address of the configured subnet on vlan, including ipv4 and ipv6."
    ::= { hh3cSubnetVlanEntry 4 }

hh3cSubnetVlanNetMaskValue OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The net mask of the configured subnet on vlan, including ipv4 and ipv6."
    ::= { hh3cSubnetVlanEntry 5 }

hh3cSubnetVlanRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The row status of this table."
    ::= { hh3cSubnetVlanEntry 6 }


hh3cSubnetVlanPortCreateTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Hh3cSubnetVlanPortCreateEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Subnet-based vlan port table.
        Add all subnet on vlan whose vlan id is hh3cSubnetVlanPortInfoVlanId
        into port at a draught.
        All of the subnet information in this port is from the hh3cSubnetVlanTable
        above, with the value of hh3cSubnetVlanPortInfoVlanId as an index,
        which is hh3cSubnetVlanVlanId in hh3cSubnetVlanTable."
    ::= { hh3cSubnetVlanObjects 3 }

hh3cSubnetVlanPortCreateEntry OBJECT-TYPE
    SYNTAX Hh3cSubnetVlanPortCreateEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Subnet-based vlan port create entry."
    INDEX { hh3cSubnetVlanPortCreateIndex, hh3cSubnetVlanPortCreateVlanId }
    ::= { hh3cSubnetVlanPortCreateTable 1 }

Hh3cSubnetVlanPortCreateEntry ::=
    SEQUENCE {
        hh3cSubnetVlanPortCreateIndex
            Integer32,
        hh3cSubnetVlanPortCreateVlanId
            Integer32,
        hh3cSubnetVlanPortInfoVlanId
            Integer32,
        hh3cSubnetVlanPortRowStatus
            RowStatus
         }

hh3cSubnetVlanPortCreateIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The port index."
    ::= { hh3cSubnetVlanPortCreateEntry  1 }

hh3cSubnetVlanPortCreateVlanId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The subnet-based vlan id.
        hh3cSubnetVlanPortCreateVlanId refers to hh3cSubnetVlanVlanId
        in hh3cSubnetVlanTable.
        If hh3cSubnetVlanPortCreateVlanId has no corresponding entry
        in hh3cSubnetVlanTable, set operation will fail."
    ::= { hh3cSubnetVlanPortCreateEntry  2 }

hh3cSubnetVlanPortInfoVlanId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "This vlaue is the same as the value of hh3cSubnetVlanPortCreateVlanId index.
         All of the subnet information in this port,
         is described on vlan, whose vlan id is the value of hh3cSubnetVlanPortInfoVlanId.
         The vlan id of vlan including subnet information can be gotten here.
         The subnet information can be gotten in the hh3cSubnetVlanTable above."
    ::= { hh3cSubnetVlanPortCreateEntry  3 }

hh3cSubnetVlanPortRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The row status of this table."
    ::= { hh3cSubnetVlanPortCreateEntry  4 }

hh3cSubnetVlanConformance OBJECT IDENTIFIER ::= { hh3cSubnetVlan 2 }


hh3cSubnetVlanCompliances OBJECT IDENTIFIER ::= { hh3cSubnetVlanConformance 1 }


hh3cSubnetVlanCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The compliance statement for subnet vlan MIB."
    MODULE -- this module
        MANDATORY-GROUPS {
                   hh3cSubnetVlanScalarObjectGroup,
                   hh3cSubnetVlanSubnetGroup,
                   hh3cSubnetVlanPortCreateGroup }
    ::= { hh3cSubnetVlanCompliances 1 }


hh3cSubnetVlanGroups OBJECT IDENTIFIER ::= { hh3cSubnetVlanConformance 2 }

hh3cSubnetVlanScalarObjectGroup OBJECT-GROUP
    OBJECTS { hh3cSubnetNumAllVlan,
          hh3cSubnetNumPerVlan,
          hh3cSubnetNumAllPort,
          hh3cSubnetNumPerPort }
    STATUS current
    DESCRIPTION
        "A group of scalar objects describing the maximum number."
    ::= { hh3cSubnetVlanGroups 1 }

hh3cSubnetVlanSubnetGroup OBJECT-GROUP
    OBJECTS { hh3cSubnetVlanVlanIpAddressType,
          hh3cSubnetVlanIpAddressValue,
          hh3cSubnetVlanNetMaskValue,
          hh3cSubnetVlanRowStatus }
    STATUS current
    DESCRIPTION
        "A group of subnet vlan subnet."
    ::= { hh3cSubnetVlanGroups 2 }

hh3cSubnetVlanPortCreateGroup OBJECT-GROUP
    OBJECTS { hh3cSubnetVlanPortInfoVlanId,
          hh3cSubnetVlanPortRowStatus }
    STATUS current
    DESCRIPTION
        "A group of subnet vlan port create table."
    ::= { hh3cSubnetVlanGroups 3 }

END