-- =========================================================================
-- Copyright (C) 2008 by H3C Technologies. All rights reserved.
--
-- Description:This file describes various common MIB objects implemented by both
--             Routers and Switches for use.
-- Reference:
-- Version: V2.2
-- History:
-- V1.0 2004-6-30 Created by MIB standard group
-- V1.1 16th Aug 2004
--      Add a trap node 'hh3cRebootSendTrap' into hh3cSystemNotification
-- V2.0 2004-10-12 updated by gaolong
--      Import from SNMPv2-SMI and SNMPv2-TC instead from RFC1212 and RFC1155-SMI
--      Change ACCESS clauses to MAX-ACCESS
--      Change STATUS clauses from mandatory to current
-- V2.1 2008-11-11 add node hh3cSysBootType by lifengguang
-- V2.2 2009-05-05 add hh3cSysStatisticPeriod, hh3cSysSamplePeriod,
--      hh3cSysTrapResendPeriod, hh3cSysTrapCollectionPeriod, hh3cSysColdStartTrap,
--      hh3cSysWarmStartTrap, hh3cSysSnmpPort, hh3cSysSnmpTrapPort, hh3cSysNetID,
--      hh3cSysLastSampleTime by jinyi
-- =========================================================================
HH3C-COMMON-SYSTEM-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        OBJECT-TYPE, NOTIFICATION-TYPE
            FROM SNMPv2-SMI
        DisplayString, DateAndTime
            FROM SNMPv2-TC
        hh3cSystem
            FROM HH3C-OID-MIB;

-- ==============================
-- Begin define of hh3cmHostName
-- ==============================

    hh3cWriteConfig OBJECT-TYPE
        SYNTAX INTEGER{
                       save(1)
                      }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Write config to router."
        ::= { hh3cSystem 5 }

    hh3cStartFtpServer OBJECT-TYPE
        SYNTAX INTEGER{
                       enable(1),
                       disable(2)
                       }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Decide whether start ftp-server.enable(1) indicates to start ftp-server;
            disable(2) indicates to stop ftp-server."
        ::= { hh3cSystem 6 }

    hh3cReboot OBJECT-TYPE
        SYNTAX INTEGER{
                       reboot(1)
                       }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Reboot router."
        ::= { hh3cSystem 7 }

    hh3cSystemNotification OBJECT IDENTIFIER ::= { hh3cSystem 8 }

    hh3cWriteSuccessTrap NOTIFICATION-TYPE
        STATUS current
        DESCRIPTION
            "send a trap about write success."
        ::= { hh3cSystemNotification 1 }

    hh3cWriteFailureTrap NOTIFICATION-TYPE
        STATUS current
        DESCRIPTION
            "send a trap about write failure."
        ::= { hh3cSystemNotification 2 }

    hh3cRebootSendTrap NOTIFICATION-TYPE
        STATUS current
        DESCRIPTION
            "When users restart the device with command
            'reboot', this trap will be sent two seconds
             before the device reboots."
        ::= { hh3cSystemNotification 3 }

    hh3cSysColdStartTrap NOTIFICATION-TYPE
        STATUS current
        DESCRIPTION
            "A system cold start trap."
        ::= { hh3cSystemNotification 4 }

    hh3cSysWarmStartTrap NOTIFICATION-TYPE
        STATUS current
        DESCRIPTION
            "A system warm start trap."
        ::= { hh3cSystemNotification 5 }

    hh3cSoftwareVersion OBJECT-TYPE
        SYNTAX DisplayString
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Software version."
        ::= { hh3cSystem 9 }

    hh3cSysBootType OBJECT-TYPE
        SYNTAX INTEGER {
            coldStart(1),           -- Cold start
            warmStart(2)            -- Warm start
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The boot type of the system whether the last device reboot was by
            CLI (warm start) or power off (cold start)."
        ::= { hh3cSystem 10 }

    hh3cSystemInfo OBJECT IDENTIFIER ::= { hh3cSystem 11 }

    hh3cSysStatisticPeriod OBJECT-TYPE
        SYNTAX      INTEGER(0..900)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The statistic period. The device collects statistics
             within the period."
        DEFVAL { 0 }
        ::= { hh3cSystemInfo 1 }

    hh3cSysSamplePeriod OBJECT-TYPE
        SYNTAX      INTEGER(0..300)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The sampling period. The device takes samples periodically
             for statistics collection."
        DEFVAL { 0 }
        ::= { hh3cSystemInfo 2 }

    hh3cSysTrapResendPeriod OBJECT-TYPE
        SYNTAX      INTEGER(0..3600)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The trap resending period. If the value is zero, the trap
             will not be re-sent."
        DEFVAL { 0 }
        ::= { hh3cSystemInfo 3 }

    hh3cSysTrapCollectionPeriod OBJECT-TYPE
        SYNTAX      INTEGER(0..60)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The trap collecting period. If the value is zero, the trap
             will not be re-sent."
        DEFVAL { 0 }
        ::= { hh3cSystemInfo 4 }

    hh3cSysSnmpPort OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "UDP port for SNMP protocol entity to receive messages except Trap-PDU."
        ::= { hh3cSystemInfo 5 }

    hh3cSysSnmpTrapPort OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "UDP port for Trap-PDU to receive messages."
        ::= { hh3cSystemInfo 6 }

    hh3cSysNetID OBJECT-TYPE
        SYNTAX      OCTET STRING(SIZE(0..127))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The system Net ID."
        ::= { hh3cSystemInfo 7 }

    hh3cSysLastSampleTime OBJECT-TYPE
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The last sample local time of the system."
        ::= { hh3cSystemInfo 8 }
END