FSCAN-MIB2 DEFINITIONS ::= BEGIN

IMPORTS
    enterprises, MODULE-IDENTITY, Integer32
        FROM SNMPv2-SMI;

fscan MODULE-IDENTITY
    LAST-UPDATED "0609201255Z"
    ORGANIZATION "Sun Microsystems Inc."
    CONTACT-INFO
        "        Sun Microsystems Inc.
       Customer Support
            Postal: 901 San Antonio Road 
       Palo Alto, CA-94303-4900
    USA
                         Tel: 650-960-1300
                E-mail: service@sun.com"
    DESCRIPTION
        "base.modules.fscan:desc"
    ::= { modules 24 }
modules	OBJECT IDENTIFIER ::= { agent 2 }

agent	OBJECT IDENTIFIER ::= { sunsymon 2 }

sunsymon	OBJECT IDENTIFIER ::= { prod 12 }

prod	OBJECT IDENTIFIER ::= { sun 2 }

sun	OBJECT IDENTIFIER ::= { enterprises 42 }


fscanstats	OBJECT IDENTIFIER ::= { fscan 1 }

fileid	OBJECT IDENTIFIER ::= { fscanstats 1 }

RowStatus ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
               "RowStatus"
    SYNTAX       INTEGER {
                     -- the following two values are states:
                     -- these values may be read or written
                     active(1),
                     notInService(2),

                     -- the following value is a state:
                     -- this value may be read, but not written
                     notReady(3),

                     -- the following three values are
                     -- actions: these values may be written,
                     --   but are never read
                     createAndGo(4),
                     createAndWait(5),
                     destroy(6)
                 }

DisplayString ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "255a"
    STATUS       current
    DESCRIPTION
            "Represents textual information taken from the NVT ASCII
            character set, as defined in pages 4, 10-11 of RFC 854.

            To summarize RFC 854, the NVT ASCII repertoire specifies:

              - the use of character codes 0-127 (decimal)

              - the graphics characters (32-126) are interpreted as
                US ASCII

              - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
                meanings specified in RFC 854

              - the other 25 codes have no standard interpretation

              - the sequence 'CR LF' means newline

              - the sequence 'CR NUL' means carriage-return

              - an 'LF' not preceded by a 'CR' means moving to the
                same column on the next line.

              - the sequence 'CR x' for any x other than LF or NUL is
                illegal.  (Note that this also means that a string may
                end with either 'CR LF' or 'CR NUL', but not with CR.)

            Any object defined using this syntax may not exceed 255
            characters in length."
    SYNTAX       OCTET STRING (SIZE (0..255))

filename OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The name of the file"
    ::= { fileid 1 }

scanmode OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The scan mode"
    ::= { fileid 2 }

stime OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The time the agent started scanning the file"
    ::= { fileid 3 }

filestats	OBJECT IDENTIFIER ::= { fscanstats 2 }

mtime OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The time the file was last modified"
    ::= { filestats 1 }

size OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       " bytes"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The size of the file"
    ::= { filestats 2 }

length OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       " lines"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The number of lines in the file"
    ::= { filestats 3 }

lengthrate OBJECT-TYPE
    SYNTAX      DisplayString
    UNITS       " lines/sec"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The number of lines written per second"
    ::= { filestats 4 }

scanTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ScanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    ::= { fscanstats 3 }

scanEntry OBJECT-TYPE
    SYNTAX      ScanEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "MIB tree branch"
    INDEX  { name }
    ::= { scanTable 1 }

ScanEntry ::=
    SEQUENCE {
        rowstatus
            RowStatus,
        name
            DisplayString,
        desc
            DisplayString,
        pattern
            DisplayString,
        state
            DisplayString,
        matches
            Integer32,
        total
            Integer32,
        submatch
            DisplayString
    }

rowstatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The row status"
    ::= { scanEntry 1 }

name OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The pattern name"
    ::= { scanEntry 2 }

desc OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The pattern description"
    ::= { scanEntry 3 }

pattern OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The regular expression pattern"
    ::= { scanEntry 4 }

state OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The state of the pattern"
    ::= { scanEntry 5 }

matches OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The number of matches"
    ::= { scanEntry 6 }

total OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The total number of matches in current file"
    ::= { scanEntry 7 }

submatch OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The sub-match strings in current file"
    ::= { scanEntry 8 }

resetter OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Character string value"
    ::= { fscan 2 }
END