ExtendAirG2 DEFINITIONS ::= BEGIN
    IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Integer32
        FROM SNMPv2-SMI
    RadioSourceT, BandwidthT, ModulationT, 
    RadioTxPwr15gT, BuzTimeoutT, DiplexerConfigG2T, ExaltEnableT, 
    AcmBaseModulationT, AcmTargetModulationT, AcmPolicyT
        FROM ExaltComm
    OBJECT-GROUP
        FROM SNMPv2-CONF
    systemConfig
        FROM ExaltComProducts
    DisplayString
        FROM SNMPv2-TC;

    extendAirG2 MODULE-IDENTITY
        LAST-UPDATED	    "201304261021Z"
        ORGANIZATION	    "Exalt"
        CONTACT-INFO        "Exalt Communication Inc.                     
                            
                            254 E Hacienda Ave.,
                            Campbell, CA 95008
                            USA"
        DESCRIPTION         "This is the Device Specific configuration for
                            the ExtendAirG2 Licensed radio."

        REVISION	    "201304261021Z"
        DESCRIPTION         "This is rev. 1.00"
        ::= { systemConfig 57 }


    extendAirG2TxPower OBJECT-TYPE
        SYNTAX              RadioTxPwr15gT
        UNITS               "Tenths of dBm."
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The Transmit Power level multiplied by 10.0 -<g45><s11>"
        ::= { extendAirG2 1 }

    extendAirG2Bandwidth OBJECT-TYPE
        SYNTAX              BandwidthT
        UNITS               "kHz"
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The RF bandwidth. -<g47><s12 *1>"
        ::= { extendAirG2 2 }

    extendAirG2Modulation OBJECT-TYPE
        SYNTAX              ModulationT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The Mode. -<g52><s14 *1>"
        ::= { extendAirG2 3 }

    extendAirG2TXfrequency OBJECT-TYPE
        SYNTAX              DisplayString (SIZE(2..9))
        UNITS               "MHz"
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The TX Frequency/ -<g46 TX><s15 TX>."
        ::= { extendAirG2 4 }

    extendAirG2RXfrequency OBJECT-TYPE
        SYNTAX              DisplayString (SIZE(2..9))
        UNITS               "MHz"
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The RX Frequency/ -<g46 RX><s15 RX>."
        ::= { extendAirG2 5 }

    extendAirG2DiplexerConfiguration OBJECT-TYPE
        SYNTAX              DiplexerConfigG2T
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The diplexer (label 701-802) configuration/ -<g310><s197>."
        ::= { extendAirG2 6 }

    extendAirG2InsertionLoss OBJECT-TYPE
        SYNTAX              Integer32 (0..200)
        UNITS               "Hundredth dBm"
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "Inserion Loss is applicable for 'OTHER' diplexer entities only/ -<g528><s28 * 100>." 
        ::= { extendAirG2 7 }

    extendAirG2BuzTimeout OBJECT-TYPE
        SYNTAX              BuzTimeoutT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "This sets buzzer timeout period. User Options are: buzzer off, 
	                     10 minutes or 2 hours."
        ::= { extendAirG2 8 }

    extendAirG2AcmMode OBJECT-TYPE
        SYNTAX              ExaltEnableT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "ACM Mode enable/disable."
        ::= { extendAirG2 9 }

    extendAirG2AcmPolicy OBJECT-TYPE
        SYNTAX              AcmPolicyT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The ACM Policy (Conservative/agressive)."
        ::= { extendAirG2 10 }
	                     
    extendAirG2AcmBaseModulation OBJECT-TYPE
        SYNTAX              AcmBaseModulationT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The ACM Base Mode."
        ::= { extendAirG2 11 }

    extendAirG2AcmTargetModulation OBJECT-TYPE
        SYNTAX              AcmTargetModulationT
        MAX-ACCESS          read-write
        STATUS              current
        DESCRIPTION         "The ACM Target Mode."
        ::= { extendAirG2 12 }

END