-- -- EXTREME-SUMMIT-WM-DOT11-EXTNS-MIB.my -- MIB generated by MG-SOFT Visual MIB Builder Version 4.0 Build 349 -- Friday, October 28, 2005 at 15:09:43 -- EXTREME-SUMMIT-WM-DOT11-EXTNS-MIB DEFINITIONS ::= BEGIN IMPORTS summitWMMgmt, summitWMModules FROM EXTREME-SUMMIT-WM-SMI dot11WEPDefaultKeyIndex FROM IEEE802dot11-MIB ifIndex, InterfaceIndex FROM IF-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI MacAddress, TruthValue, RowStatus, DisplayString FROM SNMPv2-TC; -- September 01, 2005 at 02:37 GMT -- September 01, 2005 at 02:37 GMT -- 1.3.6.1.4.1.1916.5.5.3 summitWMDot11ExtnsMIB MODULE-IDENTITY LAST-UPDATED "200510280310Z" -- October 28, 2005 at 03:10 GMT ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Summit WM Dot11 extensions MIB. This module provides extension objects to the ieee80211 MIB." REVISION "200510280310Z" -- October 28, 2005 at 03:10 GMT DESCRIPTION "Initial version." ::= { summitWMModules 3 } -- -- Type definitions -- WEPKeytype ::= OCTET STRING (SIZE (0 | 14 | 38)) -- -- Node definitions -- -- 1.3.6.1.4.1.1916.5.3.1 dot11ExtnsMib OBJECT IDENTIFIER ::= { summitWMMgmt 1 } -- 1.3.6.1.4.1.1916.5.3.1.1 dot11Extsmt OBJECT IDENTIFIER ::= { dot11ExtnsMib 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.1 dot11ExtBSSIDTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11ExtBSSIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dot11ExtBSSIDTable contains a list of the BSS (Basic Service Set) Identifiers supported by each radio, and associates an SSID with with each BSS." ::= { dot11Extsmt 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.1.1 dot11ExtBSSIDEntry OBJECT-TYPE SYNTAX Dot11ExtBSSIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the BSSID table." INDEX { ifIndex, dot11ExtBSSIndex } ::= { dot11ExtBSSIDTable 1 } Dot11ExtBSSIDEntry ::= SEQUENCE { dot11ExtBSSIndex Integer32, dot11ExtBSSID MacAddress, dot11ExtSSIDID Integer32, dot11ExtSSID OCTET STRING, dot11ExtBSSIDWEPKeyIndex Integer32, dot11ExtSSIDSuppress TruthValue, dot11ExtPriorityTrafficHandling TruthValue } -- 1.3.6.1.4.1.1916.5.3.1.1.1.1.1 dot11ExtBSSIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, that identifies each Basic Service Set Identifier (BSSID) supported by a radio." ::= { dot11ExtBSSIDEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.1.1.2 dot11ExtBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Basic Service Set Identifier (BSSID) uniquely identifies a wireless network adapter. In the case of the altitue350, a radio can support up to 8 distinct BSSIDs." ::= { dot11ExtBSSIDEntry 2 } -- 1.3.6.1.4.1.1916.5.3.1.1.1.1.3 dot11ExtSSIDID OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "SSIDID is a Extreme Summit WM internal numeric identifier for the SSID. This number is meaningless external to the product." ::= { dot11ExtBSSIDEntry 3 } -- 1.3.6.1.4.1.1916.5.3.1.1.1.1.4 dot11ExtSSID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Service Set Identifier (SSID) is the network name identifying the wireless network to which this adapter belongs." ::= { dot11ExtBSSIDEntry 4 } -- 1.3.6.1.4.1.1916.5.3.1.1.1.1.5 dot11ExtBSSIDWEPKeyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the WEP default key associated with this BSS from the ieee802dot11 dot11WEPDefaultKeysTable." ::= { dot11ExtBSSIDEntry 5 } -- 1.3.6.1.4.1.1916.5.3.1.1.1.1.6 dot11ExtSSIDSuppress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When True, the radio will not broadcast the SSID associated with this BSSID in the beacons." ::= { dot11ExtBSSIDEntry 6 } -- 1.3.6.1.4.1.1916.5.3.1.1.1.1.7 dot11ExtPriorityTrafficHandling OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When True, priority traffic handling is enabled for this BSSID." ::= { dot11ExtBSSIDEntry 7 } -- 1.3.6.1.4.1.1916.5.3.1.1.2 dot11ExtWEPKeyMappingsTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11ExtWEPKeyMappingsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dot11ExtWEPKeyMappingsTable supports the ability to configure a separate WEP key for each BSS/Station pairing. The WEPKeyMappingValues in this table are logically WRITE-ONLY. Any attempt to read these values will return null or 0." ::= { dot11Extsmt 2 } -- 1.3.6.1.4.1.1916.5.3.1.1.2.1 dot11ExtWEPKeyMappingsEntry OBJECT-TYPE SYNTAX Dot11ExtWEPKeyMappingsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dot11ExtWEPKeyMappingsTable." INDEX { ifIndex, dot11ExtBSSIndex, dot11ExtWEPKeyMappingIndex } ::= { dot11ExtWEPKeyMappingsTable 1 } Dot11ExtWEPKeyMappingsEntry ::= SEQUENCE { dot11ExtWEPKeyMappingIndex Integer32, dot11ExtWEPKeyMappingAddress MacAddress, dot11ExtWEPKeyMappingWEPOn TruthValue, dot11ExtWEPKeyMappingValue WEPKeytype, dot11ExtWEPKeyMappingStatus RowStatus } -- 1.3.6.1.4.1.1916.5.3.1.1.2.1.1 dot11ExtWEPKeyMappingIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the WEP Key Mappings Table." ::= { dot11ExtWEPKeyMappingsEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.2.1.2 dot11ExtWEPKeyMappingAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address of the STA for which the values from this key mapping entry are to be used." ::= { dot11ExtWEPKeyMappingsEntry 2 } -- 1.3.6.1.4.1.1916.5.3.1.1.2.1.3 dot11ExtWEPKeyMappingWEPOn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Boolean as to whether WEP is to be used when communicating with the dot11WEPKeyMappingAddress STA." ::= { dot11ExtWEPKeyMappingsEntry 3 } -- 1.3.6.1.4.1.1916.5.3.1.1.2.1.4 dot11ExtWEPKeyMappingValue OBJECT-TYPE SYNTAX WEPKeytype MAX-ACCESS read-create STATUS current DESCRIPTION "A WEP secret key value." ::= { dot11ExtWEPKeyMappingsEntry 4 } -- 1.3.6.1.4.1.1916.5.3.1.1.2.1.5 dot11ExtWEPKeyMappingStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status column used for creating, modifying, and deleting instances of the columnar objects in the WEP key mapping Table." ::= { dot11ExtWEPKeyMappingsEntry 5 } -- 1.3.6.1.4.1.1916.5.3.1.1.3 dot11CapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11CapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dot11CapabilitiesTable contains the 802.11 protocols that each radio in the accessPoint are capable of supporting." ::= { dot11Extsmt 3 } -- 1.3.6.1.4.1.1916.5.3.1.1.3.1 dot11CapabilitiesEntry OBJECT-TYPE SYNTAX Dot11CapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dot11CapabilitiesTable." INDEX { ifIndex } ::= { dot11CapabilitiesTable 1 } Dot11CapabilitiesEntry ::= SEQUENCE { dot11Capabilities BITS } -- 1.3.6.1.4.1.1916.5.3.1.1.3.1.1 dot11Capabilities OBJECT-TYPE SYNTAX BITS { dot11g(0), dot11a(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Describes the capabilities of a radio, for example the protocol supported." ::= { dot11CapabilitiesEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.4 dot11bConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11bConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains configuration elements specific to the 802.11b protocol." ::= { dot11Extsmt 4 } -- 1.3.6.1.4.1.1916.5.3.1.1.4.1 dot11bConfigEntry OBJECT-TYPE SYNTAX Dot11bConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dot11bConfigTable contains configuration elements specific to the 802.11b protocol. If an attempt to read the elements is made for a radio which does not support 802.11b, null or 0 will be returned." INDEX { ifIndex } ::= { dot11bConfigTable 1 } Dot11bConfigEntry ::= SEQUENCE { dot11bEnabled TruthValue, dot11BasicB INTEGER } -- 1.3.6.1.4.1.1916.5.3.1.1.4.1.1 dot11bEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When true, 802.1b protocol support is active on this radio." ::= { dot11bConfigEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.4.1.2 dot11BasicB OBJECT-TYPE SYNTAX INTEGER { basic11b(1), basic11(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the basic rate set for a 11b or 11b+g radio. When set to basic11b, the radio uses all four 11b rates (1, 2, 5.5 and 11 Mbps) as basic rates. When when set to basic11 the radio uses only the two 11 rates (1 and 2 Mbps) as basic rates." ::= { dot11bConfigEntry 2 } -- 1.3.6.1.4.1.1916.5.3.1.1.5 dot11gConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11gConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dot11gConfigTable contains configuration elements specific to the 802.11g protocol. If an attempt to read the elements is made for a radio which does not support 802.11g, null or 0 will be returned." ::= { dot11Extsmt 5 } -- 1.3.6.1.4.1.1916.5.3.1.1.5.1 dot11gConfigEntry OBJECT-TYPE SYNTAX Dot11gConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dot11gConfigTable." INDEX { ifIndex } ::= { dot11gConfigTable 1 } Dot11gConfigEntry ::= SEQUENCE { dot11gEnabled TruthValue, dot11gProtectionMode INTEGER, dot11gProtectionType INTEGER, dot11gProtectionRate INTEGER, dot11gBasicG INTEGER } -- 1.3.6.1.4.1.1916.5.3.1.1.5.1.1 dot11gEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When true, 802.1g protocol support is active on this radio." ::= { dot11gConfigEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.5.1.3 dot11gProtectionMode OBJECT-TYPE SYNTAX INTEGER { none(1), auto(2), always(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configures whether and when to use Protection Mode for the 802.11g transmissions. Protection Mode helps reduce collisions with legacy 802.11b stations at the expense of additional overhead. None specifies that no protection is to be used. Auto specifies that radio will enable protection mode when it detects an 802.11b station. Always specifies that protection mode is always enabled." ::= { dot11gConfigEntry 3 } -- 1.3.6.1.4.1.1916.5.3.1.1.5.1.4 dot11gProtectionType OBJECT-TYPE SYNTAX INTEGER { ctsOnly(1), rtsCts(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether 802.11g Protection Mode uses a RTS-CTS sequence or a CTS-only protection mechanism when Protection Mode is enabled." ::= { dot11gConfigEntry 4 } -- 1.3.6.1.4.1.1916.5.3.1.1.5.1.5 dot11gProtectionRate OBJECT-TYPE SYNTAX INTEGER { rate1Mbps(0), rate2Mbps(1), rate5Mbps(2), rate11Mbps(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the rate to be used by RTS or CTS in protection mode." ::= { dot11gConfigEntry 5 } -- 1.3.6.1.4.1.1916.5.3.1.1.5.1.6 dot11gBasicG OBJECT-TYPE SYNTAX INTEGER { default(1), basic11(2), basic11b(3), ofdm(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the set of basic rates in 11-g-only mode. Default allows all possible basic rates (1, 2, 5.5, 11, 6, 12 and 24 Mbps). Basic11 specifies only 11 rates (1 nad 2 Mbps) as basic. Basic11b specifies all four 11b rates (1, 2, 5.5 and 11 Mbps) as basic. OFDM specifies only OFDM rates (6, 12 and 24 Mbps) as basic." ::= { dot11gConfigEntry 6 } -- 1.3.6.1.4.1.1916.5.3.1.1.7 dot11ExtSmtTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11ExtSmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extended settings table." ::= { dot11Extsmt 7 } -- 1.3.6.1.4.1.1916.5.3.1.1.7.1 dot11ExtSmtEntry OBJECT-TYPE SYNTAX Dot11ExtSmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Extended settings table dot11ExtSmtTable." INDEX { ifIndex } ::= { dot11ExtSmtTable 1 } Dot11ExtSmtEntry ::= SEQUENCE { smtShortPreambleInvoked INTEGER, dot11ExtSmtCurrentChannel Integer32, dot11ExtSmtMaxBasicRate OCTET STRING, dot11ExtSmtMinBasicRate OCTET STRING, dot11ExtSmtMaxOperationalRate OCTET STRING } -- 1.3.6.1.4.1.1916.5.3.1.1.7.1.1 smtShortPreambleInvoked OBJECT-TYPE SYNTAX INTEGER { shortPreamble(1), longPreamble(2), autoSelectPreamble(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the type of preamble used in an 11b/g radio: always short, always long or automatically selected." ::= { dot11ExtSmtEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.7.1.2 dot11ExtSmtCurrentChannel OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Specfies the current rdio channel." ::= { dot11ExtSmtEntry 2 } -- 1.3.6.1.4.1.1916.5.3.1.1.7.1.3 dot11ExtSmtMaxBasicRate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..126)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum basic rate." ::= { dot11ExtSmtEntry 3 } -- 1.3.6.1.4.1.1916.5.3.1.1.7.1.4 dot11ExtSmtMinBasicRate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..126)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum basic rate which is also the minimum operational rate." ::= { dot11ExtSmtEntry 4 } -- 1.3.6.1.4.1.1916.5.3.1.1.7.1.5 dot11ExtSmtMaxOperationalRate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..126)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum operational rate." ::= { dot11ExtSmtEntry 5 } -- 1.3.6.1.4.1.1916.5.3.1.1.8 dot11ExtVlanSmtTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot11ExtVlanSmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration about bridging mode for the radio." ::= { dot11Extsmt 8 } -- 1.3.6.1.4.1.1916.5.3.1.1.8.1 dot11ExtVlanSmtEntry OBJECT-TYPE SYNTAX Dot11ExtVlanSmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in dot11ExtVlanSmtTable table." INDEX { ifIndex, dot11ExtBSSIndex } ::= { dot11ExtVlanSmtTable 1 } Dot11ExtVlanSmtEntry ::= SEQUENCE { vlanBridgeMode TruthValue, vlanTag Integer32 } -- 1.3.6.1.4.1.1916.5.3.1.1.8.1.1 vlanBridgeMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When true, bridging mode is enabled on this radio." ::= { dot11ExtVlanSmtEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.1.8.1.2 vlanTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Integer specifying the VLAN tag. If untagged, returns -1." ::= { dot11ExtVlanSmtEntry 2 } -- 1.3.6.1.4.1.1916.5.3.1.2 dot11ExtAPObjs OBJECT IDENTIFIER ::= { dot11ExtnsMib 2 } -- 1.3.6.1.4.1.1916.5.3.1.2.2 dot1XConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1XConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Conceptual table for 802.1X settings required for wireless security." ::= { dot11ExtAPObjs 2 } -- 1.3.6.1.4.1.1916.5.3.1.2.2.1 dot1XConfigEntry OBJECT-TYPE SYNTAX Dot1XConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in dot1XConfigTable table." INDEX { ifIndex, dot11ExtBSSIndex } ::= { dot1XConfigTable 1 } Dot1XConfigEntry ::= SEQUENCE { dot1XEnabled TruthValue, dot1XDynamicRekeyingInterval Unsigned32, dot1XWPA1Enabled TruthValue, dot1XWPAPassphrase DisplayString, dot1XWPACipherType INTEGER, dot1XWPA2Enabled TruthValue } -- 1.3.6.1.4.1.1916.5.3.1.2.2.1.1 dot1XEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable 802.1X authentication for this BSSID." ::= { dot1XConfigEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.2.2.1.2 dot1XDynamicRekeyingInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the time period, in seconds, after which the key value must be updated." ::= { dot1XConfigEntry 2 } -- 1.3.6.1.4.1.1916.5.3.1.2.2.1.3 dot1XWPA1Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enables WPA.1 (Wi-Fi Protected Access) on this BSSID" ::= { dot1XConfigEntry 3 } -- 1.3.6.1.4.1.1916.5.3.1.2.2.1.4 dot1XWPAPassphrase OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the WPA passphrase for the BSSID. This element is logically write only. Any attempt to read this element will result in null or 0." ::= { dot1XConfigEntry 4 } -- 1.3.6.1.4.1.1916.5.3.1.2.2.1.5 dot1XWPACipherType OBJECT-TYPE SYNTAX INTEGER { tkipOnly(1), auto(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the encryption algoritms allowed with WPA: only TKIP if tkipOnly or both AES and TKIP if auto." ::= { dot1XConfigEntry 5 } -- 1.3.6.1.4.1.1916.5.3.1.2.2.1.6 dot1XWPA2Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When true, WPA v.2 support is enabled." ::= { dot1XConfigEntry 6 } -- 1.3.6.1.4.1.1916.5.3.1.4 dot11ExtCounters OBJECT IDENTIFIER ::= { dot11ExtnsMib 4 } -- 1.3.6.1.4.1.1916.5.3.1.4.1 assocGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AssocGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "STA statistics table." ::= { dot11ExtCounters 1 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1 assocGroupEntry OBJECT-TYPE SYNTAX AssocGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in the STA statistics table." INDEX { assocAddress } ::= { assocGroupTable 1 } AssocGroupEntry ::= SEQUENCE { assocAddress MacAddress, assocIfIndex InterfaceIndex, assocReceivedRSSI Integer32, assocTransmittedRSSI Integer32, assocReceivedRate Unsigned32, assocTransmittedRate Unsigned32, assocReceivedFrameCount Counter64, assocTransmittedFrameCount Counter64, assocReceiveErrors Counter64, assocTransmitErrors Counter64, assocTransmitBytes Counter64, assocReceiveBytes Counter64 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.1 assocAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address associated with the client." ::= { assocGroupEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.2 assocIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface index of the radio to which the client is associated." ::= { assocGroupEntry 2 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.3 assocReceivedRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received signal strength for the packets received from this client." ::= { assocGroupEntry 3 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.4 assocTransmittedRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received signal strength averaged for the ACK packets received in response to transmitted packets for this client." ::= { assocGroupEntry 4 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.5 assocReceivedRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "PHY rate for the packets received from this client." ::= { assocGroupEntry 5 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.6 assocTransmittedRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "PHY rate used to transmit packets for this client." ::= { assocGroupEntry 6 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.7 assocReceivedFrameCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames received from this client." ::= { assocGroupEntry 7 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.8 assocTransmittedFrameCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames transmitted for this client." ::= { assocGroupEntry 8 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.9 assocReceiveErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames received with errors from this client." ::= { assocGroupEntry 9 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.10 assocTransmitErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames transmitted with errors (not acknowledged) for this cleint." ::= { assocGroupEntry 10 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.11 assocTransmitBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes transmitted for this client." ::= { assocGroupEntry 11 } -- 1.3.6.1.4.1.1916.5.3.1.4.1.1.12 assocReceiveBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes received from this client." ::= { assocGroupEntry 12 } -- 1.3.6.1.4.1.1916.5.3.1.4.2 assocCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF AssocCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "STA association statistics table." ::= { dot11ExtCounters 2 } -- 1.3.6.1.4.1.1916.5.3.1.4.2.1 assocCountersEntry OBJECT-TYPE SYNTAX AssocCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in the STA association statistics table." INDEX { assocAddress } ::= { assocCountersTable 1 } AssocCountersEntry ::= SEQUENCE { assocAuthenticationCount Counter64, assocDeauthenticationCount Counter64, assocAssociationCount Counter64, assocDeassociationCount Counter64, assocReassociationCount Counter64 } -- 1.3.6.1.4.1.1916.5.3.1.4.2.1.1 assocAuthenticationCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of authentications for this client." ::= { assocCountersEntry 1 } -- 1.3.6.1.4.1.1916.5.3.1.4.2.1.2 assocDeauthenticationCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of deauthentications for this client." ::= { assocCountersEntry 2 } -- 1.3.6.1.4.1.1916.5.3.1.4.2.1.3 assocAssociationCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of associations for this client." ::= { assocCountersEntry 3 } -- 1.3.6.1.4.1.1916.5.3.1.4.2.1.4 assocDeassociationCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of deassociations for this client." ::= { assocCountersEntry 4 } -- 1.3.6.1.4.1.1916.5.3.1.4.2.1.5 assocReassociationCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of reassociations for this client." ::= { assocCountersEntry 5 } -- 1.3.6.1.4.1.1916.5.3.1.5 dot11ExtConformance OBJECT IDENTIFIER ::= { dot11ExtnsMib 5 } -- this module -- 1.3.6.1.4.1.1916.5.3.1.5.1 summitWMDot11ExtModule MODULE-COMPLIANCE STATUS current DESCRIPTION "EXTREME-SUMMIT-WM-DOT11-EXTNS module compliance." MODULE -- this module MANDATORY-GROUPS { summitWMDot11ExtGroups } ::= { dot11ExtConformance 1 } -- 1.3.6.1.4.1.1916.5.3.1.5.2 summitWMDot11ExtGroups OBJECT-GROUP OBJECTS { dot11ExtSSIDID, dot11ExtSSID, assocAddress, assocIfIndex, assocReceivedRSSI, assocTransmittedRSSI, assocReceivedRate, assocTransmittedRate, assocReceivedFrameCount, assocTransmittedFrameCount, assocReceiveErrors, assocTransmitErrors, assocAuthenticationCount, assocDeauthenticationCount, assocAssociationCount, assocDeassociationCount, assocReassociationCount, dot11ExtWEPKeyMappingIndex, dot11ExtWEPKeyMappingAddress, dot11ExtWEPKeyMappingWEPOn, dot11ExtWEPKeyMappingValue, dot11ExtWEPKeyMappingStatus, dot11gEnabled, dot11gProtectionMode, dot11gProtectionType, smtShortPreambleInvoked, dot11ExtBSSID, dot11ExtBSSIDWEPKeyIndex, dot11bEnabled, dot11Capabilities, dot11ExtBSSIndex, dot11ExtSSIDSuppress, dot11ExtPriorityTrafficHandling, dot11BasicB, dot11gProtectionRate, vlanBridgeMode, assocReceiveBytes, assocTransmitBytes, dot1XWPA2Enabled, dot1XEnabled, dot1XDynamicRekeyingInterval, dot1XWPA1Enabled, dot1XWPAPassphrase, dot1XWPACipherType, dot11ExtSmtMinBasicRate, dot11ExtSmtMaxBasicRate, vlanTag, dot11ExtSmtMaxOperationalRate, dot11ExtSmtCurrentChannel, dot11gBasicG } STATUS current DESCRIPTION "Extreme summit WM Dot11-Extns object-group." ::= { dot11ExtConformance 2 } END