-------------------------------------------------------------------------------
-- ETERNUS2000 extended-MIB definition for ServerView                        --
-- All Rights Reserved, Copyright FUJITSU LIMITED 2006-2008.                 --
--                                                                           --
-- Modification History :                                                    --
--  v1.0 Initial version                                                     --
--  v1.1 Added traps 22,25 and 26.                                           --
-------------------------------------------------------------------------------
ETERNUS-OR30-SV-MIB DEFINITIONS ::= BEGIN

IMPORTS
    enterprises
        FROM RFC1155-SMI
    DisplayString
        FROM RFC1213-MIB
    OBJECT-TYPE
        FROM RFC-1212
    TRAP-TYPE
        FROM RFC-1215;

fujitsu          OBJECT IDENTIFIER ::= { enterprises 211 }
product          OBJECT IDENTIFIER ::= { fujitsu 1 }
storage          OBJECT IDENTIFIER ::= { product 21 }

nsp              OBJECT IDENTIFIER ::= { storage 1 }
eternusorj       OBJECT IDENTIFIER ::= { nsp 30 }
ssp              OBJECT IDENTIFIER ::= { eternusorj 1 }

application      OBJECT IDENTIFIER ::= { fujitsu 4 }
aplNetwork       OBJECT IDENTIFIER ::= { application 1 }
aplNetDevice     OBJECT IDENTIFIER ::= { aplNetwork 1 }
aplNetStorage    OBJECT IDENTIFIER ::= { aplNetDevice 126 }
aplNetNsp        OBJECT IDENTIFIER ::= { aplNetStorage 1 }
aplNetEternusorj OBJECT IDENTIFIER ::= { aplNetNsp 30 }

--
-- Object Definitions
--
    trapItemId OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This object is used to store the identification number
             of parts for which maintenance is necessary when trap
             is transmitted."
        ::= { eternusorj 7 }

    trapSensorInfo OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This object is used to store detail information of sensor
             when trap is transmitted."
        ::= { eternusorj 8 }

    trapMaintenanceInfo OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This object is used to store detail information of
             maintenance when trap is transmitted."
        ::= { eternusorj 9 }

    trapWarningInfo OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This object is used to store detail messages when trap
             is transmitted."
        ::= { eternusorj 10 }

    trapMessage OBJECT-TYPE
        SYNTAX DisplayString
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This object is used to store detail information of
             warning when trap is transmitted."
        ::= { eternusorj 11 }

    sspMachineId OBJECT-TYPE
        SYNTAX OCTET STRING(SIZE(40))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "This value indicates the identification number of
             this system."
        ::= { ssp 1 }

--
-- Trap Definitions
--
    etOrjConfigChange TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { sspMachineId,trapMessage }
        DESCRIPTION
            "A configChange trap signifies that the sending protocol entity
             recognizes the change in configuration information."
        --#SUMMARY "Configuration changed"
        --#SEVERITY INFORMATIONAL
        ::= 0

    etOrjFirmChange TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { sspMachineId,trapMessage }
        DESCRIPTION
            "A firmChange trap signifies that the exchange of
             the firmware was executed."
        --#SUMMARY "Firmware changed"
        --#SEVERITY INFORMATIONAL
        ::= 1

    etOrjItemFault TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { trapItemId,sspMachineId,trapMessage }
        DESCRIPTION
            "A itemFault trap signifies that device was failed."
        --#SUMMARY "Item fault"
        --#SEVERITY CRITICAL
        ::= 2

    etOrjBatteryExpiration TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { trapItemId,sspMachineId,trapMessage }
        DESCRIPTION
            "A batteryExpiration trap signifies that the exchange time
             of the battery comes."
        --#SUMMARY "Battery expiration"
        --#SEVERITY CRITICAL
        ::= 3

    etOrjRebuildNotStart TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { sspMachineId,trapMessage }
        DESCRIPTION
            "A rebuildNotStart trap signifies that not to be able to
             begin to execute the rebuild because there is no spare disk.
             This trap is not supported."
        --#SUMMARY "Rebuild not started"
        --#SEVERITY CRITICAL
        ::= 4

    etOrjPartBroken TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { trapItemId,sspMachineId,trapMessage,trapWarningInfo }
        DESCRIPTION
            "A partBroken trap signifies that device was partially Broken."
        --#SUMMARY "Partially broken"
        --#SEVERITY CRITICAL
        ::= 5

    etOrjSensorStatusChange TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { trapItemId,sspMachineId,trapSensorInfo,trapMessage }
        DESCRIPTION
            "A sensorStatusChange trap signifies that environment sensor 
             status changes."
        --#SUMMARY "Sensor status changed"
        --#SEVERITY CRITICAL
        ::= 6

    etOrjMaintenanceInfo TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { sspMachineId,trapMaintenanceInfo,trapMessage }
        DESCRIPTION
            "A maintenanceInfo trap signifies that maintenance
             information."
        --#SUMMARY "Maintenance required"
        --#SEVERITY CRITICAL
        ::= 7

    etOrjItemFaultToNormal TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { trapItemId,sspMachineId,trapMessage }
        DESCRIPTION
            "A itemFaultToNormal trap signifies that the device state has
             changed to normal after sending itemFault trap."
        --#SUMMARY "Item fault to normal"
        --#SEVERITY INFORMATIONAL
        ::= 22

    etOrjPartBrokenToNormal TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { trapItemId,sspMachineId,trapMessage,trapWarningInfo }
        DESCRIPTION
            "A partBrokenToNormal trap signifies that the device state has
             changed to normal after sending PartBroken trap."
        --#SUMMARY "Partially broken to normal"
        --#SEVERITY INFORMATIONAL
        ::= 25

    etOrjSensorStatusChangeToNormal TRAP-TYPE
        ENTERPRISE      aplNetEternusorj
        VARIABLES       { trapItemId,sspMachineId,trapSensorInfo,trapMessage }
        DESCRIPTION
            "A sensorStatusChangeToNormal trap signifies that the error or 
             warning state detected by the environment sensor has returned 
             to normal after sending SensorStatusChange trap."
        --#SUMMARY "Sensor status changed to normal"
        --#SEVERITY INFORMATIONAL
        ::= 26

END