-- *****************************************************************
-- ERICSSON-ROUTER-ALARMIO-MIB
--
-- Copyright (c) 2015 Ericsson AB.
-- All rights reserved.
--
-- *****************************************************************

 ERICSSON-ROUTER-ALARMIO-MIB DEFINITIONS ::= BEGIN

     IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, NOTIFICATION-TYPE,
    mib-2, Counter32, Integer32, TimeTicks,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DisplayString, DateAndTime
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    ItuPerceivedSeverity
        FROM ITU-ALARM-TC-MIB
    eriRouterMgmt
        FROM ERICSSON-ROUTER-SMI;

 --  Alarmio MIB

 eriRouterAlarmioMib MODULE-IDENTITY
     LAST-UPDATED "201506300000Z"  -- 30 Jun, 2015
     ORGANIZATION "Ericsson AB"
     CONTACT-INFO
         "David Xia
         Email: David.Xia@ericsson.com"
     DESCRIPTION
         "Alarmio is physical connector held external IOs. This module is product specific.
          It's only used in Spitfire series products.
          It holds some input pins(ports) and output pins(ports).
          The input ports are connected with other devices and used to accept signal from them.
          Alarms are trapped when signal detected.
          The output ports are connected with other devices and used to send out signal to them.
          When critical or major alarms are detected, signal will be sent out by these ports.
          Detailed usage is product specific."

     REVISION "201506300000Z"
     DESCRIPTION
         "Initial revision."

     ::= { eriRouterMgmt 108 }

 -- Alarmio table

 eriRouterAlarmioAlarmActiveTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF EriRouterAlarmioAlarmActiveEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A list of alarmio active alarm entries."
     ::= { eriRouterAlarmioMib 1 }

 eriRouterAlarmioAlarmActiveEntry OBJECT-TYPE
     SYNTAX     EriRouterAlarmioAlarmActiveEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A collection of alarmio active alarm info."
     INDEX { eriRouterAlarmioPortId, eriRouterAlarmioAlarmActiveIndex }
     ::= { eriRouterAlarmioAlarmActiveTable 1 }

 EriRouterAlarmioAlarmActiveEntry ::= SEQUENCE {
     eriRouterAlarmioPortId                        Unsigned32,
     eriRouterAlarmioAlarmActiveIndex              Unsigned32,
     eriRouterAlarmioAlarmSeverity                 ItuPerceivedSeverity,
     eriRouterAlarmioDescription                   DisplayString,
     eriRouterAlarmioAlarmDateAndTime              DateAndTime
 }

 eriRouterAlarmioPortId OBJECT-TYPE
     SYNTAX     Unsigned32 (1..3)
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The value of this object contains the alarmio's port id."
     ::= { eriRouterAlarmioAlarmActiveEntry 1 }

 eriRouterAlarmioAlarmActiveIndex OBJECT-TYPE
     SYNTAX     Unsigned32 (1..65535)
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The value of this object uniquely identifies this
         alarmio entry."
     ::= { eriRouterAlarmioAlarmActiveEntry 2 }


 eriRouterAlarmioAlarmSeverity OBJECT-TYPE
     SYNTAX     ItuPerceivedSeverity
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The value of this object contains the alarmio alarm's severity."
     ::= { eriRouterAlarmioAlarmActiveEntry 3 }

 eriRouterAlarmioDescription OBJECT-TYPE
     SYNTAX     DisplayString
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The value of this object contains the alarmio's description."
     ::= { eriRouterAlarmioAlarmActiveEntry 4 }

 eriRouterAlarmioAlarmDateAndTime OBJECT-TYPE
     SYNTAX     DateAndTime
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The value of this object contains the alarmio alarm's trigger time."
     ::= { eriRouterAlarmioAlarmActiveEntry 5 }

 -- Alarmio notification(s) trap
 eriRouterAlarmioAlarm NOTIFICATION-TYPE
     OBJECTS  { eriRouterAlarmioAlarmActiveIndex,
                eriRouterAlarmioPortId,
                eriRouterAlarmioAlarmSeverity,
                eriRouterAlarmioDescription,
                eriRouterAlarmioAlarmDateAndTime}
     STATUS   current
     DESCRIPTION
         "This notification is triggered when a alarmio input alarm is triggered."
     ::= { eriRouterAlarmioMib 2 }

 END