-- Version 2.15.1.1, modified 2001-05-31 17:27:43-04 DC-OPT-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, Gauge, enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- Codex MIB Group definitions codex OBJECT IDENTIFIER ::= { enterprises 449 } cdxProductSpecific OBJECT IDENTIFIER ::= { codex 2 } cdx6500 OBJECT IDENTIFIER ::= { cdxProductSpecific 1 } cdx6500Statistics OBJECT IDENTIFIER ::= { cdx6500 3 } cdx6500StatOtherStatsGroup OBJECT IDENTIFIER ::= { cdx6500Statistics 2 } cdx6500Controls OBJECT IDENTIFIER ::= { cdx6500 4 } -- Textual Conventions DisplayString ::= OCTET STRING -- Statistics objects cdx6500DCStatTable OBJECT IDENTIFIER ::= { cdx6500StatOtherStatsGroup 10 } -- General Statistics objects cdx6500DCGenStatTable OBJECT IDENTIFIER ::= { cdx6500DCStatTable 1 } cdx6500DCGenStatTableEntry OBJECT IDENTIFIER ::= { cdx6500DCGenStatTable 1 } cdx6500DCGenStatDSPStatus OBJECT-TYPE SYNTAX INTEGER { down (1), up (2), missing (3) } ACCESS read-only STATUS mandatory DESCRIPTION "This parameter specifies the current status/existence of the DC SIMM/DSP on the motherboard. up - DC SIMM/DSP is installed and operational. down - DC SIMM/DSP is non-functional. missing - DC SIMM/DSP is missing." ::= { cdx6500DCGenStatTableEntry 1 } cdx6500DCGenStatHndlrSWRev OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This parameter displays the DC Handler Software Revision Number." ::= { cdx6500DCGenStatTableEntry 2 } cdx6500DCGenStatFnctnSWRev OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "DC Function Revision number. For example, revision number of DSP firmware." ::= { cdx6500DCGenStatTableEntry 3 } cdx6500DCGenStatMaxChannels OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Number of DC Channels supported." ::= { cdx6500DCGenStatTableEntry 4 } cdx6500DCGenStatChanInUse OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Number of DC Channels in use." ::= { cdx6500DCGenStatTableEntry 5 } cdx6500DCGenStatMaxSmltChanUse OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of DC Channels in use simultaneously since the last stats reset." ::= { cdx6500DCGenStatTableEntry 6 } cdx6500DCGenStatRejectConn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of call requests rejected due to the unavailability of DC channels." ::= { cdx6500DCGenStatTableEntry 7 } cdx6500DCGenStatAggCRatio OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Ratio of total number of incoming charactersfor all DC channels to total number of outgoing characters for all channels, for the past minute." ::= { cdx6500DCGenStatTableEntry 8 } cdx6500DCGenStatCurrEncQDepth OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Current number of frames in the encoder queue, waiting to be compressed." ::= { cdx6500DCGenStatTableEntry 9 } cdx6500DCGenStatMaxEncQDepth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of frames that were on the encoder queue since the last stats reset." ::= { cdx6500DCGenStatTableEntry 10 } cdx6500DCGenStatTmOfMaxEncQDepth OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Time when the maximum Encoder Queue Depth is reached." ::= { cdx6500DCGenStatTableEntry 11 } cdx6500DCGenStatCurrDecQDepth OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Current number of frames in the decoder queue, waiting to be decompressed." ::= { cdx6500DCGenStatTableEntry 12 } cdx6500DCGenStatMaxDecQDepth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of frames that were on the decoder queue waiting to be decompressed." ::= { cdx6500DCGenStatTableEntry 13 } cdx6500DCGenStatTmOfMaxDecQDepth OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Time when the maximum Decoder Queue Depth is reached." ::= { cdx6500DCGenStatTableEntry 14 } -- Channel Statistics objects cdx6500DCChanStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500DCChanStatTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Data Compression Channel Statistics Table." ::= { cdx6500DCStatTable 2 } cdx6500DCChanStatTableEntry OBJECT-TYPE SYNTAX Cdx6500DCChanStatTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in this table pertains to the Data Compression Channel statistics." INDEX { cdx6500DCChanStatChanNum } ::= { cdx6500DCChanStatTable 1 } Cdx6500DCChanStatTableEntry ::= SEQUENCE { cdx6500DCChanStatChanNum INTEGER, cdx6500DCChanStatTmOfLastStatRst DisplayString, cdx6500DCChanStatChanState INTEGER, cdx6500DCChanStatSourceChan DisplayString, cdx6500DCChanStatDestChan DisplayString, cdx6500DCChanStatXmitCRatio DisplayString, cdx6500DCChanStatNumOfEncFrames Counter, cdx6500DCChanStatNumOfCharInToEnc Counter, cdx6500DCChanStatNumOfCharOutOfEnc Counter, cdx6500DCChanStatNumOfDecFrames Counter, cdx6500DCChanStatNumOfCharInToDec Counter, cdx6500DCChanStatNumOfCharOutOfDec Counter, cdx6500DCChanStatEncAETrnstnCnt Counter, cdx6500DCChanStatEncAEFrameCnt Counter, cdx6500DCChanStatEncAEModeStatus INTEGER, cdx6500DCChanStatDecAETrnstnCnt Counter, cdx6500DCChanStatDecAEFrameCnt Counter, cdx6500DCChanStatDecAEModeStatus INTEGER, cdx6500DCChanStatDSWithBadFrames Counter, cdx6500DCChanStatDSWithBadHeaders Counter, cdx6500DCChanStatDSDueToRstOrCng Counter } cdx6500DCChanStatChanNum OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Channel number whose statistics were requested." ::= { cdx6500DCChanStatTableEntry 1 } cdx6500DCChanStatTmOfLastStatRst OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Time when the node restarted or the stats reset by CTP/SNMP Manager command." ::= { cdx6500DCChanStatTableEntry 2 } cdx6500DCChanStatChanState OBJECT-TYPE SYNTAX INTEGER { dspDown (1), idle (2), negotiating (3), dataPassing (4), flushingData (5), flushingDCRing (6), apClearing (7), npClearing (8), clearingCall (9), flushingOnClr (10), clearing (11) } ACCESS read-only STATUS mandatory DESCRIPTION "Activity state of the DC channel. dspDown - DSP is down. idle - DSP is ready to be assigned to a connection. negotiating - Source has accepted the Call Request and is waiting for a Call Accept from the destination node. dataPassing - Normal data passing state. apClearing - Call Clear request arrived from access side. npClearing - Call Clear request arrived from network side. clearingCall - A call collision or a Call Clear along with a X.25 reset or a `start buffer discarding'. flushingOnClr - Call has been cleared with FLUSH, waiting packets to flush from DC Handler rings. flushingData - Waiting for x25 confirm. flushingDCRing - Waiting for the data on the DC Handler ring to be flushed after a x.25 confirm or stop discard. clearing - Call has been cleared." ::= { cdx6500DCChanStatTableEntry 3 } cdx6500DCChanStatSourceChan OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Access Protocol's identity string." ::= { cdx6500DCChanStatTableEntry 4 } cdx6500DCChanStatDestChan OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Network Protocol's identity string." ::= { cdx6500DCChanStatTableEntry 5 } cdx6500DCChanStatXmitCRatio OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Actual compression ratio for outgoing data. This is a 60 second snapshot. Range is 1 - 9.2" ::= { cdx6500DCChanStatTableEntry 6 } cdx6500DCChanStatNumOfEncFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames received from the Access Protocol to be compressed." ::= { cdx6500DCChanStatTableEntry 7 } cdx6500DCChanStatNumOfCharInToEnc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes pushed into the encoder to be compressed." ::= { cdx6500DCChanStatTableEntry 8 } cdx6500DCChanStatNumOfCharOutOfEnc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of compressed bytes produced by the encoder." ::= { cdx6500DCChanStatTableEntry 9 } cdx6500DCChanStatNumOfDecFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of frames received from the Network Protocol to be decompressed." ::= { cdx6500DCChanStatTableEntry 10 } cdx6500DCChanStatNumOfCharInToDec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of bytes pushed into the decoder to be decompressed." ::= { cdx6500DCChanStatTableEntry 11 } cdx6500DCChanStatNumOfCharOutOfDec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of decompressed bytes produced by the decoder." ::= { cdx6500DCChanStatTableEntry 12 } cdx6500DCChanStatEncAETrnstnCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the encoder switched from compressed mode to anti-expansion mode." ::= { cdx6500DCChanStatTableEntry 13 } cdx6500DCChanStatEncAEFrameCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of anti-expansion frames sent by the encoder." ::= { cdx6500DCChanStatTableEntry 14 } cdx6500DCChanStatEncAEModeStatus OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Anti Expansion mode Status for Encoder : on - Data Compression is in the anti expansion mode. off - Data Compression is out of the anti expansion mode." ::= { cdx6500DCChanStatTableEntry 15 } cdx6500DCChanStatDecAETrnstnCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the decoder switched from compressed mode to anti-expansion mode." ::= { cdx6500DCChanStatTableEntry 16 } cdx6500DCChanStatDecAEFrameCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of anti-expansion frames received by the decoder." ::= { cdx6500DCChanStatTableEntry 17 } cdx6500DCChanStatDecAEModeStatus OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Anti Expansion mode Status for Decoder : on - Data Compression is in the anti expansion mode. off - Data Compression is out of the anti expansion mode." ::= { cdx6500DCChanStatTableEntry 18 } cdx6500DCChanStatDSWithBadFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of decoded frames detected by the decoder to have been corrupted. This includes frames with bad headers." ::= { cdx6500DCChanStatTableEntry 19 } cdx6500DCChanStatDSWithBadHeaders OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of decoded frames detected by the decoder to have a bad header." ::= { cdx6500DCChanStatTableEntry 20 } cdx6500DCChanStatDSDueToRstOrCng OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets discarded while processing a X.25 reset or during node congestion." ::= { cdx6500DCChanStatTableEntry 21 } -- Control objects cdx6500ContDC OBJECT IDENTIFIER ::= { cdx6500Controls 9 } cdx6500ContResetAllDCStats OBJECT-TYPE SYNTAX INTEGER { reset (1), noreset (2) } ACCESS write-only STATUS mandatory DESCRIPTION "Reset the DC Statistics for all channels." ::= { cdx6500ContDC 1 } cdx6500ContDCTable OBJECT-TYPE SYNTAX SEQUENCE OF Cdx6500ContDCTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "These resets require the channel number as the index." ::= { cdx6500ContDC 2 } cdx6500ContDCTableEntry OBJECT-TYPE SYNTAX Cdx6500ContDCTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry represents a control parameter used to reset Channel Statistics or Channel Vocabulary." INDEX { cdx6500ContDCChanNum } ::= { cdx6500ContDCTable 1 } Cdx6500ContDCTableEntry ::= SEQUENCE { cdx6500ContDCChanNum INTEGER, cdx6500ContResetDCChanStats INTEGER, cdx6500ContResetDCChanVocab INTEGER } cdx6500ContDCChanNum OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Channel number used as the index." ::= { cdx6500ContDCTableEntry 1 } cdx6500ContResetDCChanStats OBJECT-TYPE SYNTAX INTEGER { reset (1), noreset (2) } ACCESS write-only STATUS mandatory DESCRIPTION "Reset the DC Statistics for this channel." ::= { cdx6500ContDCTableEntry 2 } cdx6500ContResetDCChanVocab OBJECT-TYPE SYNTAX INTEGER { reset (1), noreset (2) } ACCESS write-only STATUS mandatory DESCRIPTION "Reset the vocabulary/history buffer for this channel if this channel number is active." ::= { cdx6500ContDCTableEntry 3 } END