CISCOSB-STACK-MIB DEFINITIONS ::= BEGIN -- Title: CISCOSB LOCALIZATION ROS -- This Private MIB supports the unit id configuration for stack of ROS products -- Version: 7.40 -- Date: 21 Nov 2005 -- 23-May-2012 Update unit id from 4 to 8 units maximum -- 19-Dec-2012 Support Lion Native and advanced-hybrid-xg -- -- 01-Nov-2005 Add rlStackUnitMacAddressAfterReset -- 21-Nov-2005 Change range of rlStackActiveUnitIdAfterReset -- 21 mar 2011 In version 7.50, unit id configuration for hybrid stack -- 10 Oct 2011 Add port-speed-down IMPORTS MacAddress FROM BRIDGE-MIB switch001 FROM CISCOSB-MIB OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; rlStack MODULE-IDENTITY LAST-UPDATED "200504140000Z" ORGANIZATION "Cisco Small Business" CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Home http://www.cisco.com/smb>;, Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for stack." REVISION "200504140000Z" DESCRIPTION "Initial revision." ::= { switch001 107 } StackMode ::= INTEGER { standalone (1), native (2), basic-hybrid (3), advanced-hybrid (4), advanced-hybrid-XG (5) } PortsPair ::= INTEGER { pair-s1s2 (1), pair-s3s4 (2), pair-s1s25G (3), pair-s1s2Xg (4), pair-lionXg (5) } HybridStackPortSpeed ::= INTEGER { port-speed-1G (1), port-speed-5G (2), port-speed-10G (3), port-speed-auto (4), port-speed-down (5) } HybridStackDeviceMode ::= INTEGER { mode-L2 (1), mode-L3 (2) } rlStackActiveUnitIdTable OBJECT-TYPE SYNTAX SEQUENCE OF RlStackActiveUnitIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table listing the active unit id of the requested unit." ::= {rlStack 1 } rlStackActiveUnitIdEntry OBJECT-TYPE SYNTAX RlStackActiveUnitIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the rlStackActiveUnitIdTable." INDEX {rlStackCurrentUnitId } ::= {rlStackActiveUnitIdTable 1 } RlStackActiveUnitIdEntry ::= SEQUENCE { rlStackCurrentUnitId INTEGER, rlStackActiveUnitIdAfterReset INTEGER } rlStackCurrentUnitId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unit number device, which is the active unit id" ::= {rlStackActiveUnitIdEntry 1 } rlStackActiveUnitIdAfterReset OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the unit id that will be after reset." ::= {rlStackActiveUnitIdEntry 2 } rlStackUnitModeAfterReset OBJECT-TYPE SYNTAX INTEGER { standalone(1), stack(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "set unit type that will be after reset, standalone or stack." ::= {rlStack 2 } rlStackUnitMode OBJECT-TYPE SYNTAX INTEGER { standalone(1), stack(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "show unit type standalone or stack." ::= {rlStack 3 } rlStackUnitMacAddressAfterReset OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used by this bridge after rest." REFERENCE "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5" ::= { rlStack 4 } rlStackHybridTable OBJECT-TYPE SYNTAX SEQUENCE OF RlStackHybridEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table listing information required for hybrid stack." ::= {rlStack 5 } rlStackHybridEntry OBJECT-TYPE SYNTAX RlStackHybridEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the rlStackActiveUnitIdTable." INDEX {rlStackHybridUnitId } ::= {rlStackHybridTable 1 } RlStackHybridEntry ::= SEQUENCE { rlStackHybridUnitId INTEGER, rlStackHybridStackMode StackMode, rlStackHybridPortsPair PortsPair, rlStackHybridPortNo1speed HybridStackPortSpeed, rlStackHybridPortNo2speed HybridStackPortSpeed, rlStackHybridUnitIdAfterReset INTEGER, rlStackHybridStackModeAfterReset StackMode, rlStackHybridPortsPairAfterReset PortsPair, rlStackHybridPortNo1speedAfterReset HybridStackPortSpeed, rlStackHybridPortNo2speedAfterReset HybridStackPortSpeed, rlStackHybridDeleteStartupAfterReset TruthValue, rlStackHybridDeviceModeAfterReset HybridStackDeviceMode, rlStackHybridXgPortNo1Num INTEGER, rlStackHybridXgPortNo1NumAfterReset INTEGER, rlStackHybridXgPortNo2Num INTEGER, rlStackHybridXgPortNo2NumAfterReset INTEGER } rlStackHybridUnitId OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unit number device, which is the active unit id" ::= {rlStackHybridEntry 1 } rlStackHybridStackMode OBJECT-TYPE SYNTAX StackMode MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the unit stack mode." ::= {rlStackHybridEntry 2 } rlStackHybridPortsPair OBJECT-TYPE SYNTAX PortsPair MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the PortsPair." ::= {rlStackHybridEntry 3 } rlStackHybridPortNo1speed OBJECT-TYPE SYNTAX HybridStackPortSpeed MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rlStackHybridPortNo1speed." ::= {rlStackHybridEntry 4 } rlStackHybridPortNo2speed OBJECT-TYPE SYNTAX HybridStackPortSpeed MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rlStackHybridPortNo2speed." ::= {rlStackHybridEntry 5 } rlStackHybridUnitIdAfterReset OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the unit id that will be after reset." ::= {rlStackHybridEntry 6 } rlStackHybridStackModeAfterReset OBJECT-TYPE SYNTAX StackMode MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the unit stack mode that will be after reset." ::= {rlStackHybridEntry 7 } rlStackHybridPortsPairAfterReset OBJECT-TYPE SYNTAX PortsPair MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the PortsPair that will be after reset." ::= {rlStackHybridEntry 8 } rlStackHybridPortNo1speedAfterReset OBJECT-TYPE SYNTAX HybridStackPortSpeed MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the HybridStackPortSpeed that will be after reset." ::= {rlStackHybridEntry 9 } rlStackHybridPortNo2speedAfterReset OBJECT-TYPE SYNTAX HybridStackPortSpeed MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the HybridStackPortSpeed that will be after reset." ::= {rlStackHybridEntry 10 } rlStackHybridDeleteStartupAfterReset OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the startup configuration is deleted after reset." ::= {rlStackHybridEntry 11 } rlStackHybridDeviceModeAfterReset OBJECT-TYPE SYNTAX HybridStackDeviceMode MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates Device mode (Layer2 or Layer3) after reset." ::= {rlStackHybridEntry 12 } rlStackHybridXgPortNo1Num OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 1st stack cascade active port number." ::= {rlStackHybridEntry 13 } rlStackHybridXgPortNo1NumAfterReset OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the 1st stack cascade port number that will be after reset." ::= {rlStackHybridEntry 14 } rlStackHybridXgPortNo2Num OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 2nd stack cascade active port number." ::= {rlStackHybridEntry 15 } rlStackHybridXgPortNo2NumAfterReset OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the 2nd stack cascade port number that will be after reset." ::= {rlStackHybridEntry 16 } END