-- MIB file created 27-Jul-2010 07:27:50, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-INTERFACE-XCVR-MONITOR-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-INTERFACE-XCVR-MONITOR-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    ifName
            FROM IF-MIB
    ciscoMgmt
            FROM CISCO-SMI
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

ciscoInterfaceXcvrMonitorMIB OBJECT IDENTIFIER ::= { ciscoMgmt 706 }
-- MODULE-IDENTITY
--  LastUpdated
--    200910090000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems
--    Customer Service
--    
--    Postal: 170 W Tasman Drive
--    San Jose, CA  95134
--    USA
--    
--    Tel: +1 800 553-NETS
--    
--    E-mail: sanos-pm@cisco.com
--  Descr
--    A MIB module that provides monitoring information
--    about the transceivers plugged into interface on a
--    system.
--  RevDate
--    200910090000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoInterfaceXcvrMonMIBNotifs OBJECT IDENTIFIER ::= { ciscoInterfaceXcvrMonitorMIB 0 }
ciscoInterfaceXcvrMonMIBObjects OBJECT IDENTIFIER ::= { ciscoInterfaceXcvrMonitorMIB 1 }
ciscoInterfaceXcvrMonMIBConform OBJECT IDENTIFIER ::= { ciscoInterfaceXcvrMonitorMIB 2 }
ciscoInterfaceXcvrMonMIBCompliances OBJECT IDENTIFIER ::= { ciscoInterfaceXcvrMonMIBConform 1 }
ciscoInterfaceXcvrMonMIBGroups OBJECT IDENTIFIER ::= { ciscoInterfaceXcvrMonMIBConform 2 }

CiscoInterfaceXcvrMonitorStatus ::= INTEGER {
        highSet(1),
        lowSet(2),
        highClear(3),
        lowClear(4),
        normal(5)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention defines the status of the
--    monitoring parameter for a given sensor type in 
--    transceiver digital diagnostics on an interface.
--    
--    The value of the monitoring parameter for a given
--    sensor lies are bounded within maximum (high) and
--    minimum (low) limits. If the current value is over 
--    the high limit, this status is set to 'highSet'. Upon
--    the value of the sensor coming back into the normal
--    range (between high and low values), this status is
--    set to 'highClear'. 
--    
--    Similarly, if the current value is below the low limit, 
--    this status is set to 'lowSet'. Upon the value the 
--    sensor coming back into normal range subsequently, this 
--    status is set to 'lowClear'.
--    
--    If the current value is stays within the high and low 
--    limits, this status is set to 'normal'. Also, subsequently 
--    after the status had been either 'highClear' or 
--    'lowClear', if the value is within the high and low 
--    limits, this status is set to 'normal'.

cIfXcvrMonDigitalDiagTempAlarm OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of temperature alarm flag on the
        temperature sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 1 }

cIfXcvrMonDigitalDiagTempWarning OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of temperature warning flag on the
        temperature sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 2 }

cIfXcvrMonDigitalDiagVoltAlarm OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of voltage alarm flag on the
        voltage sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 3 }

cIfXcvrMonDigitalDiagVoltWarning OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of voltage warning flag on the
        voltage sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 4 }

cIfXcvrMonDigitalDiagCurrAlarm OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of current alarm flag on the
        current sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 5 }

cIfXcvrMonDigitalDiagCurrWarning OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of current warning flag on the
        current sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 6 }

cIfXcvrMonDigitalDiagRxPwrAlarm OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of Rx power alarm flag on the
        Rx power sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 7 }

cIfXcvrMonDigitalDiagRxPwrWarning OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of Rx power warning flag on the
        Rx power sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 8 }

cIfXcvrMonDigitalDiagTxPwrAlarm OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of Tx power alarm flag on the
        Tx power sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 9 }

cIfXcvrMonDigitalDiagTxPwrWarning OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of Tx power warning flag on the
        Tx power sensor of the transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 10 }

cIfXcvrMonDigitalDiagTxFaultAlarm OBJECT-TYPE
    SYNTAX CiscoInterfaceXcvrMonitorStatus
--    Rsyntax INTEGER {
--        highSet(1),
--        lowSet(2),
--        highClear(3),
--        lowClear(4),
--        normal(5)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The current status of Tx fault count flag on the
        transceiver in the interface."
    ::= { ciscoInterfaceXcvrMonMIBObjects 11 }

cIfXcvrMonStatusChangeNotifEnable OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Indicates whether cIfXcvrMonStatusChangeNotif should be
        generated."
    ::= { ciscoInterfaceXcvrMonMIBObjects 12 }

cIfXcvrMonStatusChangeNotif TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoInterfaceXcvrMonitorMIB
    VARIABLES {
        ifName, cIfXcvrMonDigitalDiagTempAlarm, 
        cIfXcvrMonDigitalDiagTempWarning, 
        cIfXcvrMonDigitalDiagVoltAlarm, 
        cIfXcvrMonDigitalDiagVoltWarning, 
        cIfXcvrMonDigitalDiagCurrAlarm, 
        cIfXcvrMonDigitalDiagCurrWarning, 
        cIfXcvrMonDigitalDiagRxPwrAlarm, 
        cIfXcvrMonDigitalDiagRxPwrWarning, 
        cIfXcvrMonDigitalDiagTxPwrAlarm, 
        cIfXcvrMonDigitalDiagTxPwrWarning, 
        cIfXcvrMonDigitalDiagTxFaultAlarm }
--  Status
--    mandatory
    DESCRIPTION
        "This notification trap indicates the current status of the
        alarm and warning monitoring parameters for all the sensors 
        based on the digital diagnostic monitoring information.
        This notification is generated whenever there is a change 
        in the status of atleast one of the monitoring parameters
        of the sensors on the transceiver in an interface."
    ::= 1

cIfXcvrDigitalDiagMonStatusGroup OBJECT IDENTIFIER ::= { ciscoInterfaceXcvrMonMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of Cisco specific Digital Diagnostics
--    monitoring status information.
--  objects
--    cIfXcvrMonDigitalDiagTempAlarm, 
--    cIfXcvrMonDigitalDiagTempWarning, 
--    cIfXcvrMonDigitalDiagVoltAlarm, 
--    cIfXcvrMonDigitalDiagVoltWarning, 
--    cIfXcvrMonDigitalDiagCurrAlarm, 
--    cIfXcvrMonDigitalDiagCurrWarning, 
--    cIfXcvrMonDigitalDiagRxPwrAlarm, 
--    cIfXcvrMonDigitalDiagRxPwrWarning, 
--    cIfXcvrMonDigitalDiagTxPwrAlarm, 
--    cIfXcvrMonDigitalDiagTxPwrWarning, 
--    cIfXcvrMonDigitalDiagTxFaultAlarm, 
--    cIfXcvrMonStatusChangeNotifEnable

cIfXcvrMonStatusChangeNotifGroup OBJECT IDENTIFIER ::= { ciscoInterfaceXcvrMonMIBGroups 2 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of Cisco specific Digital Diagnostics
--    monitoring notifications.
--  notifications
--    cIfXcvrMonStatusChangeNotif

cIfXcvrMonMIBCompliance OBJECT IDENTIFIER ::= { ciscoInterfaceXcvrMonMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    This is a default module-compliance
--    containing default object groups.
--  Module
--    >>current<<
--   MandGroup
--    cIfXcvrDigitalDiagMonStatusGroup
--   MandGroup
--    cIfXcvrMonStatusChangeNotifGroup
--   ObjVar
--    cIfXcvrMonStatusChangeNotifEnable


END