-- This file is corresponding to Release 6.1.2.100 from 2001/09/26 00:00:00 -- (C)opyright 1991-1999 BinTec Communications AG, All Rights Reserved -- $RCSfile: mibtoken,v $ -- $Revision: 1.6 $ BIANCA-BRICK-TOKEN-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 PhysAddress FROM SNMPv2-TC; org OBJECT IDENTIFIER ::= { iso 3 } dod OBJECT IDENTIFIER ::= { org 6 } internet OBJECT IDENTIFIER ::= { dod 1 } private OBJECT IDENTIFIER ::= { internet 4 } enterprises OBJECT IDENTIFIER ::= { private 1 } bintec OBJECT IDENTIFIER ::= { enterprises 272 } bibo OBJECT IDENTIFIER ::= { bintec 4 } tokenring OBJECT IDENTIFIER ::= { bibo 11 } -- Interfaces Group -- Management Information for the TokenRing Subsystem of the BIANCA/BRICK Date ::= INTEGER HexValue ::= INTEGER tokenringIfTable OBJECT-TYPE SYNTAX SEQUENCE OF TokenRingIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The tokenringIfTable contains information relating to the interfaces found on the system. Each entry corresponds to a connected TokenRing interface. Entries can only be added or deleted by the system. Creating entries: Entries are created by the system only when a new TokenRing module is installed. Deleting entries: Entries are removed by the system after the appropriate TokenRing module is removed." ::= { tokenring 1 } tokenringIfEntry OBJECT-TYPE SYNTAX TokenRingIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { tokenringIfSlot } ::= { tokenringIfTable 1 } TokenRingIfEntry ::= SEQUENCE { tokenringIfSlot INTEGER, tokenringState INTEGER, tokenringIfRingRate INTEGER, tokenringIfEarlyTokenRelease INTEGER, tokenringIfWrapInterface INTEGER, tokenringIfMtu INTEGER, tokenringIfOverwritePhysAddress PhysAddress, tokenringIfNAUN PhysAddress, -- Statistics tokenringIfLineError Counter, tokenringIfBurstError Counter, tokenringIfAriFciError Counter, tokenringIfLostFrameError Counter, tokenringIfReceiveCongestionError Counter, tokenringIfFrameCopiedError Counter, tokenringIfTokenError Counter, tokenringIfDmaBusError Counter, tokenringIfDmaParityError Counter, tokenringIfSoftError Counter, tokenringIfSourceRouting INTEGER } tokenringIfSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Unique Slot of the TokenRing interface." ::= { tokenringIfEntry 1 } tokenringIfState OBJECT-TYPE SYNTAX INTEGER { down(1), -- inactive start(2), -- start initialization download(3), -- download adapter microcode reset(4), bud(5), -- bring up diagnostics tferipb(6), -- transfer initialization parameter block wait1(7), open(8), -- open onto the ring wait2(9), delay1(10), receive(11), -- enable receive wait3(12), done(13), -- successful initialization close(14), -- close adapter error(15) -- unrecoverable error } ACCESS read-only STATUS mandatory DESCRIPTION "The TokenRing adapter initialization state" ::= { tokenringIfEntry 2 } tokenringIfRingRate OBJECT-TYPE SYNTAX INTEGER { tr-4Mbit(1), tr-16Mbit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "speed of the token ring." ::= { tokenringIfEntry 3 } tokenringIfEarlyTokenRelease OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable or disable early token release. This feature is only valid with the 16 Mbps ring rate" ::= { tokenringIfEntry 4 } tokenringIfWrapInterface OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable or disable the wrap interface option. If enabled the ring insertion process is omitted and all user-transmit data appears as receive data." ::= { tokenringIfEntry 5 } tokenringIfMtu OBJECT-TYPE SYNTAX INTEGER (15..17800) ACCESS read-write STATUS mandatory DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets." ::= { tokenringIfEntry 6 } tokenringIfOverwritePhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. This overwrites the address defined in the adapter PROM." ::= { tokenringIfEntry 7 } tokenringIfNAUN OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The interface's address of the nearest upstream neighbour." ::= { tokenringIfEntry 8 } tokenringIfLineError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of line errors. This counter is incremented whenever 1) a frame is repeated or copied, and 2) the Error Detected Indicator (EDI) is zero in the incoming frame, and 3) at least one of the following conditions exists: a) a code violation between SDEL and EDEL b) a code violation in a token c) a FCS error" ::= { tokenringIfEntry 9 } tokenringIfBurstError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of burst errors. This counter is incremented whenever the interface detects the absence of transitions for five half-bit times between SDEL and EDEL, or EDEL and SDEL" ::= { tokenringIfEntry 10 } tokenringIfAriFciError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of ARI/FCI errors. This counter is incremented whenever the interface receives an Active Monitor Present (AMP) MAC frame with the ARI/FCI bit equal to zero and a Standby Monitor Present (SMP) MAC frame with the ARI/FCI bits equal to zero, or more than one SMP MAC frame with the ARI/FCI bits equal to zero, without receiving an intervening AMP MAC frame." ::= { tokenringIfEntry 11 } tokenringIfLostFrameError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of lost frames errors. This counter is incremented whenever the interface is in transmit (stripping) mode and fails to receive the end of the frame it transmitted" ::= { tokenringIfEntry 12 } tokenringIfReceiveCongestionError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of receive congestion errors. This counter is incremented whenever the interface in the repeat mode recognizes a frame addressed to it but has no buffer space to copy the frame" ::= { tokenringIfEntry 13 } tokenringIfFrameCopiedError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of frame copied errors. This counter is incremented whenever the interface in the receive/repeat mode recognizes a frame addressed to its specific address but finds the ARI bits not equal to zero" ::= { tokenringIfEntry 14 } tokenringIfTokenError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of token errors. This counter is only active in the active monitor station. It is incremented when the active monitor detects an error in the token protocol" ::= { tokenringIfEntry 15 } tokenringIfDmaBusError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of DMA bus errors. This counter is counts the occurences of DMA bus errors that do not exceed the specified abort thresholds" ::= { tokenringIfEntry 16 } tokenringIfDmaParityError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of DMA parity errors. This counter counts the occurences of DMA parity errors that do not exceed the specified abort thresholds" ::= { tokenringIfEntry 17 } tokenringIfSoftError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of soft errors that occur during normal operation. A soft error is an error condition that temporarily degrades system performance; however the ring recovers by using the protocols of the adapter. The adapter counts these errors and can report them to both the attached product and the ring error monitor." ::= { tokenringIfEntry 18 } tokenringIfSourceRouting OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "enable or disable source routing. If enabled, a routing information field is added to the frame sent over this interface." ::= { tokenringIfEntry 19 } END -- of Tokenring definitions