-- File Name : AirPair-13.0.0 -- Version : 13.0.0 -- Date : Dec 2005 -- Author : DragonWave Inc. AirPairv2cTrap-MIB DEFINITIONS ::= BEGIN IMPORTS NOTIFICATION-TYPE, IpAddress FROM SNMPv2-SMI ifIndex, OBJECT-TYPE FROM RFC-1212 airPair, ttySessionUserName, ttySessionUserConnectionType FROM AirPair-MIB; apSnmpV2Notification OBJECT IDENTIFIER ::= { airPair 26 } apSnmpV2Traps OBJECT IDENTIFIER ::= { apSnmpV2Notification 0 } coldStartV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered." ::= { apSnmpV2Traps 0 } linkDownV2c NOTIFICATION-TYPE OBJECTS {ifIndex} STATUS current DESCRIPTION "A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration." ::= { apSnmpV2Traps 1 } linkUpV2c NOTIFICATION-TYPE OBJECTS {ifIndex} STATUS current DESCRIPTION "A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up." ::= { apSnmpV2Traps 2 } explicitAuthenticationFailureV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Authentication of the peer AirPair node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on AirPair faulty cable between the modem and radio, and recommended course of action is to check both ends of the link." ::= { apSnmpV2Traps 3 } autoNegotiationDuplexMismatchV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The AirPair ethernet interface has a mismatch in duplex. The severity is major, the probable cause is an incorrect configuration of the switch or router connected to AirPair, or the AirPair autonegotion settings. The recommended course of action is to check the connection." ::= { apSnmpV2Traps 4 } modemLossOfSignalLockFromDemodulatorV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link." ::= { apSnmpV2Traps 5 } modemUncorrectedBerThresholdExceededV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The uncorrected BER threshold has been exceeded. The severity is major, the probable cause is physical interference in the air link or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the air pair nodes." ::= { apSnmpV2Traps 6 } modemModulatorPllLockFailureV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Modulator PLL failure. The severity is critical, the probable cause a faulty modem card within AirPair, and recommended course of action is to replace the modem unit." ::= { apSnmpV2Traps 7 } modemModulatorLossOfSyncBytesV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Loss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course of action is to check the line of site between the air pair nodes." ::= { apSnmpV2Traps 8 } modemModulatorInputFifoErrorV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Overrun or underrun of the FIFO contained inside the modulator. The severity is critical, the probable cause is electrical interference, and recommended course of action is to reset the modem unit, or relpace the modem unit." ::= { apSnmpV2Traps 9 } modemModulatorInputDataErrorV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "All ones or all zeroes at the input of the modulator. The severity is critical, the probable cause is electrical interference, and recommended course of action is to reset the modem unit, or replace the modem unit. " ::= { apSnmpV2Traps 10 } modemSnrBelowThresholdV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the air pair nodes." ::= { apSnmpV2Traps 11 } radioPLDROLostLockV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit within AirPair, and recommended course of action is to replace the radio unit." ::= { apSnmpV2Traps 12 } radioLostCommunicationV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "RS232 communication lost between AIRPAIR and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection." ::= { apSnmpV2Traps 13 } radioMismatchV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The radio connected to the AIRPAIR modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem, and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number." ::= { apSnmpV2Traps 14 } radioPowerAmpV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit within AirPair, and recommended course of action is to replace the radio unit." ::= { apSnmpV2Traps 15 } ifTxSynthUnlockedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The IF card within the modem unit has a Transmit Synthesizer which is not locked and as a result will not transmit. The severity is critical, the probable cause an incorrectly programmed frequency setting in the modem or a faulty IF card, and recommended course of action is to check frequency setting in the modem or to replace the modem unit." ::= { apSnmpV2Traps 16 } ifRxSynthUnlockedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The IF card within the modem unit has a Receive Synthesizer which is not locked. The severity is critical, the probable cause an incorrectly programmed frequency setting in the modem or a faulty IF card, and recommended course of action is to check frequency setting in the modem or to replace the modem unit." ::= { apSnmpV2Traps 17 } ttySessionCommencedV2c NOTIFICATION-TYPE OBJECTS { ttySessionUserName, ttySessionUserConnectionType } STATUS current DESCRIPTION "A person has successfully gained access to the ascii management port (telnet, local management port, or HTTP). The username is included in the Trap." ::= { apSnmpV2Traps 18 } ttySessionTerminatedV2c NOTIFICATION-TYPE OBJECTS { ttySessionUserName, ttySessionUserConnectionType } STATUS current DESCRIPTION "A person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap." ::= { apSnmpV2Traps 19 } rslBelowThresholdV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The RSL has been detected below its minimum threshold." ::= { apSnmpV2Traps 20 } droppedFramesThresholdExceededV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The ethernet dropped frames threshold has been detected above its threshold value." ::= { apSnmpV2Traps 21 } bwUtilizationThresholdExceededV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The ethernet bandwidth threshold has been detected above its threshold value." ::= { apSnmpV2Traps 22 } explicitAuthFailureClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The peer node is now authenticated." ::= { apSnmpV2Traps 23 } autoNegDuplexMismatchClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The Ethernet connection is not experiencing auto-negotiation duplex mismatch." ::= { apSnmpV2Traps 24 } lossOfSyncSigFromDemoClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The demodulator is synchronized." ::= { apSnmpV2Traps 25 } uncorrectedBerThresExceededClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The demodulator uncorrected BER is now below its minimum threshold value." ::= { apSnmpV2Traps 26 } modemModPLLFailureClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The modem PLL is not failing." ::= { apSnmpV2Traps 27 } modemModLossOfSyncBytesClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The modem is not experiencing loss of synch bytes." ::= { apSnmpV2Traps 28 } modemModInputFifoOverUnderClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The modem is not experiencing input FIFO over/under runs." ::= { apSnmpV2Traps 29 } modemModInputDataInacClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The modem is not experiencing data inactivity." ::= { apSnmpV2Traps 30 } snrBelowThresholdClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. SNR is now above its minimum threshold value." ::= { apSnmpV2Traps 31 } radioPLDROLostLockClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The radio PLDRO/LO lost lock condition has cleared." ::= { apSnmpV2Traps 32 } radioLostCommunicationClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. RS232 communication has been re-establisted between AIRPAIR and the radio." ::= { apSnmpV2Traps 33 } radioMismatchClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condtion has cleared. The radio matches the programmed parameters in the modem." ::= { apSnmpV2Traps 34 } radioPowerAmpClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condtion has cleared. The radio Power Amp is not in the failed state." ::= { apSnmpV2Traps 35 } ifTxSynthUnlockedClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condtion has cleared. The IF stage transmit synthesizer is now locked." ::= { apSnmpV2Traps 36 } ifRxSynthUnlockedClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condtion has cleared. The IF stage receive synthesizer is now locked." ::= { apSnmpV2Traps 37 } rslBelowThresholdClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. RSL is now above its minimum threshold." ::= { apSnmpV2Traps 38 } droppedFramesThresholdExceededClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared.The ethernet dropped frames threshold is now below its threshold value." ::= { apSnmpV2Traps 39 } bwUtilizationThresholdExceededClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The ethernet bandwidth threshold is now below its threshold value." ::= { apSnmpV2Traps 40 } rxIfCableLossExceededV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The Rx cable loss has exceeded limit. This trap is only valid when the AirPair installation type is IDU-ODU split." ::= { apSnmpV2Traps 41 } rxIfCableLossExceededClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The Rx cable loss is now within limit. This trap is only valid when the AirPair installation type is IDU-ODU split" ::= { apSnmpV2Traps 42 } txIfCableLossExceededV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The Tx cable loss has exceeded limit. This trap is only valid when the AirPair installation type is IDU-ODU split" ::= { apSnmpV2Traps 43 } txIfCableLossExceededClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The Tx cable loss is now within limit. This trap is only valid when the AirPair installation type is IDU-ODU split" ::= { apSnmpV2Traps 44 } fan1FailedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The Fan1 has failed. This trap is only valid when the AirPair installation type is IDU-ODU split" ::= { apSnmpV2Traps 45 } fan1FailedClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The fan1 is running normally. This trap is only valid when the AirPair installation type is IDU-ODU split" ::= { apSnmpV2Traps 46 } fan2FailedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The Fan2 has failed. This trap is only valid when the AirPair installation type is IDU-ODU split" ::= { apSnmpV2Traps 47 } fan2FailedClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The fan2 is running normally. This trap is only valid when the AirPair installation type is IDU-ODU split" ::= { apSnmpV2Traps 48 } modemCardMismatchedHardwareFirmwareV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The modem card has incompatible hardware and firmware. The firmware will not run properly on this card." ::= { apSnmpV2Traps 49 } modemCardMismatchedHardwareFirmwareClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "The condition has cleared. The modem card has compatible hardware and firmware. The firmware will run properly on this card." ::= { apSnmpV2Traps 50 } atpcConfigMismatchV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "ATPC configuration mismatch in the Airpair systems. ATPC is enabled at one system, but ATPC is not enabled at the other system." ::= { apSnmpV2Traps 51 } atpcConfigMismatchClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "ATPC configuration mismatch in the Airpair systems is cleared. Both systems enabled ATPC." ::= { apSnmpV2Traps 52 } radioHiPwrOptM1V2c NOTIFICATION-TYPE STATUS current DESCRIPTION "When hi-power radio is used, hi-power gate M1 drain current is out of lower or upper limits." ::= { apSnmpV2Traps 53 } radioHiPwrOptM1ClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "When hi-power radio is used, hi-power gate M1 drain current is between lower and upper limits." ::= { apSnmpV2Traps 54 } radioHiPwrOptM2V2c NOTIFICATION-TYPE STATUS current DESCRIPTION "When hi-power radio is used, hi-power gate M2 drain current is out of lower or upper limits." ::= { apSnmpV2Traps 55 } radioHiPwrOptM2ClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "When hi-power radio is used, hi-power gate M2 drain current is between lower and upper limits." ::= { apSnmpV2Traps 56 } radioHiPwrTxDetectorV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "When hi-power radio is used, hi-power tx detector dBm value is smaller than limit." ::= { apSnmpV2Traps 57 } radioHiPwrTxDetectorClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "When hi-power radio is used, hi-power tx detector dBm value is not smaller than limit." ::= { apSnmpV2Traps 58 } sntpServersUnreachableV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Can't reach any of the sntp servers" ::= { apSnmpV2Traps 59 } sntpServersUnreachableClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "At least one of SNTP servers is reachable" ::= { apSnmpV2Traps 60 } rlsMismatchV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "RLS mismatch" ::= { apSnmpV2Traps 61 } rlsMismatchClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "RLS mismatch cleared" ::= { apSnmpV2Traps 62 } rLSShutdownActivatedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "RLS shutdown is activated" ::= { apSnmpV2Traps 63 } rLSShutdownActivatedClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "RLS shutdown is not activated" ::= { apSnmpV2Traps 64 } -- -- FREQUENCY FILE RELATED TRAPS -- frequencyFileInvalidV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "When the executing frequency file is invalid, this trap is generated." ::= { apSnmpV2Traps 65 } optionalParaNotEntFreqFileV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "when the optional parameters are not entered in frequency file, and the system boots up, this trap is generated." ::= { apSnmpV2Traps 66 } progRadioBandNotFoundFreqFileV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "when the executing frequency file doesn't contain the info related to programmed radio band, this trap is generated." ::= { apSnmpV2Traps 67 } redundancySwitchOverSuccessV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Radio Redundancy Switch over success" ::= { apSnmpV2Traps 68 } redundancySwitchOverFailedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Radio Redundancy Switch over failed" ::= { apSnmpV2Traps 69 } redundancyNoAtpcSupportV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Radio does not support atpc" ::= { apSnmpV2Traps 70 } redundancyNoAtpcSupportClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Radio does not support atpc cleared" ::= { apSnmpV2Traps 71 } redundancyInvalidFirmwareV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Radio firmware on radio and on modem card mismatch" ::= { apSnmpV2Traps 72 } redundancyInvalidFirmwareClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Radio firmware mismatch cleared" ::= { apSnmpV2Traps 73 } redundancySwitchInitByLocalendV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Radio switch initiated by local end" ::= { apSnmpV2Traps 74 } redundancySwitchInitByPeerV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Radio switch initiated by peer" ::= { apSnmpV2Traps 75 } aamConfigMisMatchV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Automatic Adaptive modulation configuration mismatch" ::= { apSnmpV2Traps 76 } aamConfigMisMatchClearV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Automatic Adaptive modulation configuration mismatch cleared" ::= { apSnmpV2Traps 77 } aamQpskActiveV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Automatic Adaptive modulation running on QPSK modulation" ::= { apSnmpV2Traps 78 } aamQpskActiveClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Automatic Adaptive modulation running on higher modulation" ::= { apSnmpV2Traps 79 } primaryRadioFaultyV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Primary radio is faulty." ::= { apSnmpV2Traps 80 } primaryRadioFaultyClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "primary radio is not faulty anymore." ::= { apSnmpV2Traps 81 } radioSerialNumberMismatchV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Redundancy, Radio Serial number mismatch." ::= { apSnmpV2Traps 82 } radioSerialNumberMismatchClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Redundancy, Radio Serial number mismatch cleared." ::= { apSnmpV2Traps 83 } excessiveCableLossChangeV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Excessive cable loss change" ::= { apSnmpV2Traps 84 } excessiveCableLossChangeClearedV2c NOTIFICATION-TYPE STATUS current DESCRIPTION "Excessive cable loss change cleared" ::= { apSnmpV2Traps 85 } END