-- Ascend mibswitchconfig MIB -- -- Ascend Communications, Inc -- 1275 Harbor Bay Pkwy -- Alameda, CA 94502 -- +1 510 769 6001 -- info@ascend.com -- -- Copyright (c) 1993-1999 Ascend Communications, Inc. -- All rights reserved. -- -- Do not edit this file directly. -- It is generated automatically by mibgen for use with -- TAOS version 10.0.1 or newer. -- ASCEND-MIBSWITCHCONFIG-MIB DEFINITIONS ::= BEGIN IMPORTS configuration FROM ASCEND-MIB IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- If any of the MIB compilers have problems with the DisplayString -- or PhysAddress, uncomment the next two lines. DisplayString ::= OCTET STRING -- PhysAddress ::= OCTET STRING mibswitchConfig OBJECT IDENTIFIER ::= { configuration 151} -- The mibswitchConfig table -- -- This table contains parameters for the mibswitchConfig profile -- mibswitchConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF MibswitchConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mibswitchConfig profile entries." ::= { mibswitchConfig 1 } mibswitchConfigEntry OBJECT-TYPE SYNTAX MibswitchConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibswitchConfig entry containing objects that maps to the parameters of mibswitchConfig profile." INDEX { switchConfig-SwitchName } ::= { mibswitchConfigTable 1 } MibswitchConfigEntry ::= SEQUENCE { switchConfig-SwitchName DisplayString, switchConfig-Action-o INTEGER } switchConfig-SwitchName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Name of Switch configuration profile." ::= { mibswitchConfigEntry 1 } switchConfig-Action-o OBJECT-TYPE SYNTAX INTEGER { noAction (1), createProfile (2), deleteProfile (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { mibswitchConfigEntry 2 } -- The mibswitchConfig__atm_parameters__outgoing_shaper table -- -- This table contains parameters for the mibswitchConfig__atm_parameters__outgoing_shaper profile -- mibswitchConfig-AtmParameters-OutgoingShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF MibswitchConfig-AtmParameters-OutgoingShaperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mibswitchConfig__atm_parameters__outgoing_shaper profile entries." ::= { mibswitchConfig 2 } mibswitchConfig-AtmParameters-OutgoingShaperEntry OBJECT-TYPE SYNTAX MibswitchConfig-AtmParameters-OutgoingShaperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibswitchConfig__atm_parameters__outgoing_shaper entry containing objects that maps to the parameters of mibswitchConfig__atm_parameters__outgoing_shaper profile." INDEX { switchConfig-AtmParameters-OutgoingShaper-SwitchName, switchConfig-AtmParameters-OutgoingShaper-Index-o } ::= { mibswitchConfig-AtmParameters-OutgoingShaperTable 1 } MibswitchConfig-AtmParameters-OutgoingShaperEntry ::= SEQUENCE { switchConfig-AtmParameters-OutgoingShaper-SwitchName DisplayString, switchConfig-AtmParameters-OutgoingShaper-Index-o INTEGER, switchConfig-AtmParameters-OutgoingShaper-QueueIndex INTEGER, switchConfig-AtmParameters-OutgoingShaper-Vpi INTEGER, switchConfig-AtmParameters-OutgoingShaper-Bandwidth INTEGER } switchConfig-AtmParameters-OutgoingShaper-SwitchName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibswitchConfig-AtmParameters-OutgoingShaperEntry 1 } switchConfig-AtmParameters-OutgoingShaper-Index-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibswitchConfig-AtmParameters-OutgoingShaperEntry 2 } switchConfig-AtmParameters-OutgoingShaper-QueueIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0: this shaper is inactive. Non-0: identifies the queue (of an outgoing trunk port) whose bandwidth with the specified VPI will be shaped by this shaper. Condition: queue must have already been properly configured. Limit: at most 1 shaper per VPI." ::= { mibswitchConfig-AtmParameters-OutgoingShaperEntry 3 } switchConfig-AtmParameters-OutgoingShaper-Vpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Designate the VPI whose bandwidth to be shaped." ::= { mibswitchConfig-AtmParameters-OutgoingShaperEntry 4 } switchConfig-AtmParameters-OutgoingShaper-Bandwidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth (in KBits/sec) to shape." ::= { mibswitchConfig-AtmParameters-OutgoingShaperEntry 5 } -- The mibswitchConfig__atm_parameters__outgoing_queue table -- -- This table contains parameters for the mibswitchConfig__atm_parameters__outgoing_queue profile -- mibswitchConfig-AtmParameters-OutgoingQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF MibswitchConfig-AtmParameters-OutgoingQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of mibswitchConfig__atm_parameters__outgoing_queue profile entries." ::= { mibswitchConfig 3 } mibswitchConfig-AtmParameters-OutgoingQueueEntry OBJECT-TYPE SYNTAX MibswitchConfig-AtmParameters-OutgoingQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibswitchConfig__atm_parameters__outgoing_queue entry containing objects that maps to the parameters of mibswitchConfig__atm_parameters__outgoing_queue profile." INDEX { switchConfig-AtmParameters-OutgoingQueue-SwitchName, switchConfig-AtmParameters-OutgoingQueue-Index-o } ::= { mibswitchConfig-AtmParameters-OutgoingQueueTable 1 } MibswitchConfig-AtmParameters-OutgoingQueueEntry ::= SEQUENCE { switchConfig-AtmParameters-OutgoingQueue-SwitchName DisplayString, switchConfig-AtmParameters-OutgoingQueue-Index-o INTEGER, switchConfig-AtmParameters-OutgoingQueue-Active INTEGER, switchConfig-AtmParameters-OutgoingQueue-Name DisplayString, switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-Shelf INTEGER, switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-Slot INTEGER, switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-ItemNumber INTEGER, switchConfig-AtmParameters-OutgoingQueue-Cbr INTEGER, switchConfig-AtmParameters-OutgoingQueue-RealTimeVbr INTEGER, switchConfig-AtmParameters-OutgoingQueue-NonRealTimeVbr INTEGER, switchConfig-AtmParameters-OutgoingQueue-Ubr INTEGER, switchConfig-AtmParameters-OutgoingQueue-HighPriorityWeight INTEGER, switchConfig-AtmParameters-OutgoingQueue-LowPriorityWeight INTEGER, switchConfig-AtmParameters-OutgoingQueue-SourcePort-Shelf INTEGER, switchConfig-AtmParameters-OutgoingQueue-SourcePort-Slot INTEGER, switchConfig-AtmParameters-OutgoingQueue-SourcePort-ItemNumber INTEGER, switchConfig-AtmParameters-OutgoingQueue-HopLevel INTEGER } switchConfig-AtmParameters-OutgoingQueue-SwitchName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 1 } switchConfig-AtmParameters-OutgoingQueue-Index-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 2 } switchConfig-AtmParameters-OutgoingQueue-Active OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "yes: this queue (of outgoing ATM cells) is active." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 3 } switchConfig-AtmParameters-OutgoingQueue-Name OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "For future use. The current design does not use this name attribute but instead references a LIM slot, CM, or trunk port by its physical-address. We may in the future support referencing a LIM slot, CM, or trunk port by its name as well as by its physical-address. This name attribute consists of a null-terminated ASCII string; is read-only; and defaults to the ASCII form of physical-address." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 4 } switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-Shelf OBJECT-TYPE SYNTAX INTEGER { anyShelf (1), shelf1 (2), shelf2 (3), shelf3 (4), shelf4 (5), shelf5 (6), shelf6 (7), shelf7 (8), shelf8 (9), shelf9 (10) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the shelf that the addressed physical device resides on." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 5 } switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-Slot OBJECT-TYPE SYNTAX INTEGER { anySlot (1), slot1 (2), slot2 (3), slot3 (4), slot4 (5), slot5 (6), slot6 (7), slot7 (8), slot8 (9), slot9 (10), slot10 (11), slot11 (12), slot12 (13), slot13 (14), slot14 (15), slot15 (16), slot16 (17), slot17 (18), slot18 (19), slot19 (20), slot20 (21), slot21 (22), slot22 (23), slot23 (24), slot24 (25), slot25 (26), slot26 (27), slot27 (28), slot28 (29), slot29 (30), slot30 (31), slot31 (32), slot32 (33), slot33 (34), slot34 (35), slot35 (36), slot36 (37), slot37 (38), slot38 (39), slot39 (40), slot40 (41), aLim (55), bLim (56), cLim (57), dLim (58), leftController (49), rightController (50), controller (42), firstControlModule (53), secondControlModule (54), trunkModule1 (45), trunkModule2 (46), controlModule (51), slotPrimary (59) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot that the addressed physical device resides on." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 6 } switchConfig-AtmParameters-OutgoingQueue-PhysicalAddress-ItemNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A number that specifies an addressable entity within the context of shelf and slot." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 7 } switchConfig-AtmParameters-OutgoingQueue-Cbr OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "yes: this queue supports ATM constant-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 8 } switchConfig-AtmParameters-OutgoingQueue-RealTimeVbr OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "yes: this queue supports ATM real-time-variable-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 9 } switchConfig-AtmParameters-OutgoingQueue-NonRealTimeVbr OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "yes: this queue supports ATM non-real-time-variable-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 10 } switchConfig-AtmParameters-OutgoingQueue-Ubr OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "yes: this queue supports ATM unspecified-bit-rate traffic. Condition: if active=yes, at least one (might be more) of cbr, real-time-vbr, non-real-time-vbr, and ubr must also be yes. Limit: at least 1, and at most 2 active queues for each ATM service category." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 11 } switchConfig-AtmParameters-OutgoingQueue-HighPriorityWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Sets the weight of this queue on the high-priority scheduler. This relative weight determines how much of the scheduler's work cycle this queue should receive relative to other queues on the same scheduler. Condition: if active=yes, either high- or low-priority-weight must be non-0. Limit: total weights per scheduler must be <= 128." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 12 } switchConfig-AtmParameters-OutgoingQueue-LowPriorityWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Sets the weight of this queue on the low-priority scheduler. This relative weight determines how much of the scheduler's work cycle this queue should receive relative to other queues on the same scheduler. Condition: if active=yes, either high- or low-priority-weight must be non-0. Limit: total weights per scheduler must be <= 128." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 13 } switchConfig-AtmParameters-OutgoingQueue-SourcePort-Shelf OBJECT-TYPE SYNTAX INTEGER { anyShelf (1), shelf1 (2), shelf2 (3), shelf3 (4), shelf4 (5), shelf5 (6), shelf6 (7), shelf7 (8), shelf8 (9), shelf9 (10) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the shelf that the addressed physical device resides on." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 14 } switchConfig-AtmParameters-OutgoingQueue-SourcePort-Slot OBJECT-TYPE SYNTAX INTEGER { anySlot (1), slot1 (2), slot2 (3), slot3 (4), slot4 (5), slot5 (6), slot6 (7), slot7 (8), slot8 (9), slot9 (10), slot10 (11), slot11 (12), slot12 (13), slot13 (14), slot14 (15), slot15 (16), slot16 (17), slot17 (18), slot18 (19), slot19 (20), slot20 (21), slot21 (22), slot22 (23), slot23 (24), slot24 (25), slot25 (26), slot26 (27), slot27 (28), slot28 (29), slot29 (30), slot30 (31), slot31 (32), slot32 (33), slot33 (34), slot34 (35), slot35 (36), slot36 (37), slot37 (38), slot38 (39), slot39 (40), slot40 (41), aLim (55), bLim (56), cLim (57), dLim (58), leftController (49), rightController (50), controller (42), firstControlModule (53), secondControlModule (54), trunkModule1 (45), trunkModule2 (46), controlModule (51), slotPrimary (59) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot that the addressed physical device resides on." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 15 } switchConfig-AtmParameters-OutgoingQueue-SourcePort-ItemNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A number that specifies an addressable entity within the context of shelf and slot." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 16 } switchConfig-AtmParameters-OutgoingQueue-HopLevel OBJECT-TYPE SYNTAX INTEGER { n-0Level (1), n-1Level (2), n-2Level (3), n-3Level (4), anyLevel (5) } ACCESS read-write STATUS mandatory DESCRIPTION "It specifies this queue can be used only by those VCs that originated 'hop-level' hops from this Stinger. The default value any-level means that data from permissible source ports at any hop level can be permitted into this queue." ::= { mibswitchConfig-AtmParameters-OutgoingQueueEntry 17 } END