-- Ascend miblsms MIB -- -- Ascend Communications, Inc -- 1275 Harbor Bay Pkwy -- Alameda, CA 94502 -- +1 510 769 6001 -- info@ascend.com -- -- Copyright (c) 1993-1999 Ascend Communications, Inc. -- All rights reserved. -- -- Do not edit this file directly. -- It is generated automatically by mibgen for use with -- TAOS version 10.0.1 or newer. -- ASCEND-MIBLSMS-MIB DEFINITIONS ::= BEGIN IMPORTS configuration FROM ASCEND-MIB IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- If any of the MIB compilers have problems with the DisplayString -- or PhysAddress, uncomment the next two lines. DisplayString ::= OCTET STRING -- PhysAddress ::= OCTET STRING miblsmsProfile OBJECT IDENTIFIER ::= { configuration 150} -- The miblsmsProfile table -- -- This table contains parameters for the miblsmsProfile profile -- miblsmsProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF MiblsmsProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of miblsmsProfile profile entries." ::= { miblsmsProfile 1 } miblsmsProfileEntry OBJECT-TYPE SYNTAX MiblsmsProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A miblsmsProfile entry containing objects that maps to the parameters of miblsmsProfile profile." INDEX { lsmsProfile-Index-o } ::= { miblsmsProfileTable 1 } MiblsmsProfileEntry ::= SEQUENCE { lsmsProfile-Index-o INTEGER, lsmsProfile-Active INTEGER, lsmsProfile-LsmsIpAddr IpAddress, lsmsProfile-NocGatewayIpAddr IpAddress, lsmsProfile-Spi DisplayString, lsmsProfile-PresharedKey DisplayString, lsmsProfile-AllowInsecure INTEGER, lsmsProfile-Action-o INTEGER } lsmsProfile-Index-o OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { miblsmsProfileEntry 1 } lsmsProfile-Active OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field is used to control whether Communications with the LSMS should be active or not (Yes/No). More specifically, if the router should start to listen for requests from the LSMS." ::= { miblsmsProfileEntry 2 } lsmsProfile-LsmsIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the LSMS. It is used in validating requests from the LSMS and to communicate in an in-secure fashion directly with the LSMS." ::= { miblsmsProfileEntry 3 } lsmsProfile-NocGatewayIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of NOC Gateway to the LSMS. This is the Tunnel Endpoint address of the Secure Communications Channel. It is essentially the address of the device that terminates the tunnel with the router and sits between the LSMS and router." ::= { miblsmsProfileEntry 4 } lsmsProfile-Spi OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Security Parameter Index that is used for Encrypting Secure Communications Channel (IPsec Tunnel) traffic between the Router and LSMS. The SPI is used to distinguish among different security associations terminating at the same destination and using the same IPsec protocol." ::= { miblsmsProfileEntry 5 } lsmsProfile-PresharedKey OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Preshared Key used to create Authentication and Encryption keys that are used to create the IPsec tunnel for the Secure Communications Channel." ::= { miblsmsProfileEntry 6 } lsmsProfile-AllowInsecure OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field is used to permit insecure communications. Insecure communications allows data to be sent in clear outside of an IPsec tunnel (Yes/No)." ::= { miblsmsProfileEntry 7 } lsmsProfile-Action-o OBJECT-TYPE SYNTAX INTEGER { noAction (1), createProfile (2), deleteProfile (3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { miblsmsProfileEntry 8 } END