AIBADGER-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, Integer32, Opaque, enterprises FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF Counter FROM RFC1155-SMI; aiBadger MODULE-IDENTITY LAST-UPDATED "200111020000Z" ORGANIZATION "Applied Innovation Inc." CONTACT-INFO " Engineering MIB Administrator Postal: Applied Innovation Inc. 5800 Innovation Drive Dublin, OH 43016-3271 Tel: 614-798-2000 Fax: 614-798-1770 E-mail: snmp@aiinet.com " DESCRIPTION "A MIB module for AI's AIBadger" ::= { enterprises 1438 } netManager OBJECT IDENTIFIER ::= { aiBadger 1 } aibadger OBJECT IDENTIFIER ::= { aiBadger 2 } aibadgerInfo OBJECT IDENTIFIER ::= { aibadger 1 } aibadgerSAMVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The aibadgerSAMVer is its hardware and software version for the aibadger and the SAM board." ::= { aibadgerInfo 1 } aibadgerMACAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) MAX-ACCESS read-only STATUS current DESCRIPTION "The aibadgerMACAddr is the MAC Address of the SAM board." ::= { aibadgerInfo 2 } aibadgerStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The aibadgerStatus is the status of the aibadger. The possible values are: working, failed, disabled." ::= { aibadgerInfo 3 } aibadgerTimeTag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "The aibadgerTimeTag is the time stamp when the aibadger status changed." ::= { aibadgerInfo 4 } aibadgerRsp OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The aibadgerRsp is the descriptive string for the aibadger status." ::= { aibadgerInfo 5 } aibadgerTrapAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The aibadgerTrapAck contains trap ID related information if the trap needs to be acknowledged by the manager." ::= { aibadgerInfo 6 } aibadgerTest OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "The aibadgerTest is for testing the SNMP get and set command for SNMP. Whenever this string is changed it will send a trap to the SNMP manager" ::= { aibadgerInfo 7 } deviceTbl OBJECT-TYPE SYNTAX SEQUENCE OF DeviceTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the network element devices connected to the SAM board" ::= { aibadger 2 } deviceTblEntry OBJECT-TYPE SYNTAX DeviceTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the deviceTbl." INDEX { devTblIndex } ::= { deviceTbl 1 } DeviceTblEntry ::= SEQUENCE { devTblIndex INTEGER, devName DisplayString, devMacAddr DisplayString, devVersion DisplayString, devBiCnt INTEGER, devAnaCnt INTEGER, devCtrlCnt INTEGER, devStatus DisplayString, devStatusTimeTag DisplayString, devRspStr DisplayString, devTrapAck DisplayString } devTblIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used for identifying instances of the columnar objects in the deviceTbl." ::= { deviceTblEntry 1 } devName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The devName is the name of the BAM or other device in the device table." ::= { deviceTblEntry 2 } devMacAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The devMacAddr is the Mac Address or hardware board related address for the device in the device table." ::= { deviceTblEntry 3 } devVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The devVersion is the hardware and software version for the device in the device table." ::= { deviceTblEntry 4 } devBiCnt OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The devBiCnt is the number of bistate points for the device in the device table." ::= { deviceTblEntry 5 } devAnaCnt OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The devAnaCnt is the number of analog points for the device in the device table." ::= { deviceTblEntry 6 } devCtrlCnt OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The devCtrlCnt is the number of control points for the device in the device table." ::= { deviceTblEntry 7 } devStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The devStatus is current Status for the device in the device table. The possiable values are: working,failed, disabled." ::= { deviceTblEntry 8 } devStatusTimeTag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "The devStatusTimeTag is time stamp of the current status for the device in the device table." ::= { deviceTblEntry 9 } devRspStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The devRspStr is more descriptive string for the current status about this device." ::= { deviceTblEntry 10 } devTrapAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The devTrapAck contains trap ID related information if the trap needs to be acknowledged by the manager." ::= { deviceTblEntry 11 } bistateTbl OBJECT-TYPE SYNTAX SEQUENCE OF BistateTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing all of the bistate points for all of the devices on the aibadger" ::= { aibadger 3 } bistateTblEntry OBJECT-TYPE SYNTAX BistateTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the deviceTbl." INDEX { biTblIndex } ::= { bistateTbl 1 } BistateTblEntry ::= SEQUENCE { biTblIndex INTEGER, biAlmID DisplayString, biDeviceName DisplayString, biNumber INTEGER, biName DisplayString, biStatus DisplayString, biRspStr DisplayString, biStatusTimeTag DisplayString, biTrapAck DisplayString, biField1 DisplayString, biField2 DisplayString } biTblIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used for identifying instances of the columnar objects in the bistateTbl." ::= { bistateTblEntry 1 } biAlmID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..41)) MAX-ACCESS read-only STATUS current DESCRIPTION "The biAlmID is the unique alarm identifier for the aibadger." ::= { bistateTblEntry 2 } biDeviceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The biDeviceName is the name of the device for this bistate point." ::= { bistateTblEntry 3 } biNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The biNumber is the physical number for the bistatepoint." ::= { bistateTblEntry 4 } biName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The biName is the user assigned name for this bistate point." ::= { bistateTblEntry 5 } biStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The biStatus is the current status for this bistate point. The possiable values are: critical, major, minor_b, minor_a, normal, informational, not_defined, maintenance." ::= { bistateTblEntry 6 } biRspStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The biRspStr is the descriptive string for this current status for this bistate point." ::= { bistateTblEntry 7 } biStatusTimeTag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "The biStatusTimeTag is the time stamp for the current status when the status changed for this bistate point." ::= { bistateTblEntry 8 } biTrapAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The biTrapAck contains trap IP related information if the trap needs to be acknowledged by the manager." ::= { bistateTblEntry 9 } biField1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The biField1 holds additional information for each points." ::= { bistateTblEntry 10 } biField2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The biField1 holds additional information for each points." ::= { bistateTblEntry 11 } analogTbl OBJECT-TYPE SYNTAX SEQUENCE OF AnalogTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing all of the analog alarms for all the devices on the aibadger." ::= { aibadger 4 } analogTblEntry OBJECT-TYPE SYNTAX AnalogTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the analog table." INDEX { anaTblIndex } ::= { analogTbl 1 } AnalogTblEntry ::= SEQUENCE { anaTblIndex INTEGER, anaAlmID DisplayString, anaDeviceName DisplayString, anaNumber INTEGER, anaName DisplayString, anaStatus DisplayString, anaRspStr DisplayString, anaStatusTimeTag DisplayString, anaValue DisplayString, anaThreshold DisplayString, anaTrapAck DisplayString, anaField1 DisplayString, anaField2 DisplayString } anaTblIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used for identifying instances of the columnar objects in the analogTbl." ::= { analogTblEntry 1 } anaAlmID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..41)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaAlmID is the unique alarm identifier for the aibadger." ::= { analogTblEntry 2 } anaDeviceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaDeviceName is the name of the device for this analog point." ::= { analogTblEntry 3 } anaNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaNumber is the physical number for the analog point." ::= { analogTblEntry 4 } anaName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaName is the user assigned name for this analog point." ::= { analogTblEntry 5 } anaStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaStatus is the current status for this analog point. The possiable values are: critical, major, minor_b, minor_a, normal, informational, not_defined, maintenance." ::= { analogTblEntry 6 } anaRspStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaRspStr is the descriptive string for this current status for this analog point." ::= { analogTblEntry 7 } anaStatusTimeTag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaStatusTimeTag is the time stamp for the current status when the status changed for this analog point." ::= { analogTblEntry 8 } anaValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaValue is the current value for this analog point." ::= { analogTblEntry 9 } anaThreshold OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaThreshold is the threshold for this analog point indicating the off-normal and normal value range." ::= { analogTblEntry 10 } anaTrapAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The anaTrapAck contains trap ID related information if the trap needs to be acknowledged by the manager ." ::= { analogTblEntry 11 } anaField1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaField1 holds additional information for each points." ::= { analogTblEntry 12 } anaField2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The anaField1 holds additional information for each points." ::= { analogTblEntry 13 } controlTbl OBJECT-TYPE SYNTAX SEQUENCE OF ControlTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing all of the control points for all the devices on the aibadger" ::= { aibadger 5 } controlTblEntry OBJECT-TYPE SYNTAX ControlTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the control points table." INDEX { ctrlTblIndex } ::= { controlTbl 1 } ControlTblEntry ::= SEQUENCE { ctrlTblIndex INTEGER, ctrlAlmID DisplayString, ctrlDeviceName DisplayString, ctrlNumber INTEGER, ctrlName DisplayString, ctrlStatus DisplayString, ctrlRspStr DisplayString, ctrlStatusTimeTag DisplayString, ctrlState INTEGER, ctrlTrapAck DisplayString, ctrlField1 DisplayString, ctrlField2 DisplayString } ctrlTblIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used for identifying instances of the columnar objects in the ctrlstateTbl." ::= { controlTblEntry 1 } ctrlAlmID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..41)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlAlmID is the unique alarm identifier for the aibadger." ::= { controlTblEntry 2 } ctrlDeviceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlDeviceName is the name of the device for this control point." ::= { controlTblEntry 3 } ctrlNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlNumber is the physical number for the control point." ::= { controlTblEntry 4 } ctrlName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlName is the user assigned name for this control point." ::= { controlTblEntry 5 } ctrlStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlStatus is the current status for this control point. The possiable values are: critical, major, minor_b, minor_a, normal, informational, not_defined, maintenance." ::= { controlTblEntry 6 } ctrlRspStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlRspStr is the descriptive string of the current status for this bistate point." ::= { controlTblEntry 7 } ctrlStatusTimeTag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlStatusTimeTag is the time stamp for the current status when the status changed for this bistate point." ::= { controlTblEntry 8 } ctrlState OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "The ctrlState represents the current state of the control point.1--latch off,2--latch on,3--momentary off,4--momentary on." ::= { controlTblEntry 9 } ctrlTrapAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ctrlTrapAck contains trap ID related information if the trap needs to be acknowledged by the manager." ::= { controlTblEntry 10 } ctrlField1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlField1 holds additional information for the point." ::= { controlTblEntry 11 } ctrlField2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ctrlField1 holds additional information for the point." ::= { controlTblEntry 12 } snmpManagerTbl OBJECT-TYPE SYNTAX SEQUENCE OF SnmpManagerTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing all of SNMP manager's names,IP addresses and community names configured on the aibadger" ::= { aibadger 6 } snmpManagerTblEntry OBJECT-TYPE SYNTAX SnmpManagerTblEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the snmp manager table." INDEX { name } ::= { snmpManagerTbl 1 } SnmpManagerTblEntry ::= SEQUENCE { snmpTblIndex INTEGER, name DisplayString, ipAddr DisplayString, community DisplayString } snmpTblIndex OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used for identifying instances of the columnar objects in the snmpManagerTbl." ::= { snmpManagerTblEntry 1 } name OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name is the name string for the SNMP manager." ::= { snmpManagerTblEntry 2 } ipAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ipAddr is the IP address for the SNMP manager." ::= { snmpManagerTblEntry 3 } community OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The commnity is the community name string for the SNMP manager." ::= { snmpManagerTblEntry 4 } snmpSettings OBJECT IDENTIFIER ::= { aibadger 7 } trapVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) MAX-ACCESS read-only STATUS current DESCRIPTION "The trapVer is the SNMP trap version the aibadger is configured to send. The possiable values are v1, v2." ::= { snmpSettings 1 } trapControl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The trapControl indicates the aibadger is configured to enable or disable all traps. The possiable values are enable or disable." ::= { snmpSettings 2 } trapSerControl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The trapSerControl is the severity threshold that triggers a trap if trap control is enabled on the aibadger. The possiable severity values are: critical,major,minor_a,minor_b" ::= { snmpSettings 3 } ackControl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ackControl indicates if the aibadger is configured to expect an acknowlegement from an SNMP manager when it sends a trap. The SNMP manager must support this feature if you enable ackControl on the aibadger. The possiable values for ackControl are enable or disable." ::= { snmpSettings 4 } ackSerControl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ackSerControl is the trap severity threshold that enables an acknowlegement from a SNMP manager if the ackControl is enabled on the aibadger. The SNMP manager must support this feature. The possiable severity values are: critical, major,minor_a,minor_b" ::= { snmpSettings 5 } aibadgerTraps OBJECT IDENTIFIER ::= { aibadger 8 } healthTrap OBJECT IDENTIFIER ::= { aibadgerTraps 1 } bistateTrap OBJECT IDENTIFIER ::= { aibadgerTraps 2 } analogTrap OBJECT IDENTIFIER ::= { aibadgerTraps 3 } controlTrap OBJECT IDENTIFIER ::= { aibadgerTraps 4 } testTrap OBJECT IDENTIFIER ::= { aibadgerTraps 5 } devTrap OBJECT IDENTIFIER ::= { aibadgerTraps 6 } healthCheck NOTIFICATION-TYPE OBJECTS { aibadgerStatus, aibadgerRsp, aibadgerSAMVer,aibadgerTimeTag } STATUS current DESCRIPTION "The SNMP trap is generated every 24 hours to indicate that the SAM board is still there." ::= { healthTrap 1 } maintenaceBistateTrap NOTIFICATION-TYPE OBJECTS { biAlmID,biStatus,biDeviceName, biNumber,biName,biRspStr,biStatusTimeTag, biField1,biField2} STATUS current DESCRIPTION "The SNMP trap is generated when a bistate point has change of state and it is currently in maintenance state." ::= { bistateTrap 1 } notDefinedBistateTrap NOTIFICATION-TYPE OBJECTS { biAlmID,biStatus,biDeviceName, biNumber,biName,biRspStr,biStatusTimeTag, biField1,biField2} STATUS current DESCRIPTION "The SNMP trap is generated when a bistate point has change of state and it is currently in not-defined state." ::= { bistateTrap 2 } infoBistateTrap NOTIFICATION-TYPE OBJECTS { biAlmID,biStatus,biDeviceName, biNumber,biName,biRspStr,biStatusTimeTag, biField1,biField2} STATUS current DESCRIPTION "The SNMP trap is generated when a bistate point has change of state and it is currently in informational state." ::= { bistateTrap 3 } normalBistateTrap NOTIFICATION-TYPE OBJECTS { biAlmID,biStatus,biDeviceName, biNumber,biName,biRspStr,biStatusTimeTag, biField1,biField2} STATUS current DESCRIPTION "The SNMP trap is generated when a bistate point has change of state and it is currently in normal state." ::= { bistateTrap 4 } minorAbistatetrap NOTIFICATION-TYPE OBJECTS { biAlmID,biStatus,biDeviceName, biNumber,biName,biRspStr,biStatusTimeTag, biField1,biField2} STATUS current DESCRIPTION "The SNMP trap is generated when a bistate point has change of state and it is currently in minor_a state." ::= { bistateTrap 5 } minorBbistatetrap NOTIFICATION-TYPE OBJECTS { biAlmID,biStatus,biDeviceName, biNumber,biName,biRspStr,biStatusTimeTag, biField1,biField2} STATUS current DESCRIPTION "The SNMP trap is generated when a bistate point has change of state and it is currently in minor_b state." ::= { bistateTrap 6 } majorBistateTrap NOTIFICATION-TYPE OBJECTS { biAlmID,biStatus,biDeviceName, biNumber,biName,biRspStr,biStatusTimeTag, biField1,biField2} STATUS current DESCRIPTION "The SNMP trap is generated when a bistate point has change of state and it is currently in major state." ::= { bistateTrap 7 } criticalBistateTrap NOTIFICATION-TYPE OBJECTS { biAlmID,biStatus,biDeviceName, biNumber,biName,biRspStr,biStatusTimeTag, biField1,biField2} STATUS current DESCRIPTION "The SNMP trap is generated when a bistate point has change of state and it is currently in critical state." ::= { bistateTrap 8 } maintenanceAnalogTrap NOTIFICATION-TYPE OBJECTS { anaAlmID,anaStatus,anaDeviceName, anaNumber,anaName,anaValue,anaThreshold, anaRspStr,anaStatusTimeTag,anaField1, anaField2} STATUS current DESCRIPTION "The SNMP trap is generated when an analog point value crosses its threshold and it is currently in maintenance mode." ::= { analogTrap 1 } notDefinedAnalogTrap NOTIFICATION-TYPE OBJECTS { anaAlmID,anaStatus,anaDeviceName, anaNumber,anaName,anaValue,anaThreshold, anaRspStr,anaStatusTimeTag,anaField1, anaField2} STATUS current DESCRIPTION "The SNMP trap is generated when an analog point value crosses its threshold and it is currently in not-defined state." ::= { analogTrap 2 } infoAnalogTrap NOTIFICATION-TYPE OBJECTS { anaAlmID,anaStatus,anaDeviceName, anaNumber,anaName,anaValue,anaThreshold, anaRspStr,anaStatusTimeTag,anaField1, anaField2} STATUS current DESCRIPTION "The SNMP trap is generated when an analog point value crosses its threshold and it is currently in informational state." ::= { analogTrap 3 } normalAnalogTrap NOTIFICATION-TYPE OBJECTS { anaAlmID,anaStatus,anaDeviceName, anaNumber,anaName,anaValue,anaThreshold, anaRspStr,anaStatusTimeTag,anaField1, anaField2} STATUS current DESCRIPTION "The SNMP trap is generated when an analog point value crosses its threshold and it is currently in normal state." ::= { analogTrap 4 } minorAanalogtrap NOTIFICATION-TYPE OBJECTS { anaAlmID,anaStatus,anaDeviceName, anaNumber,anaName,anaValue,anaThreshold, anaRspStr,anaStatusTimeTag,anaField1, anaField2} STATUS current DESCRIPTION "The SNMP trap is generated when an analog point value crosses its threshold and it is currently in minor_a state." ::= { analogTrap 5 } minorBanalogtrap NOTIFICATION-TYPE OBJECTS { anaAlmID,anaStatus,anaDeviceName, anaNumber,anaName,anaValue,anaThreshold, anaRspStr,anaStatusTimeTag,anaField1, anaField2} STATUS current DESCRIPTION "The SNMP trap is generated when an analog point value crosses its threshold and it is currently in minor_b state." ::= { analogTrap 6 } majorAnalogTrap NOTIFICATION-TYPE OBJECTS { anaAlmID,anaStatus,anaDeviceName, anaNumber,anaName,anaValue,anaThreshold, anaRspStr,anaStatusTimeTag,anaField1, anaField2} STATUS current DESCRIPTION "The SNMP trap is generated when an analog point value crosses its threshold and it is currently in major state." ::= { analogTrap 7 } criticalAnalogTrap NOTIFICATION-TYPE OBJECTS { anaAlmID,anaStatus,anaDeviceName, anaNumber,anaName,anaValue,anaThreshold, anaRspStr,anaStatusTimeTag,anaField1, anaField2} STATUS current DESCRIPTION "The SNMP trap is generated when an analog point value crosses its threshold and it is currently in critical state." ::= { analogTrap 8 } maintenanceControlTrap NOTIFICATION-TYPE OBJECTS {ctrlAlmID,ctrlStatus,ctrlDeviceName, ctrlNumber,ctrlRspStr,ctrlStatusTimeTag, ctrlField1,ctrlField2} STATUS current DESCRIPTION "The SNMP trap is generated when a control point has a change of state and it is in maintenance state." ::= { controlTrap 1 } notDefinedControlTrap NOTIFICATION-TYPE OBJECTS {ctrlAlmID,ctrlStatus,ctrlDeviceName, ctrlNumber,ctrlRspStr,ctrlStatusTimeTag, ctrlField1,ctrlField2} STATUS current DESCRIPTION "The SNMP trap is generated when a control point has a change of state and it is currently in not-defined state." ::= { controlTrap 2 } infoControlTrap NOTIFICATION-TYPE OBJECTS {ctrlAlmID,ctrlStatus,ctrlDeviceName, ctrlNumber,ctrlRspStr,ctrlStatusTimeTag, ctrlField1,ctrlField2} STATUS current DESCRIPTION "The SNMP trap is generated when a control point has a change of state and it is currently in informational state." ::= { controlTrap 3 } normalControlTrap NOTIFICATION-TYPE OBJECTS {ctrlAlmID,ctrlStatus,ctrlDeviceName, ctrlNumber,ctrlRspStr,ctrlStatusTimeTag, ctrlField1,ctrlField2} STATUS current DESCRIPTION "The SNMP trap is generated when a control point has a change of state and it is currently in normal state." ::= { controlTrap 4 } minorAcontroltrap NOTIFICATION-TYPE OBJECTS {ctrlAlmID,ctrlStatus,ctrlDeviceName, ctrlNumber,ctrlRspStr,ctrlStatusTimeTag, ctrlField1,ctrlField2} STATUS current DESCRIPTION "The SNMP trap is generated when a control point has a change of state and it is currently in minor_a state." ::= { controlTrap 5 } minorBcontroltrap NOTIFICATION-TYPE OBJECTS {ctrlAlmID,ctrlStatus,ctrlDeviceName, ctrlNumber,ctrlRspStr,ctrlStatusTimeTag, ctrlField1,ctrlField2} STATUS current DESCRIPTION "The SNMP trap is generated when a control point has a change of state and it is currently in minor_b state." ::= { controlTrap 6 } majorControlTrap NOTIFICATION-TYPE OBJECTS {ctrlAlmID,ctrlStatus,ctrlDeviceName, ctrlNumber,ctrlRspStr,ctrlStatusTimeTag, ctrlField1,ctrlField2} STATUS current DESCRIPTION "The SNMP trap is generated when a control point has a change of state and it is currently in major state." ::= { controlTrap 7 } criticalControlTrap NOTIFICATION-TYPE OBJECTS {ctrlAlmID,ctrlStatus,ctrlDeviceName, ctrlNumber,ctrlRspStr,ctrlStatusTimeTag, ctrlField1,ctrlField2} STATUS current DESCRIPTION "The SNMP trap is generated when a control point has a change of state and it is currently in critical state." ::= { controlTrap 8 } testTraps NOTIFICATION-TYPE OBJECTS { aibadgerTest } STATUS current DESCRIPTION "The SNMP trap is generated when the aibadgerTest String changes." ::= { testTrap 1 } normalDeviceResumeTrap NOTIFICATION-TYPE OBJECTS { devName,devStatus, devStatusTimeTag ,devRspStr} STATUS current DESCRIPTION "The SNMP trap is generated when the device status changes from fail state to resume state." ::= { devTrap 1 } criticalDeviceFailTrap NOTIFICATION-TYPE OBJECTS { devName,devStatus, devStatusTimeTag ,devRspStr} STATUS current DESCRIPTION "The SNMP trap is generated when the communication with the device fails." ::= { devTrap 2 } END